Itasecoin Seeder

Copyright (c) 2009-2022 Bitcoin Developers
Copyright (c) 2011-2022 Litecoin Cash Developers
Copyright (c) 2011-2022 Sipa
Copyright (c) 2022 Milovan PMS

Itasecoin Seeder is a blockchain network crawler that maintains a list of IP addresses of the most reliable nodes on the Itasecoin network and shares those node IPs via DNS request to anyone requiring an entry point into the decentralized Itasecoin network.

Choose between two main usage modes which consist of locally running a lightweight DNS server or feeding the data into a Cloudflare account in order to respond to DNS seed requests. If you just want to crawl a network to get a list of the connectable nodes, without worrying about the DNS setup, you can do that too.

Tested to work with Ubuntu 18.04+ and Debian 8.x+ but it should work fine on any Linux installation, although package names and install steps may differ.

Features

• Regularly revisits known nodes to check their availability
• Cloudflare DNS integration
• Block explorer integration (including support for a 2nd failover explorer)
• Keep a running list of all nodes in the network or only show nodes that are above a certain version
• Bans/Unlists nodes after enough failures, or bad behaviour
• Keeps statistics over (exponential) windows of 2 hours, 8 hours, 1 day and 1 week, to base decisions on
• Very low memory (a few tens of megabytes) and cpu requirements
• Run multiple crawlers at the same time (96 threads simultaneously by default)
• Force connections to IPv4 or IPv6 only if desired
• Customizable options via configuration file

Full Setup Instructions

Detailed set up instructions can be found in the DNS Seeder Setup Guide

Quick Setup

Step 1 - Install Prerequisites

sudo apt-get install git build-essential libboost-all-dev libssl-dev libcurl4-openssl-dev libconfig++-dev

Step 2 - Download Source Code

git clone https://github.com/milopms/itasecoinseeder.git

Step 3 - Navigate to Source Directory

cd itasecoinseeder

Step 4 - Configure Seeder Settings

nano settings.conf

Make required changes in settings.conf

Step 5 - Build from Source

make

This will produce the dnsseed binary

Usage

Local DNS Server Mode

The seeder app comes with a built-in DNS server which listens for DNS requests and serves results based on the IP addresses that have been crawled on the Itasecoin blockchain network. If, for example, you want to run a DNS seed on dnsseed.example.com, you will need an authorative NS record in example.com's domain record that points back to your server. It is required to create both an NS and an "A" record to tie everything together.

Example:

Record Type	Name/Host	Value/Nameserver
A	vps	123.231.123.231
NS	dnsseed	vps.example.com

---

❗ SPECIAL INSTRUCTIONS FOR UBUNTU USERS ❗

All Ubuntu releases starting with 16.10 (first released in October 2016) come installed with systemd-resolved, which effectively prevents the seeder's built-in DNS server from working correctly. This is due to both applications requiring use of port 53, and systemd-resolved takes priority by default. There are a few ways to resolve this issue:

1. ✅ Force the seeder to bind to a specific IP address by adding the following argument to the terminal cmd: -a <ip address>. This is the recommended solution as it doesn't require disabling of any operating system services.

Example:

sudo ./dnsseed -h dnsseed.example.com -n vps.example.com -a 123.231.123.231

2. ⚠️ Disable binding of systemd-resolved to port 53 by editing the /etc/systemd/resolved.conf file and adding this line to the bottom of the file:

DNSStubListener=no

Save and reboot, and now systemd-resolved will no longer interfere with the seeder's DNS server.

NOTE: This method is only supported by systemd 232 and newer. You can check your version of systemd with the cmd: systemctl --version

3. ⚠️ Completely disable the systemd-resolved service with the following cmds (not recommended as it may cause undesired side-effects if you use the same server for anything other than running the seeder app):

sudo systemctl disable systemd-resolved
sudo systemctl stop systemd-resolved

---

You can now run the seeder app on the vps.example.com system using the following terminal cmd (must be run with root permissions or the DNS server will not be able to listen for and respond to requests properly):

sudo ./dnsseed -h dnsseed.example.com -n vps.example.com

If you want the DNS server to report SOA records, you must provide an email address using the -m argument:

./dnsseed -h dnsseed.example.com -n vps.example.com -m email@example.com

Non-Root Workarounds

Because non-root users cannot access ports below 1024, an extra step is required to allow you to run the DNS server (which must always use port 53) without root privileges. There are two known options for running the seeder app using a non-root user account:

1. The first non-root method is to use the setcap command to change the capabilities of the dnsseed binary file to specifically allow the app to bind to a port less than 1024 (this one-time cmd requires root privileges):

sudo setcap 'cap_net_bind_service=+ep' /path/to/dnsseed

Once the setcap command is complete, you can start the seeder app as per normal, without the need for sudo:

./dnsseed -h dnsseed.example.com -n vps.example.com -m email@example.com

2. The second non-root method is to add a redirect entry for port 53 in the iptables firewall system before running the seeder app as a non-root user (this one-time cmd requires root privileges):

sudo iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to-port 15353

After adding the new iptables rule, the seeder app can be called without sudo, but you must always specify the redirected port using the -p argument:

./dnsseed -h dnsseed.example.com -n vps.example.com -m email@example.com -p 15353

Cloudflare API Mode

Instead of using the DNS seeder app to run your own DNS server, you can alternatively utilize a free Cloudflare account to host the list of good nodes from your blockchain network. Extra setup is required before Cloudflare mode will work properly. Python 3+ and the Cloudflare Python API must be installed. Run the following cmds in the terminal, one line at a time:

sudo apt-get install python3 python3-pip
sudo pip3 install cloudflare

You must also fill in the Cloudflare API config section at the bottom of the settings.conf file.

Example:

cf_domain="example.com"
cf_domain_prefix="dnsseed"
cf_username="your_cloudflare_username"
cf_api_key="your_cloudflare_api_key"
cf_seed_dump="dnsseed.dump"

Run the seeder without the need to specify any additional options:

./dnsseed

Let the seeder app run for a few minutes until a dnsseed.dump file is generated, and then you can test Cloudflare mode:

cd /path/to/seeder/cf-uploader && python3 seeder.py

Assuming no errors were reported, you can check that your seeder domain is working properly by running the following cmd in the format nslookup {cf_domain_prefix}.{cf_domain}:

nslookup dnsseed.example.com

If everything is working correctly, you will see a number of "Name:" and "Address:" lines near the end of the output:

Example:

Server:         2001:19f1:300:1702::3
Address:        2001:19f1:300:1702::3#53

Non-authoritative answer:
Name:   dnsseed.example.com
Address: 158.203.13.138
Name:   dnsseed.example.com
Address: 44.76.38.113
Name:   dnsseed.example.com
Address: 46.76.253.117
Name:   dnsseed.example.com
Address: 145.248.52.149
Name:   dnsseed.example.com
Address: 82.240.23.104
Name:   dnsseed.example.com
Address: 103.207.140.36
Name:   dnsseed.example.com
Address: 204.222.30.68

Once configured correctly, it is recommended to set up a cron job that will automatically update the seeds list every 30 minutes or so:

*/30 * * * * cd /path/to/seeder/cf-uploader && python3 seeder.py

Command-Line Options

• -h or --host

  Hostname of the DNS seed

  Usage Example: ./dnsseed -h dnsseed.example.com

• -n or --ns

  Hostname of the nameserver

  Usage Example: ./dnsseed -n vps.example.com

• -m or --mbox

  E-Mail address reported in SOA records

  Usage Example: ./dnsseed -m email@example.com

• -t or --threads

  Number of crawlers to run in parallel (default 96)

  Usage Example: ./dnsseed -t 150

• -d or --dnsthreads

  Number of DNS server threads (default 4)

  Usage Example: ./dnsseed -d 10

• -a or --address

  Address to listen on (default ::)

  Usage Example: ./dnsseed -a 24.45.22.148

• -p or --port

  UDP port to listen on (default 53)

  Usage Example: ./dnsseed -p 15353

• -o or --onion

  Tor proxy IP/Port

  Usage Example: ./dnsseed -o 127.0.0.1:9150

• -i or --proxyipv4

  IPV4 SOCKS5 proxy IP/Port

  Usage Example: ./dnsseed -i 46.5.252.55:1080

• -k or --proxyipv6

  IPV6 SOCKS5 proxy IP/Port

  Usage Example: ./dnsseed -k [2620:0:6b0:a:250:56ff:fe99:78f7]:1234

• -w or --filter

  Allow these flag combinations as filters

  Usage Example: ./dnsseed -w 0x1,0x5,0x9,0xd,0x49,0x400

• -f or --forceip

  Force connections to nodes of a specific IP type
  valid options: a = all, 4 = IPv4, 6 = IPv6 (default a)

  Usage Example: ./dnsseed -f 4

• --wipeban

  Wipe list of banned nodes

  Usage Example: ./dnsseed --wipeban

• --wipeignore

  Wipe list of ignored nodes

  Usage Example: ./dnsseed --wipeignore

• --dumpall

  Dump all unique nodes

  Usage Example: ./dnsseed --dumpall

• -? or --help

  Show the help text

  Usage Example: ./dnsseed -?

---

Need more help? Read the DNS Seeder Setup Guide

Contributing

If you find a bug or experience issues with this software, please report it using the issue system.

Please see the contribution guide to see how you can participate in the development of Itasecoin Seeder. There are often topics seeking help where your contributions will have high impact and get very appreciation.

Communities

You can join the communities on different social media. To see what's going on, meet people & discuss, find the lastest meme, learn about Itasecoin, give or ask for help, to share your project.

Here are some places to visit:

• Discord
• Itasecoin Twitter

Frequently Asked Questions

Do you have a question about Itasecoin Seeder? Your answer may be in the FAQ or the Q&A section of the discussion board!

License

Itasecoin Seeder is released under the terms of the MIT license. See COPYING for more information or see opensource.org