[Russian] Руководство по Solidity
🛑 This wiki has now been deprecated. Please visit ethereum.org for up-to-date information on Ethereum. 🛑
Contents
- Некоторые примеры
- Разметка исходного файла Solidity
- Структура контракта Solidity
- Типы
- Syntactic Sugar and Globally Available Variables
- Управляющие структуры
- Контракты
- Miscellaneous
исходный текст Solidity Tutorial, 05.10.2015
Solidity - это высокоуровневый язык для виртуальной машины Ethereum с синтаксисом, похожим на JavaScript. Это учебное руководство обеспечивает основное введение в Solidity и предполагает некоторое знание Виртуальной машины Ethereum и программирования в целом. Оно не касается таких функций как естественная спецификация языка или формальная верификация и не является заключительной спецификацией языка.
Можно начать использовать Solidity в браузере без потребности загружать или компилировать что-либо. Это приложение только поддерживает компиляцию - если Вы хотите выполнить код или ввести его в блокчейн, необходимо использовать клиент, такой как например Geth или AlethZero.
Быстрые ссылки:
Оглавление
- Некоторые примеры
- Разметка исходного файла Solidity
- Структура контракта Solidity
- Типы
- Синтаксический сахар и глобально доступные переменные
- Управляющие структуры
- Договоры
- Разное
Давайте начнем с некоторых примеров. Позже мы рассмотрим все подробнее.
contract SimpleStorage {
uint storedData;
function set(uint x) {
storedData = x;
}
function get() constant returns (uint retVal) {
return storedData;
}
}uint storedData объявляет переменную состояния, названную storedData типа uint (целое без знака 256 битов), чья позиция в хранилище автоматически решается компилятором.
Функции set и get используются для изменения и получения значения переменной.
contract Coin {
address minter;
mapping (address => uint) balances;
event Send(address from, address to, uint value);
function Coin() {
minter = msg.sender;
}
function mint(address owner, uint amount) {
if (msg.sender != minter) return;
balances[owner] += amount;
}
function send(address receiver, uint amount) {
if (balances[msg.sender] < amount) return;
balances[msg.sender] -= amount;
balances[receiver] += amount;
Send(msg.sender, receiver, amount);
}
function queryBalance(address addr) constant returns (uint balance) {
return balances[addr];
}
}Настоящий контракт представляет некоторые новые понятия. Одно из них тип address-а, который является 160 битовым значением, не позволяющим арифметические операции.
Кроме того, тип переменной состояния balances отображает адреса на целые числа без знака. Отображения можно представить как хеш-таблицу виртуально инициализированную таким образом, чтобы каждый возможный ключ существовал и отображался в значении, байт-представление которого является нулями. Специальная функция Coin является конструктором, который выполняют во время создания контракта и её нельзя вызвать впоследствии. Она хранит адрес лица, создающего договор вместе с tx и block, msg является волшебной глобальной переменной, содержащей некоторые свойства, предоставляющие доступ к миру за пределами контракта.
Функция queryBalance объявлена как постоянная и таким образом не позволяется изменить состояние контракта(обратите внимание на то, что это не принудительно).
В Solidity возвращаемые параметры наименованы и по существу создают локальную переменную. Таким образом для возврата баланса мы могли бы просто использовать balance = balances[addr]; без какого-либо return. Такие события, как Send, позволяют внешним клиентам искать в блокчейне более эффективно.
Если событие вызывается как в функция Send, этот факт будет сохранен и отображён в блокчейне, мы узнаем больше об этом позже.
Исходный файл Solidity может содержать произвольное число контрактов.
На другие исходные файлы можно сослаться с помощью import "filename";, символы, определенные там, также будут доступны в текущем исходном файле.
Обратите внимание на то, что компилятор в браузере поддерживает не больше одного файла и если Вы используете компилятор командной строки, необходимо явно указать все файлы, которые Вы будете использовать в качестве параметров, компилятор не будет ничего искать в Вашей файловой системе самостоятельно.
Комментарии однострочные комментарии (//) и многострочные комментарии (/*...*/)возможны, в то время как тройная наклонная черта (///) справа перед объявлениями функции производит комментарий
NatSpec (Комментарии NatSepc не освещены здесь).
Контракты в Solidity - то же, что и классы в объектно-ориентированных языках. Они могут содержать так называемые переменные состояния, которые постоянно хранятся в хранилище вместе с контрактом и функциями, указателями входа для работы с этими переменными состояния. Кроме переменных состояния, существуют также локальные переменные, объявленные в функциях, содержание которых очищается как только поток управления возвращается из функции.
Solidity является статически типизированным языком и это означает, что тип каждой переменной(состояния и локальных) должен быть указан (или по крайней мере известен - см. Дедукция типа ниже) во время компиляции. Solidity предоставляет несколько элементарных типов, которые могут быть объединены в составные типы.
Следующие типы также называют типами значения, потому что переменные этих типов будут всегда передаваться по значению, т.е. они всегда копируются, когда они используются в качестве аргументов функции или в присвоениях.
Логический тип
bool: Возможные значения константы true, false
Операторы:
! (логическое отрицание) && (логическая конъюнкция, "and"), || (логическая дизъюнкция, "or"), == (равенство) and != (неравенство). Операторы || и && применяют обычные правила short-circuiting. Это означает, что в выражении f(x) || g(y), если f(x) оценивается как true, g(y) не будет рассмотрен даже если это может иметь побочные эффекты.
Числа
int• / uint•: Целые числа со знаком и без знака различных размеров. Ключевые слова uint8 до uint256 с шагом 8 (Целые числа без знака с 8 до максимум 256 битов) и int8 до int256. uint и int являются псевдонимами для uint256 и int256, соответственно.
Операторы:
Сравнения: <=, <, ==, !=, >=, > (возвращают bool)
Битовые операции: &, |, ^ (Побитовое исключающее ИЛИ), ~ (Побитовое отрицание)
Арифметические операторы: +, -, унарный -, унарный +, *, /, % (Деление с остатком (деление по модулю) ), ** (Возведение в степень)
Адресный тип
address: Содержит 20 байтное значение (размер адреса Ethereum). Адресный тип также имеет члены(см. Функции на адреса) и служит основой для всех контрактов.
Операторы:
<=, <, ==, !=, >= и >.
Массивы фиксированного размера
bytes1, bytes2, bytes3, ..., bytes32: массивы фиксированного размера, byte является псевдонимом для bytes1.
Операторы:
Сравнения: <=, <, ==, !=, >=, > (возвращают bool)
Битовые операции: &, |, ^ (Побитовое исключающее ИЛИ), ~ (Побитовое отрицание)
Динамично измеряемые массивы
bytes: динамично измеряемый массив, см. Массивы. Не является типом значения!
string: динамично измеряемая UTF8-кодированная строка, см. Массивы. Не является типом значения!
Целочисленные Литералы
Целочисленные литералы являются целыми числами произвольной точности, пока они не используются вместе с не-литералом. В var x = 1 - 2;, например, 1 - 2 имеет значение -1, которое присваивается x и таким образом x получает тип int8 -- наименьший тип который может хранить -1, несмотря на то, что естественные типы 1 и 2 фактически uint8.
Возможно даже временно превысить максимум 256 битов до тех пор пока для вычисления используются целочисленные литералы: var x = (0xffffffffffffffffffff * 0xffffffffffffffffffff) * 0; Здесь, x будет иметь значение 0 и таким образом тип uint8.
Строковые Литералы
Строковые литералы записываются с двойными кавычками("abc"). Как с целочисленными литералами, тип может варьироваться, но они неявно конвертируемы в bytes• если помещаются, в bytes и в string.
Операторы инкремента/декремента
Если a LValue (т.е. переменная или что-то, что может быть присвоено), следующие операторы доступны как сокращения:
a += e эквивалентен a = a + e. Операторы -=, *=, /=, %=, a |=, &= и ^= определяются соответственно. a++ и a-- эквивалентны a += 1 / a -= 1, но само выражение все еще имеет предыдущее значение a. Напротив, --a и ++a имеют тот же эффект, но возвращяют значения после изменения.
delete
delete a присваивает a начальное значения для типа. Т.е. для целых чисел это a = 0, но он также может использоваться в массивах, где он присваивает длине динамического массива 0, а статическому - массив той же длины где элементы имеют начальные значения. Для структур он присваивает переменной структуру со сбрасыванием значений для всех элементов.
delete не имеет никакого эффекта на соответствиях(mappings)(поскольку ключи соответствий могут быть произвольными и обычно неизвестны). Таким образом, при удалении структуры, значения всех элементов кроме соответствий будут сброшены(рекурсивно для членов кроме соответсвий). Однако отдельные ключи и то на что они отображаются, могут быть удалены.
Важно отметить, что delete a, в действительности ведет себя как присвоение на a, т.е. хранит новый объект в a.
contract DeleteExample {
uint data;
uint[] dataArray;
function f() {
uint x = data;
delete x; // x = 0, не влияет на data
delete data; // data = 0, не влияет на x, которая все еще содержит копию
uint[] y = dataArray;
delete dataArray; // обнуляет dataArray.length, но поскольку uint[] сложный объект, также
// затронут y, который является псевдонимом к объекту хранилища.
// С другой стороны: «delete y», не действительнo, так как присвоение локальным переменным
// ссылающимся на объекты хранилища может быть сделано только из существующих объектов хранилища.
}
}Если оператор применяется к объектам различного типа, компилятор пытается неявно преобразовать тип одного из объектов к типу другого. (Аналогичное верно и для присвоений). В целом, неявные преобразования между типами возможны, если это имеет смысл семантически, и никакая информация не теряется в ходе преобразования. Например, uint8 может преобразоваться в uint16, int128 вint256, но int8не может быть преобразован в uint256 (Т.к. uint256 не может содержать, например, -1).
Более того, unsigned integers могут быть преобразованы в bytes такого же или большего размера, но не наоборот. Любой тип, который может быть преобразован в uint160, также может быть преобразован и в address.
Если компилятор не позволяет сделать неявное преобразование, но вы знаете, что вы делаете, иногда возможно осуществить явное преобразование типов:
int8 y = -3;
uint x = uint(y);После исполнения этого кода, x будет содержать значение 0xfffff..fd (64 hex символа), которое является двоичным представлением -3.
Если тип явно приводится к типу, меньшего размера, биты более высокого порядка отрезаются:
uint32 a = 0x12345678;
uint16 b = uint16(a); // b будет равен 0x5678Для удобства, не всегда необходимо явно указывать тип переменной. Компилятор может автоматически определять его по типу первого выражения, которое присваивается в переменную.
uint20 x = 0x123;
var y = x;Здесь типом y будет uint20. Использование var недопустимо для параметров функций или возвращаемых параметров.
Необходимо иметь в виду, что тип определяется только по первому присвоению. Например, цикл в следующем примере будет бесконечным, т.к. i присвоится тип uint8, а любое значение этого типа меньше, чем 2000.
for (var i = 0; i < 2000; i++)
{
// do something
}Можно запрашивать баланс адреса, используя переменную balance и посылать Ether
(количество измеряется в wei) на адрес, используя функцию send:
address x = 0x123;
address myAddress = this;
if (x.balance < 10 && myAddress.balance >= 10) x.send(10);Необходимо иметь в виду, что x - это адрес контракта, его код (точнее его функция обратного вызова, если существует) будет исполняться вместе с вызовом send (это ограничение EVM и не может быть предотвращено). Если этот вызов превысит лимит выделенного газа или завершится неудачей по каким-либо другим причинам, отправленные Ether будут возвращены. В этом случае send вернет false.
Более того, взаимодействуя с контрактами, которые не соответствуют ABI (например классический NameReg контракт),
метод call принимает произвольное число аргументов любого типа. Эти аргументы ABI-serialized (т.е. так же дополняется 32 байтами). Одним из исключений является случай, когда первый аргумент кодируется точно в четыре байта. В этом случае он не дополняется, чтобы разрешить использовать здесь сигнатуры функций.
address nameReg = 0x72ba7d8e73fe8eb666ea66babc8116a41bfb10e2;
nameReg.call("register", "MyName");
nameReg.call(bytes4(sha3("fun(uint256)")), a);call возвращает булево значение, показывающее, завершился ли вызов функции успешно (true) или брошено исключение EVM (false). Доступ к возвращенным данным невозможен (для этого нам заранее понадобятся кодировка и размер).
Проще говоря, функция callcode может быть использована: Разница в том, что используется только код данного адреса,
все другие аспекты (хранилище, балланс, ...) взымаются с данных контракта. Цель callcode использовать код библиотеки из иного контракта. Юзер должен убедиться, что расположение хранилища в обоих контрактах подходит для использования callcode кода.
