postgresql.conf-17.j2

# {{ ansible_managed }}
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
# "#" anywhere on a line.  The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal.  If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, run "pg_ctl reload", or execute
# "SELECT pg_reload_conf()".  Some parameters, which are marked below,
# require a server shutdown and restart to take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on".  Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units:  B  = bytes            Time units:  us  = microseconds
#                kB = kilobytes                     ms  = milliseconds
#                MB = megabytes                     s   = seconds
#                GB = gigabytes                     min = minutes
#                TB = terabytes                     h   = hours
#                                                   d   = days


#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------

# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.

data_directory = '{{ postgresql_data_directory }}'		# use data in another directory
					# (change requires restart)
hba_file = '{{ postgresql_hba_file }}'	# host-based authentication file
					# (change requires restart)
ident_file = '{{ postgresql_ident_file }}'	# ident configuration file
					# (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is written.
external_pid_file = '{{ postgresql_external_pid_file }}'			# write an extra PID file
					# (change requires restart)


#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------

# - Connection Settings -

listen_addresses = '{{ postgresql_listen_addresses | join(', ') }}'		# what IP address(es) to listen on;
					# comma-separated list of addresses;
					# defaults to 'localhost'; use '*' for all
					# (change requires restart)
port = {{ postgresql_port }}				# (change requires restart)
max_connections = {{ postgresql_max_connections }}			# (change requires restart)
reserved_connections = {{ postgresql_reserved_connections }}		# (change requires restart)
superuser_reserved_connections = {{ postgresql_superuser_reserved_connections }}	# (change requires restart)
unix_socket_directories = '{{ postgresql_unix_socket_directories | join(', ') }}'	# comma-separated list of directories
					# (change requires restart)
unix_socket_group = '{{ postgresql_unix_socket_group }}'			# (change requires restart)
unix_socket_permissions = {{ postgresql_unix_socket_permissions }}		# begin with 0 to use octal notation
					# (change requires restart)
bonjour = {{ 'on' if postgresql_bonjour else 'off' }}				# advertise server via Bonjour
					# (change requires restart)
bonjour_name = '{{ postgresql_bonjour_name }}'			# defaults to the computer name
					# (change requires restart)

# - TCP settings -
# see "man tcp" for details

tcp_keepalives_idle = {{ postgresql_tcp_keepalives_idle }}		# TCP_KEEPIDLE, in seconds;
					# 0 selects the system default
tcp_keepalives_interval = {{ postgresql_tcp_keepalives_interval }}		# TCP_KEEPINTVL, in seconds;
					# 0 selects the system default
tcp_keepalives_count = {{ postgresql_tcp_keepalives_count }}		# TCP_KEEPCNT;
					# 0 selects the system default
tcp_user_timeout = {{ postgresql_tcp_user_timeout }}			# TCP_USER_TIMEOUT, in milliseconds;
					# 0 selects the system default

client_connection_check_interval = {{ postgresql_client_connection_check_interval }}	# time between checks for client
					# disconnection while running queries;
					# 0 for never

# - Authentication -

authentication_timeout = {{ postgresql_authentication_timeout }}		# 1s-600s
password_encryption = {{ postgresql_password_encryption }}	# scram-sha-256 or md5
scram_iterations = {{ posgresql_scram_iterations }}

# GSSAPI using Kerberos
krb_server_keyfile = '{{ postgresql_krb_server_keyfile }}'
krb_caseins_users = {{ 'on' if postgresql_krb_caseins_users else 'off' }}
gss_accept_delegation = {{ 'on' if postgresql_gss_accept_delegation else 'off' }}

# - SSL -

ssl = {{ 'on' if postgresql_ssl else 'off' }}
ssl_ca_file = '{{ postgresql_ssl_ca_file }}'
ssl_cert_file = '{{ postgresql_ssl_cert_file }}'
ssl_crl_file = '{{ postgresql_ssl_crl_file }}'
ssl_crl_dir = '{{ postgresql_ssl_crl_dir }}'
ssl_key_file = '{{ postgresql_ssl_key_file }}'
ssl_ciphers = '{{ postgresql_ssl_ciphers | join(':') }}' # allowed SSL ciphers
ssl_prefer_server_ciphers = {{ 'on' if postgresql_ssl_prefer_server_ciphers else 'off' }}
ssl_ecdh_curve = '{{ postgresql_ssl_ecdh_curve }}'
ssl_min_protocol_version = '{{ postgresql_ssl_min_protocol_version }}'
ssl_max_protocol_version = '{{ postgresql_ssl_max_protocol_version }}'
ssl_dh_params_file = '{{ postgresql_ssl_dh_params_file }}'
ssl_passphrase_command = '{{ postgresql_ssl_passphrase_command }}'
ssl_passphrase_command_supports_reload = {{ 'on' if postgresql_ssl_passphrase_command_supports_reload else 'off' }}


