Watermark Pod Autoscaler Controller

Disclaimer: This project is in beta - The API might change.

Overview

The Watermark Pod Autoscaler (WPA) Controller is a custom controller that extends the Horizontal Pod Autoscaler (HPA).

The features

Set high and low bounds to prevent autoscaling events.
Specify scaling velocity.
Specify windows of time to restrict upscale or downscale events.
Add delays to avoid scaling on bursts.
Different algorithms to compute the desired number of replicas.

The goal

The Watermark Pod Autoscaler Controller is an alternative controller to the upstream Horizontal Pod Autoscaler Controller.

When to use it

If you want to autoscale some of your applications, but:

The single threshold logic of the HPA is not enough.
If you need to have granular configuration for the autoscaling controller.

Usage

The algorithm

e.g.

apiVersion: datadoghq.com/v1alpha1
kind: WatermarkPodAutoscaler
[...]
spec:
  algorithm: absolute
[...]

There are two options to compute the desired number of replicas:

average The controller will use the ratio value from the external metrics provider / current number of replicas, and will compare it to the watermarks. The recommended number of replicas is value from the external metrics provider / watermark (low or high depending on the current value).

The average algorithm is a good fit if you use a metric that does not depend on the number of replicas. Typically, the number of requests received by an ELB can indicate how many webservers we want to have, given that we know that a single webserver should handle n rq/s. Adding a replica will not increase or decrease the number of requests received by the load balancer.
absolute The default value is absolute. An average metric should be used. The recommended number of replicas is computed as current number of replicas * value from the external metrics provider / watermark.

The absolute algorithm is the default, as it represents the most common use case. For example, if you want your application to run between 60% and 80% of CPU, and avg:cpu.usage is at 85%, you need to scale up. The metric has to be correlated to the number of replicas.

Note: In the upstream controller, only the math.Ceil function is used to round up the recommended number of replicas.

This means that if you have a threshold at 10, you will need to reach a utilization of 8.999... from the external metrics provider to downscale by one replica. However, a utilization of 10.001 will make you scale up by one replica.

The WPA controller will use math.Floor if the value is under the lower watermark. This ensures symmetrical behavior. Combined with other scaling options, this allows finer control over when to downscale.

Deployment

To use the Watermark Pod Autoscaler, deploy it in your Kubernetes cluster:

Download the Watermark Pod Autoscaler project zip file. Source code can be found at DataDog/watermarkpodautoscaler.
Unzip the project, and go into the ./watermarkpodautoscaler folder.
Define your namespace and Watermark Pod Autoscaler controller:
```
DD_NAMESPACE="datadog"
DD_NAMEWPA="wpacontroller"
```
Create the namespace:
```
kubectl create ns $DD_NAMESPACE
```

Install the Watermark Pod Autoscaler controller with Helm:

helm install $DD_NAMEWPA -n $DD_NAMESPACE ./chart/watermarkpodautoscaler

kubectl plugin

The WatermarkPodAutoscaler Controler comes with a kubectl plugin providing a set of helper utilities. more information on the dedicated documentation page: docs/kubectl-plugin.md

The process

Create your WPA in the same namespace as your target deployment.

The Datadog Cluster Agent will pick up the creation/update/deletion event. It parses the WPA spec to extract the metric and scope to get from Datadog.

Concrete examples

In this example, we are using the following spec configuration:

apiVersion: datadoghq.com/v1alpha1
kind: WatermarkPodAutoscaler
metadata:
  name: example-watermarkpodautoscaler
spec:
  downscaleForbiddenWindowSeconds: 60
  downscaleDelayBelowWatermarkSeconds: 300
  upscaleForbiddenWindowSeconds: 30
  upscaleDelayAboveWatermarkSeconds: 30
  scaleDownLimitFactor: 30
  scaleUpLimitFactor: 50
  minReplicas: 4
  maxReplicas: 9
  scaleTargetRef:
    kind: "Deployment"
    name: "some_app"
    apiVersion: "apps/v1"
  metrics:
  - external:
      highWatermark: 400m
      lowWatermark: 150m
      metricName: custom.request_duration.max
      metricSelector:
        matchLabels:
          kubernetes_cluster: mycluster
          service: billing
          short_image: billing-app
    type: External
  tolerance: "0.01"

Metric types

Both the External and the Resource metric types are supported. The WPA controller uses the same format as the HPA. More information here.

Bounds

Starting with the watermarks, the value of the metric collected (watermarkpodautoscaler.wpa_controller_value) from Datadog in purple when between the bounds (watermarkpodautoscaler.wpa_controller_low_watermark and watermarkpodautoscaler.wpa_controller_high_watermark) will instruct the controller not to trigger a scaling event. They are specified as Quantities, so you can use m | "" | k | M | G | T | P | E to easily represent the value you want to use.

We can use the metric watermarkpodautoscaler.wpa_controller_restricted_scaling{reason:within_bounds} to verify that it is indeed restricted. Note: the metric was multiplied by 1000 in order to make it more explicit that during this time, no scaling event could have been triggered by the controller.

Velocity

The second set of configuration options pertains to the scaling velocity of your deployment, controlled by scaleDownLimitFactor and scaleUpLimitFactor. These are integers between 0 and 100. They represent the maximum ratio of respectively downscaling and upscaling, given the current number of replicas.

In this case, should we have 10 replicas and a recommended number of replicas at 14 (see the Algorithm section for more details on the recommendation) with a scaleUpFactor of 30 (%), we would be capped at 13 replicas.

In the following graph, we can see that the suggested number of replicas (in purple), represented by the metric watermarkpodautoscaler.wpa_controller_replicas_scaling_proposal is too high compared to the current number of replicas. This will trigger the upscale capping logic, which can be monitored using the metric watermarkpodautoscaler.wpa_controller_restricted_scaling{reason:upscale_capping} (Note: Same as above, the metric was multiplied to make it more explicit). Thus, the effective number of replicas watermarkpodautoscaler.wpa_controller_replicas_scaling_effective will scale up, but according to the scaleUpLimitFactor.

In this similar example, we avoid downscaling too much, and we can use the same set of metrics to guarantee that we only scale down by a reasonable number of replicas.

It is important to note that we always make conservative scaling decisions.

With a scaleUpLimitFactor of 29%: if we have 10 replicas and are recommended 13, we will upscale to 12.
With a scaleDownLimitFactor of 29%: if we have 10 replicas and are recommended 7, we will downscale to 8.
The minimum number of replicas we can recommend to add or remove is one (not zero). This is to avoid edge scenarios when using a small number of replicas.
Note that the options minReplicas and maxReplicas take precedence. Refer to the Precedence section.

Cooldown periods

Finally, the last options available are downscaleForbiddenWindowSeconds and upscaleForbiddenWindowSeconds . These represent how much time (in seconds) after a scaling event to wait before scaling down and scaling up, respectively. We only keep the last scaling event, and we do not compare the upscaleForbiddenWindowSeconds to the last time we only upscaled.

In the following example, we can see that the recommended number of replicas is ignored if we are in a cooldown period. The downscale cooldown period can be visualized with watermarkpodautoscaler.wpa_controller_transition_countdown{transition:downscale}, and is represented in yellow on the graph below. We can see that it is significantly higher than the upscale cooldown period (transition:upscale) in orange on our graph. Once we are recommended to scale, we will only scale if the appropriate cooldown window is over. This will reset both countdowns.

Scaling Delay

In order to avoid scaling from bursts you can use the following features: downscaleDelayBelowWatermarkSeconds and/or upscaleDelayAboveWatermarkSeconds. These options are specified as integers. The metric(s) have to remain above or under its/their respective watermark for the configured duration. You can keep track of how much time is left in the status of the WPA:

  - lastTransitionTime: "2022-11-15T02:02:09Z"
    message: Allow downscaling if the value stays under the Watermark
    reason: Value below Low Watermark
    status: "False"
    type: BelowLowWatermark

Or in the logs of the controller:

{"level":"info","ts":1668481092517.446,"logger":"controllers.WatermarkPodAutoscaler","msg":"Will not scale: value has not been out of bounds for long enough","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","time_left":3209}

Note: If you are using multiple metrics with this feature, the above/below condition is considered using the OR of the metrics.

For example, suppose you have a 60 second upscaleDelay with two metrics, M1 and M2. If M1 stays above its high watermark for 40 seconds [t0; t40], and the M2 one goes above its high watermark for 30 seconds, overlapping with M1 during its last 10 seconds, [t30; t60], this validates the upscaleDelay condition and allows for an upscaling event.

Precedence

As we retrieve the value of the external metric, we will first compare it to the sum highWatermark + tolerance and to the difference lowWatermark - tolerance. If we are outside of the bounds, we compute the recommended number of replicas. We then compare this value to the current number of replicas to potentially cap the recommended number of replicas also according to minReplicas and maxReplicas. Finally, we look at if we are allowed to scale, given the downscaleForbiddenWindowSeconds and upscaleForbiddenWindowSeconds.

Pod Lifecycle

In order to have more granular control over the conditions under which a target can be scaled, you can use the following features:

minAvailableReplicaPercentage: Indicates the minimum percentage of replicas that need to be available in order for the controller to autoscale the target. For instance, if set at 50 and less than half of the pods behind the target are in an Available state, the target will not be scaled by the controller.
readinessDelaySeconds: Specifies how much time replicas need to be running for, prior to be taken into account in the scaling decisions.

Simulation

If all the conditions are met, the controller will scale the targeted object in scaleTargetRef to the recommended number of replicas only if the dryRun flag is not set to true. It will indicate this by logging:

{"level":"info","ts":1566327479.866722,"logger":"wpa_controller","msg":"DryRun mode: scaling change was inhibited currentReplicas:8 desiredReplicas:12"}

Limitations

Only officially supports one metric per WPA. While the logic supports multiple metrics and applies the greatest recommendation of all metrics, the status needs some refactoring to reflect this insight.
Does not take CPU into account to normalize the number of replicas.

Troubleshooting

On the Datadog Cluster Agent side

The Cluster Agent is running an informer against the WPA resources, and similar to the HPA, upon creation/update/deletion will parse the spec to query the metric from Datadog.

The Cluster Agent doesn't run the WPA listener by default. To enable WPA in the Cluster Agent, set the environment variable DD_EXTERNAL_METRICS_PROVIDER_WPA_CONTROLLER=true and update the ClusterRole assigned to the Cluster Agent Service Account to have access to WatermarkPodAutoscaler objects:

[...]
- apiGroups: ["datadoghq.com"]
  resources:
  - watermarkpodautoscalers
  verbs:
  - get
  - list
  - watch
[...]

Note: To enable WPA in the Cluster Agent using the datadog helm chart, set clusterAgent.metricsProvider.wpaController to true. The ClusterRole will be updated automatically.

Once you have applied those changes and created a WPA object, if you exec in the Datadog Cluster Agent pod and run agent status you will be able to see more specific details about the spec of the autoscalers that were parsed (whether it's a horizontal or a watermark pod autoscaler).

  * watermark pod autoscaler: default/example2-watermarkpodautoscaler
    - name: example2-watermarkpodautoscaler
    - namespace: default
    - type: watermark
    - uid: ff09b7d8-d99b-11e9-a8c1-42010a8001c4
    Metric name: sinus
    Labels:
    - foo: bar
    Value: 75.1297378540039
    Timestamp: 15688259400
    Valid: true

  * horizontal pod autoscaler: default/nginxext
    - name: nginxext
    - namespace: default
    - type: horizontal
    - uid: 61ef3f6e-af32-11e9-a8c1-42010a8001c4
    Metric name: docker.mem.rss
    Labels:
    - cluster-location: us-central1-a
    - cluster-name: charly
    Value: 263888700952
    Timestamp: 15688259400
    Valid: true

Lifecycle of the controller

In addition to the metrics mentioned above, these are logs that will help you better understand the proper functioning of the WPA.

Every 15 seconds, we retrieve the metric listed in the metrics section of the spec from Datadog.

{"level":"info","ts":1668484420515.7678,"logger":"controllers.WatermarkPodAutoscaler","msg":"Metrics from the External Metrics Provider","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","metrics":[33959]}
{"level":"info","ts":1668484420515.8203,"logger":"controllers.WatermarkPodAutoscaler","msg":"Value is below lowMark","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","usage":"33959m","replicaCount":7,"currentReadyReplicas":8,"tolerance (%)":1,"adjustedLM":34650,"adjustedUsage":33959}
{"level":"info","ts":1668484420515.8906,"logger":"controllers.WatermarkPodAutoscaler","msg":"Proposing replicas","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","proposedReplicas":7,"metricName":"datadogmetric@datadog:example-watermarkpodautoscaler-utilization-metric{map[kube_container_name:my-container service:my-target]}","reference":"Deployment/datadog/example-watermarkpodautoscaler","metric timestamp":"Tue, 15 Nov 2022 03:53:20 UTC"}
{"level":"info","ts":1668484420515.9324,"logger":"controllers.WatermarkPodAutoscaler","msg":"Normalized Desired replicas","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","desiredReplicas":7}
{"level":"info","ts":1668484420515.946,"logger":"controllers.WatermarkPodAutoscaler","msg":"Cooldown status","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","backoffUp":false,"backoffDown":false,"desiredReplicas":7,"currentReplicas":8}
{"level":"info","ts":1668484420515.9563,"logger":"controllers.WatermarkPodAutoscaler","msg":"Will not scale: value has not been out of bounds for long enough","watermarkpodautoscaler":"datadog/example-watermarkpodautoscaler","wpa_name":"example-watermarkpodautoscaler","wpa_namespace":"datadog","time_left":2335}

Here, the current number of replicas seen in the target deployment is six. We then see the raw value retrieved from the External Metrics Provider, and we compare it to the high and low watermarks. Given the result of this comparison, we print the recommended number of replicas. In this case, it is five.

If you want to query the External Metrics Provider directly, you can use the following command:

kubectl get --raw "/apis/external.metrics.k8s.io/v1beta1/namespaces/<namespace of your deployment>/<name of the metrics>" | jq .

You can optionally add label selectors too by adding ?labelSelector=key%3Dvalue. If we wanted to retrieve our metric in this case, we could use:

kubectl get --raw "/apis/external.metrics.k8s.io/v1beta1/namespaces/<namespace of your deployment>/<name of the metrics>?labelSelector=key%3Dvalue%2Cotherkey%3Dothervalue%2Cshort_image%3Dimage" | jq .

If you see logs such as:

{"level":"info","ts":1566397216.8918724,"logger":"wpa_controller","msg":"failed to compute desired number of replicas based on listed metrics for Deployment/datadog/propjoe-green: failed to get external metric dd.propjoe.request_duration.max: unable to get external metric datadog/propjoe-green/&LabelSelector{MatchLabels:map[string]string{fooa: bar,},MatchExpressions:[],}: no metrics returned from external metrics API"}

Then you can verify that this metric is indeed not available from the External Metrics Provider. This could be because of a typo in the labels, or the metric can't be fetched from Datadog (which could be due to various factors: too sparse, API down, rate limit hit, etc.). You can look through the External Metrics Provider logs for further investigation.

We then verify the scaling velocity capping and the cooldown windows. In the case of a scaling capping, you would see something like:

{"level":"info","ts":1566327268.8839815,"logger":"wpa_controller","msg":"Upscaling rate higher than limit of 50.0% up to 9 replicas. Capping the maximum upscale to 9 replicas"}
{"level":"info","ts":1566327268.884001,"logger":"wpa_controller","msg":"Returning 9 replicas, condition: ScaleUpLimit reason the desired replica count is increasing faster than the maximum scale rate"}
{"level":"info","ts":1566327479.8845513,"logger":"wpa_controller","msg":" -> after normalization: 9"}

Then we consider the cooldown periods. You will have logs indicative of when the last scaling event was, as well as when the next upscale and downscale events are forbidden until:

{"level":"info","ts":1566327479.8845847,"logger":"wpa_controller","msg":"Too early to downscale. Last scale was at 2019-08-20 18:57:44 +0000 UTC, next downscale will be at 2019-08-20 18:58:44 +0000 UTC, last metrics timestamp: 2019-08-20 18:57:59 +0000 UTC"}
{"level":"info","ts":1566327479.8846018,"logger":"wpa_controller","msg":"Too early to upscale. Last scale was at 2019-08-20 18:57:44 +0000 UTC, next upscale will be at 2019-08-20 18:58:14 +0000 UTC, last metrics timestamp: 2019-08-20 18:57:59 +0000 UTC"}
{"level":"info","ts":1566327479.884608,"logger":"wpa_controller","msg":"backoffUp: true, backoffDown: true, desiredReplicas 5, currentReplicas: 6"}