Обе функции call и callcode являются очень низкоуровневыми и должны быть использованы только в крайних случаях, так как они обходят безопасность типов Solidity.
Обратите внимание на то, что контракты наследуют все члены адреса, поэтому вы также можете получить баланс текущего контракта используя такую конструкцию this.balance.
Перечисления - один из путей создания пользовательского типа в Solidity. Они явно конвертируемы в целочисленные типы и обратно, но неявные приведения не разрешены.
contract test {
enum ActionChoices { GoLeft, GoRight, GoStraight, SitStill }
ActionChoices choice;
ActionChoices constant defaultChoice = ActionChoices.GoStraight;
function setGoStraight()
{
choice = ActionChoices.GoStraight;
}
// Так как перечисления не являются частью ABI, сигнатура функции "getChoice"
// будет автоматически заменена на "getChoice() returns (uint8)" для
// всех внешних по отношению к Solidity вызовов. Используемый целочисленный
// тип достаточно большой для хранения всех значений перечисления, т.е. если
// у вас будет больше значений, то будет использоваться `uint16` и так далее.
function getChoice() returns (ActionChoices)
{
return choice;
}
function getDefaultChoice() returns (uint)
{
return uint(defaultChoice);
}
}Complex types, i.e. types which do not always fit into 256 bits have to be handled more carefully than the value-types we have already seen. Since copying them can be quite expensive, we have to think about whether we want them to be stored in memory (which is not persisting) or storage (where the state variables are held).
Every complex type, i.e. arrays and structs, has an additional
annotation, the "data location", about whether it is stored in memory or in storage. Depending on the
context, there is always a default, but it can be overridden by appending
either storage or memory to the type. The default for function parameters (including return parameters) is memory, the default for local variables is storage and the location is forced
to storage for state variables (obviously).
There is also a third data location, "calldata" which is a non-modifyable non-persistent area whether function arguments are stored. Function parameters (not return parameters) of external functions are forced to "calldata" and it behaves mostly like memory.
Data locations are important because they change how assignments behave: Assignments between storage and memory and also to a state variable (even from other state variables) always create an independent copy. Assignments to local storage variables only assign a reference though, and this reference always points to the state variable even if the latter is changed in the meantime. On the other hand, assignments from a memory stored reference type to another memory-stored reference type does not create a copy.
contract c {
uint[] x; // the data location of x is storage
// the data location of memoryArray is memory
function f(uint[] memoryArray) {
x = memoryArray; // works, copies the whole array to storage
var y = x; // works, assigns a pointer, data location of y is storage
y[7]; // fine, returns the 8th element
y.length = 2; // fine, modifies x through y
delete x; // fine, clears the array, also modifies y
// The following does not work; it would need to create a new temporary /
// unnamed array in storage, but storage is "statically" allocated:
// y = memoryArray;
// This does not work either, since it would "reset" the pointer, but there
// is no sensible location it could point to.
// delete y;
g(x); // calls g, handing over a reference to x
h(x); // calls h and creates an independent, temporary copy in memory
}
function g(uint[] storage storageArray) internal {}
function h(uint[] memoryArray) {}
}Summary:
Forced data location:
- parameters (not return) of external functions: calldata
- state variables: storage
Default data location:
- parameters (also return) of functions: memory
- all other local variables: storage
Arrays can have a compile-time fixed size or they can be dynamic. For storage arrays, the element type can be arbitrary (i.e. also other arrays, mappings or structs). For memory arrays, it cannot be a mapping and has to be an ABI type if it is an argument of a publicly-visible function.
An array of fixed size k and element type T is written as T[k],
an array of dynamic size as T[]. As an example, an array of 5 dynamic
arrays of uint is uint[][5] (note that the notation is reversed when
compared to some other languages). To access the second uint in the
third dynamic array, you use x[2][1] (indices are zero-based and
access works in the opposite way of the declaration, i.e. x[2]
shaves off one level in the type from the right).
Arrays have a length member to hold their number of elements.
Dynamic arrays can be resized in storage (not in memory) by changing the
.length member. This does not happen automatically when attempting to access elements outside the current length. The size of memory arrays is fixed (but dynamic, i.e. it can depend on runtime parameters) once they are created.
Variables of type bytes and string are special arrays. A bytes is similar to byte[],
but it is packed tightly in calldata. string is equal to bytes but does not allow
length or index access (for now).
contract ArrayContract {
uint[2**20] m_aLotOfIntegers;
// Note that the following is not a pair of arrays but an array of pairs.
bool[2][] m_pairsOfFlags;
// newPairs is stored in memory - the default for function arguments
function setAllFlagPairs(bool[2][] newPairs) {
// assignment to a storage array replaces the complete array
m_pairsOfFlags = newPairs;
}
function setFlagPair(uint index, bool flagA, bool flagB) {
// access to a non-existing index will throw an exception
m_pairsOfFlags[index][0] = flagA;
m_pairsOfFlags[index][1] = flagB;
}
function changeFlagArraySize(uint newSize) {
// if the new size is smaller, removed array elements will be cleared
m_pairsOfFlags.length = newSize;
}
function clear() {
// these clear the arrays completely
delete m_pairsOfFlags;
delete m_aLotOfIntegers;
// identical effect here
m_pairsOfFlags.length = 0;
}
bytes m_byteData;
function byteArrays(bytes data) {
// byte arrays ("bytes") are different as they are stored without padding,
// but can be treated identical to "uint8[]"
m_byteData = data;
m_byteData.length += 7;
m_byteData[3] = 8;
delete m_byteData[2];
}
}Solidity provides a way to define new types in the form of structs, which is shown in the following example:
contract CrowdFunding {
// Defines a new type with two fields.
struct Funder {
address addr;
uint amount;
}
struct Campaign {
address beneficiary;
uint fundingGoal;
uint numFunders;
uint amount;
mapping (uint => Funder) funders;
}
uint numCampaigns;
mapping (uint => Campaign) campaigns;
function newCampaign(address beneficiary, uint goal) returns (uint campaignID) {
campaignID = numCampaigns++; // campaignID is return variable
// Creates new struct and saves in storage. We leave out the mapping type.
campaigns[campaignID] = Campaign(beneficiary, goal, 0, 0);
}
function contribute(uint campaignID) {
Campaign c = campaigns[campaignID];
// Creates a new temporary memory struct, initialised with the given values
// and copies it over to storage.