#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------

# - Memory -

shared_buffers = {{ postgresql_shared_buffers }}			# min 128kB
					# (change requires restart)
huge_pages = {{ postgresql_huge_pages }}			# on, off, or try
					# (change requires restart)
huge_page_size = {{ postgresql_huge_page_size }}			# zero for system default
					# (change requires restart)
temp_buffers = {{ postgresql_temp_buffers }}			# min 800kB
max_prepared_transactions = {{ postgresql_max_prepared_transactions }}		# zero disables the feature
					# (change requires restart)
# Caution: it is not advisable to set max_prepared_transactions nonzero unless
# you actively intend to use prepared transactions.
work_mem = {{ postgresql_work_mem }}				# min 64kB
hash_mem_multiplier = {{ postgresql_hash_mem_multiplier }}		# 1-1000.0 multiplier on hash table work_mem
maintenance_work_mem = {{ postgresql_maintenance_work_mem }}		# min 64kB
autovacuum_work_mem = {{ postgresql_autovacuum_work_mem }}		# min 64kB, or -1 to use maintenance_work_mem
logical_decoding_work_mem = {{ postgresql_logical_decoding_work_mem }}	# min 64kB
max_stack_depth = {{ postgresql_max_stack_depth }}			# min 100kB
shared_memory_type = {{ postgresql_shared_memory_type }}		# the default is the first option
					# supported by the operating system:
					#   mmap
					#   sysv
					#   windows
					# (change requires restart)
dynamic_shared_memory_type = {{ postgresql_dynamic_shared_memory_type }}	# the default is usually the first option
					# supported by the operating system:
					#   posix
					#   sysv
					#   windows
					#   mmap
					# (change requires restart)
min_dynamic_shared_memory = {{ postgresql_min_dynamic_shared_memory }}	# (change requires restart)
vacuum_buffer_usage_limit = {{ postgresql_vacuum_buffer_usage_limit }}	# size of vacuum and analyze buffer access strategy ring;
					# 0 to disable vacuum buffer access strategy;
					# range 128kB to 16GB

# SLRU buffers (change requires restart)
commit_timestamp_buffers = {{ postgresql_commit_timestamp_buffers }}		# memory for pg_commit_ts (0 = auto)
multixact_offset_buffers = {{ postgresql_multixact_offset_buffers }}		# memory for pg_multixact/offsets
multixact_member_buffers = {{ postgresql_multixact_member_buffers }}		# memory for pg_multixact/members
notify_buffers = {{ postgresql_notify_buffers }}			# memory for pg_notify
serializable_buffers = {{ postgresql_serializable_buffers }}		# memory for pg_serial
subtransaction_buffers = {{ postgresql_subtransaction_buffers }}		# memory for pg_subtrans (0 = auto)
transaction_buffers = {{ postgresql_transaction_buffers }}		# memory for pg_xact (0 = auto)

# - Disk -

temp_file_limit = {{ postgresql_temp_file_limit }}			# limits per-process temp file space
					# in kilobytes, or -1 for no limit
					
max_notify_queue_pages = {{ postgresql_max_notify_queue_pages }}	# limits the number of SLRU pages allocated
					# for NOTIFY / LISTEN queue

# - Kernel Resources -

max_files_per_process = {{ postgresql_max_files_per_process }}			# min 64
					# (change requires restart)

# - Cost-Based Vacuum Delay -

vacuum_cost_delay = {{ postgresql_vacuum_cost_delay }}			# 0-100 milliseconds (0 disables)
vacuum_cost_page_hit = {{ postgresql_vacuum_cost_page_hit }}		# 0-10000 credits
vacuum_cost_page_miss = {{ postgresql_vacuum_cost_page_miss }}		# 0-10000 credits
vacuum_cost_page_dirty = {{ postgresql_vacuum_cost_page_dirty }}		# 0-10000 credits
vacuum_cost_limit = {{ postgresql_vacuum_cost_limit }}		# 1-10000 credits

# - Background Writer -

bgwriter_delay = {{ postgresql_bgwriter_delay }}			# 10-10000ms between rounds
bgwriter_lru_maxpages = {{ postgresql_bgwriter_lru_maxpages }}		# max buffers written/round, 0 disables
bgwriter_lru_multiplier = {{ postgresql_bgwriter_lru_multiplier }}		# 0-10.0 multiplier on buffers scanned/round
bgwriter_flush_after = {{ postgresql_bgwriter_flush_after }}		# measured in pages, 0 disables

# - Asynchronous Behavior -

backend_flush_after = {{ postgresql_backend_flush_after }}		# measured in pages, 0 disables
effective_io_concurrency = {{ postgresql_effective_io_concurrency }}		# 1-1000; 0 disables prefetching
maintenance_io_concurrency = {{ postgresql_maintenance_io_concurrency }}	# 1-1000; 0 disables prefetching
io_combine_limit = {{ postgresql_io_combine_limit }}		# usually 1-32 blocks (depends on OS)
max_worker_processes = {{ postgresql_max_worker_processes }}		# (change requires restart)
max_parallel_workers_per_gather = {{ postgresql_max_parallel_workers_per_gather }}	# taken from max_parallel_workers
max_parallel_maintenance_workers = {{ postgresql_max_parallel_maintenance_workers }}	# taken from max_parallel_workers
max_parallel_workers = {{ postgresql_max_parallel_workers }}		# maximum number of max_worker_processes that
					# can be used in parallel operations
parallel_leader_participation = {{ 'on' if postgresql_parallel_leader_participation else 'off' }}


#------------------------------------------------------------------------------
# WRITE-AHEAD LOG
#------------------------------------------------------------------------------