Finally, we have verification that the deployment was correctly autoscaled:

{"level":"info","ts":1566327253.7887673,"logger":"wpa_controller","msg":"Successful rescale of watermarkpodautoscaler, old size: 8, new size: 9, reason: cutom_metric.max{map[kubernetes_cluster:my-cluster service:my-service short_image:my-image]} above target"}

Extra options

You can use the annotation wpa.datadoghq.com/logs-attributes to add extra key values in the logs associated with the underlying WPA object. Example:

apiVersion: datadoghq.com/v1alpha1
kind: WatermarkPodAutoscaler
metadata:
  annotations:
    wpa.datadoghq.com/logs-attributes: '{"mywpa": "isgreat"}'
  name: watermarkpodautoscaler-sinus
  namespace: default
  [...]

Will yield:

{"level":"info","ts":1643642642091.062,"logger":"controllers.WatermarkPodAutoscaler","msg":"getReadyPodsCount","watermarkpodautoscaler":"default/watermarkpodautoscaler-sinus","mywpa":"isgreat","full podList length":2,"toleratedAsReadyPodCount":2,"incorrectly targeted pods":0}

FAQ

What happens if I scale manually my deployment?

In the next reconcile loop, the new number of replicas will be considered to compute the desired number of replicas. You might see a log saying that the resource was modified by someone else. If the number of replicas configured is outside of the bounds, however, the controller will scale this back to a number of replicas within the acceptable range.
How to disable temporarily the WPA to manually scale up/down my deployment?

The recommended way is to set the WPA in dry run mode and then scale to the desired number of replicas. You can set the WPA in dry run using this patch command:
```
kubectl patch wpa <wpa-name> --type='json' -p='[{"op": "replace", "path": "/spec/dryRun", "value":true}]'
```
Don't forget to set back the dry run mode to false once your temporary override is over so that the WPA is active again.
What is the footprint of the controller?

From our testing, it is a factor of the number of deployments in the cluster.
- 500+ deployments, 1GB - 30mCores
- 1000+ deployments, 2.3GB - 100mCores Note: When the API server restarts, the controller runtime caches the old state and the new one for a second and then merges everything. This makes the memory usage shoot up and can OOM the controller.
Is the controller stateless?

Yes.
Does WPA support multiple metrics?

Yes, WPA can scale on multiple metrics and works similar to HPA. WPA evaluates each metric separately and proposes the number of replicas associated with the metric that requires the largest number. For example, if WPA evaluates metric1, metric2, metric3, and for each it calculates 10, 20, 30 replica proposals respectively, the final proposal is 30.

RBAC

Since we watch all the WPA definitions cluster wide, we use a clusterrole.

A useful option is to impersonate the user to verify rights. For instance, to verify that you have the right to get a deployment as the WPA controller's service account:

kubectl get deploy <your_deploy>  --as system:serviceaccount:datadog:watermarkpodautoscaler -n <your_ns>

Or, query the External Metrics Provider:

kubectl get --raw "/apis/external.metrics.k8s.io/v1beta1/namespaces/<your_ns>/metric --as system:serviceaccount:<your_ns>:watermarkpodautoscaler

Developer guide

Setup your dev environment

Requirements:

golang >= 1.18
make
docker
git

After cloning the repository https://github.com/DataDog/watermarkpodautoscaler, set some environment variables:

export GO111MODULE=on
unset GOPATH
export PATH=$PATH:$(pwd)/bin

Then, to install some tooling dependencies, run make install-tools.

Useful commands

make install-tools: Install the tooling to use the operator SDK.
make build: Build the controller locally.
make generate: Run the several operator SDK generator, which generates code for the controller and the informer's registration.
make test: Run unit tests.
make validate: Run common Golang linters (golangci-lint).
make e2e: Run end-to-end tests on the current configured Kubernetes cluster.
make container: Build the controller Docker image using the operator SDK.
make container-ci: Build the controller Docker image with the multi-stage Dockerfile.

Releasing

The release process documentation is available here.

Acknowledgements

Some of the features were inspired by the Configurable HPA or CHPA. Most of the code structure was also used for the Watermark Pod Autoscaler, although the overall packaging of the CRD was done with the operator SDK.

License

MorningSong/watermarkpodautoscaler

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages