OpenVPN Client for Docker

What is this and what does it do?

This is a containerized OpenVPN client. It has a kill switch built with nftables that kills Internet connectivity to the container if the VPN tunnel goes down for any reason. This allows hosts and non-containerized applications to use the VPN without having to run VPN clients on those hosts.

This image requires you to supply the necessary OpenVPN configuration file(s). Because of this, any VPN provider should work.

Contributions will not automatically be accepted for this fork. This fork is based on v3.1.0 of upstream.

Why?

Having a containerized VPN client lets you use container networking to easily choose which applications you want using the VPN instead of having to set up split tunnelling. It also keeps you from having to install an OpenVPN client on the underlying host.

How do I use it?

Getting the image

You can either pull it from GitHub Container Registry or build it yourself.

To pull it from GitHub Container Registry, run

docker pull ghcr.io/RosemanLabs/openvpn-client

To build it yourself, run

docker build -t ghcr.io/RosemanLabs/openvpn-client https://github.com/RosemanLabs/docker-openvpn-client.git

Creating and running a container

The image requires the container be created with the NET_ADMIN capability and /dev/net/tun accessible. Below are bare-bones examples for docker run and Compose; however, you'll probably want to do more than just run the VPN client. See the sections below to learn how to have other containers use openvpn-client's network stack.

`docker run`

docker run --detach \
  --name=openvpn-client \
  --cap-add=NET_ADMIN \
  --device=/dev/net/tun \
  --volume <path/to/config/dir>:/data/vpn \
  ghcr.io/RosemanLabs/openvpn-client

`docker-compose`

services:
  openvpn-client:
    image: ghcr.io/RosemanLabs/openvpn-client
    container_name: openvpn-client
    cap_add:
      - NET_ADMIN
    devices:
      - /dev/net/tun
    volumes:
      - <path/to/config/dir>:/data/vpn
    restart: unless-stopped

Environment variables

Variable	Default (blank is unset)	Description
`USE_VPN_DNS`	`on`	Whether or not to use the DNS servers pushed from the VPN server. It's best to leave this enabled unless you have a good reason to disable it.
`VPN_CONFIG_FILE`		The OpenVPN configuration file to use. If unset, the `VPN_CONFIG_PATTERN` is used.
`VPN_CONFIG_PATTERN`		The search pattern to use when looking for an OpenVPN configuration file. If unset, the search will include `.conf` and `.ovpn`.
`VPN_AUTH_SECRET`		Docker secret that contain the credentials for accessing the VPN.
`VPN_LOG_LEVEL`	`3`	OpenVPN logging verbosity (`1`-`11`)
`SUBNETS`		A list of one or more comma-separated subnets (e.g. `192.168.0.0/24,192.168.1.0/24`) to allow outside of the VPN tunnel.
`KILL_SWITCH`	`iptables`	Which packet filterer to use for the kill switch. This value likely depends on your underlying host. Recommended to leave default unless you have problems. Acceptable values are `iptables` and `nftables`. To disable the kill switch, set to any other value.

`VPN_AUTH_SECRET`

Compose has support for Docker secrets. See the Compose file in this repository for example usage of passing proxy credentials as Docker secrets.

Using with other containers

Once you have your openvpn-client container up and running, you can tell other containers to use openvpn-client's network stack which gives them the ability to utilize the VPN tunnel. There are a few ways to accomplish this depending how how your container is created.

If your container is being created with

the same Compose YAML file as openvpn-client, add network_mode: service:openvpn-client to the container's service definition.
a different Compose YAML file than openvpn-client, add network_mode: container:openvpn-client to the container's service definition.
docker run, add --network=container:openvpn-client as an option to docker run.

Once running and provided your container has wget or curl, you can run docker exec <container_name> wget -qO - ifconfig.me or docker exec <container_name> curl -s ifconfig.me to get the public IP of the container and make sure everything is working as expected. This IP should match the one of openvpn-client.

Handling ports intended for connected containers

If you have a connected container and you need to access a port that container, you'll want to publish that port on the openvpn-client container instead of the connected container. To do that, add -p <host_port>:<container_port> if you're using docker run, or add the below snippet to the openvpn-client service definition in your Compose file if using docker-compose.

ports:
  - <host_port>:<container_port>

In both cases, replace <host_port> and <container_port> with the port used by your connected container.

Verifying functionality

Once you have container running ghcr.io/RosemanLabs/openvpn-client, run the following command to spin up a temporary container using openvpn-client for networking. The wget -qO - ifconfig.me bit will return the public IP of the container (and anything else using openvpn-client for networking). You should see an IP address owned by your VPN provider.

docker run --rm -it --network=container:openvpn-client alpine wget -qO - ifconfig.me

Troubleshooting

`can't initialize iptables`

If you see a message like the below in your logs, try setting KILL_SWITCH to nftables:

iptables v1.8.8 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

VPN authentication

Your OpenVPN configuration file may not come with authentication baked in. To provide OpenVPN the necessary credentials, create a file (any name will work, but this example will use credentials.txt) next to the OpenVPN configuration file with your username on the first line and your password on the second line.

For example:

vpn_username
vpn_password

In the OpenVPN configuration file, add the following line:

auth-user-pass credentials.txt

This will tell OpenVPN to read credentials.txt whenever it needs credentials.

License

RosemanLabs/docker-openvpn-client

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Languages

Error
Looks like something went wrong!

Packages