toolchain.sh

#!/bin/bash
if [ -f variables.sh ]; then
	. variables.sh
fi
. ghost.sh


#
# === Ghost Toolchain setup script ===
#
# This script attempts to download, patch and build the Ghost-specific toolchain
# so that your host system is capable of building binaries for Ghost.
# 
# The following pre-requirements must be installed on your system:
#
#    gcc g++ nasm make texinfo flex bison
#    libmpfr-dev libgmp-dev libmpc-dev autoconf pkg-config
#    grub-pc-bin xorriso
#
# The build will fail if any of these requirements are not present.
# To modify parameters, check the "variables.sh.template".
#

echo ""
printf "\e[44mGhost Toolchain setup script\e[0m\n"
echo ""
echo "Target architecture:    $TARGET"
echo "Toolchain base:         $TOOLCHAIN_BASE"
echo ""


# Archive sources & patch versions
GCC_ARCHIVE=https://ftp.gnu.org/gnu/gcc/gcc-12.2.0/gcc-12.2.0.tar.gz
GCC_PATCH=patches/toolchain/gcc-12.2.0-ghost-1.0.patch
GCC_UNPACKED=gcc-12.2.0

BINUTILS_ARCHIVE=https://ftp.gnu.org/gnu/binutils/binutils-2.39.tar.gz
BINUTILS_PATCH=patches/toolchain/binutils-2.39-ghost-1.0.patch
BINUTILS_UNPACKED=binutils-2.39


# Add toolchain bin folder to PATH
PATH=$PATH:$TOOLCHAIN_BASE/bin


# Default definitions
with REQUIRED_AUTOCONF "autoconf (GNU Autoconf) 2.69"
with AUTOMAKE	automake
with AUTOCONF	autoconf
with HOST_CXX	g++


# Parse parameters
STEP_DOWNLOAD=1
STEP_CLEAN=0
STEP_UNPACK=1
STEP_PATCH=1

STEP_BUILD_BINUTILS=1
STEP_BUILD_GCC=1

for var in "$@"; do
	if [ $var == "--skip-archives" ]; then
		STEP_DOWNLOAD=0
		STEP_UNPACK=0
		STEP_PATCH=0
	elif [ $var == "--skip-download" ]; then
		STEP_DOWNLOAD=0
	elif [ $var == "--skip-unpack" ]; then
		STEP_UNPACK=0
	elif [ $var == "--skip-patch" ]; then
		STEP_PATCH=0
	elif [ $var == "--skip-build-binutils" ]; then
		STEP_BUILD_BINUTILS=0
	elif [ $var == "--skip-build-gcc" ]; then
		STEP_BUILD_GCC=0
	elif [ $var == "--clean" ]; then
		STEP_CLEAN=1
	elif [ $var == "--help" ]; then
		echo "Run this script to build a cross toolchain for your host system."
		echo "The following flags are available:"
		echo
		echo "	--skip-download			Skips the downloading of binutils/gcc archives"
		echo "	--skip-unpack			Skips the unpacking of said archives"
		echo "	--skip-patch			Skips the patching of the unpacked sources"
		echo "	--skip-build-binutils		Skips building binutils"
		echo "	--skip-build-gcc		Skips building gcc"
		echo "	--clean				Cleans everything"
		echo "	--help				Prints this help screen"
		echo
		echo "To specify a different path for your TOOLCHAIN_BASE/SYSROOT,"
		echo "copy 'variables.sh.template' to 'variables.sh' and use export"
		echo "to set the respective variables."
		echo
		exit
	else
		echo "unknown parameter: $var"
		exit
	fi
done

pushd() {
    command pushd "$@" > /dev/null
}

popd() {
    command popd "$@" > /dev/null
}


echo "Checking tools"
requireTool patch
requireTool curl
requireTool $AUTOCONF



# Check version of autoconf
echo "    $REQUIRED_AUTOCONF"
$AUTOCONF --version | grep -q "$REQUIRED_AUTOCONF"
if [[ $? != 0 ]]; then
	echo "    -> wrong autoconf version:"
	echo "       $($AUTOCONF --version | sed -n 1p)"
	exit
fi


