nxplayer.h

/****************************************************************************
 * apps/include/system/nxplayer.h
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

#ifndef __APPS_INCLUDE_SYSTEM_NXPLAYER_H
#define __APPS_INCLUDE_SYSTEM_NXPLAYER_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <mqueue.h>
#include <pthread.h>
#include <semaphore.h>

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/****************************************************************************
 * Public Type Declarations
 ****************************************************************************/

/* This structure describes the internal state of the NxPlayer */

struct nxplayer_s
{
  int         state;                       /* Current player state */
  int         dev_fd;                      /* File descriptor of active device */
  mqd_t       mq;                          /* Message queue for the playthread */
  char        mqname[16];                  /* Name of our message queue */
  pthread_t   play_id;                     /* Thread ID of the playthread */
  int         crefs;                       /* Number of references to the player */
  sem_t       sem;                         /* Thread sync semaphore */
  int         fd;                          /* File descriptor of open file */
#ifdef CONFIG_NXPLAYER_INCLUDE_PREFERRED_DEVICE
  char        prefdevice[CONFIG_NAME_MAX]; /* Preferred audio device */
  int         prefformat;                  /* Formats supported by preferred device */
  int         preftype;                    /* Types supported by preferred device */
#endif
#ifdef CONFIG_NXPLAYER_INCLUDE_MEDIADIR
  char        mediadir[CONFIG_NAME_MAX];   /* Root media directory where media is located */
#endif
#ifdef CONFIG_AUDIO_MULTI_SESSION
  FAR void    *session;       /* Session assignment from device */
#endif
#ifndef CONFIG_AUDIO_EXCLUDE_VOLUME
  uint16_t    volume;         /* Volume as a whole percentage (0-100) */
#ifndef CONFIG_AUDIO_EXCLUDE_BALANCE
  uint16_t    balance;        /* Balance as a whole % (0=left off, 100=right off) */
#endif
#endif
#ifndef CONFIG_AUDIO_EXCLUDE_TONE
  uint16_t    treble;         /* Treble as a whole % */
  uint16_t    bass;           /* Bass as a whole % */
#endif
};

typedef int (*nxplayer_func)(FAR struct nxplayer_s *pplayer, char *pargs);

/****************************************************************************
 * Public Data
 ****************************************************************************/

#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

/****************************************************************************
 * Name: nxplayer_create
 *
 *   Allocates and Initializes a NxPlayer context that is passed to all
 *   nxplayer routines.  The player MUST be destroyed using the
 *   nxplayer_destroy() routine since the context is reference counted.
 *   The context can be used in a mode where the caller creates the
 *   context, starts a file playing, and then forgets about the context
 *   and it will self free.  This is because the nxplayer_playfile
 *   will also create a reference to the context, so the client calling
 *   nxplayer_destroy() won't actually de-allocate anything.  The freeing
 *   will occur after the playthread has completed.
 *
 *   Alternately, the caller can create the object and hold on to it, then
 *   the context will persist until the original creator destroys it.
 *
 * Input Parameters:    None
 *
 * Returned Value:
 *   Pointer to created NxPlayer context or NULL if error.
 *
 ****************************************************************************/

FAR struct nxplayer_s *nxplayer_create(void);

/****************************************************************************
 * Name: nxplayer_release
 *
 *   Reduces the reference count to the player and if it reaches zero,
 *   frees all memory used by the context.
 *
 * Input Parameters:
 *   pplayer    Pointer to the NxPlayer context
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

void nxplayer_release(FAR struct nxplayer_s *pplayer);

/****************************************************************************
 * Name: nxplayer_reference
 *
 *   Increments the reference count to the player.
 *
 * Input Parameters:
 *   pplayer    Pointer to the NxPlayer context
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

void nxplayer_reference(FAR struct nxplayer_s *pplayer);

/****************************************************************************
 * Name: nxplayer_setdevice
 *
 *   Sets the preferred Audio device to use with the instance of the
 *   nxplayer.  Without a preferred device set, the nxplayer will search
 *   the audio subsystem to find a suitable device depending on the
 *   type of audio operation requested (i.e. an MP3 decoder device when
 *   playing an MP3 file, a WAV decoder device for a WAV file, etc.).
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   device    - Pointer to pathname of the preferred device
 *
 * Returned Value:
 *   OK if context initialized successfully, error code otherwise.
 *
 ****************************************************************************/

int nxplayer_setdevice(FAR struct nxplayer_s *pplayer,
                       FAR const char *device);