# - Settings -

wal_level = {{ postgresql_wal_level }}			# minimal, replica, or logical
					# (change requires restart)
fsync = {{ 'on' if postgresql_fsync else 'off' }}				# flush data to disk for crash safety
					# (turning this off can cause
					# unrecoverable data corruption)
synchronous_commit = {{ postgresql_synchronous_commit }}		# synchronization level;
					# off, local, remote_write, remote_apply, or on
wal_sync_method = {{ postgresql_wal_sync_method }}		# the default is the first option
					# supported by the operating system:
					#   open_datasync
					#   fdatasync (default on Linux and FreeBSD)
					#   fsync
					#   fsync_writethrough
					#   open_sync
full_page_writes = {{ 'on' if postgresql_full_page_writes else 'off' }}			# recover from partial page writes
wal_log_hints = {{ 'on' if postgresql_wal_log_hints else 'off' }}			# also do full page writes of non-critical updates
					# (change requires restart)
wal_compression = {{ 'on' if postgresql_wal_compression else 'off' }}			# enables compression of full-page writes;
					# off, pglz, lz4, zstd, or on
wal_init_zero = {{ 'on' if postgresql_wal_init_zero else 'off' }}			# zero-fill new WAL files
wal_recycle = {{ 'on' if postgresql_wal_recycle else 'off' }}			# recycle WAL files
wal_buffers = {{ postgresql_wal_buffers }}			# min 32kB, -1 sets based on shared_buffers
					# (change requires restart)
wal_writer_delay = {{ postgresql_wal_writer_delay }}		# 1-10000 milliseconds
wal_writer_flush_after = {{ postgresql_wal_writer_flush_after }}		# measured in pages, 0 disables
wal_skip_threshold = {{ postgresql_wal_skip_threshold }}

commit_delay = {{ postgresql_commit_delay }}			# range 0-100000, in microseconds
commit_siblings = {{ postgresql_commit_siblings }}			# range 1-1000

# - Checkpoints -

checkpoint_timeout = {{ postgresql_checkpoint_timeout }}		# range 30s-1d
checkpoint_completion_target = {{ postgresql_checkpoint_completion_target }}	# checkpoint target duration, 0.0 - 1.0
checkpoint_flush_after = {{ postgresql_checkpoint_flush_after }}		# measured in pages, 0 disables
checkpoint_warning = {{ postgresql_checkpoint_warning }}		# 0 disables
max_wal_size = {{ postgresql_max_wal_size }}
min_wal_size = {{ postgresql_min_wal_size }}

# - Prefetching during recovery -

recovery_prefetch = {{ postgresql_recovery_prefetch }}		# prefetch pages referenced in the WAL?
wal_decode_buffer_size = {{ postgresql_wal_decode_buffer_size }}		# lookahead window used for prefetching
				# (change requires restart)

# - Archiving -

archive_mode = {{ 'on' if ( postgresql_archive_mode | bool == true or postgresql_archive_mode == 'on' ) else ( 'always' if postgresql_archive_mode == 'always' else 'off' ) }}		# enables archiving; off, on, or always
				# (change requires restart)
archive_library = '{{ postgresql_archive_library }}'		# library to use to archive a logfile segment
				# (empty string indicates archive_command should
				# be used)
archive_command = '{{ postgresql_archive_command }}'		# command to use to archive a logfile segment
				# placeholders: %p = path of file to archive
				#               %f = file name only
				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
archive_timeout = {{ postgresql_archive_timeout }}		# force a logfile segment switch after this
				# number of seconds; 0 disables

# - Archive Recovery -

# These are only used in recovery mode.

restore_command = '{{ postgresql_restore_command }}'		# command to use to restore an archived WAL file
				# placeholders: %p = path of file to restore
				#               %f = file name only
				# e.g. 'cp /mnt/server/archivedir/%f %p'
archive_cleanup_command = '{{ postgresql_archive_cleanup_command }}'	# command to execute at every restartpoint
recovery_end_command = '{{ postgresql_recovery_end_command }}'	# command to execute at completion of recovery

# - Recovery Target -

# Set these only when performing a targeted recovery.

recovery_target = '{{ postgresql_recovery_target }}'		# 'immediate' to end recovery as soon as a
                                # consistent state is reached
				# (change requires restart)
recovery_target_name = '{{ postgresql_recovery_target_name }}'	# the named restore point to which recovery will proceed
				# (change requires restart)
recovery_target_time = '{{ postgresql_recovery_target_time }}'	# the time stamp up to which recovery will proceed
				# (change requires restart)
recovery_target_xid = '{{ postgresql_recovery_target_xid }}'	# the transaction ID up to which recovery will proceed
				# (change requires restart)
recovery_target_lsn = '{{ postgresql_recovery_target_lsn }}'	# the WAL LSN up to which recovery will proceed
				# (change requires restart)
recovery_target_inclusive = {{ 'on' if postgresql_recovery_target_inclusive else 'off' }} # Specifies whether to stop:
				# just after the specified recovery target (on)
				# just before the recovery target (off)
				# (change requires restart)
recovery_target_timeline = '{{ postgresql_recovery_target_timeline }}'	# 'current', 'latest', or timeline ID
				# (change requires restart)
recovery_target_action = '{{ postgresql_recovery_target_action }}'	# 'pause', 'promote', 'shutdown'
				# (change requires restart)

# - WAL Summarization -

summarize_wal = {{ 'on' if postgresql_summarize_wal else 'off' }}		# run WAL summarizer process?
wal_summary_keep_time = '{{ postgresql_wal_summary_keep_time }}'	# when to remove old summary files, 0 = never


