markdown-body entry-content container-lg" itemprop="text">

This project is no longer actively developed or maintained.

Dart Test Runner

The Dart Test Runner (DTR) is a command line Test Runner for Dart test files. DTR will automatically detect and run all the tests in your Dart project in the correct environment (VM or Browser).

Installation and usage

DTR is available for download on the Pub Package Manager

To install DTR use this command:

pub global activate test_runner

To run DTR use this command from within the root of your Dart project:

pub global run test_runner

Alternatively you can add the pub cache bin directory to your PATH: ~/.pub-cache/bin. Then you will be able to simply use (-c gives a nice colored output):

run_tests -c

For a list of options and to learn more use:

run_tests --help

Result

Here is an example of output from the Dart test runner:

bash> run_tests

Checking Dart binaries...
Dart binaries OK.

Looking for Dart project in "./"...
Found project "test-runner".

Looking for test suites...
Found 5 test suites (3 Standalone VM, 2 Dartium).

Checking browser binaries...
Browser binaries OK.

Running all tests...
Test suite passed: /vm_ok_test.dart
Test suite passed: /subdir/vm_in_subdir_ok_test.dart
Test suite failed: /vm_fail_test.dart
Detailed results of test suite vm_fail_test.dart:
┌────────────────────────────────────────────────
│ FAIL: QuickSort
│   Expected: equals [1, 2, 3, 4, 5] ordered
│     Actual: [3, 5, 2, 4, 1]
│      Which: was <3> instead of <1> at location [0]
│   ...
│ FAIL: Partition
│   Expected: <1>
│     Actual: <0>
│   ...
│ 0 PASSED, 2 FAILED, 0 ERRORS
└────────────────────────────────────────────────
Test suite passed: /browser_ok_test.dart
Test suite passed: /browser_ok_with_html_test.dart

Summary: 1 TEST SUITE(S) FAILED. 4 TEST SUITE(S) PASSED.

TIP: use the -c option to get a nice colored output

The exit code will be:

If all tests passed: 0
If at least one test has failed: 1
Incorrect command line argument (e.g. missing pub or dart2js, incorrect project path...): 2
If no test files were found in the project: 3

Test files detection and conventions

Your tests have to follow certain conventions to be reliably detected by DTR. Please make sure that:

Your tests files are suffixed with _test.dart
Each test file contains a main() that runs all your unit tests.

Depending on the environment into which your test runs there are additional requirements listed below.

Each test file is considered a "test suite". If a test suites does not complete in 240 seconds it is aborted.

Standalone VM tests

Standalone VM tests are tests that can be run from the command line using 'dart'. The executable of the test needs to return an exit code of 0 if all tests were successful and 1 or more if there was an error.

NOTE: Typically if you wrote your Standalone VM tests using the unittest package you should be all set.

Browser tests

Browser tests are tests that need to be ran in a browser environment such as dartium.

Browser tests will be executed in a headless version of Chromium for Dart called Content Shell. Content Shell is not the same thing as Dartium. If you don't have Content Shell installed read the specific section about it.

If all tests have passed your test needs to print PASS\n ("PASS" followed by a line break).

You can provide an HTML file for a Browser Test. The HTML file needs to have the same base name (for my_test.dart use my_test.html).

You don't have to write an HTML file associated to your browser tests. The Dart test runner will automatically use a default HTML file and run your Browser tests in it if you didn't provide a custom one.

DTR will automatically detect if a test file needs to be ran inside a Browser if there is no associated HTML file.

NOTE: Typically if you wrote browser tests using the unittest package you should be all set as the Dart test runner will automatically and transparently set an appropriate test Configuration and will import packages/unittest/test_controller.js into the HTML page.

Tools and environment

DTR runs on Linux, Mac OS X and Windows. DTR also needs the following tools installed:

Content Shell: A headless version of Dartium. Needed to run browser tests. Not the same thing as Dartium. Make sure you read the specific section about it
Dart SDK: Especially the pub command which will be used to run and serve tests and dart2js which is used to detect browser tests.

Ideally make sure that these tools are available in your PATH as pub, dart2js and content_shell (with a .bat or .exe extension in Windows). You can also specify the path to these tools executables with --content-shell-bin, --pub-bin and --dart2js-bin.

Content Shell

Content Shell is a stripped down version of Dartium/Chromium and it has the ability to run headlessly. This is not the same thing as Dartium and if you haven't already you likely need to install it.

For step-by=step instructions on how to install Content Shell on different operating systems read CONTENT_SHELL_INSTALL_INSTRUCTIONS.md.

Options and examples

Usage

Generic usage of DTR:

run_tests [options] [<project-or-tests>...]

Where <project-or-tests> is the path to the project root/test folder or a list of path to individual test files to run. If omitted all tests of the current project will be discovered and ran.

Options

--content-shell-bin: Path to the Content Shell executable. If omitted "content_shell" from env is used.

--pub-bin: Path to the Pub executable. If omitted "pub" from env is used.

--dart-bin: Path to the Dart executable. If omitted "dart" from env is used.

--dart2js-bin: Path to the dart2js executable. If omitted "dart2js" from env is used.

--skip-browser-tests: Skips all browser tests. Useful when browser binaries like content_shell are not available.

--max-processes: Maximum number of processes that will run in parallel. Defaults to "auto" which depends on the number of processors available. Otherwise an integer is expected.

--disable-ansi: Disables the special ANSI character used in the console output for things like dynamic line updating and color. This is activated automatically on Windows.

-c or --color: Prints the output in color in a shell.

-v or --verbose: Prints all tests results instead of just the summary.

-h or --help: Print usage information.

Examples

Runs all unit tests of the project in the current directory with a colored output:

run_tests -c

Runs the specified two unit test files:

run_tests test/my_first_test.dart test/my_second_test.dart

Runs all unit tests of the Dart project located at ~/my_project/:

run_tests ~/my_project/

Runs all tests of the project located at ~/my_project/ and use ~/dartium/content_hell as the Dartium executable.

run_tests --content-shell-bin ~/dartium/content_shell ~/my_project/

Test using Docker

The test environment can sometimes be tricky to setup (for instance Content Shell in Linux). As an alternative we are providing a Docker image that can be used to run your tests. There are also options to automatically run tests of Pub packages or GitHub repos.

For more details read docker/README.

License

BSD 3-Clause License. See LICENSE file.

License

googlearchive/test_runner.dart

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Contributors 5

Uh oh!

Languages

Error
Looks like something went wrong!

Packages