// Note that you can also use Funder(msg.sender, msg.value) to initialise.
c.funders[c.numFunders++] = Funder({addr: msg.sender, amount: msg.value});
c.amount += msg.value;
}
function checkGoalReached(uint campaignID) returns (bool reached) {
Campaign c = campaigns[campaignID];
if (c.amount < c.fundingGoal)
return false;
c.beneficiary.send(c.amount);
c.amount = 0;
return true;
}
}The contract does not provide the full functionality of a crowdfunding contract, but it contains the basic concepts necessary to understand structs. Struct types can be used inside mappings and arrays and they can itself contain mappings and arrays.
It is not possible for a struct to contain a member of its own type, although the struct itself can be the value type of a mapping member. This restriction is necessary, as the size of the struct has to be finite.
Note how in all the functions, a struct type is assigned to a local variable (of the default storage data location). This does not copy the struct but only stores a reference so that assignments to members of the local variable actually write to the state.
Of course, you can also directly access the members of the struct without
assigning it to a local variable, as in
campaigns[campaignID].amount = 0.
A literal number can take a suffix of wei, finney, szabo or ether to convert between the subdenominations of ether, where Ether currency numbers without a postfix are assumed to be "wei", e.g. 2 ether == 2000 finney evaluates to true.
Furthermore, suffixes of seconds, minutes, hours, days, weeks and years can be used to convert between units of time where seconds are the base unit and units are converted naively (i.e. a year is always exactly 365 days, etc.).
There are special variables and functions which always exist in the global namespace and are mainly used to provide information about the blockchain.
-
block.coinbase(address): current block miner's address -
block.difficulty(uint): current block difficulty -
block.gaslimit(uint): current block gaslimit -
block.number(uint): current block number -
block.blockhash(function(uint) returns (bytes32)): hash of the given block -
block.timestamp(uint): current block timestamp -
msg.data(bytes): complete calldata -
msg.gas(uint): remaining gas -
msg.sender(address): sender of the message (current call) -
msg.sig(bytes4): first four bytes of the calldata (i.e. function identifier) -
msg.value(uint): number of wei sent with the message -
now(uint): current block timestamp (alias forblock.timestamp) -
tx.gasprice(uint): gas price of the transaction -
tx.origin(address): sender of the transaction (full call chain)
-
sha3(...) returns (bytes32): compute the Ethereum-SHA-3 hash of the (tightly packed) arguments -
sha256(...) returns (bytes32): compute the SHA-256 hash of the (tightly packed) arguments -
ripemd160(...) returns (bytes20): compute RIPEMD-160 hash of the (tightly packed) arguments -
ecrecover(bytes32, byte, bytes32, bytes32) returns (address): recover public key from elliptic curve signature - arguments are (data, v, r, s)
In the above, "tightly packed" means that the arguments are concatenated without padding, i.e.
sha3("ab", "c") == sha3("abc") == sha3(0x616263) == sha3(6382179) = sha3(97, 98, 99). If padding is needed, explicit type conversions can be used.
It might be that you run into Out-of-Gas for sha256, ripemd160 or ecrecover on a private blockchain. The reason for this is that those are implemented as so-called precompiled contracts and these contracts only really exist after they received the first message (although their contract code is hardcoded). Messages to non-existing contracts are more expensive and thus the execution runs into an Out-of-Gas error. A workaround for this problem is to first send e.g. 1 Wei to each of the contracts before you use them in your actual contracts. This is not an issue on the official or test net.
-
this(current contract's type): the current contract, explicitly convertible toaddress -
suicide(address): suicide the current contract, sending its funds to the given address
Furthermore, all functions of the current contract are callable directly including the current function.
Большинство управляющих структур из C/JavaScript доступны в Solidity, за исключением switch и goto. А именно, доступны: if, else, while, for, break, continue, return, с обычным синтаксисом, известным из C / JavaScript.
Условия необходимо писать в скобках, за исключением случаем с одним простым условием.
Обратите внимание, что преобразования типов из нелогических в логический не существует, как в C и JavaScript, таким образом выражение if (1) { ... } является некорректным в Solidity.
Functions of the current contract can be called directly ("internally"), also recursively, as seen in this nonsensical example:
contract c {
function g(uint a) returns (uint ret) { return f(); }
function f() returns (uint ret) { return g(7) + f(); }
}These function calls are translated into simple jumps inside the EVM. This has the effect that the current memory is not cleared, i.e. passing memory references to internally-called functions is very efficient. Only functions of the same contract can be called internally.
The expression this.g(8); is also a valid function call, but this time, the function
will be called "externally", via a message call and not directly via jumps.
Functions of other contracts have to be called externally. For an external call,
all function arguments have to be copied to memory.
When calling functions of other contracts, the amount of Wei sent with the call and the gas can be specified:
contract InfoFeed {
function info() returns (uint ret) { return 42; }
}
contract Consumer {
InfoFeed feed;
function setFeed(address addr) { feed = InfoFeed(addr); }
function callFeed() { feed.info.value(10).gas(800)(); }
}Note that the expression InfoFeed(addr) performs an explicit type conversion stating
that "we know that the type of the contract at the given address is InfoFeed" and
this does not execute a constructor. We could also have used function setFeed(InfoFeed _feed) { feed = _feed; } directly. Be careful about the fact that feed.info.value(10).gas(800)
only (locally) sets the value and amount of gas sent with the function call and only the
parentheses at the end perform the actual call.
Function call arguments can also be given by name, in any order, and the names of unused parameters (especially return parameters) can be omitted.
contract c {
function f(uint key, uint value) { ... }
function g() {
// named arguments
f({value: 2, key: 3});
}
// omitted parameters
function func(uint k, uint) returns(uint) {
return k;
}
}The evaluation order of expressions is not specified (more formally, the order in which the children of one node in the expression tree are evaluated is not specified, but they are of course evaluated before the node itself). It is only guaranteed that statements are executed in order and short-circuiting for boolean expressions is done.
The semantics of assignment are a bit more complicated for non-value types like arrays and structs.
Assigning to a state variable always creates an independent copy. On the other hand, assigning to a local variable creates an independent copy only for elementary types, i.e. static types that fit into 32 bytes. If structs or arrays (including bytes and string) are assigned from a state variable to a local variable, the local variable holds a reference to the original state variable. A second assignment to the local variable does not modify the state but only changes the reference. Assignments to members (or elements) of the local variable do change the state.
