From f16f97404834fd3a6ca35b696f5309bcd0e0797b Mon Sep 17 00:00:00 2001 From: luz paz Date: Fri, 23 Oct 2020 11:27:41 -0400 Subject: [PATCH] Sketcher: Capitalize opeCommand() text [skip-ci] --- src/Mod/Sketcher/Gui/CommandConstraints.cpp | 144 ++++++++++---------- 1 file changed, 72 insertions(+), 72 deletions(-) diff --git a/src/Mod/Sketcher/Gui/CommandConstraints.cpp b/src/Mod/Sketcher/Gui/CommandConstraints.cpp index 5fbf0d4b6ba4..f866ebb109ce 100644 --- a/src/Mod/Sketcher/Gui/CommandConstraints.cpp +++ b/src/Mod/Sketcher/Gui/CommandConstraints.cpp @@ -1120,7 +1120,7 @@ void CmdSketcherConstrainHorizontal::activated(int iMsg) // if there is at least one edge selected, ignore the point alignment functionality if (!edgegeoids.empty()) { // undo command open - openCommand("add horizontal constraint"); + openCommand("Add horizontal constraint"); for (std::vector::iterator it=edgegeoids.begin(); it != edgegeoids.end(); it++) { // issue the actual commands to create the constraint Gui::cmdAppObjectArgs(selection[0].getObject(), @@ -1129,7 +1129,7 @@ void CmdSketcherConstrainHorizontal::activated(int iMsg) } else if (fixedpoints <= 1) { // pointgeoids // undo command open - openCommand("add horizontal alignment"); + openCommand("Add horizontal alignment"); std::vector::iterator it; std::vector::iterator itp; for (it=pointgeoids.begin(), itp=pointpos.begin(); it != std::prev(pointgeoids.end()) && itp != std::prev(pointpos.end()); it++,itp++) { @@ -1195,7 +1195,7 @@ void CmdSketcherConstrainHorizontal::applyConstraint(std::vector &sel } // undo command open - Gui::Command::openCommand("add horizontal constraint"); + Gui::Command::openCommand("Add horizontal constraint"); // issue the actual commands to create the constraint Gui::cmdAppObjectArgs(sketchgui->getObject(), "addConstraint(Sketcher.Constraint('Horizontal',%d)) ",CrvId); // finish the transaction and update @@ -1357,7 +1357,7 @@ void CmdSketcherConstrainVertical::activated(int iMsg) // if there is at least one edge selected, ignore the point alignment functionality if (!edgegeoids.empty()) { // undo command open - openCommand("add vertical constraint"); + openCommand("Add vertical constraint"); for (std::vector::iterator it=edgegeoids.begin(); it != edgegeoids.end(); it++) { // issue the actual commands to create the constraint Gui::cmdAppObjectArgs(selection[0].getObject(),"addConstraint(Sketcher.Constraint('Vertical',%d)) ", *it); @@ -1365,7 +1365,7 @@ void CmdSketcherConstrainVertical::activated(int iMsg) } else if (fixedpoints <= 1) { // vertex mode, maximum one fixed point // undo command open - openCommand("add vertical alignment"); + openCommand("Add vertical alignment"); std::vector::iterator it; std::vector::iterator itp; for (it=pointgeoids.begin(), itp=pointpos.begin(); it != std::prev(pointgeoids.end()) && itp != std::prev(pointpos.end()); it++,itp++) { @@ -1431,7 +1431,7 @@ void CmdSketcherConstrainVertical::applyConstraint(std::vector &selSe } // undo command open - Gui::Command::openCommand("add vertical constraint"); + Gui::Command::openCommand("Add vertical constraint"); // issue the actual commands to create the constraint Gui::cmdAppObjectArgs(sketchgui->getObject(), "addConstraint(Sketcher.Constraint('Vertical',%d)) ", CrvId); // finish the transaction and update @@ -1656,7 +1656,7 @@ void CmdSketcherConstrainLock::applyConstraint(std::vector &selSeq, i Base::Vector3d pnt = Obj->getPoint(selSeq.front().GeoId, selSeq.front().PosId); // undo command open - Gui::Command::openCommand("add fixed constraint"); + Gui::Command::openCommand("Add fixed constraint"); Gui::cmdAppObjectArgs(sketchgui->getObject(), "addConstraint(Sketcher.Constraint('DistanceX', %d, %d, %f)) ", selSeq.front().GeoId, selSeq.front().PosId, pnt.x); Gui::cmdAppObjectArgs(sketchgui->getObject(), "addConstraint(Sketcher.Constraint('DistanceY', %d, %d, %f)) ", @@ -1842,7 +1842,7 @@ void CmdSketcherConstrainBlock::applyConstraint(std::vector &selSeq, } // undo command open - openCommand("add block constraint"); + openCommand("Add block