drm/bridge: imx: Add LDB support for i.MX8qxp

This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper.  The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards.  The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display.  The channel indexes have to be
different.  Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

drivers/gpu/drm/bridge/imx/Kconfig

@@ -1,3 +1,12 @@
+config DRM_IMX8QXP_LDB
+	tristate "Freescale i.MX8QXP LVDS display bridge"
+	depends on OF
+	depends on COMMON_CLK
+	select DRM_KMS_HELPER
+	help
+	  Choose this to enable the internal LVDS Display Bridge(LDB) found in
+	  Freescale i.MX8qxp processor.  Official name of LDB is pixel mapper.
+
 config DRM_IMX8QXP_PIXEL_COMBINER
 	tristate "Freescale i.MX8QM/QXP pixel combiner"
 	depends on OF

drivers/gpu/drm/bridge/imx/Makefile

@@ -1,3 +1,6 @@
+imx8qxp-ldb-objs := imx-ldb-helper.o imx8qxp-ldb-drv.o
+obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o
+
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o