#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------

# - Sending Servers -

# Set these on the primary and on any standby that will send replication data.

max_wal_senders = {{ postgresql_max_wal_senders }}		# max number of walsender processes
				# (change requires restart)
max_replication_slots = {{ postgresql_max_replication_slots }}	# max number of replication slots
				# (change requires restart)
wal_keep_size = {{ postgresql_wal_keep_size }}		# in megabytes; 0 disables
max_slot_wal_keep_size = {{ postgresql_max_slot_wal_keep_size }}	# in megabytes; -1 disables
wal_sender_timeout = {{ postgresql_wal_sender_timeout }}	# in milliseconds; 0 disables
track_commit_timestamp = {{ 'on' if postgresql_track_commit_timestamp else 'off' }}	# collect timestamp of transaction commit
				# (change requires restart)

# - Primary Server -

# These settings are ignored on a standby server.

synchronous_standby_names = '{% if postgresql_synchronous_standby_names != [] %}{% if postgresql_synchronous_standby_choose_sync != "" and postgresql_synchronous_standby_num_sync != "" %}{{ postgresql_synchronous_standby_choose_sync }} {% endif %}{% if postgresql_synchronous_standby_num_sync != "" %}{{ postgresql_synchronous_standby_num_sync }} ({% endif %}"{{ postgresql_synchronous_standby_names | join('\",\"') }}"{% if postgresql_synchronous_standby_num_sync != "" %}){% endif %}{% endif %}'	# standby servers that provide sync rep
				# method to choose sync standbys, number of sync standbys,
				# and comma-separated list of application_name
				# from standby(s); '*' = all
synchronized_standby_slots = '{{ postgresql_synchronized_standby_slots }}'	# streaming replication standby server slot
				# names that logical walsender processes will wait for

# - Standby Servers -

# These settings are ignored on a primary server.

primary_conninfo = '{{ postgresql_primary_conninfo }}'			# connection string to sending server
primary_slot_name = '{{ postgresql_primary_slot_name }}'			# replication slot on sending server
hot_standby = {{ 'on' if postgresql_hot_standby else 'off' }}			# "off" disallows queries during recovery
					# (change requires restart)
max_standby_archive_delay = {{ postgresql_max_standby_archive_delay }}	# max delay before canceling queries
					# when reading WAL from archive;
					# -1 allows indefinite delay
max_standby_streaming_delay = {{ postgresql_max_standby_streaming_delay }}	# max delay before canceling queries
					# when reading streaming WAL;
					# -1 allows indefinite delay
wal_receiver_create_temp_slot = {{ 'on' if postgresql_wal_receiver_create_temp_slot else 'off' }}	# create temp slot if primary_slot_name
					# is not set
wal_receiver_status_interval = {{ postgresql_wal_receiver_status_interval }}	# send replies at least this often
					# 0 disables
hot_standby_feedback = {{ 'on' if postgresql_hot_standby_feedback else 'off' }}		# send info from standby to prevent
					# query conflicts
wal_receiver_timeout = {{ postgresql_wal_receiver_timeout }}		# time that receiver waits for
					# communication from primary
					# in milliseconds; 0 disables
wal_retrieve_retry_interval = {{ postgresql_wal_retrieve_retry_interval }}	# time to wait before retrying to
					# retrieve WAL after a failed attempt
recovery_min_apply_delay = {{ postgresql_recovery_min_apply_delay }}		# minimum delay for applying changes during recovery
sync_replication_slots = {{ 'on' if postgresql_sync_replication_slots else 'off' }}		# enables slot synchronization on the physical standby from the primary

# - Subscribers -

# These settings are ignored on a publisher.

max_logical_replication_workers = {{ postgresql_max_logical_replication_workers }}	# taken from max_worker_processes
					# (change requires restart)
max_sync_workers_per_subscription = {{ postgresql_max_sync_workers_per_subscription }}	# taken from max_logical_replication_workers
max_parallel_apply_workers_per_subscription = {{ postgresql_max_parallel_apply_workers_per_subscription }}	# taken from max_logical_replication_workers


#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------

# - Planner Method Configuration -

enable_async_append = {{ 'on' if postgresql_enable_async_append else 'off' }}
enable_bitmapscan = {{ 'on' if postgresql_enable_bitmapscan else 'off' }}
enable_gathermerge = {{ 'on' if postgresql_enable_gathermerge else 'off' }}
enable_hashagg = {{ 'on' if postgresql_enable_hashagg else 'off' }}
enable_hashjoin = {{ 'on' if postgresql_enable_hashjoin else 'off' }}
enable_incremental_sort = {{ 'on' if postgresql_enable_incremental_sort else 'off' }}
enable_indexscan = {{ 'on' if postgresql_enable_indexscan else 'off' }}
enable_indexonlyscan = {{ 'on' if postgresql_enable_indexonlyscan else 'off' }}
enable_material = {{ 'on' if postgresql_enable_material else 'off' }}
enable_memoize = {{ 'on' if postgresql_enable_memoize else 'off' }}
enable_mergejoin = {{ 'on' if postgresql_enable_mergejoin else 'off' }}
enable_nestloop = {{ 'on' if postgresql_enable_nestloop else 'off'  }}
enable_parallel_append = {{ 'on' if postgresql_enable_parallel_append else 'off' }}
enable_parallel_hash = {{ 'on' if postgresql_enable_parallel_hash else 'off' }}
enable_partition_pruning = {{ 'on' if postgresql_enable_partition_pruning else 'off' }}
enable_partitionwise_join = {{ 'on' if postgresql_enable_partitionwise_join else 'off' }}
enable_partitionwise_aggregate = {{ 'on' if postgresql_enable_partitionwise_aggregate else 'off' }}
enable_presorted_aggregate = {{ 'on' if postgres_enable_presorted_aggregate else 'off' }}
enable_seqscan = {{ 'on' if postgresql_enable_seqscan else 'off' }}
enable_sort = {{ 'on' if postgresql_enable_sort else 'off' }}
enable_tidscan = {{ 'on' if postgresql_enable_tidscan else 'off' }}
enable_group_by_reordering = {{ 'on' if postgresql_enable_group_by_reordering else 'off' }}

