Cinder Docker Driver

Docker Volume Plugin to enable consumption of OpenStack-Cinder Block Storage with containers.

Install

Build From Source

Obviously you'll need to have a golang dev environment setup, one piece of that includes the golang dep tool. You can find install instructions and usage info here: https://github.com/golang/dep

For the most part just installing the tool is good enough, the Makefile will take care of it's usage for you.

git clone https://github.com/j-griffith/cinder-docker-driver
cd cinder-docker-driver
make clean; make
sudo ./install.sh

NOTE the specification of the source argument to the install script, this will result in the install script copying your locally built binary (./_bin/cdd) into the install directory and creating the systemd file.

Omitting the source arg (or providing any other argument) will instruct the installer to pull the latest release from github and installing it instead.

Just the bits

Use curl to download and run the install script in the package Github repo::

curl -sSl https://raw.githubusercontent.com/j-griffith/cinder-docker-driver/master/install.sh | sudo sh

Configuration options

Example config.json file:

{
  "Endpoint": "http://172.16.140.145:5000/v2.0",
  "Username": "Fred",
  "Password": "FredsPassWord",
  "TenantID": "979ddb6183834b9993954ca6de518c5a",
  "Region": "RegionOne"
}

V3 Endpoints work as well, but we require one additional piece of information (DomainName). If you specify a V3 endpoint, and no DomainName in your config, the driver will attempt to auth with a DomainName = "Default", if your DomainName is set to something other than this though, you'll need to specify it in your config file. Here's an example of a V3 config:

{
  "Endpoint": "http://172.16.140.145/identity/v3",
  "Username": "Fred",
  "Password": "FredsPassWord",
  "TenantID": "979ddb6183834b9993954ca6de518c5a",
  "Region": "RegionOne"
  "DomainName": "MyAuthDomain",
}

Minimal/Required Config

Configuration options are stored in json format in config.json, the minimum required options provide just enough info to connect to our Cinder API and execute commands. Note that for quick demos and just trying things out you can use the default interface and network for your iSCSI connections, it's highly recommended however you don't do this if you want to do anything that might require some performance.

Endpoint
Username
Password
TenantID

Additonal/Optional Config

DefaultVolSz (1 GiB)
MountPoint (/var/lib/cinder/mount)
InitiatorIFace (default)
HostUUID (root disk UUID)
InitiatorIP (default interface IP)
Region (defaults to "RegionOne")

Example config with additional options:

{
  "Endpoint": "http://172.16.140.145:5000/v2.0",
  "Username": "Fred",
  "Password": "FredsPassWord",
  "TenantID": "979ddb6183834b9993954ca6de518c5a",
  "DefaultVolSz": 1,
  "MountPoint": "/mnt/cvols",
  "InitiatorIFace": "/dev/eth4",
  "HostUUID": "219b0670-a214-4281-8424-5bb3be109ddd",
  "InitiatorIP": "192.168.4.201"
}

Start the daemon

If you want to just launch the driver daemon as root (or sudo):

sudo ./_bin/cdd >> /var/log/cdd.out 2>&1 &'
sudo service docker restart

Using systemd

The install script includes creation of a systemd service file. If you used the install script you can just add your config file and use service cdd start.

Otherwise, you can inspect the install.sh script and create/setup your own systemd service file.

Try it out

Assuming your credentials were all set correctly and the driver was able to start up without any issues, you should be ready to go.

To get a list of commands offered via the Docker Volume API:

$ docker volume --help

Usage: 	docker volume COMMAND

Manage Docker volumes

Options:
      --help   Print usage

Commands:
  create      Create a volume
  inspect     Display detailed information on one or more volumes
  ls          List volumes
  rm          Remove a volume

Run 'docker volume COMMAND --help' for more information on a command.

To create a volume and specify some options like size and Cinder Type:

$ docker volume create -d cinder --name fredsFirstDVol -o size=10 -o type=lvm-1

You can also just add the volume arguments to your docker run command and Docker will make the create calls for you. Keep in mind that if the volume already exists we'll just grab it and try to attach it, if it doesn't, the Docker service will issue a request to the driver to create it.

What's next

Put the whole thing in a container, and just run it from there. Almost there, just trying to figure out some details on how to use iscsid in a container and have it effect the host.

License

till/cinder-docker-driver

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages