A reproduction of the Philips CM-153 LMSI controller

Cross-Platform SDR Software

Universal Zynq/AD9363 firmware builder

Firmware with overclock support for LibreSDR (PlutoSDR clone with Zynq 7020), 27.5 MSPS sample rate over Gigabit Ethernet with libiio/PlutoSDR API

low cost software radio platform

A proof-of-concept ChatGPT, Hugging Face and Ollama client for DOS with text-to-speech for Sound Blaster compatible systems.

Enhance resolution by capturing many images with off-axis illumination and combining in Fourier space. Adapted from https://github.com/Waller-Lab/FPM

IMSProg - software for CH341A-based programmers to work with I2C, SPI and MicroWire EEPROM/Flash chips

This is the latest version of the internal repository from Pebble Technology providing the software to run on Pebble watches. Proprietary source code has been removed from this repository and it wi…

μscope 🔬

Basic USB 1.1 Host Controller for small FPGAs

USB 1.1 PHY

This is a mirror of the original repository over at kernel.org. This github page is for discussions and issue reporting only. PRs can be discussed here but the patches need to go through the linux-…

Modern Generic SVGA driver for Windows 3.1

A Debian/Raspberry Pi WSPR decoding service

Universal Radio Hacker: Investigate Wireless Protocols Like A Boss

A web-based application to listen to radio transmissions from your browser using a cheap USB digital TV tuner

Creation of a AXI Master and Yocto device driver for Zynq, using High Level Synthesis (HLS) techniques.

A zero-copy Linux driver and a userspace interface library for Xilinx's AXI DMA and VDMA IP blocks. These serve as bridges for communication between the processing system and FPGA programmable logi…

ramlog like for systemd (Put log into a ram folder)

Minimal SDR with Lattice MachXO2 FPGA. And a port to Cyclone3 by Steven Groom

Real-time embedded variable & trace viewer

A complete project that can run Linux-3.12.74 on a microcontroller, and the hardware development environment is easily accessible.

List system USB buses and devices. A modern cross-platform lsusb that attempts to maintain compatibility with, but also add new features

Cannelloni either reads from stdin and writes to a Cypress FX chip through USB2.0 (outputting to parallel slave 16 bits bus, MSB first), or does the contrary: read from the chip and write to stdout.

Buildroot on Ebaz4205. How to create from scratch a complete BondMachine accelerated buildroot image for the Ebaz4205 board

Device Tree Compiler for Windows with precompiled dtc.exe