# - Planner Cost Constants -

seq_page_cost = {{ postgresql_seq_page_cost }}			# measured on an arbitrary scale
random_page_cost = {{ postgresql_random_page_cost }}			# same scale as above
cpu_tuple_cost = {{ postgresql_cpu_tuple_cost }}			# same scale as above
cpu_index_tuple_cost = {{ postgresql_cpu_index_tuple_cost }}		# same scale as above
cpu_operator_cost = {{ postgresql_cpu_operator_cost }}		# same scale as above
parallel_setup_cost = {{ postgresql_parallel_setup_cost }}	# same scale as above
parallel_tuple_cost = {{ postgresql_parallel_tuple_cost }}		# same scale as above
min_parallel_table_scan_size = {{ postgresql_min_parallel_table_scan_size }}
min_parallel_index_scan_size = {{ postgresql_min_parallel_index_scan_size }}
effective_cache_size = {{ postgresql_effective_cache_size }}

jit_above_cost = {{ postgresql_jit_above_cost }}		# perform JIT compilation if available
					# and query more expensive than this;
					# -1 disables
jit_inline_above_cost = {{ postgresql_jit_inline_above_cost }}		# inline small functions if query is
					# more expensive than this; -1 disables
jit_optimize_above_cost = {{ postgresql_jit_optimize_above_cost }}	# use expensive JIT optimizations if
					# query is more expensive than this;
					# -1 disables

# - Genetic Query Optimizer -

geqo = {{ 'on' if postgresql_geqo else 'off' }}
geqo_threshold = {{ postgresql_geqo_threshold }}
geqo_effort = {{ postgresql_geqo_effort }}			# range 1-10
geqo_pool_size = {{ postgresql_geqo_pool_size }}			# selects default based on effort
geqo_generations = {{ postgresql_geqo_generations }}			# selects default based on effort
geqo_selection_bias = {{ postgresql_geqo_selection_bias }}		# range 1.5-2.0
geqo_seed = {{ postgresql_geqo_seed }}			# range 0.0-1.0

# - Other Planner Options -

default_statistics_target = {{ postgresql_default_statistics_target }}	# range 1-10000
constraint_exclusion = {{ postgresql_constraint_exclusion }}	# on, off, or partition
cursor_tuple_fraction = {{ postgresql_cursor_tuple_fraction }}		# range 0.0-1.0
from_collapse_limit = {{ postgresql_from_collapse_limit }}
jit = {{ 'on' if postgresql_jit else 'off' }}				# allow JIT compilation
join_collapse_limit = {{ postgresql_join_collapse_limit }}		# 1 disables collapsing of explicit
					# JOIN clauses
plan_cache_mode = {{ postgresql_plan_cache_mode }}			# auto, force_generic_plan or
					# force_custom_plan
recursive_worktable_factor = {{ postgresql_recursive_worktable_factor }}	# range 0.001-1000000


#------------------------------------------------------------------------------
# REPORTING AND LOGGING
#------------------------------------------------------------------------------

# - Where to Log -

log_destination = '{{ postgresql_log_destination }}'		# Valid values are combinations of
					# stderr, csvlog, jsonlog, syslog, and
					# eventlog, depending on platform.
					# csvlog and jsonlog require
					# logging_collector to be on.

# This is used when logging to stderr:
logging_collector = {{ 'on' if postgresql_logging_collector else 'off' }}		# Enable capturing of stderr, jsonlog,
					# and csvlog into log files. Required
					# to be on for csvlogs and jsonlogs.
					# (change requires restart)

# These are only used if logging_collector is on:
log_directory = '{{ postgresql_log_directory }}'			# directory where log files are written,
					# can be absolute or relative to PGDATA
log_filename = '{{ postgresql_log_filename }}'	# log file name pattern,
					# can include strftime() escapes
log_file_mode = {{ postgresql_log_file_mode }}			# creation mode for log files,
					# begin with 0 to use octal notation
log_rotation_age = {{ postgresql_log_rotation_age }}			# Automatic rotation of logfiles will
					# happen after that time.  0 disables.
log_rotation_size = {{ postgresql_log_rotation_size }}			# Automatic rotation of logfiles will
					# happen after that much log output.
					# 0 disables.
log_truncate_on_rotation = {{ 'on' if postgresql_log_truncate_on_rotation else 'off' }}		# If on, an existing log file with the
					# same name as the new log file will be
					# truncated rather than appended to.
					# But such truncation only occurs on
					# time-driven rotation, not on restarts
					# or size-driven rotation.  Default is
					# off, meaning append to existing files
					# in all cases.