There are some cases where exceptions are thrown automatically (see below). You can use the throw instruction to throw an exception manually. The effect of an exception is that the currently executing call is stopped and reverted (i.e. all changes to the state and balances are undone) and the exception is also "bubbled up" through Solidity function calls (exceptions are send and the low-level functions call and callcode, those return false in case of an exception).
Catching exceptions is not yet possible.
In the following example, we show how throw can be used to easily revert an Ether transfer and also how to check the return value of send:
contract Sharer {
function sendHalf(address addr) returns (uint balance) {
if (!addr.send(msg.value/2))
throw; // also reverts the transfer to Sharer
return this.balance;
}
}
Currently, there are two situations, where exceptions happen automatically in Solidity:
- If you access an array beyond its length (i.e.
x[i]wherei >= x.length) - If a function called via a message call does not finish properly (i.e. it runs out of gas or throws an exception itself).
Internally, Solidity performs an "invalid jump" when an exception is thrown and thus causes the EVM to revert all changes made to the state. The reason for this is that there is no safe way to continue execution, because an expected effect did not occur. Because we want to retain the atomicity of transactions, the safest thing to do is to revert all changes and make the whole transaction (or at least call) without effect.
There are two ways to interface with other contracts: Either call a method of a contract whose address is known or create a new contract. Both uses are shown in the example below. Note that (obviously) the source code of a contract to be created needs to be known, which means that it has to come before the contract that creates it (and cyclic dependencies are not possible since the bytecode of the new contract is actually contained in the bytecode of the creating contract).
contract OwnedToken {
// TokenCreator is a contract type that is defined below. It is fine to reference it
// as long as it is not used to create a new contract.
TokenCreator creator;
address owner;
bytes32 name;
function OwnedToken(bytes32 _name) {
address nameReg = 0x72ba7d8e73fe8eb666ea66babc8116a41bfb10e2;
nameReg.call("register", _name); // This is an unsafe raw call to another contract.
owner = msg.sender;
// We do an explicit type conversion from `address` to `TokenCreator` and assume that the type of
// the calling contract is TokenCreator, there is no real way to check.
creator = TokenCreator(msg.sender);
name = _name;
}
function changeName(bytes32 newName) {
// Only the creator can alter the name -- contracts are implicitly convertible to addresses.
if (msg.sender == creator) name = newName;
}
function transfer(address newOwner) {
// Only the current owner can transfer the token.
if (msg.sender != owner) return;
// We also want to ask the creator if the transfer is fine.
// Note that this calls a function of the contract defined below.
// If the call fails (e.g. due to out-of-gas), the execution here stops
// immediately (the ability to catch this will be added later).
if (creator.isTokenTransferOK(owner, newOwner))
owner = newOwner;
}
}
contract TokenCreator {
function createToken(bytes32 name) returns (OwnedToken tokenAddress) {
// Create a new Token contract and return its address.
// From the JavaScript side, the return type is simply "address", as this is the closest
// type available in the ABI.
// To get the address, this can only be called by another contract (not eth_call).
return new OwnedToken(name);
}
function changeName(OwnedToken tokenAddress, bytes32 name) {
// Again, the external type of "tokenAddress" is simply "address".
tokenAddress.changeName(name);
}
function isTokenTransferOK(address currentOwner, address newOwner) returns (bool ok) {
// Check some arbitrary condition.
address tokenAddress = msg.sender;
return (sha3(newOwner) & 0xff) == (bytes20(tokenAddress) & 0xff);
}
}Libraries are similar to contracts, but their purpose is that they are deployed only once at a specific address and their code is reused using the CALLCODE feature of the EVM. This means that if library functions are called, their code is executed in the context of the calling contract, i.e. this points to the calling contract and especially the storage from the calling contract can be accessed (this is not yet possible from solidity).
The following example illustrates how to use libraries. Note that the library given below is not a good example for a library, since the benefits of a library in terms of saving gas for code deployment are only visible starting from a certain size.
library Math {
function max(uint a, uint b) returns (uint) {
if (a > b) return a;
else return b;
}
function min(uint a, uint b) returns (uint) {
if (a < b) return a;
else return b;
}
}
contract C {
function register(uint value) {
// The library functions can be called without a specific instance of the library,
// since the "instance" will be the current contract.
value = Math.max(10, Math.min(100, value)); // clamp value to [10, 100]
// ...
}
}
The calls to Math.max and Math.min are both compiled as calls (CALLCODEs) to an external contract. If you use libraries, take care that an actual external function call is performed, so msg.sender does not point to the original sender anymore but to the the calling contract and also msg.value contains the funds sent during the call to the library function.
As the compiler cannot know where the library will be deployed at, these addresses have to be filled into the final bytecode by a linker (see Using the Commandline Compiler on how to use the commandline compiler for linking). If the addresses are not given as arguments to the compiler, the compiled hex code will contain placeholders of the form __Math______ (where Math is the name of the library). The address can be filled manually by replacing all those 40 symbols by the hex encoding of the address of the library contract.
Restrictions for libraries in comparison to contracts:
- no state variables
- cannot inherit nor be inherited
(these might be lifted at a later point)
A Solidity contract expects constructor arguments after the end of the contract data itself. This means that you pass the arguments to a contract by putting them after the compiled bytes as returned by the compiler in the usual ABI format.
If you use web3.js's MyContract.new(), you do not have to care about this, though.
Solidity supports multiple inheritance by copying code including polymorphism. Details are given in the following example.
contract owned {
function owned() { owner = msg.sender; }
address owner;
}
// Use "is" to derive from another contract. Derived contracts can access all non-private members
// including internal functions and state variables. These cannot be accessed externally via
// `this`, though.
contract mortal is owned {
function kill() { if (msg.sender == owner) suicide(owner); }
}
// These are only provided to make the interface known to the compiler.
// Note the bodiless functions. If a contract does not implement all functions
// it can only be used as an interface.
contract Config { function lookup(uint id) returns (address adr); }
contract NameReg { function register(bytes32 name); function unregister(); }
// Multiple inheritance is possible. Note that "owned" is also a base class of
// "mortal", yet there is only a single instance of "owned" (as for virtual
// inheritance in C++).
contract named is owned, mortal {
function named(bytes32 name) {
address ConfigAddress = 0xd5f9d8d94886e70b06e474c3fb14fd43e2f23970;
NameReg(Config(ConfigAddress).lookup(1)).register(name);
}
// Functions can be overridden, both local and message-based function calls take
// these overrides into account.
function kill() {
if (msg.sender == owner) {
address ConfigAddress = 0xd5f9d8d94886e70b06e474c3fb14fd43e2f23970;
NameReg(Config(ConfigAddress).lookup(1)).unregister();
// It is still possible to call a specific overridden function.
mortal.kill();
}
}
}
// If a constructor takes an argument, it needs to be provided in the header (or modifier-invocation-style at the constructor of the derived contract (see below)).
contract PriceFeed is owned, mortal, named("GoldFeed") {
function updateInfo(uint newInfo) {
if (msg.sender == owner) info = newInfo;
}
function get() constant returns(uint r) { return info; }
uint info;
}Note that above, we call mortal.kill() to "forward" the destruction request. The way this is done
is problematic, as seen in the following example:
contract mortal is owned {
function kill() { if (msg.sender == owner) suicide(owner); }
}
contract Base1 is mortal {
function kill() { /* do cleanup 1 */ mortal.kill(); }
}
contract Base2 is mortal {
function kill() { /* do cleanup 2 */ mortal.kill(); }
}
contract Final is Base1, Base2 {
}A call to Final.kill() will call Base2.kill as the most derived override, but this
function will bypass Base1.kill, basically because it does not even know about Base1.
The way around this is to use super:
contract mortal is owned {
function kill() { if (msg.sender == owner) suicide(owner); }
}
contract Base1 is mortal {
function kill() { /* do cleanup 1 */ super.kill(); }
}
contract Base2 is mortal {
function kill() { /* do cleanup 2 */ super.kill(); }
}
contract Final is Base2, Base1 {
}If Base1 calls a function of super, it does not simply call this function on one of its
base contracts, it rather calls this function on the next base contract in the final
inheritance graph, so it will call Base2.kill() (note that the final inheritance sequence is
-- starting with the most derived contract: Final, Base1, Base2, mortal, owned). Note that the actual function that
is called when using super is not known in the context of the class where it is used,
although its type is known. This is similar for ordinary virtual method lookup.
Derived contracts need to provide all arguments needed for the base constructors. This can be done at two places:
contract Base {
uint x;
function Base(uint _x) { x = _x; }
}
contract Derived is Base(7) {
function Derived(uint _y) Base(_y * _y) {
}
}Either directly in the inheritance list (is Base(7)) or in the way a modifier would be invoked as part of the header of the derived constructor (Base(_y * _y)). The first way to do it is more convenient if the constructor argument is a constant and defines the behaviour of the contract or describes it. The second way has to be used if the constructor arguments of the base depend on those of the derived contract. If, as in this silly example, both places are used, the modifier-style argument takes precedence.
Languages that allow multiple inheritance have to deal with several problems, one of them being the Diamond Problem. Solidity follows the path of Python and uses "C3 Linearization" to force a specific order in the DAG of base classes. This results in the desirable property of monotonicity but disallows some inheritance graphs. Especially, the order in which the base classes are given in the is directive is important. In the following code, Solidity will give the error "Linearization of inheritance graph impossible".
contract X {}
contract A is X {}
contract C is A, X {}The reason for this is that C requests X to override A (by specifying A, X in this order), but A itself requests to override X, which is a contradiction that cannot be resolved.
A simple rule to remember is to specify the base classes in the order from "most base-like" to "most derived".
Contract functions can lack an implementation as in the following example (note that the function declaration header is terminated by ;).
contract feline {
function utterance() returns (bytes32);
}Such contracts cannot be compiled (even if they contain implemented functions alongside non-implemented functions), but they can be used as base contracts:
contract Cat is feline {
function utterance() returns (bytes32) { return "miaow"; }
}If a contract inherits from an abstract contract and does not implement all non-implemented functions by overriding, it will itself be abstract.
Functions and state variables can be specified as being public, internal or private, where the default for functions is public and internal for state variables. In addition, functions can also be specified as external.
external: External functions are part of the contract interface and they can be called from other contracts and via transactions. An external function f cannot be called internally (i.e. f() does not work, but this.f() works). Furthermore, all function parameters are immutable.
public: Public functions are part of the contract interface and can be either called internally or via messages. For public state variables, an automatic accessor function (see below) is generated.
internal: Those functions and state variables can only be accessed internally, i.e. from within the current contract or contracts deriving from it without using this.
private: Private functions and state variables are only visible for the contract they are defined in and not in derived contracts.
contract c {
function f(uint a) private returns (uint b) { return a + 1; }
function setData(uint a) internal { data = a; }
uint public data;
}Other contracts can call c.data() to retrieve the value of data in state storage, but are not able to call f. Contracts derived from c can call setData to alter the value of data (but only in their own state).
The compiler automatically creates accessor functions for all public state variables. The contract given below will have a function called data that does not take any arguments and returns a uint, the value of the state variable data. The initialization of state variables can be done at declaration.
contract test {
uint public data = 42;
}The next example is a bit more complex:
contract complex {
struct Data { uint a; bytes3 b; mapping(uint => uint) map; }
mapping(uint => mapping(bool => Data[])) public data;
}It will generate a function of the following form:
function data(uint arg1, bool arg2, uint arg3) returns (uint a, bytes3 b)
{
a = data[arg1][arg2][arg3].a;
b = data[arg1][arg2][arg3].b;
}Note that the mapping in the struct is omitted because there is no good way to provide the key for the mapping.
A contract can have exactly one unnamed function. This function cannot have arguments and is executed on a call to the contract if none of the other functions matches the given function identifier (or if no data was supplied at all).
contract Test {
function() { x = 1; }
uint x;
}
contract Caller {
function callTest(address testAddress) {
Test(testAddress).call(0xabcdef01); // hash does not exist
// results in Test(testAddress).x becoming == 1.
}
}Modifiers can be used to easily change the behaviour of functions, for example to automatically check a condition prior to executing the function. They are inheritable properties of contracts and may be overridden by derived contracts.
contract owned {
function owned() { owner = msg.sender; }
address owner;
// This contract only defines a modifier but does not use it - it will
// be used in derived contracts.