/****************************************************************************
 * Name: nxplayer_playfile
 *
 *   Plays the specified media file (from the filesystem) using the
 *   Audio system.  If a preferred device has been set, that device
 *   will be used for the playback, otherwise the first suitable device
 *   found in the /dev/audio directory will be used.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   filename  - Pointer to pathname of the file to play
 *   filefmt   - Format of audio in filename if known, AUDIO_FMT_UNDEF
 *               to let nxplayer_playfile() determine automatically.
 *   subfmt    - Sub-Format of audio in filename if known, AUDIO_FMT_UNDEF
 *               to let nxplayer_playfile() determine automatically.
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

int nxplayer_playfile(FAR struct nxplayer_s *pplayer,
                      FAR const char *filename, int filefmt, int subfmt);

/****************************************************************************
 * Name: nxplayer_playraw
 *
 *   Plays the specified media file (from the filesystem) using the
 *   Audio system.  If a preferred device has been set, that device
 *   will be used for the playback, otherwise the first suitable device
 *   found in the /dev/audio directory will be used.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   filename  - Pointer to pathname of the file to play
 *   nchannels  channel num
 *   bpsampe    bit width
 *   samprate   sample rate
 *   chmap      channel map
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

int nxplayer_playraw(FAR struct nxplayer_s *pplayer,
                     FAR const char *filename, uint8_t nchannels,
                     uint8_t bpsamp, uint32_t samprate, uint8_t chmap);

/****************************************************************************
 * Name: nxplayer_stop
 *
 *   Stops current playback.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_STOP
int nxplayer_stop(FAR struct nxplayer_s *pplayer);
#endif

/****************************************************************************
 * Name: nxplayer_pause
 *
 *   Pauses current playback.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME
int nxplayer_pause(FAR struct nxplayer_s *pplayer);
#endif

/****************************************************************************
 * Name: nxplayer_resume
 *
 *   Resumes current playback.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME
int nxplayer_resume(FAR struct nxplayer_s *pplayer);
#endif

/****************************************************************************
 * Name: nxplayer_fforward
 *
 *   Selects to fast forward in the audio data stream.  The fast forward
 *   operation can be cancelled by simply selected no sub-sampling with
 *   the AUDIO_SUBSAMPLE_NONE argument returning to normal 1x forward play.
 *
 *   The preferred way to cancel a fast forward operation is via
 *   nxplayer_cancel_motion() that provides the option to also return to
 *   paused, non-playing state.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   subsample - Identifies the fast forward rate (in terms of sub-sampling,
 *               but does not explicitly require sub-sampling).  See
 *               AUDIO_SUBSAMPLE_* definitions.
 *
 * Returned Value:
 *   OK if fast forward operation successful.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_FFORWARD
int nxplayer_fforward(FAR struct nxplayer_s *pplayer, uint8_t subsample);
#endif

/****************************************************************************
 * Name: nxplayer_rewind
 *
 *   Selects to rewind in the audio data stream.  The rewind operation must
 *   be cancelled with nxplayer_cancel_motion.  This function may be called
 *   multiple times to change rewind rate.
 *
 *   NOTE that cancellation of the rewind operation differs from
 *   cancellation of the fast forward operation because we must both restore
 *   the sub-sampling rate to 1x and also return to forward play.
 *   AUDIO_SUBSAMPLE_NONE is not a valid argument to this function.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   subsample - Identifies the rewind rate (in terms of sub-sampling, but
 *               does not explicitly require sub-sampling).  See
 *               AUDIO_SUBSAMPLE_* definitions.
 *
 * Returned Value:
 *   OK if rewind operation successfully initiated.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_REWIND
int nxplayer_rewind(FAR struct nxplayer_s *pplayer, uint8_t subsample);
#endif

