diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4fd13b06231f20..1f6a6adc4ab04b 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1339,6 +1339,15 @@ config REGULATOR_TPS65912 help This driver supports TPS65912 voltage regulator chip. +config REGULATOR_TPS68470 + tristate "TI TPS68370 PMIC Regulators Driver" + depends on INTEL_SKL_INT3472 || COMPILE_TEST + help + This driver adds support for the TPS68470 PMIC to register + regulators against the usual framework. + + The module will be called "tps68470-regulator". + config REGULATOR_TPS80031 tristate "TI TPS80031/TPS80032 power regulator driver" depends on MFD_TPS80031 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9e382b50a5ef0c..03c3181109863c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -158,6 +158,7 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o +obj-$(CONFIG_REGULATOR_TPS68470) += tps68470-regulator.o obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o diff --git a/drivers/regulator/tps68470-regulator.c b/drivers/regulator/tps68470-regulator.c new file mode 100644 index 00000000000000..7bce45df1596ed --- /dev/null +++ b/drivers/regulator/tps68470-regulator.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator driver for TPS68470 PMIC +// +// Copyright (c) 2021 Red Hat Inc. +// Copyright (C) 2018 Intel Corporation +// +// Authors: +// Hans de Goede +// Zaikuo Wang +// Tianshu Qiu +// Jian Xu Zheng +// Yuning Pu +// Rajmohan Mani + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct tps68470_regulator_data { + struct clk *clk; +}; + +#define TPS68470_REGULATOR(_name, _id, _ops, _n, _vr, \ + _vm, _er, _em, _t, _lr, _nlr) \ + [TPS68470_ ## _name] = { \ + .name = # _name, \ + .id = _id, \ + .ops = &_ops, \ + .n_voltages = _n, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = _vr, \ + .vsel_mask = _vm, \ + .enable_reg = _er, \ + .enable_mask = _em, \ + .volt_table = _t, \ + .linear_ranges = _lr, \ + .n_linear_ranges = _nlr, \ + } + +static const struct linear_range tps68470_ldo_ranges[] = { + REGULATOR_LINEAR_RANGE(875000, 0, 125, 17800), +}; + +static const struct linear_range tps68470_core_ranges[] = { + REGULATOR_LINEAR_RANGE(900000, 0, 42, 25000), +}; + +int tps68470_regulator_enable(struct regulator_dev *rdev) +{ + struct tps68470_regulator_data *data = rdev->reg_data; + int ret; + + /* The Core buck regulator needs the PMIC's PLL to be enabled */ + if (rdev->desc->id == TPS68470_CORE) { + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&rdev->dev, "Error enabling TPS68470 clock\n"); + return ret; + } + } + + return regulator_enable_regmap(rdev); +} + +int tps68470_regulator_disable(struct regulator_dev *rdev) +{ + struct tps68470_regulator_data *data = rdev->reg_data; + + if (rdev->desc->id == TPS68470_CORE) + clk_disable_unprepare(data->clk); + + return regulator_disable_regmap(rdev); +} + +/* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */ +static const struct regulator_ops tps68470_regulator_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = tps68470_regulator_enable, + .disable = tps68470_regulator_disable, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, +}; + +static const struct regulator_desc regulators[] = { + TPS68470_REGULATOR(CORE, TPS68470_CORE, + tps68470_regulator_ops, 43, TPS68470_REG_VDVAL, + TPS68470_VDVAL_DVOLT_MASK, TPS68470_REG_VDCTL, + TPS68470_VDCTL_EN_MASK, + NULL, tps68470_core_ranges, + ARRAY_SIZE(tps68470_core_ranges)), + TPS68470_REGULATOR(ANA, TPS68470_ANA, + tps68470_regulator_ops, 