< scroll down for English version and additional information >

wbec

WLAN-Anbindung der Heidelberg WallBox Energy Control über ESP8266

Die Heidelberg Wallbox Energy Control ist eine hochwertige Ladestation, bietet aber nur Modbus RTU als Schnittstelle.
Ziel des Projekts ist es, eine WLAN-Schnittstelle zu entwickeln, die gleichzeitig die Modbus-Leader-Funktion übernimmt.

Funktionen

Anbindung an openWB, EVCC, Solaranzeige (per tlw. Emulation der go-eCharger API)
MQTT-Kommunikation mit openWB und EVCC (ideal für mehrere Ladestationen)
Steuerbar per Android App Wallbox Steuerung
PV-Überschussladen, Zielladen, etc. mit den o.g. Steuerungen
RFID-Kartenleser zur Freischaltung der Wallbox mit gültiger Karte/Chip (spezielle HW nötig, s. Wiki)
Ansteuerung aller verbundenen Ladestationen (bis zu 16 Follower am Modbus, bis zu 8 openWB-Ladepunkte)
Lesen/Schreiben der Modbus-Register über ein JSON-Web-Interface
Standby-Funktion der Ladestation einstellbar
Einfacher Prototyp einer Webseite zur Steuerung
Einfacher Prototyp eines lokalen Lastmanagements (in Entwicklung)
Softwareupdate per WLAN (Over The Air), z.B. mit PlatformIO oder einfach per Browser (s. Wiki)
Access-Point-Modus zur initialen Einstellung des WLANs (SSID/Passwort, s. Wiki)
Weniger als 1W Strombedarf (trotz Ansteuerung von bis zu 16 Ladestationen)

Kontakt

Bei Fragen oder wenn ihr Unterstützung braucht gerne einfach eine Mail schicken (wbec393@gmail.com)
Bitte schaut auch ins Wiki und in meine anderen Projekte.

Bilder

Dank

wbec

Wifi interface to Heidelberg WallBox Energy Control using ESP8266

The Heidelberg Wallbox Energy Control is a high quality wallbox, but it offers only a Modbus RTU interface. Goal of this project is to establish an Wifi interface, which also acts as Modbus master.

Features

Works with openWB, EVCC, Solaranzeige (by emulation of parts of the go-eCharger API)
Support of MQTT communication to openWB and EVCC (perfect for multiple wallboxes)
Support of Android App Wallbox Steuerung
RFID card reader for unlocking the wallbox only with valid card/chip (needs special HW, s. Wiki)
Prepared for supporting up to all 16 connected boxes (up to 8 openWB load points)
Modbus registers can be read/written via JSON web interface
Standby of Wallbox can be configured
Simple prototype of a web interface
Simple prototype of a local load management
Update via WiFi (OTA), e.g. with PlatformIO or simply via Web browser (s. Wiki)
Access point mode, to configure your WiFi network/password (s. Wiki)
< 1W power consumption (for controlling up to 16 boxes)

Contact

In case of any questions or in case you need support, feel free to send a mail (wbec393@gmail.com) ;-)
Please also take a look to the Wiki.

Switch configuration of wallbox

S1 >= 5 (16A max)
S2 = 0000
S3 = 0 (6A min)
S4 = 0001 (slave address, Bus-ID)
S5 = 0000
S6 = 0100 (terminator 120 Ohm, only on last box)

Examples

Simple web interface (example with powerfox setup):
http://x.x.x.x/web.html

Get current status (here for 2 configured wallboxes, but only 1 connected):

http://192.168.xx.yy/json

{
  "wbec": {
    "version": "v0.3.0"         // wbec version
    "bldDate": "2021-06-10"     // wbec build date
  },
  "box": [
    {                           // s. also https://wallbox.heidelberg.com/wp-content/uploads/2021/04/EC_ModBus_register_table_20210222.pdf
      "busId": 1,               // Modbus bus id (as configured by DIP switches)
      "version": "108",         // Modbus Register-Layouts Version, e.g. 1.0.8
      "chgStat": 2,             // Charging State
      "currL1": 0,              // L1 - Current RMS (in 0.1A)
      "currL2": 0,              // L2 - Current RMS (in 0.1A)
      "currL3": 0,              // L3 - Current RMS (in 0.1A)
      "pcbTemp": 333,           // PCB-Temperatur (in 0.1°C)
      "voltL1": 232,            // Voltage L1 - N rms in Volt
      "voltL2": 9,              // Voltage L2 - N rms in Volt
      "voltL3": 9,              // Voltage L3 - N rms in Volt
      "extLock": 1,             // extern lock state
      "power": 0,               // Power (L1+L2+L3) in VA
      "energyP": 0,             // Energy since PowerOn (in kWh)
      "energyI": 0.003,         // Energy since Installation (in kWh)
      "currMax": 16,            // Hardware configuration maximal current (in 0.1A)
      "currMin": 6,             // Hardware configuration minimal current (in 0.1A)
      "logStr": "<item no> <mfgDate> <serial>",
      "wdTmOut": 15000,         // ModBus-Master WatchDog Timeout (in ms)
      "standby": 4,             // Standby Function Control 
      "remLock": 1,             // Remote lock (only if extern lock unlocked) 
      "currLim": 130,           // Maximal current command
      "currFs": 0,              // FailSafe Current configuration 
      "load": 0,                // wbec load management
      "resCode": "0"            // Result code of last Modbus message (0 = ok)
    },
    {                           // Values of 2nd box ...
      "busId": 2,
      "version": "0",
      "chgStat": 0,
      ...
      "load": 0,
      "resCode": "e4"
    }
  ],
  "modbus": {
    "state": {
      "lastTm": 2852819,        // Timestamp of last Modbus message (in ms)
      "millis": 2855489         // Time since start of wbec (in ms)
    }
  },
  "rfid": {
    "enabled": true,
    "release": false,
    "lastId": "0cb6a781"
  },
  "wifi": {
    "mac": "00:1F:3F:15:29:7E", // wbec MAC address
    "rssi": -76,                // WiFi signal
    "signal": 48,               // WiFi signal quality (in %)
    "channel": 11               // WiFi channel
  }
}

Set allowed current:

http://192.168.xx.yy/json?currLim=120      --> set current limit to 12A (on the box with id=0, i.e. ModBus Bus-ID=1)
http://192.168.xx.yy/json?currLim=60&id=2  --> set current limit to 6A on the box with id=2 (i.e. ModBus Bus-ID=3)

Set Watchdog timeout:

http://192.168.xx.yy/json?wdTmOut=20000

go-eCharger API

wbec can partly emulate the API of Go-eCharger (https://github.com/goecharger/go-eCharger-API-v1) via the following HTTP commands:

Read:
http://x.x.x.x/status
{"car":"1","alw":"1","amp":"6","err":"0","stp":"0","tmp":"307","dws":"5955","ubi":"0","eto":"59","nrg":[231,232,234,0,0,0,0,0,0,0,0,0,0,0,0,0],"fwv":"40"}
{"version":"B","car":"1","err":"0","alw":"1","amp":"6","amx":"6","stp":"0","pha":"63","tmp":"307","dws":"0","dwo":"0","uby":"0","eto":"59","nrg":[233,234,233,0,0,0,0,0,0,0,0,0,0,0,0,0],"fwv":"40","sse":"123456","ama":"16","ust":"2"}

Write:
http://x.x.x.x/mqtt?payload=...

This offers a simple way to integrate wbec into Energy Management Systems, which support go-eCharger, but not the Heidelberg Energy Control, such as EVCC or Solaranzeige.

Credits

Third-party libraries included/adapted in wbec:

Special thanks also to the early testers and supporters: mli987, profex1337, Clanchef and many more!

Support the project

You like wbec? Please star this project on GitHub!

License

AMiketta/wbec

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 1

Packages 0

Languages

Error
Looks like something went wrong!

Packages