NMController_web - Web Group Controller in your LAN

Description

NMController is designed for the devices:

• NMMiner version v0.3.01 or higher
• NMAxe , which will coming soon.

The NMController will listen the UDP Broadcast in Port: 12345, any devices can be recognized on this channel according to the specified JSON format.

{
    "IP": "192.168.1.101",
    "BoardType": "NMLotto",
    "HashRate": "113.13K",
    "Share": "1/138",
    "NetDiff": "89.47T",
    "PoolDiff": "0.001",
    "LastDiff": "0.001",
    "BestDiff": "4.021M",
    "Valid": 0,
    "Progress": 0.167,
    "Temp": 48.5,
    "RSSI": -62,
    "FreeHeap": 8203.9,
    "Uptime": "000d 01:23:46",
    "Version": "v0.3.01"
}

Features

The NMController Web is developed based on python, the Flask Framework.

Install

Be sure your system installed the python3, the develop version is Python 3.11.

Install the requirements.

pip install -r requirements.txt

Note: If you just want a software installed on your computer, you can get the NMController Windows Desktop Version.

Running

python nmcontroller.py

The Web NMController will run on your local ip, port 7877. Enter the "http://127.0.0.1:7877" in the browser to access.

The Web Controller runs like this:

The page will refresh every 5 seconds.

Currently, the monitor will display the following information:

• IP
• HashRate
• Share info
• Net difficulty
• Last difficulty
• Best difficulty
• Valid number of blocks mined
• Device temp (℃)
• Wifi RSSI (dBm)
• Device free heap (KB)
• Uptime
• Last seen/updated

Contact

• Anything do not work as your expectation, just let us know.

Email	Telegram
nmminer1024@gmail.com	https://t.me/NMMiner

Contributors

Thank you to everyone who has contributed to this project! Special thanks to:

• dWiGhT (https://github.com/dwightmulcahy) - Thank you for your valuable contributions and continued support!