media: Add a driver for the og01a1b camera sensor

Add a V4L2 sub-device driver for Omnivision og01a1b b&w
image sensor. This is a camera sensor using the I2C bus
for control and the CSI-2 bus for data.

This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
  + 1280x1024 at 120FPS

Signed-off-by: Shawn Tu <shawnx.tu@intel.com>

MAINTAINERS

@@ -14311,6 +14311,12 @@ M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4040_cs.*
 
+OMNIVISION OG01A1B SENSOR DRIVER
+M:	Shawn Tu <shawnx.tu@intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/i2c/og01a1b.c
+
 OMNIVISION OV02A10 SENSOR DRIVER
 M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
 L:	linux-media@vger.kernel.org

drivers/media/i2c/Kconfig

@@ -912,6 +912,19 @@ config VIDEO_IMX412
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx412.
 
+config VIDEO_OG01A1B
+	tristate "OmniVision OG01A1B sensor support"
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OG01A1B camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called og01a1b.
+
 config VIDEO_OV02A10
 	tristate "OmniVision OV02A10 sensor support"
 	depends on VIDEO_V4L2 && I2C

drivers/media/i2c/Makefile

@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
 obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
 obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
 obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
+obj-$(CONFIG_VIDEO_OG01A1B) += og01a1b.o
 obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o
 obj-$(CONFIG_VIDEO_OV08D10) += ov08d10.o
 obj-$(CONFIG_VIDEO_OV2640) += ov2640.o