diff --git a/docs/assets/images/schematics/PT100-Schematic.jpg b/docs/assets/images/schematics/PT100-Schematic.jpg
new file mode 100644
index 0000000..a6b8504
Binary files /dev/null and b/docs/assets/images/schematics/PT100-Schematic.jpg differ
diff --git a/docs/tutorials/extras/pt100.md b/docs/tutorials/extras/pt100.md
new file mode 100644
index 0000000..75a2d31
--- /dev/null
+++ b/docs/tutorials/extras/pt100.md
@@ -0,0 +1,9 @@
+### PT100 RTD Thermal Sensor Integration
+
+The EasyPiezi (Rev 1.1.x and Rev 2.x.x) utilize an extra amp channel to allow the use of a PT100 RTD Thermal sensor with minimal additional components. The circuit is based on E3D's daughterboard designed for PT100 sensors.
+
+![](../../assets/schematics/PT100-Schematic.jpg)
+
+The circuit outputs a DC voltage that corresponds to the RTD's change in resistance, which in turn changes based on the temperature of the RTD. This output shares a common ground with other parts of the circuit, so only one additonal output pin is required to utilize it.
+
+As this is a direct voltage reading, the usual TH# inputs on most controllers cannot be used (unless the user removes the pullup resistor attached to the input). Instead, the PT100 input must be attached to a bare analog input pin (any of the pins labeled A##, like A5 on Atmega controllers)
\ No newline at end of file