midi-commander-custom

Custom Firmware for the MeloAudio Midi Commander

There's no intention of this replacing the default firmware functions. I'm creating this purely for custom requirements that the original firmware will never fulfill.

This project provides the following components that work together:

A custom firmware to be loaded onto the Midi Commander (e.g. using DFU tool)
A publicly available configuration template spreadsheet on Google Sheets that you can customize to your needs
The python/CSV_to_Flash.py tool that can load a configuration spreadsheet to the Midi Commander through a simple USB connection

Build status

There is the current build under DFU\DFU_OUT\generated_xxx.dfu. See the instructions in the development environment section for building the firmware locally and/or loading it to the device.

Anything I leave in there has had a bit of testing on my device, and everything appears to be working ok. These are still Dev builds, so it's likely they'll have bugs. But it's something you can play with, and you should be able to go back to an meloaudio build.

Uploading the DFU binary is the same as for the meloaudio firmware. So download the firmware update tools from the meloaudio website (or directly from ST - package STSW-STM32080) and follow the upgrade manual.

I have had a lot of issues under Windows 10, and there are reports from others on the net to this effect. So I'm using a Windows 7 Virtual Machine to test the DFU aspects, which works fine.

Improvements in this commit

24 Apr 22 - The display driver has been modified to use DMA for all transfers, and interrupts to kick off the transfer of each line. The result is the processor isn't stalled waiting for the display to update. This will allow the display to be utilised more on individual key presses without resulting in delays. From an end user perspective, there should be no visable change.

Current features list

Completely open source, so feel free to contribute (even just bug reports! or better still user guides)
"Spreadsheet" based configuration, no scrolling through menus on that tiny screen with huge buttons. Easy Copy/Paste, Fill, etc. Easy sharing.
Supports Program Change (aka Patch Change), Controller Change, Note, Pitch Bend and Start/Stop messages for any of the buttons.
The Channel for each message is configured on each individual command. So it can address seperate pieces of hardware in a midi chain.
8 banks of 8 buttons. Each bank can display message strings for identification.
0 to 10 independant chained commands on each switch/bank position. Enables configuring different devices, or a series of actions of each button push.
CC, Note and Pitch Bend support momentary, toggle, or an on-duration of up to 2.5 sec in 10ms increments. CC can also send just the start message.
Program Change messages can include the Bank Select messages prior to the PC message, either just the Lease Signficant Byte or both the LSB & MSB.
Pass through of Sync/Start/Stop messages from USB to the Serial MIDI connector.
Firmware can be loaded through the normal DFU update process.
Configuration has been moved to the FLASH memory, so this will not affect the standard Melo firmware configuration that is stored in an external EEPROM.

Still to come

Expression Pedal inputs
The battery management has not been considered yet. Not sure if it even works on batteries with this.
Plenty of code tidying to be done
Plenty of testing needed
Needs documentation.

Configuration

The configuration is done via a spreadsheet. Here is a publicly available template on Google Sheets that you can copy and customize to your needs:

https://docs.google.com/spreadsheets/d/1KwKj3sYrNEkEl8ONipW-ZGSLD7r_W1NfWwyGgjnbk08/edit?usp=sharing

(a copy of this spreasheet is also availble in the repository at python/MeloConfig_10_Cmds - RC-600.csv)

Roughly, the spreadsheet allows you to specify for each button press up to 10 independant MIDI commands. For each command the following characteristics can be chosen independently:

Type: PC/CC/Note/PB (Pitch Bend)/Start/Stop
Midi Channel
PC/CC/Note number
CC/PB button on value
CC/PB button off value
PC bank select value
PC bank select value high byte
CC/PB/Note toggle mode
- If disabled, the button on value is sent when the button is held down, and the button off value is sent when the button is released. So each button press results in 2 commands sent.
- If enabled, the button on value is sent at the first button press, and the button off value is sent at the next button press and so on. So each button press results in 1 command sent. The LED of the button is toggled on and off at each button press.
Note velocity
Note/PB duration (up to 2.5 seconds in 10ms increments)

Lines starting with # or * are simply ignored which allows you to include comments in the configuration file to keep track of your work.

