Skip to content

MomsFriendlyRobotCompany/pycreate2

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

image

pyCreate2

Actions Status GitHub PyPI - Python Version PyPI PyPI - Downloads

A python library for controlling the iRobot Create 2. This was used in ECE 387 Introduction to Robotics class I taught at the US Air Force Academy.

  • video: robot could only follow the black tap road and couldn't run into anything. If anything got in the way, it had to naviage around it to its final destination
  • video: robot pet, follow the pink ball
  • video: robot pet, follow the pink ball

Install

pip

The recommended way to install this library is:

pip install pycreate2

Development

If you wish to develop and submit git-pulls, you can do:

git clone https://github.com/walchko/pycreate2
cd pycreate2
poetry install
poetry run pytest -v

Use

There are multiple ways to command the Create to move, here are some examples:

from  pycreate2 import Create2
import time

# Create a Create2.
port = "/dev/serial"  # where is your serial port?
bot = Create2(port)

# Start the Create 2
bot.start()

# Put the Create2 into 'safe' mode so we can drive it
# This will still provide some protection
bot.safe()

# You are responsible for handling issues, no protection/safety in
# this mode ... becareful
bot.full()

# directly set the motor speeds ... move forward
bot.drive_direct(100, 100)
time.sleep(2)

# turn in place
bot.drive_direct(200,-200)  # inputs for motors are +/- 500 max
time.sleep(2)

# Stop the bot
bot.drive_stop()

# query some sensors
sensors = bot.get_sensors()  # returns all data
print(sensors.light_bumper_left)

# Close the connection
# bot.close()

More examples are found in the examples folder.

Documents

Additional notes and documents are in the docs folder.

Modes

image

The different modes (OFF, PASSIVE, SAFE, and FULL) can be switched between by calling different commands.

  • OFF: The robot is off and can charge, it will accept no commands
  • PASSIVE: The robot is in standbye and can charge. It will send sensor packets, but will not move
  • SAFE: The robot will not charge, but you full control over it with a few exceptions. If the cliff sensors or wheel drop sensors are triggered, the robot goes back to PASSIVE mode.
  • FULL: The robot will not charge and you have full control. You are responsible to handle any response due to cliff, wheel drop or any other sensors.

Sensor Data

Sensor data is returned as a namedtuple from collections. The information can be accessed as either:

sensors = bot.get_sensors()
sensors.wall == sensors[1]  # True
Sensor Range Index
bumps_wheeldrops [0-15] 0
wall [0-1] 1
cliff_left [0-1] 2
cliff_front_left [0-1] 3
cliff_front_right [0-1] 4
cliff_right [0-1] 5
virtual_wall [0-1] 6
overcurrents [0-29] 7
dirt_detect [0-255] 8
ir_opcode [0-255] 9
buttons [0-255] 10
distance [-322768-32767] 11
angle [-322768-32767] 12
charger_state [0-6] 13
voltage [0-65535] 14
current [-322768-32767] 15
temperature [-128-127] 16
battery_charge [0-65535] 17
battery_capacity [0-65535] 18
wall_signal [0-1023] 19
cliff_left_signal [0-4095] 20
cliff_front_left_signal [0-4095] 21
cliff_front_right_signal [0-4095] 22
cliff_right_signal [0-4095] 23
charger_available [0-3] 24
open_interface_mode [0-3] 25
song_number [0-4] 26
song_playing [0-1] 27
oi_stream_num_packets [0-108] 28
velocity [-500-500] 29
radius [-322768-32767] 30
velocity_right [-500-500] 31
velocity_left [-500-500] 32
encoder_counts_left [-322768-32767] 33
encoder_counts_right [-322768-32767] 34
light_bumper [0-127] 35
light_bumper_left [0-4095] 36
light_bumper_front_left [0-4095] 37
light_bumper_center_left [0-4095] 38
light_bumper_center_right [0-4095] 39
light_bumper_front_right [0-4095] 40
light_bumper_right [0-4095] 41
ir_opcode_left [0-255] 42
ir_opcode_right [0-255] 43
left_motor_current [-322768-32767] 44
right_motor_current [-322768-32767] 45
main_brush_current [-322768-32767] 46
side_brush_current [-322768-32767] 47
statis [0-3] 48

Change Log

2021-02-22 0.8.1 Cleaned up code
2020-02-16 0.8.0 Simplified interface and bug fixes
2020-02-16 0.7.7 Fixed typo with poetry
2020-02-16 0.7.6 Fixed typo erro in bin
2020-02-16 0.7.5 Switched to toml and poetry
2019-06-30 0.7.4 Midi sounds working
2017-08-26 0.7.3 code clean up and doc updates
2017-08-26 0.7.2 updates and fixes
2017-05-26 0.5.0 init and published to pypi

The MIT License

Copyright (c) 2007 Damon Kohler

Copyright (c) 2015 Jonathan Le Roux (Modifications for Create 2)

Copyright (c) 2015 Brandon Pomeroy

Copyright (c) 2017 Kevin Walchko

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.