# These are relevant when logging to syslog:
syslog_facility = '{{ postgresql_syslog_facility }}'
syslog_ident = '{{ postgresql_syslog_ident }}'
syslog_sequence_numbers = {{ 'on' if postgresql_syslog_sequence_numbers else 'off' }}
syslog_split_messages = {{ 'on' if postgresql_syslog_split_messages else 'off' }}

# This is only relevant when logging to eventlog (Windows):
# (change requires restart)
event_source = '{{ postgresql_event_source }}'

# - When to Log -

log_min_messages = {{ postgresql_log_min_messages }}		# values in order of decreasing detail:
					#   debug5
					#   debug4
					#   debug3
					#   debug2
					#   debug1
					#   info
					#   notice
					#   warning
					#   error
					#   log
					#   fatal
					#   panic

log_min_error_statement = {{ postgresql_log_min_error_statement }}	# values in order of decreasing detail:
					#   debug5
					#   debug4
					#   debug3
					#   debug2
					#   debug1
					#   info
					#   notice
					#   warning
					#   error
					#   log
					#   fatal
					#   panic (effectively off)

log_min_duration_statement = {{ postgresql_log_min_duration_statement }}	# -1 is disabled, 0 logs all statements
					# and their durations, > 0 logs only
					# statements running at least this number
					# of milliseconds

log_min_duration_sample = {{ postgresql_log_min_duration_sample }}		# -1 is disabled, 0 logs a sample of statements
					# and their durations, > 0 logs only a sample of
					# statements running at least this number
					# of milliseconds;
					# sample fraction is determined by log_statement_sample_rate

log_statement_sample_rate = {{ postgresql_log_statement_sample_rate }}	# fraction of logged statements exceeding
					# log_min_duration_sample to be logged;
					# 1.0 logs all such statements, 0.0 never logs


log_transaction_sample_rate = {{ postgresql_log_transaction_sample_rate }}	# fraction of transactions whose statements
					# are logged regardless of their duration; 1.0 logs all
					# statements from all transactions, 0.0 never logs

log_startup_progress_interval = {{ postgresql_log_startup_progress_interval }}	# Time between progress updates for
					# long-running startup operations.
					# 0 disables the feature, > 0 indicates
					# the interval in milliseconds.

# - What to Log -

debug_print_parse = {{ 'on' if postgresql_debug_print_parse else 'off' }}
debug_print_rewritten = {{ 'on' if postgresql_debug_print_rewritten else 'off' }}
debug_print_plan = {{ 'on' if postgresql_debug_print_plan else 'off' }}
debug_pretty_print = {{ 'on' if postgresql_debug_pretty_print else 'off' }}
log_autovacuum_min_duration = {{ postgresql_log_autovacuum_min_duration }}	# log autovacuum activity;
					# -1 disables, 0 logs all actions and
					# their durations, > 0 logs only
					# actions running at least this number
					# of milliseconds.
log_checkpoints = {{ 'on' if postgresql_log_checkpoints else 'off' }}
log_connections = {{ 'on' if postgresql_log_connections else 'off' }}
log_disconnections = {{ 'on' if postgresql_log_disconnections else 'off' }}
log_duration = {{ 'on' if postgresql_log_duration else 'off' }}
log_error_verbosity = {{ postgresql_log_error_verbosity }}		# terse, default, or verbose messages
log_hostname = {{ 'on' if postgresql_log_hostname else 'off' }}
log_line_prefix = '{{ postgresql_log_line_prefix }}'		# special values:
					#   %a = application name
					#   %u = user name
					#   %d = database name
					#   %r = remote host and port
					#   %h = remote host
					#   %b = backend type
					#   %p = process ID
					#   %P = process ID of parallel group leader
					#   %t = timestamp without milliseconds
					#   %m = timestamp with milliseconds
					#   %n = timestamp with milliseconds (as a Unix epoch)
					#   %Q = query ID (0 if none or not computed)
					#   %i = command tag
					#   %e = SQL state
					#   %c = session ID
					#   %l = session line number
					#   %s = session start timestamp
					#   %v = virtual transaction ID
					#   %x = transaction ID (0 if none)
					#   %q = stop here in non-session
					#        processes
					#   %% = '%'
					# e.g. '<%u%%%d> '
log_lock_waits = {{ 'on' if postgresql_log_lock_waits else 'off' }}			# log lock waits >= deadlock_timeout
log_recovery_conflict_waits = {{ 'on' if postgresql_log_recovery_conflict_waits else 'off' }}	# log standby recovery conflict waits
					# >= deadlock_timeout
log_parameter_max_length = {{ postgresql_log_parameter_max_length }}		# when logging statements, limit logged
					# bind-parameter values to N bytes;
					# -1 means print in full, 0 disables
log_parameter_max_length_on_error = {{ postgresql_log_parameter_max_length_on_error }}	# when logging an error, limit logged
					# bind-parameter values to N bytes;
					# -1 means print in full, 0 disables
log_statement = '{{ postgresql_log_statement }}'			# none, ddl, mod, all
log_replication_commands = {{ 'on' if postgresql_log_replication_commands else 'off' }}
log_temp_files = {{ postgresql_log_temp_files }}			# log temporary files equal or larger
					# than the specified size in kilobytes;
					# -1 disables, 0 logs all temp files
log_timezone = '{{ postgresql_log_timezone }}'

# - Process Title -

cluster_name = '{{ postgresql_cluster_name }}'			# added to process titles if nonempty
					# (change requires restart)
update_process_title = {{ 'on' if postgresql_update_process_title else 'off' }}


#------------------------------------------------------------------------------
# STATISTICS
#------------------------------------------------------------------------------

# - Cumulative Query and Index Statistics -

track_activities = {{ 'on' if postgresql_track_activities else 'off' }}
track_activity_query_size = {{ postgresql_track_activity_query_size }}	# (change requires restart)
track_counts = {{ 'on' if postgresql_track_counts else 'off' }}
track_io_timing = {{ 'on' if postgresql_track_io_timing else 'off' }}
track_wal_io_timing = {{ 'on' if postgresql_track_wal_io_timing else 'off' }}
track_functions = {{ postgresql_track_functions }}			# none, pl, all
stats_fetch_consistency = {{ postgresql_stats_fetch_consistency }}	# cache, none, snapshot


# - Monitoring -

compute_query_id = {{ postgresql_compute_query_id }}
log_statement_stats = {{ 'on' if postgresql_log_statement_stats else 'off' }}
log_parser_stats = {{ 'on' if postgresql_log_parser_stats else 'off' }}
log_planner_stats = {{ 'on' if postgresql_log_planner_stats else 'off' }}
log_executor_stats = {{ 'on' if postgresql_log_executor_stats else 'off' }}


#------------------------------------------------------------------------------
# AUTOVACUUM
#------------------------------------------------------------------------------

autovacuum = {{ 'on' if postgresql_autovacuum else 'off' }}			# Enable autovacuum subprocess?  'on'
					# requires track_counts to also be on.
autovacuum_max_workers = {{ postgresql_autovacuum_max_workers }}		# max number of autovacuum subprocesses
					# (change requires restart)
autovacuum_naptime = {{ postgresql_autovacuum_naptime }}		# time between autovacuum runs
autovacuum_vacuum_threshold = {{ postgresql_autovacuum_vacuum_threshold }}	# min number of row updates before
					# vacuum
autovacuum_vacuum_insert_threshold = {{ postgresql_autovacuum_vacuum_insert_threshold }}	# min number of row inserts
					# before vacuum; -1 disables insert
					# vacuums
autovacuum_analyze_threshold = {{ postgresql_autovacuum_analyze_threshold }}	# min number of row updates before
					# analyze
autovacuum_vacuum_scale_factor = {{ postgresql_autovacuum_vacuum_scale_factor }}	# fraction of table size before vacuum
autovacuum_vacuum_insert_scale_factor = {{ postgresql_autovacuum_vacuum_insert_scale_factor }}	# fraction of inserts over table
					# size before insert vacuum
autovacuum_analyze_scale_factor = {{ postgresql_autovacuum_analyze_scale_factor }}	# fraction of table size before analyze
autovacuum_freeze_max_age = {{ postgresql_autovacuum_freeze_max_age }}	# maximum XID age before forced vacuum
					# (change requires restart)
autovacuum_multixact_freeze_max_age = {{ postgresql_autovacuum_multixact_freeze_max_age }}	# maximum multixact age
					# before forced vacuum
					# (change requires restart)
autovacuum_vacuum_cost_delay = {{ postgresql_autovacuum_vacuum_cost_delay }}	# default vacuum cost delay for
					# autovacuum, in milliseconds;
					# -1 means use vacuum_cost_delay
autovacuum_vacuum_cost_limit = {{ postgresql_autovacuum_vacuum_cost_limit }}	# default vacuum cost limit for
					# autovacuum, -1 means use
					# vacuum_cost_limit


#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------

# - Statement Behavior -

client_min_messages = {{ postgresql_client_min_messages }}		# values in order of decreasing detail:
					#   debug5
					#   debug4
					#   debug3
					#   debug2
					#   debug1
					#   log
					#   notice
					#   warning
					#   error
search_path = '{{ postgresql_search_path | join(', ') }}'	# schema names
row_security = {{ 'on' if postgresql_row_security else 'off' }}
default_table_access_method = '{{ postgresql_default_table_access_method }}'
default_tablespace = '{{ postgresql_default_tablespace }}'		# a tablespace name, '' uses the default
default_toast_compression = '{{ postgresql_default_toast_compression }}' # 'pglz' or 'lz4'
temp_tablespaces = '{{ postgresql_temp_tablespaces | join(', ') }}'			# a list of tablespace names, '' uses
					# only default tablespace
check_function_bodies = {{ 'on' if postgresql_check_function_bodies else 'off' }}
default_transaction_isolation = '{{ postgresql_default_transaction_isolation }}'
default_transaction_read_only = {{ 'on' if postgresql_default_transaction_read_only else 'off' }}
default_transaction_deferrable = {{ 'on' if postgresql_default_transaction_deferrable else 'off' }}
session_replication_role = '{{ postgresql_session_replication_role }}'
statement_timeout = {{ postgresql_statement_timeout }}				# in milliseconds, 0 is disabled
transaction_timeout = {{ postgresql_transaction_timeout }}			# in milliseconds, 0 is disabled
lock_timeout = {{ postgresql_lock_timeout }}			# in milliseconds, 0 is disabled
idle_in_transaction_session_timeout = {{ postgresql_idle_in_transaction_session_timeout }}	# in milliseconds, 0 is disabled
idle_session_timeout = {{ postgresql_idle_session_timeout }}		# in milliseconds, 0 is disabled
vacuum_freeze_table_age = {{ postgresql_vacuum_freeze_table_age }}
vacuum_freeze_min_age = {{ postgresql_vacuum_freeze_min_age }}
vacuum_failsafe_age = {{ postgresql_vacuum_failsafe_age }}
vacuum_multixact_freeze_table_age = {{ postgresql_vacuum_multixact_freeze_table_age }}
vacuum_multixact_freeze_min_age = {{ postgresql_vacuum_multixact_freeze_min_age }}
vacuum_multixact_failsafe_age = {{ postgresql_vacuum_multixact_failsafe_age }}
bytea_output = '{{ postgresql_bytea_output }}'			# hex, escape
xmlbinary = '{{ postgresql_xmlbinary }}'
xmloption = '{{ postgresql_xmloption }}'
gin_pending_list_limit = {{ postgresql_gin_pending_list_limit }}
createrole_self_grant = '{{ postgresql_createrole_self_grant }}'		# set and/or inherit
event_triggers = {{ 'on' if postgresql_event_triggers else 'off' }}

# - Locale and Formatting -

datestyle = '{{ postgresql_datestyle | join(', ') }}'
intervalstyle = '{{ postgresql_intervalstyle }}'
timezone = '{{ postgresql_timezone }}'
timezone_abbreviations = '{{ postgresql_timezone_abbreviations }}'     # Select the set of available time zone
					# abbreviations.  Currently, there are
					#   Default
					#   Australia (historical usage)
					#   India
					# You can create your own file in
					# share/timezonesets/.
extra_float_digits = {{ postgresql_extra_float_digits }}			# min -15, max 3; any value >0 actually
					# selects precise output mode
{% if not postgresql_client_encoding %}
#client_encoding = sql_ascii		# actually, defaults to database
{% else %}
client_encoding = {{ postgresql_client_encoding }}		# actually, defaults to database
{% endif %}
					# encoding

# These settings are initialized by initdb, but they can be changed.
lc_messages = '{{ postgresql_lc_messages }}'			# locale for system error message
					# strings
lc_monetary = '{{ postgresql_lc_monetary }}'			# locale for monetary formatting
lc_numeric = '{{ postgresql_lc_numeric }}'			# locale for number formatting
lc_time = '{{ postgresql_lc_time }}'				# locale for time formatting

icu_validation_level = {{ postgresql_icu_validation_level }}		# report ICU locale validation
					# errors at the given level

# default configuration for text search
default_text_search_config = '{{ postgresql_default_text_search_config }}'

# - Shared Library Preloading -

local_preload_libraries = '{{ postgresql_local_preload_libraries | join(', ') }}'
session_preload_libraries = '{{ postgresql_session_preload_libraries | join(', ') }}'
shared_preload_libraries = '{{ postgresql_shared_preload_libraries | join(', ') }}'	# (change requires restart)
jit_provider = '{{ postgresql_jit_provider }}'		# JIT library to use

# - Other Defaults -

dynamic_library_path = '{{ postgresql_dynamic_library_path }}'
{% if postgresql_extension_destdir is defined and ansible_os_family == 'Debian' %}
extension_destdir = '{{ postgresql_extension_destdir }}'			# prepend path when loading extensions
					# and shared objects (added by Debian)
{% endif %}
gin_fuzzy_search_limit = {{ postgresql_gin_fuzzy_search_limit }}


#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------

deadlock_timeout = {{ postgresql_deadlock_timeout }}
max_locks_per_transaction = {{ postgresql_max_locks_per_transaction }}		# min 10
					# (change requires restart)
max_pred_locks_per_transaction = {{ postgresql_max_pred_locks_per_transaction }}	# min 10
					# (change requires restart)
max_pred_locks_per_relation = {{ postgresql_max_pred_locks_per_relation }}	# negative values mean
					# (max_pred_locks_per_transaction
					#  / -max_pred_locks_per_relation) - 1
max_pred_locks_per_page = {{ postgresql_max_pred_locks_per_page }}            # min 0


#------------------------------------------------------------------------------
# VERSION AND PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------

# - Previous PostgreSQL Versions -

array_nulls = {{ 'on' if postgresql_array_nulls else 'off' }}
backslash_quote = {{ postgresql_backslash_quote }}	# on, off, or safe_encoding
escape_string_warning = {{ 'on' if postgresql_escape_string_warning else 'off' }}
lo_compat_privileges = {{ 'on' if postgresql_lo_compat_privileges else 'off' }}
quote_all_identifiers = {{ 'on' if postgresql_quote_all_identifiers else 'off' }}
standard_conforming_strings = {{ 'on' if postgresql_standard_conforming_strings else 'off' }}
synchronize_seqscans = {{ 'on' if postgresql_synchronize_seqscans else 'off' }}

# - Other Platforms and Clients -

transform_null_equals = {{ 'on' if postgresql_transform_null_equals else 'off' }}
allow_alter_system = {{ 'on' if postgresql_allow_alter_system else 'off' }}

#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------

exit_on_error = {{ 'on' if postgresql_exit_on_error else 'off' }}			# terminate session on any error?
restart_after_crash = {{ 'on' if postgresql_restart_after_crash else 'off' }}		# reinitialize after backend crash?
data_sync_retry = {{ 'on' if postgresql_data_sync_retry else 'off' }}			# retry or panic on failure to fsync
					# data?
					# (change requires restart)
recovery_init_sync_method = {{ postgresql_recovery_init_sync_method }}	# fsync, syncfs (Linux 5.8+)


#------------------------------------------------------------------------------
# CONFIG FILE INCLUDES
#------------------------------------------------------------------------------

# These options allow settings to be loaded from files other than the
# default postgresql.conf.  Note that these are directives, not variable
# assignments, so they can usefully be given more than once.

include_dir = '{{ postgresql_include_dir }}'			# include files ending in '.conf' from
					# a directory, e.g., 'conf.d'
{{ '#' if not postgresql_include_if_exists | bool else '' }}include_if_exists = '{{ postgresql_include_if_exists }}'		# include file only if it exists
{{ '#' if not postgresql_include | bool else '' }}include = '{{ postgresql_include }}'			# include file


#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------

# Add settings for extensions here