# Clean if necessary
if [ $STEP_CLEAN == 1 ]; then
	rm -rf temp
fi


# Create temp
echo "Creating temporary work directory"
mkdir -p temp


# Download archives if necessary
if [ $STEP_DOWNLOAD == 1 ]; then

	echo "Downloading archive files"
	echo "    gcc"
	curl $GCC_ARCHIVE -o temp/gcc.tar.gz -k
	echo "    binutils"
	curl $BINUTILS_ARCHIVE -o temp/binutils.tar.gz -k
	
else
	echo "Skipping file download"
fi


# Unpack archives
if [ $STEP_UNPACK == 1 ]; then

	echo "Unpacking archives"
	tar -xf temp/gcc.tar.gz -C temp
	failOnError
	tar -xf temp/binutils.tar.gz -C temp
	failOnError
	
else
	echo "Skipping unpacking"
fi


# Apply patches
if [ $STEP_PATCH == 1 ]; then

	echo "Patching GCC"
	patch -d temp/$GCC_UNPACKED -p 1 < $GCC_PATCH				>>temp/patching.log 2>&1
	pushd temp/$GCC_UNPACKED/libstdc++-v3
	echo "Updating autoconf in libstdc++-v3"
	$AUTOCONF
	popd
	
	echo "Patching binutils"
	patch -d temp/$BINUTILS_UNPACKED -p 1 < $BINUTILS_PATCH		>>temp/patching.log 2>&1
	
else
	echo "Skipping patching"
fi


# Build tools
echo "Building 'changes' tool"
pushd tools/changes

	CC=$HOST_CXX $SH build.sh all		>>ghost-build.log 2>&1

popd


echo "Building 'ramdisk-writer' tool"
pushd tools/ramdisk-writer

	CC=$HOST_CXX $SH build.sh all		>>ghost-build.log 2>&1

popd


echo "Installing 'pkg-config' wrapper"
pushd tools/pkg-config

	$SH build.sh						>>ghost-build.log 2>&1

popd


# Install headers
echo "Installing libc and libapi headers"
pushd libc

	$SH build.sh install-headers	>>ghost-build.log 2>&1

popd

pushd libapi

	$SH build.sh install-headers	>>ghost-build.log 2>&1

popd


# Build binutils
if [ $STEP_BUILD_BINUTILS == 1 ]; then

	echo "Building binutils"
	mkdir -p temp/build-binutils
	pushd temp/build-binutils

	echo "    Configuring"
	../$BINUTILS_UNPACKED/configure --target=$TARGET --prefix=$TOOLCHAIN_BASE --disable-nls --enable-shared --disable-werror --with-sysroot=$SYSROOT >>ghost-build.log 2>&1
	failOnError

	echo "    Building"
	make all -j8						>>ghost-build.log 2>&1
	failOnError

	echo "    Installing"
	make install						>>ghost-build.log 2>&1
	failOnError

	popd

else
	echo "Skipping build of binutils"
fi


# Build gcc
if [ $STEP_BUILD_GCC == 1 ]; then

	echo "Building gcc"
	mkdir -p temp/build-gcc
	pushd temp/build-gcc
	
	echo "    Configuration"
	../$GCC_UNPACKED/configure --target=$TARGET --prefix=$TOOLCHAIN_BASE --disable-nls --enable-languages=c,c++ --enable-shared --with-sysroot=$SYSROOT $BUILD_GCC_ADDITIONAL_FLAGS >>ghost-build.log 2>&1
	failOnError

	echo "    Building core"
	make all-gcc -j8					>>ghost-build.log 2>&1
	failOnError

	echo "    Installing core"
	make install-gcc					>>ghost-build.log 2>&1
	failOnError

	popd
else
	echo "Skipping build of GCC"
fi


# Build libc static
echo "Building libc static"

	pushd libc
	$SH build.sh clean static					>>ghost-build.log 2>&1
	failOnError

popd


# Build libapi
echo "Building libapi static"

	pushd libapi
	$SH build.sh clean static					>>ghost-build.log 2>&1
	failOnError

popd


# Build libgcc
echo "Building target GCC libraries"
pushd temp/build-gcc

	echo "    Building target libgcc"
	make all-target-libgcc -j8				>>ghost-build.log 2>&1
	failOnError

	echo "    Installing target libgcc"
	make install-target-libgcc				>>ghost-build.log 2>&1
	failOnError

	echo "    Copying artifacts to system/lib"
	cp "$TOOLCHAIN_BASE/$TARGET/lib/libgcc_s.so.1" "$SYSROOT/system/lib/libgcc_s.so.1"
	failOnError

popd


# Build libc shared
echo "Building libc shared"

	pushd libc
	$SH build.sh shared					>>ghost-build.log 2>&1
	failOnError

popd


# Build libapi shared
echo "Building libapi shared"

	pushd libapi
	$SH build.sh shared					>>ghost-build.log 2>&1
	failOnError

popd


# Build libstdc++-v3
pushd temp/build-gcc

	echo "    Building libstdc++-v3"
	make all-target-libstdc++-v3 -j8		>>ghost-build.log 2>&1
	failOnError

	echo "    Installing libstdc++-v3"
	make install-target-libstdc++-v3		>>ghost-build.log 2>&1
	failOnError

popd

# TODO: Build shared libstdc++-v3
#  ../gcc-12.2.0/libstdc++-v3/configure --host=i686-ghost --prefix=/system --enable-shared
# Doesn't work yet

# Finished
echo "Toolchain successfully built"