diff --git a/src/usr/isteps/istep06/call_host_voltage_config.C b/src/usr/isteps/istep06/call_host_voltage_config.C
index 2d71280ab03..467fb1bf818 100644
--- a/src/usr/isteps/istep06/call_host_voltage_config.C
+++ b/src/usr/isteps/istep06/call_host_voltage_config.C
@@ -289,6 +289,14 @@ void* call_host_voltage_config( void *io_pArgs )
                     l_turboFreq = l_ceilingFreq;
                 }
 
+                TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
+                          "Proc %.8X Freq from #V: "
+                          "Powersave = %d Turbo = %d, UltraTurbo = %d",
+                          TARGETING::get_huid(l_proc),
+                          l_voltageData.PSFreq,
+                          l_voltageData.turboFreq,
+                          l_voltageData.uTurboFreq );
+
             } // EQ for-loop
 
             // Don't set the boot voltage ATTR -- instead the
@@ -323,6 +331,18 @@ void* call_host_voltage_config( void *io_pArgs )
         // set the frequency system targets
         l_sys->setAttr<ATTR_NOMINAL_FREQ_MHZ>( l_nominalFreq );
 
+        // raise the min freq if there is a system policy for it
+        uint32_t l_dpoPercent = l_sys->getAttr<ATTR_DPO_MIN_FREQ_PERCENT>();
+        uint32_t l_dpoFreq = l_nominalFreq;
+        if( (l_dpoPercent != 0) && (l_dpoPercent < 100) )
+        {
+            l_dpoFreq = (l_nominalFreq*l_dpoPercent)/100;
+            TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
+                      "Computed floor=%d, DPO=%d (percent=-%d)",
+                      l_floorFreq, l_dpoFreq, l_dpoPercent );
+            l_floorFreq = std::max( l_floorFreq, l_dpoFreq );
+        }
+
         l_sys->setAttr<ATTR_MIN_FREQ_MHZ>( l_floorFreq );
 
         l_sys->setAttr<ATTR_FREQ_CORE_CEILING_MHZ>( l_ceilingFreq );
diff --git a/src/usr/targeting/common/xmltohb/attribute_types.xml b/src/usr/targeting/common/xmltohb/attribute_types.xml
index 8317ff05c8c..48499b8edcf 100644
--- a/src/usr/targeting/common/xmltohb/attribute_types.xml
+++ b/src/usr/targeting/common/xmltohb/attribute_types.xml
@@ -2554,7 +2554,6 @@
     </description>
     <simpleType>
         <uint32_t>
-<!--TODO RTC:151649 Remove default value when data is pulled from MVPD #V -->
             <default>4800</default>
         </uint32_t>
     </simpleType>
@@ -2567,6 +2566,27 @@
     </hwpfToHbAttrMap>
 </attribute>
 
+<attribute>
+    <id>DPO_MIN_FREQ_PERCENT</id>
+    <description>
+        Defines a negative percentage value that is applied to
+        the ATTR_NOMINAL_FREQ_MHZ determined from MVPD #V.  It
+        is used to explicitly raise the value of MIN_FREQ_MHZ above
+        what is specified by MVPD #V data.  On FSP systems this
+        is sourced from the power_management def file.
+        Value must be between 0 and 100.
+        A value of zero indicates no override.
+    </description>
+    <simpleType>
+        <uint32_t>
+            <default>0</default>
+        </uint32_t>
+    </simpleType>
+    <persistency>non-volatile</persistency>
+    <readable/>
+    <writeable/>
+</attribute>
+
 <attribute>
     <id>FREQ_PB_MHZ</id>
     <description>
@@ -3714,8 +3734,6 @@
     </description>
     <simpleType>
         <uint32_t>
-<!--TODO RTC:151649 Remove default value when data is pulled from MVPD #V -->
-            <default>4800</default>
         </uint32_t>
     </simpleType>
     <persistency>volatile</persistency>
@@ -21297,8 +21315,6 @@ Measured in GB</description>
   </description>
   <simpleType>
     <uint32_t>
-<!--TODO RTC:151649 Remove default value when data is pulled from MVPD #V -->
-        <default>4800</default>
     </uint32_t>
   </simpleType>
   <persistency>volatile</persistency>
diff --git a/src/usr/targeting/common/xmltohb/simics_NIMBUS.system.xml b/src/usr/targeting/common/xmltohb/simics_NIMBUS.system.xml
index e2dac7acdeb..44d8ffaea88 100644
--- a/src/usr/targeting/common/xmltohb/simics_NIMBUS.system.xml
+++ b/src/usr/targeting/common/xmltohb/simics_NIMBUS.system.xml
@@ -97,6 +97,10 @@
         <id>ASYNC_NEST_FREQ_MHZ</id>
         <default>0x7D0</default>
     </attribute>
+    <attribute>
+        <id>DPO_MIN_FREQ_PERCENT</id>
+        <default>98</default>
+    </attribute>
     <attribute>
         <id>REQUIRED_SYNCH_MODE</id>
         <default>2</default><!-- NEVER -->
diff --git a/src/usr/targeting/common/xmltohb/target_types.xml b/src/usr/targeting/common/xmltohb/target_types.xml
index 9e0d60185db..526a1444b7f 100755
--- a/src/usr/targeting/common/xmltohb/target_types.xml
+++ b/src/usr/targeting/common/xmltohb/target_types.xml
@@ -607,6 +607,7 @@
     <attribute><id>PROC_REFCLOCK_RCVR_TERM</id></attribute>
     <attribute><id>PCI_REFCLOCK_RCVR_TERM</id></attribute>
     <attribute><id>MIN_FREQ_MHZ</id></attribute>
+    <attribute><id>DPO_MIN_FREQ_PERCENT</id></attribute>
     <attribute><id>FREQ_PROC_REFCLOCK</id></attribute>
     <attribute><id>FREQ_PROC_REFCLOCK_KHZ</id></attribute>
     <attribute><id>FREQ_MEM_REFCLOCK</id></attribute>