中兴ZXV10 B860AV2.1-A除WIFI和蓝牙外其他正常。

[chikungfu]

Device Information | 设备信息

• SOC: [S905l2]
• Model: [B860AV2.1-A]

Armbian Version | 系统版本

• Kernel Version: [6.12.23-ophub]
• Release: [Armbian_25.05.0_amlogic_s905l2_noble_6.12.23_server_2025.04.15.img.gz]

Describe the bug | 问题描述
All issues will only remain open for one week to prioritize resolving them.
After that period, they will be closed but can still continue to be discussed in the thread.
所有的问题都只保留一周的开启状态供重点关注解决，超时将关闭，但仍然可以长期继续跟帖讨论。

Please provide a detailed description of the issue and, if necessary, attach a screenshot.
详细描述问题，并在必要时附上屏幕截图。

开始刷入的是安卓6.0 ROOT线刷固件，卡切后不启动。
后用Amlogic USB Burning Tool v2.2刷入以下android_tv_mgv2000-s905l2-android4.4.2-root.tar.xz底包，使用rufus写入闪迪cz33 16g u盘，extlinux.cfg.bak文件去bak，换meson-gxl-s905l2-x7-5g.dtb文件后显示emmc，不换不显示emmc，卡切系统正常，双USB，HDMI显示正常，百兆网口正常，没有WIFI和蓝牙。
android_tv_mgv2000-s905l2-android4.4.2-root.tar.xz

后来想着看看线刷如TF卡后armbian可以使用不？tf修改文件和cz33一样，提示如下错误，请大佬看看是什么原因，使用tf卡还是比u盘方便一些。

再按cz33 u盘制作了一个杂牌8g u盘，显示如下错误。

u盘启动后用armbian-install，选119，写入emmc后正常启动，双USB，HDMI显示正常，百兆网口正常，没有WIFI和蓝牙。

没有拆机，附inxi检测参数。
root@armbian:~# inxi -F
System:
Host: armbian Kernel: 6.12.23-ophub arch: aarch64 bits: 64
Console: pty pts/0 Distro: Ubuntu 24.04 LTS (Noble Numbat)
Machine:
Type: ARM System: Amlogic Meson GXL (S905L2) X7 5G Tv Box details: N/A
CPU:
Info: quad core model: ARMv8 v8l variant: cortex-a53 bits: 64 type: MCP
Speed (MHz): avg: 1000 min/max: 100/2016 cores: 1: 1000 2: 1000 3: 1000 4: 1000
Graphics:
Device-1: meson-gxl-dw-hdmi driver: meson_dw_hdmi v: N/A
Device-2: meson-gxl-vpu driver: meson_drm v: N/A
Device-3: meson-gxl-mali driver: lima v: kernel
Display: server: No display server data found. Headless machine? tty: 150x41
resolution: 1280x720
API: N/A Message: No API data available in console. Headless machine?
Audio:
Device-1: meson-gxl-dw-hdmi driver: meson_dw_hdmi
Device-2: gx-sound-card driver: gx_sound_card
API: ALSA v: k6.12.23-ophub status: kernel-api
Network:
Device-1: meson-gxbb-dwmac driver: meson8b_dwmac
IF: eth0 state: up speed: 100 Mbps duplex: full mac: ea:78:f4:31:6d:31
Device-2: ethernet-phy-id0181.4400 driver: Meson GXL Internal PHY
Device-3: pwm-clock driver: pwm_clock
IF-ID-1: ip6tnl0 state: down mac: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
IF-ID-2: sit0 state: down mac: 00:00:00:00
Drives:
Local Storage: total: 14.71 GiB used: 2.08 GiB (14.1%)
ID-1: /dev/sda vendor: SanDisk model: Cruzer Fit size: 14.71 GiB type: USB
Partition:
ID-1: / size: 13.9 GiB used: 1.92 GiB (13.8%) fs: ext4 dev: /dev/sda2
ID-2: /boot size: 510 MiB used: 162.4 MiB (31.8%) fs: vfat dev: /dev/sda1
ID-3: /var/log size: 46.8 MiB used: 1.1 MiB (2.3%) fs: ext4 dev: /dev/zram1
Swap:
ID-1: swap-1 type: zram size: 453.6 MiB used: 0 KiB (0.0%) dev: /dev/zram0
Sensors:
Src: /sys Message: No sensor data found in /sys/class/hwmon.
Info:
Memory: total: 1024 MiB available: 907.1 MiB used: 258.3 MiB (28.5%)
Processes: 141 Uptime: 4m Init: systemd target: graphical (5) Shell: Bash inxi: 3.3.34