// The function body is inserted where the special symbol "_" in the
// definition of a modifier appears.
modifier onlyowner { if (msg.sender == owner) _ }
}
contract mortal is owned {
// This contract inherits the "onlyowner"-modifier from "owned" and
// applies it to the "kill"-function, which causes that calls to "kill"
// only have an effect if they are made by the stored owner.
function kill() onlyowner {
suicide(owner);
}
}
contract priced {
// Modifiers can receive arguments:
modifier costs(uint price) { if (msg.value >= price) _ }
}
contract Register is priced, owned {
mapping (address => bool) registeredAddresses;
uint price;
function Register(uint initialPrice) { price = initialPrice; }
function register() costs(price) {
registeredAddresses[msg.sender] = true;
}
function changePrice(uint _price) onlyowner {
price = _price;
}
}Multiple modifiers can be applied to a function by specifying them in a whitespace-separated list and will be evaluated in order. Explicit returns from a modifier or function body immediately leave the whole function, while control flow reaching the end of a function or modifier body continues after the "_" in the preceding modifier. Arbitrary expressions are allowed for modifier arguments and in this context, all symbols visible from the function are visible in the modifier. Symbols introduced in the modifier are not visible in the function (as they might change by overriding).
State variables of value type can be declared as constant.
contract C {
uint constant x = 32;
bytes3 constant text = "abc";
}This has the effect that the compiler does not reserve a storage slot for these variables and every occurrence is replaced by their constant value.
Events allow the convenient usage of the EVM logging facilities. Events are inheritable members of contracts. When they are called, they cause the arguments to be stored in the transaction's log. Up to three parameters can receive the attribute indexed which will cause the respective arguments to be treated as log topics instead of data. The hash of the signature of the event is one of the topics except if you declared the event with anonymous specifier. All non-indexed arguments will be stored in the data part of the log. Example:
contract ClientReceipt {
event Deposit(address indexed _from, bytes32 indexed _id, uint _value);
function deposit(bytes32 _id) {
Deposit(msg.sender, _id, msg.value);
}
}Here, the call to Deposit will behave identical to
log3(msg.value, 0x50cb9fe53daa9737b786ab3646f04d0150dc50ef4e75f59509d83667ad5adb20, sha3(msg.sender), _id);. Note that the large hex number is equal to the sha3-hash of "Deposit(address,bytes32,uint256)", the event's signature.
- Javascript documentation: https://github.com/ethereum/wiki/wiki/JavaScript-API#contract-events
- Example usage of events: https://github.com/debris/smart-exchange/blob/master/lib/contracts/SmartExchange.sol
- How to access them in js: https://github.com/debris/smart-exchange/blob/master/lib/exchange_transactions.js
Statically-sized variables (everything except mapping and dynamically-sized array types) are laid out contiguously in storage starting from position 0. Multiple items that need less than 32 bytes are packed into a single storage slot if possible, according to the following rules:
- The first item in a storage slot is stored lower-order aligned.
- Elementary types use only that many bytes that are necessary to store them.
- If an elementary type does not fit the remaining part of a storage slot, it is moved to the next storage slot.
- Structs and array data always start a new slot and occupy whole slots (but items inside a struct or array are packed tightly according to these rules).
The elements of structs and arrays are stored after each other, just as if they were given explicitly.
Due to their unpredictable size, mapping and dynamically-sized array types use a sha3
computation to find the starting position of the value or the array data. These starting positions are always full stack slots.
The mapping or the dynamic array itself
occupies an (unfilled) slot in storage at some position p according to the above rule (or by
recursively applying this rule for mappings to mappings or arrays of arrays). For a dynamic array, this slot stores the number of elements in the array (byte arrays and strings are an exception here, see below). For a mapping, the slot is unused (but it is needed so that two equal mappings after each other will use a different hash distribution).
Array data is located at sha3(p) and the value corresponding to a mapping key
k is located at sha3(k . p) where . is concatenation. If the value is again a
non-elementary type, the positions are found by adding an offset of sha3(k . p).
bytes and string store their data in the same slot where also the length is stored if they are short. In particular: If the data is at most 31 bytes long, it is stored in the higher-order bytes (left aligned) and the lowest-order byte stores length * 2. If it is longer, the main slot stores length * 2 + 1 and the data is stored as usual in sha3(slot).
So for the following contract snippet:
contract c {
struct S { uint a; uint b; }
uint x;
mapping(uint => mapping(uint => S)) data;
}The position of data[4][9].b is at sha3(uint256(9) . sha3(uint256(4) . uint(256(1))) + 1.
There are some types in Solidity's type system that have no counterpart in the syntax. One of these types are the types of functions. But still, using var it is possible to have local variables of these types:
contract FunctionSelector {
function select(bool useB, uint x) returns (uint z) {
var f = a;
if (useB) f = b;
return f(x);
}
function a(uint x) returns (uint z) {
return x * x;
}
function b(uint x) returns (uint z) {
return 2 * x;
}
}Calling select(false, x) will compute x * x and select(true, x) will compute 2 * x.
The Solidity optimizer operates on assembly, so it can be and also is used by other languages. It splits the sequence of instructions into basic blocks at JUMPs and JUMPDESTs. Inside these blocks, the instructions are analysed and every modification to the stack, to memory or storage is recorded as an expression which consists of an instruction and a list of arguments which are essentially pointers to other expressions. The main idea is now to find expressions that are always equal (on every input) and combine them into an expression class. The optimizer first tries to find each new expression in a list of already known expressions. If this does not work, the expression is simplified according to rules like constant + constant = sum_of_constants or X * 1 = X. Since this is done recursively, we can also apply the latter rule if the second factor is a more complex expression where we know that it will always evaluate to one. Modifications to storage and memory locations have to erase knowledge about storage and memory locations which are not known to be different: If we first write to location x and then to location y and both are input variables, the second could overwrite the first, so we actually do not know what is stored at x after we wrote to y. On the other hand, if a simplification of the expression x - y evaluates to a non-zero constant, we know that we can keep our knowledge about what is stored at x.
At the end of this process, we know which expressions have to be on the stack in the end and have a list of modifications to memory and storage. This information is stored together with the basic blocks and is used to link them. Furthermore, knowledge about the stack, storage and memory configuration is forwarded to the next block(s). If we know the targets of all JUMP and JUMPI instructions, we can build a complete control flow graph of the program. If there is only one target we do not know (this can happen as in principle, jump targets can be computed from inputs), we have to erase all knowledge about the input state of a block as it can be the target of the unknown JUMP. If a JUMPI is found whose condition evaluates to a constant, it is transformed to an unconditional jump.
As the last step, the code in each block is completely re-generated. A dependency graph is created from the expressions on the stack at the end of the block and every operation that is not part of this graph is essentially dropped. Now code is generated that applies the modifications to memory and storage in the order they were made in the original code (dropping modifications which were found not to be needed) and finally, generates all values that are required to be on the stack in the correct place.