constraint"); try { @@ -1988,7 +1988,7 @@ class DrawSketchHandlerCoincident: public DrawSketchHandler Sketcher::SketchObject* Obj = static_cast(sketchgui->getObject()); // undo command open - Gui::Command::openCommand("add coincident constraint"); + Gui::Command::openCommand("Add coincident constraint"); // check if this coincidence is already enforced (even indirectly) bool constraintExists = Obj->arePointsCoincident(GeoId1,PosId1,GeoId2,PosId2); @@ -2088,7 +2088,7 @@ void CmdSketcherConstrainCoincident::activated(int iMsg) // undo command open bool constraintsAdded = false; - openCommand("add coincident constraint"); + openCommand("Add coincident constraint"); for (std::size_t i=1; iFirst == GeoId1 && (*it)->Second == GeoId2) || ((*it)->Second == GeoId1 && (*it)->First == GeoId2)) ) { - Gui::Command::openCommand("swap edge tangency with ptp tangency"); + Gui::Command::openCommand("Swap edge tangency with ptp tangency"); if(constraintExists) { // try to remove any pre-existing direct coincident constraints @@ -2177,7 +2177,7 @@ void CmdSketcherConstrainCoincident::applyConstraint(std::vector &sel } // undo command open - Gui::Command::openCommand("add coincident constraint"); + Gui::Command::openCommand("Add coincident constraint"); // check if this coincidence is already enforced (even indirectly) bool constraintExists = Obj->arePointsCoincident(GeoId1, PosId1, GeoId2, PosId2); @@ -2283,7 +2283,7 @@ void CmdSketcherConstrainDistance::activated(int iMsg) if (GeoId1 == Sketcher::GeoEnum::HAxis && PosId1 == Sketcher::none) { PosId1 = Sketcher::start; - openCommand("add distance from horizontal axis constraint"); + openCommand("Add distance from horizontal axis constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('DistanceY',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,pnt2.y); @@ -2291,7 +2291,7 @@ void CmdSketcherConstrainDistance::activated(int iMsg) else if (GeoId1 == Sketcher::GeoEnum::VAxis && PosId1 == Sketcher::none) { PosId1 = Sketcher::start; - openCommand("add distance from vertical axis constraint"); + openCommand("Add distance from vertical axis constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('DistanceX',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,pnt2.x); @@ -2299,7 +2299,7 @@ void CmdSketcherConstrainDistance::activated(int iMsg) else { Base::Vector3d pnt1 = Obj->getPoint(GeoId1,PosId1); - openCommand("add point to point distance constraint"); + openCommand("Add point to point distance constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Distance',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,(pnt2-pnt1).Length()); @@ -2334,7 +2334,7 @@ void CmdSketcherConstrainDistance::activated(int iMsg) Base::Vector3d d = pnt2-pnt1; double ActDist = std::abs(-pnt.x*d.y+pnt.y*d.x+pnt1.x*pnt2.y-pnt2.x*pnt1.y) / d.Length(); - openCommand("add point to line Distance constraint"); + openCommand("Add point to line Distance constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Distance',%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,ActDist); @@ -2368,7 +2368,7 @@ void CmdSketcherConstrainDistance::activated(int iMsg) lineSeg = static_cast(geom); double ActLength = (lineSeg->getEndPoint()-lineSeg->getStartPoint()).Length(); - openCommand("add length constraint"); + openCommand("Add length constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Distance',%d,%f)) ", GeoId1,ActLength); @@ -2415,21 +2415,21 @@ void CmdSketcherConstrainDistance::applyConstraint(std::vector &selSe if (GeoId1 == Sketcher::GeoEnum::HAxis && PosId1 == Sketcher::none) { PosId1 = Sketcher::start; - openCommand("add distance from horizontal axis constraint"); + openCommand("Add distance from horizontal axis constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('DistanceY',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,pnt2.y); } else if (GeoId1 == Sketcher::GeoEnum::VAxis && PosId1 == Sketcher::none) { PosId1 = Sketcher::start; - openCommand("add distance from vertical axis constraint"); + openCommand("Add distance from vertical axis constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('DistanceX',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,pnt2.x); } else { Base::Vector3d pnt1 = Obj->getPoint(GeoId1,PosId1); - openCommand("add point to point distance constraint"); + openCommand("Add point to point distance constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('Distance',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,(pnt2-pnt1).Length()); } @@ -2461,7 +2461,7 @@ void CmdSketcherConstrainDistance::applyConstraint(std::vector &selSe lineSeg = static_cast(geom); double ActLength = (lineSeg->getEndPoint()-lineSeg->getStartPoint()).Length(); - openCommand("add length constraint"); + openCommand("Add length constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('Distance',%d,%f)) ", GeoId1,ActLength); @@ -2504,7 +2504,7 @@ void CmdSketcherConstrainDistance::applyConstraint(std::vector &selSe Base::Vector3d d = pnt2-pnt1; double ActDist = std::abs(-pnt.x*d.y+pnt.y*d.x+pnt1.x*pnt2.y-pnt2.x*pnt1.y) / d.Length(); - openCommand("add point to line Distance constraint"); + openCommand("Add point to line Distance constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('Distance',%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,ActDist); @@ -2619,7 +2619,7 @@ void CmdSketcherConstrainPointOnObject::activated(int iMsg) if ((points.size() == 1 && curves.size() >= 1) || (points.size() >= 1 && curves.size() == 1)) { - openCommand("add point on object constraint"); + openCommand("Add point on object constraint"); int cnt = 0; for (std::size_t iPnt = 0; iPnt < points.size(); iPnt++) { for (std::size_t iCrv = 0; iCrv < curves.size(); iCrv++) { @@ -2693,7 +2693,7 @@ void CmdSketcherConstrainPointOnObject::applyConstraint(std::vector & SketcherGui::ViewProviderSketch* sketchgui = static_cast(getActiveGuiDocument()->getInEdit()); Sketcher::SketchObject* Obj = sketchgui->getSketchObject(); - openCommand("add point on object constraint"); + openCommand("Add point on object constraint"); bool allOK = true; if (areBothPointsOrSegmentsFixed(Obj, GeoIdVt, GeoIdCrv)){ @@ -2853,7 +2853,7 @@ void CmdSketcherConstrainDistanceX::activated(int iMsg) ActLength = -ActLength; } - openCommand("add point to point horizontal distance constraint"); + openCommand("Add point to point horizontal distance constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('DistanceX',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,ActLength); @@ -2884,7 +2884,7 @@ void CmdSketcherConstrainDistanceX::activated(int iMsg) arebothpointsorsegmentsfixed=isPointOrSegmentFixed(Obj,GeoId1); - openCommand("add fixed x-coordinate constraint"); + openCommand("Add fixed x-coordinate constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('DistanceX',%d,%d,%f)) ", GeoId1,PosId1,ActX); @@ -2955,7 +2955,7 @@ void CmdSketcherConstrainDistanceX::applyConstraint(std::vector &selS ActLength = -ActLength; } - openCommand("add point to point horizontal distance constraint"); + openCommand("Add point to point horizontal distance constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('DistanceX',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,ActLength); @@ -3102,7 +3102,7 @@ void CmdSketcherConstrainDistanceY::activated(int iMsg) ActLength = -ActLength; } - openCommand("add point to point vertical distance constraint"); + openCommand("Add point to point vertical distance constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(),"addConstraint(Sketcher.Constraint('DistanceY',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,ActLength); @@ -3132,7 +3132,7 @@ void CmdSketcherConstrainDistanceY::activated(int iMsg) arebothpointsorsegmentsfixed=isPointOrSegmentFixed(Obj,GeoId1); - openCommand("add fixed y-coordinate constraint"); + openCommand("Add fixed y-coordinate constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('DistanceY',%d,%d,%f)) ", GeoId1,PosId1,ActY); @@ -3204,7 +3204,7 @@ void CmdSketcherConstrainDistanceY::applyConstraint(std::vector &selS ActLength = -ActLength; } - openCommand("add point to point vertical distance constraint"); + openCommand("Add point to point vertical distance constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('DistanceY',%d,%d,%d,%d,%f)) ", GeoId1,PosId1,GeoId2,PosId2,ActLength); @@ -3333,7 +3333,7 @@ void CmdSketcherConstrainParallel::activated(int iMsg) } // undo command open - openCommand("add parallel constraint"); + openCommand("Add parallel constraint"); for (int i=0; i < int(ids.size()-1); i++) { Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Parallel',%d,%d)) ", ids[i],ids[i+1]); @@ -3374,7 +3374,7 @@ void CmdSketcherConstrainParallel::applyConstraint(std::vector &selSe } // undo command open - openCommand("add parallel constraint"); + openCommand("Add parallel constraint"); Gui::cmdAppObjectArgs(sketchgui->getObject(), "addConstraint(Sketcher.Constraint('Parallel',%d,%d)) ", GeoId1, GeoId2); // finish the transaction and update @@ -3492,7 +3492,7 @@ void CmdSketcherConstrainPerpendicular::activated(int iMsg) if (isEdge(GeoId1, PosId1) && isEdge(GeoId2, PosId2) && isVertex(GeoId3, PosId3)) { - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); try{ //add missing point-on-object constraints @@ -3560,7 +3560,7 @@ void CmdSketcherConstrainPerpendicular::activated(int iMsg) // GeoId1 is the B-spline now } // end of code supports simple B-spline endpoint tangency - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Perpendicular',%d,%d,%d,%d)) ", GeoId1,PosId1,GeoId2,PosId2); commitCommand(); @@ -3591,7 +3591,7 @@ void CmdSketcherConstrainPerpendicular::activated(int iMsg) return; } - openCommand("add perpendicularity constraint"); + openCommand("Add perpendicularity constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Perpendicular',%d,%d,%d)) ", GeoId1,PosId1,GeoId2); commitCommand(); @@ -3702,7 +3702,7 @@ void CmdSketcherConstrainPerpendicular::activated(int iMsg) PoO = Base::Vector3d(center.x+majord*cos(tapprox)*cos(phi)-minord*sin(tapprox)*sin(phi), center.y+majord*cos(tapprox)*sin(phi)+minord*sin(tapprox)*cos(phi), 0); } - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); try { // Add a point @@ -3738,7 +3738,7 @@ void CmdSketcherConstrainPerpendicular::activated(int iMsg) } - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Perpendicular',%d,%d)) ", GeoId1,GeoId2); commitCommand(); @@ -3877,7 +3877,7 @@ void CmdSketcherConstrainPerpendicular::applyConstraint(std::vector & PoO = Base::Vector3d(center.x+majord*cos(tapprox)*cos(phi)-minord*sin(tapprox)*sin(phi), center.y+majord*cos(tapprox)*sin(phi)+minord*sin(tapprox)*cos(phi), 0); } - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); try { // Add a point @@ -3911,7 +3911,7 @@ void CmdSketcherConstrainPerpendicular::applyConstraint(std::vector & } - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); Gui::cmdAppObjectArgs(Obj, "addConstraint(Sketcher.Constraint('Perpendicular',%d,%d)) ", GeoId1,GeoId2); commitCommand(); @@ -3947,7 +3947,7 @@ void CmdSketcherConstrainPerpendicular::applyConstraint(std::vector & if (isEdge(GeoId1, PosId1) && isEdge(GeoId2, PosId2) && isVertex(GeoId3, PosId3)) { - openCommand("add perpendicular constraint"); + openCommand("Add perpendicular constraint"); try{ //add missing point-on-object constraints @@ -4096,7 +4096,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) if (isEdge(GeoId1, PosId1) && isEdge(GeoId2, PosId2) && isVertex(GeoId3, PosId3)) { - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); try{ //add missing point-on-object constraints @@ -4148,7 +4148,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) return; } - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); doEndpointTangency(Obj, selection[0], GeoId1, GeoId2, PosId1, PosId2); commitCommand(); tryAutoRecompute(Obj); @@ -4178,7 +4178,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) return; } - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Tangent',%d,%d,%d)) ", GeoId1,PosId1,GeoId2); commitCommand(); @@ -4215,7 +4215,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) int first = (*it)->First; int firstpos = static_cast((*it)->FirstPos); - Gui::Command::openCommand("swap coincident+tangency with ptp tangency"); + Gui::Command::openCommand("Swap coincident+tangency with ptp tangency"); doEndpointTangency(Obj, selection[0], (*it)->First, (*it)->Second, (*it)->FirstPos, (*it)->SecondPos); @@ -4252,21 +4252,21 @@ void CmdSketcherConstrainTangent::activated(int iMsg) geom2->getTypeId() == Part::GeomCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToEllipseviaNewPoint(Obj,static_cast(geom1), geom2, GeoId1, GeoId2); getSelection().clearSelection(); return; } else if( geom2->getTypeId() == Part::GeomArcOfHyperbola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfHyperbolaviaNewPoint(Obj, static_cast(geom2), geom1, GeoId2, GeoId1); getSelection().clearSelection(); return; } else if( geom2->getTypeId() == Part::GeomArcOfParabola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj,static_cast(geom2), geom1, GeoId2, GeoId1); getSelection().clearSelection(); @@ -4290,7 +4290,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomLineSegment::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfEllipseviaNewPoint(Obj, static_cast(geom1), geom2, GeoId1, GeoId2); @@ -4298,7 +4298,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) return; } else if( geom2->getTypeId() == Part::GeomArcOfParabola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj, static_cast(geom2), geom1, GeoId2, GeoId1); @@ -4323,7 +4323,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomLineSegment::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfHyperbolaviaNewPoint(Obj, static_cast(geom1), geom2, GeoId1, GeoId2); @@ -4331,7 +4331,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) return; } else if( geom2->getTypeId() == Part::GeomArcOfParabola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj, static_cast(geom2), geom1, GeoId2, GeoId1); @@ -4358,7 +4358,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomLineSegment::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj, static_cast(geom1), geom2, GeoId1, GeoId2); getSelection().clearSelection(); @@ -4366,7 +4366,7 @@ void CmdSketcherConstrainTangent::activated(int iMsg) } } - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Tangent',%d,%d)) ", GeoId1,GeoId2); @@ -4438,21 +4438,21 @@ void CmdSketcherConstrainTangent::applyConstraint(std::vector &selSeq geom2->getTypeId() == Part::GeomCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToEllipseviaNewPoint(Obj, static_cast(geom1), geom2, GeoId1, GeoId2); getSelection().clearSelection(); return; } else if( geom2->getTypeId() == Part::GeomArcOfHyperbola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfHyperbolaviaNewPoint(Obj, static_cast(geom2), geom1, GeoId2, GeoId1); getSelection().clearSelection(); return; } else if( geom2->getTypeId() == Part::GeomArcOfParabola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj, static_cast(geom2), geom1, GeoId2, GeoId1); getSelection().clearSelection(); @@ -4476,14 +4476,14 @@ void CmdSketcherConstrainTangent::applyConstraint(std::vector &selSeq geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomLineSegment::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfHyperbolaviaNewPoint(Obj, static_cast(geom1), geom2, GeoId1, GeoId2); getSelection().clearSelection(); return; } else if( geom2->getTypeId() == Part::GeomArcOfParabola::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj, static_cast(geom2), geom1, GeoId2, GeoId1); getSelection().clearSelection(); @@ -4509,7 +4509,7 @@ void CmdSketcherConstrainTangent::applyConstraint(std::vector &selSeq geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() || geom2->getTypeId() == Part::GeomLineSegment::getClassTypeId() ) { - Gui::Command::openCommand("add tangent constraint point"); + Gui::Command::openCommand("Add tangent constraint point"); makeTangentToArcOfParabolaviaNewPoint(Obj, static_cast(geom1), geom2, GeoId1, GeoId2); getSelection().clearSelection(); @@ -4517,7 +4517,7 @@ void CmdSketcherConstrainTangent::applyConstraint(std::vector &selSeq } } - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); Gui::cmdAppObjectArgs(Obj, "addConstraint(Sketcher.Constraint('Tangent',%d,%d)) ", GeoId1,GeoId2); commitCommand(); @@ -4575,7 +4575,7 @@ void CmdSketcherConstrainTangent::applyConstraint(std::vector &selSeq // GeoId1 is the B-spline now } // end of code supports simple B-spline endpoint tangency - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); Gui::cmdAppObjectArgs(Obj, "addConstraint(Sketcher.Constraint('Tangent',%d,%d,%d,%d)) ", GeoId1,PosId1,GeoId2,PosId2); commitCommand(); @@ -4590,7 +4590,7 @@ void CmdSketcherConstrainTangent::applyConstraint(std::vector &selSeq if (isEdge(GeoId1, PosId1) && isEdge(GeoId2, PosId2) && isVertex(GeoId3, PosId3)) { - openCommand("add tangent constraint"); + openCommand("Add tangent constraint"); try{ //add missing point-on-object constraints @@ -6298,7 +6298,7 @@ void CmdSketcherConstrainEqual::activated(int iMsg) } // undo command open - openCommand("add equality constraint"); + openCommand("Add equality constraint"); for (int i=0; i < int(ids.size()-1); i++) { Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Equal',%d,%d)) ", ids[i],ids[i+1]); @@ -6333,7 +6333,7 @@ void CmdSketcherConstrainEqual::applyConstraint(std::vector &selSeq, } // undo command open - openCommand("add equality constraint"); + openCommand("Add equality constraint"); Gui::cmdAppObjectArgs(Obj, "addConstraint(Sketcher.Constraint('Equal',%d,%d)) ", GeoId1, GeoId2); // finish the transaction and update @@ -6449,7 +6449,7 @@ void CmdSketcherConstrainSymmetric::activated(int iMsg) } // undo command open - openCommand("add symmetric constraint"); + openCommand("Add symmetric constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Symmetric',%d,%d,%d,%d,%d,%d)) ", GeoId1,Sketcher::start,GeoId1,Sketcher::end,GeoId2,PosId2); @@ -6501,7 +6501,7 @@ void CmdSketcherConstrainSymmetric::activated(int iMsg) } // undo command open - openCommand("add symmetric constraint"); + openCommand("Add symmetric constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Symmetric',%d,%d,%d,%d,%d)) ", GeoId1,PosId1,GeoId2,PosId2,GeoId3); @@ -6517,7 +6517,7 @@ void CmdSketcherConstrainSymmetric::activated(int iMsg) } else if (isVertex(GeoId3,PosId3)) { // undo command open - openCommand("add symmetric constraint"); + openCommand("Add symmetric constraint"); Gui::cmdAppObjectArgs(selection[0].getObject(), "addConstraint(Sketcher.Constraint('Symmetric',%d,%d,%d,%d,%d,%d)) ", GeoId1,PosId1,GeoId2,PosId2,GeoId3,PosId3); @@ -6588,7 +6588,7 @@ void CmdSketcherConstrainSymmetric::applyConstraint(std::vector &selS } // undo command open - openCommand("add symmetric constraint"); + openCommand("Add symmetric constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('Symmetric',%d,%d,%d,%d,%d)) ", GeoId1,PosId1,GeoId2,PosId2,GeoId3); @@ -6623,7 +6623,7 @@ void CmdSketcherConstrainSymmetric::applyConstraint(std::vector &selS } // undo command open - openCommand("add symmetric constraint"); + openCommand("Add symmetric constraint"); Gui::cmdAppObjectArgs(Obj,"addConstraint(Sketcher.Constraint('Symmetric',%d,%d,%d,%d,%d,%d)) ", GeoId1,PosId1,GeoId2,PosId2,GeoId3,PosId3); @@ -6755,7 +6755,7 @@ void CmdSketcherConstrainSnellsLaw::activated(int iMsg) n2divn1 = newQuant.getValue(); //add constraint - openCommand("add Snell's law constraint"); + openCommand("Add Snell's law constraint"); if (! IsPointAlreadyOnCurve(GeoId2,GeoId1,PosId1,Obj)) Gui::cmdAppObjectArgs(selection[0].getObject(), @@ -6964,7 +6964,7 @@ void CmdSketcherConstrainInternalAlignment::activated(int iMsg) if((!(focus1 && focus2) && pointids.size() >= 1) || (!(major && minor) && lineids.size() >= 1) ){ - openCommand("add internal alignment constraint"); + openCommand("Add internal alignment constraint"); if(pointids.size()>=1) { @@ -7142,7 +7142,7 @@ void CmdSketcherConstrainInternalAlignment::activated(int iMsg) if((!(focus1 && focus2) && pointids.size() >= 1) || (!(major && minor) && lineids.size() >= 1) ){ - openCommand("add internal alignment constraint"); + openCommand("Add internal alignment constraint"); if(pointids.size()>=1) {