126, TPS68470_REG_VAVAL, + TPS68470_VAVAL_AVOLT_MASK, TPS68470_REG_VACTL, + TPS68470_VACTL_EN_MASK, + NULL, tps68470_ldo_ranges, + ARRAY_SIZE(tps68470_ldo_ranges)), + TPS68470_REGULATOR(VCM, TPS68470_VCM, + tps68470_regulator_ops, 126, TPS68470_REG_VCMVAL, + TPS68470_VCMVAL_VCVOLT_MASK, TPS68470_REG_VCMCTL, + TPS68470_VCMCTL_EN_MASK, + NULL, tps68470_ldo_ranges, + ARRAY_SIZE(tps68470_ldo_ranges)), + TPS68470_REGULATOR(VIO, TPS68470_VIO, + tps68470_regulator_ops, 126, TPS68470_REG_VIOVAL, + TPS68470_VIOVAL_IOVOLT_MASK, TPS68470_REG_S_I2C_CTL, + TPS68470_S_I2C_CTL_EN_MASK, + NULL, tps68470_ldo_ranges, + ARRAY_SIZE(tps68470_ldo_ranges)), + +/* + * (1) This register must have same setting as VIOVAL if S_IO LDO is used to + * power daisy chained IOs in the receive side. + * (2) If there is no I2C daisy chain it can be set freely. + * + */ + TPS68470_REGULATOR(VSIO, TPS68470_VSIO, + tps68470_regulator_ops, 126, TPS68470_REG_VSIOVAL, + TPS68470_VSIOVAL_IOVOLT_MASK, TPS68470_REG_S_I2C_CTL, + TPS68470_S_I2C_CTL_EN_MASK, + NULL, tps68470_ldo_ranges, + ARRAY_SIZE(tps68470_ldo_ranges)), + TPS68470_REGULATOR(AUX1, TPS68470_AUX1, + tps68470_regulator_ops, 126, TPS68470_REG_VAUX1VAL, + TPS68470_VAUX1VAL_AUX1VOLT_MASK, + TPS68470_REG_VAUX1CTL, + TPS68470_VAUX1CTL_EN_MASK, + NULL, tps68470_ldo_ranges, + ARRAY_SIZE(tps68470_ldo_ranges)), + TPS68470_REGULATOR(AUX2, TPS68470_AUX2, + tps68470_regulator_ops, 126, TPS68470_REG_VAUX2VAL, + TPS68470_VAUX2VAL_AUX2VOLT_MASK, + TPS68470_REG_VAUX2CTL, + TPS68470_VAUX2CTL_EN_MASK, + NULL, tps68470_ldo_ranges, + ARRAY_SIZE(tps68470_ldo_ranges)), +}; + +static int tps68470_regulator_probe(struct platform_device *pdev) +{ + struct tps68470_regulator_platform_data *pdata = pdev->dev.platform_data; + struct tps68470_regulator_data *data; + struct regulator_config config = { }; + struct regulator_dev *rdev; + int i; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clk = devm_clk_get(&pdev->dev, "tps68470-clk"); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, "Error getting tps68470-clk\n"); + return PTR_ERR(data->clk); + } + + config.dev = pdev->dev.parent; + config.regmap = dev_get_drvdata(pdev->dev.parent); + config.driver_data = data; + + for (i = 0; i < TPS68470_NUM_REGULATORS; i++) { + if (pdata) + config.init_data = pdata->reg_init_data[i]; + else + config.init_data = NULL; + + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s regulator\n", + regulators[i].name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver tps68470_regulator_driver = { + .driver = { + .name = "tps68470-regulator", + }, + .probe = tps68470_regulator_probe, +}; + +/* + * The ACPI tps68470 probe-ordering depends on the clk/gpio/regulator drivers + * registering before the drivers for the camera-sensors which use them bind. + * subsys_initcall() ensures this when the drivers are builtin. + */ +static int __init tps68470_regulator_init(void) +{ + return platform_driver_register(&tps68470_regulator_driver); +} +subsys_initcall(tps68470_regulator_init); + +static void __exit tps68470_regulator_exit(void) +{ + platform_driver_unregister(&tps68470_regulator_driver); +} +module_exit(tps68470_regulator_exit); + +MODULE_ALIAS("platform:tps68470-regulator"); +MODULE_DESCRIPTION("TPS68470 voltage regulator driver"); +MODULE_LICENSE("GPL v2");