These steps are applied to each basic block and the newly generated code is used as replacement if it is smaller. If a basic block is split at a JUMPI and during the analysis, the condition evaluates to a constant, the JUMPI is replaced depending on the value of the constant, and thus code like
var x = 7;
data[7] = 9;
if (data[x] != x + 2)
return 2;
else
return 1;is simplified to code which can also be compiled from
data[7] = 9;
return 1;even though the instructions contained a jump in the beginning.
One of the build targets of the Solidity repository is solc, the solidity commandline compiler.
Using solc --help provides you with an explanation of all options. The compiler can produce various outputs, ranging from simple binaries and assembly over an abstract syntax tree (parse tree) to estimations of gas usage.
If you only want to compile a single file, you run it as solc --bin sourceFile.sol and it will print the binary. Before you deploy your contract, activate the optimizer while compiling using solc --optimize --bin sourceFile.sol. If you want to get some of the more advanced output variants of solc, it is probably better to tell it to output everything to separate files using solc -o outputDirectory --bin --ast --asm sourceFile.sol.
Of course, you can also specify several source files and actually that is also required if you use the import statement in Solidity: The compiler will (for now) not automatically discover source files for you, so you have to provide it with all source files your project consists of.
If your contracts use libraries, you will notice that the bytecode contains substrings of the form __LibraryName______. You can use solc as a linker meaning that it will insert the library addresses for you at those points:
Either add --libraries "Math:0x12345678901234567890 Heap:0xabcdef0123456" to your command to provide an address for each library or store the string in a file (one library per line) and run solcusing--libraries fileName`.
If solc is called with the option --link, all input files are interpreted to be unlinked binaries (hex-encoded) in the __LibraryName____-format given above and are linked in-place (if the input is read from stdin, it is written to stdout). All options except --libraries are ignored (including -o) in this case.
- Используйте
deleteдля массивов, чтобы удалить все их элементы - Используйте короткие типы для элементов структуры и сортируйте их так, чтобы короткие типы были сгруппированы вместе. Это может уменьшить затраты газа, так как множественные SSTORE операции могут быть объединены в одну (SSTORE стоит 5000 или 20000 газа, вы точно захотите это оптимизировать). Используйте оценщик цены стоимости газа (с включенным оптимизатором) для проверки!
- Make your state variables public - the compiler will create getters for you for free.
- If you end up checking conditions on input or state a lot at the beginning of your functions, try using modifiers
- If your contract has a function called
sendbut you want to use the built-in send-function, useaddress(contractVariable).send(amount). - If you want your contracts to receive ether when called via
send, you have to implement the fallback function. - Initialise storage structs with a single assignment:
x = MyStruct({a: 1, b: 2});
Unfortunately, there are some subtleties the compiler does not yet warn you about.
- If you use
StructName xoruint[] xas a local variable, it has to be assigned from a state variable, otherwise it behaves like a "null pointer" to storage, so you cannot use it on its own. Please read about data locations. The most common solution is to useStructName memory xoruint[] memory x. - In
for (var i = 0; i < arrayName.length; i++) { ... }, the type ofiwill beuint8, because this is the smallest type that is required to hold the value0. If the array has more than 255 elements, the loop will not terminate.
-
block.coinbase(address): current block miner's address -
block.difficulty(uint): current block difficulty -
block.gaslimit(uint): current block gaslimit -
block.number(uint): current block number -
block.blockhash(function(uint) returns (bytes32)): hash of the given block -
block.timestamp(uint): current block timestamp -
msg.data(bytes): complete calldata -
msg.gas(uint): remaining gas -
msg.sender(address): sender of the message (current call) -
msg.value(uint): number of wei sent with the message -
now(uint): current block timestamp (alias forblock.timestamp) -
tx.gasprice(uint): gas price of the transaction -
tx.origin(address): sender of the transaction (full call chain) -
sha3(...) returns (bytes32): compute the Ethereum-SHA3 hash of the (tightly packed) arguments -
sha256(...) returns (bytes32): compute the SHA256 hash of the (tightly packed) arguments -
ripemd160(...) returns (bytes20): compute RIPEMD of 256 the (tightly packed) arguments -
ecrecover(bytes32, byte, bytes32, bytes32) returns (address): recover public key from elliptic curve signature -
this(current contract's type): the current contract, explicitly convertible toaddress -
super: the contract one level higher in the inheritance hierarchy -
suicide(address): suicide the current contract, sending its funds to the given address -
<address>.balance: balance of the address in Wei -
<address>.send(uint256) returns (bool): send given amount of Wei to address, returnsfalseon failure.
function myFunction() <visibility specifier> returns (bool) {
return true;
}-
public: visible externally and internally (creates accessor function for storage/state variables) -
private: only visible in the current contract -
external: only visible externally (only for functions) - i.e. can only be message-called (viathis.fun) -
internal: only visible internally
-
constantfor state variables: Disallows assignment (except initialisation), does not occupy storage slot. -
constantfor functions: Disallows modification of state - this is not enforced yet. -
anonymousfor events: Does not store event signature as topic. -
indexedfor event parameters: Stores the parameter as topic.
TODO
Большое спасибо General-Beck Денис Солдатову за перевод. Другие переводы от Дениса на тему Ethereum можно найти здесь
Дополнил полноценно перевод ALarik Артур Ларин
Note: This page is under construction
- Home
- Ethereum Whitepaper
- Ethereum Introduction
- Uses: DAOs and dapps
- Getting Ether
- FAQs
- Design Rationale
- EVM intro: Ethereum Yellow Paper, Beige Paper and Py-EVM.
- Wiki for (old) website (still a good introduction)
- Glossary
- Sharding introduction & R&D Compendium, FAQs & roadmap
- Casper Proof-of-Stake compendium and FAQs.
- Alternative blockchains, randomness, economics, and other research topics
- Hard Problems of Cryptocurrency
- Governance
- Chain Spec Format
- Inter-exchange Client Address Protocol
- URL Hint Protocol
- Network Status
- Mining
- Licensing
- Consortium Chain Development
- RLP Encoding
- Patricia Tree
- Web3 Secret Storage
- Light client protocol
- Subtleties
- Solidity Documentation
- NatSpec Format
- Contract ABI
- Bad Block Reporting
- Bad Chain Canary
0x927c0E368722206312D243417dA9797424b56434