/****************************************************************************
 * Name: nxplayer_cancel_motion
 *
 *   Cancel a rewind or fast forward operation and return to either the
 *   paused state or to the normal, forward play state.
 *
 * Input Parameters:
 *   pplayer - Pointer to the context to initialize
 *   paused  - True: return to the paused state, False: return to the 1X
 *             forward play state.
 *
 * Returned Value:
 *   OK if rewind operation successfully cancelled.
 *
 ****************************************************************************/

#if !defined(CONFIG_AUDIO_EXCLUDE_FFORWARD) || !defined(CONFIG_AUDIO_EXCLUDE_REWIND)
int nxplayer_cancel_motion(FAR struct nxplayer_s *pplayer, bool paused);
#endif

/****************************************************************************
 * Name: nxplayer_setvolume
 *
 *   Sets the playback volume.  The volume is represented in 1/10th of a
 *   percent increments, so the range is 0-1000.  A value of 10 would mean
 *   1%.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   volume    - Volume level to set in 1/10th percent increments
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_VOLUME
int nxplayer_setvolume(FAR struct nxplayer_s *pplayer, uint16_t volume);
#endif

/****************************************************************************
 * Name: nxplayer_setbalance
 *
 *   Sets the playback balance.  The balance is represented in 1/10th of a
 *   percent increments, so the range is 0-1000.  A value of 10 would mean
 *   1%.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   balance   - Balance level to set in 1/10th percent increments
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_VOLUME
#ifndef CONFIG_AUDIO_EXCLUDE_BALANCE
int nxplayer_setbalance(FAR struct nxplayer_s *pplayer, uint16_t balance);
#endif
#endif

/****************************************************************************
 * Name: nxplayer_setmediadir
 *
 *   Sets the root media directory for non-path qualified file searches.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   mediadir  - Pointer to pathname of the media directory
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

void nxplayer_setmediadir(FAR struct nxplayer_s *pplayer,
                          FAR const char *mediadir);

/****************************************************************************
 * Name: nxplayer_setequalization
 *
 *   Sets the level on each band of an equalizer.  Each band setting is
 *   represented in one percent increments, so the range is 0-100.
 *
 * Input Parameters:
 *   pplayer      - Pointer to the context to initialize
 *   equalization - Pointer to array of equalizer settings of size
 *                  CONFIG_AUDIO_EQUALIZER_NBANDS bytes.  Each byte
 *                  represents the setting for one band in the range of
 *                  0-100.
 *
 * Returned Value:
 *   OK if equalization was set correctly.
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_EQUALIZER
int nxplayer_setequalization(FAR struct nxplayer_s *pplayer,
                             FAR uint8_t *equalization);
#endif

/****************************************************************************
 * Name: nxplayer_setbass
 *
 *   Sets the playback bass level.  The bass is represented in one percent
 *   increments, so the range is 0-100.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   bass      - Bass level to set in one percent increments
 *
 * Returned Value:
 *   OK if the bass level was set successfully
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_TONE
int nxplayer_setbass(FAR struct nxplayer_s *pplayer, uint8_t bass);
#endif

/****************************************************************************
 * Name: nxplayer_settreble
 *
 *   Sets the playback treble level.  The bass is represented in one percent
 *   increments, so the range is 0-100.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *   treble    - Treble level to set in one percent increments
 *
 * Returned Value:
 *   OK if the treble level was set successfully
 *
 ****************************************************************************/

#ifndef CONFIG_AUDIO_EXCLUDE_TONE
int nxplayer_settreble(FAR struct nxplayer_s *pplayer, uint8_t treble);
#endif

/****************************************************************************
 * Name: nxplayer_systemreset
 *
 *   Performs an audio system reset, including a hardware reset on all
 *   registered audio devices.
 *
 * Input Parameters:
 *   pplayer   - Pointer to the context to initialize
 *
 * Returned Value:
 *   OK if file found, device found, and playback started.
 *
 ****************************************************************************/

#ifdef CONFIG_NXPLAYER_INCLUDE_SYSTEM_RESET
int nxplayer_systemreset(FAR struct nxplayer_s *pplayer);
#endif

#undef EXTERN
#ifdef __cplusplus
}
#endif

#endif /* __APPS_INCLUDE_SYSTEM_NXPLAYER_H */