Once you are happy with your configuration, download it from Google Sheets as a CSV file (or use "Save As" if you chose to edit it locally with Excel or similar spreadsheet software).

Then prepare a Python environment as follows:

Download and install Python.
Check out this repository with Git or download it as a Zip and extract it somewhere.
Open a Terminal (or Windows Command Prompt) and run the following:
```
cd /path/to/midi-commander-custom
python3 -m pip install -r python/requirements.txt
python3 python/CSV_to_Flash.py -h
```
If your setup is successful, the last command should display the help message of the tool.

Once your Python environment is operational, you can load your configuration onto the Midi Commander as follows:

Turn on the Midi Commander in normal mode (not DFU)
Connect it to the USB port of your computer

Run the following in a Terminal or in the Windows Command Prompt:

cd /path/to/midi-commander-custom
python3 python/CSV_to_Flash.py /path/to/you/configuration-file.csv

The tool will convert the CSV file to a binary format and transmit it to the Midi Commander. At the end of the operation the Midi Commander should restart to load the new configuration.

Basic instructions for setting up development environment

Other than the simple python scripts, it's all just STM32CubeIDE. Install that, import the project from the MIDI_Commander_Custom directory into your workspace (it's just shrink wrapped Eclipse) and you're done.

There are two Build target, one called DFU Release for the DFU (with offset linker script and vector table) and the other called Debug for use with a ST-Link debugger. To build a DFU file for upload you'll need to build the binary in the IDE, then use the DFU packing tool that comes with the DFU uploader (can't remember their exact names off the top of my head.) Using the Intel HEX format file instead of the .bin saves you having to input the flash offset.

Loading the firmware

macOS

On macOS the firmware can be loaded with dfu-util which can be installed using Homebrew with a simple brew install dfu-util.

Then you connect the Midi Commander to the USB port of the computer and start it in DFU mode by holding down the bank down and D buttons (the two buttons on the bottom-right corner) while pressing the power button. The device should start with nothing on the display, and the LED 3 turned on.

dfu-util should now be able to detect the device:

$ dfu-util --list
...
Found DFU: [0483:df11] ver=0200, devnum=12, cfg=1, intf=0, path="4-1", alt=2, name="@NOR Flash : M29W128F/0x64000000/0256*64Kg", serial="5CE867623433"
Found DFU: [0483:df11] ver=0200, devnum=12, cfg=1, intf=0, path="4-1", alt=1, name="@SPI Flash : M25P64/0x00000000/128*64Kg", serial="5CE867623433"
Found DFU: [0483:df11] ver=0200, devnum=12, cfg=1, intf=0, path="4-1", alt=0, name="@Internal Flash  /0x08000000/06*002Ka,250*002Kg", serial="5CE867623433"

If you have a DFU file (e.g. from DFU/DFU_OUT/generated-*.dfu), you can load it as follows. --alt 0 should be used because it corresponds to the address range of the internal flash 0x80000000 in the list above.

dfu-util --alt 0 --download ./DFU/DFU_OUT/generated-*.dfu

If you are building the firmware yourself on macOS, it is unclear how you can create a DFU file. Instead you should use a binary file and specify the load address explicitly. To do that, use the DFU Release build target in STM32CubeIDE to produce a .bin binary file that you can load as follows:

dfu-util --alt 0 -s 0x8003000 --download "./MIDI_Commander_Custom/DFU Release/MIDI_Commander_Custom.bin"

Once the firmware is loaded, turn off the device and turn it back on in normal mode. You should see the name and version of the custom firmware on the display briefly, and then the name of the first configured bank. You can now load your own configuration following the instructions in the section Configuration.

Python development

Python files under python/ can be edited directly, however it is recommended to use the VS Code workspace at the root of this repository with the recommended extensions. It is configured to use auto-formatting with Black and type checking with MyPy.

The main entry point is python/CSV_to_Flash.py and some functionality is offloaded to modules under python/lib.

Acknowledgements

@harvie256: project founder
@eliericha: expansion to 10 commands per button

License

braceta/midi-commander-custom

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages