drm/panel-simple: Add Vivax TPC-9150 panel v3

The model and make of the LCD panel of the Vivax TPC-9150 is unknown,
hence the panel settings that were retrieved with a FEX dump are named
after the device NOT the actual panel.

The LCD in question is a 50 pin MISO TFT LCD panel of the resolution
1024x600 used by the aforementioned device.

Version 2, as Thierry kindly suggested that I fix the order in which the
panel was ordered compared to others.

Version 3, filling in the required info suggested by Sam. Plus some
factual issues that I've corrected myself (tested working)

Thanks,
Nikola

Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>

drivers/gpu/drm/panel/panel-simple.c

@@ -4363,6 +4363,32 @@ static const struct panel_desc urt_umsh_8596md_parallel = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
+static const struct drm_display_mode vivax_tpc9150_panel_mode = {
+	.clock = 60000,
+	.hdisplay = 1024,
+	.hsync_start = 1024 + 160,
+	.hsync_end = 1024 + 160 + 100,
+	.htotal = 1024 + 160 + 100 + 60,
+	.vdisplay = 600,
+	.vsync_start = 600 + 12,
+	.vsync_end = 600 + 12 + 10,
+	.vtotal = 600 + 12 + 10 + 13,
+};
+
+static const struct panel_desc vivax_tpc9150_panel = {
+	.modes = &vivax_tpc9150_panel_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 200,
+		.height = 115,
+	},
+	.bpc = 6,
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+
 static const struct drm_display_mode vl050_8048nt_c01_mode = {
 	.clock = 33333,
 	.hdisplay = 800,
@@ -4891,6 +4917,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "urt,umsh-8596md-20t",
 		.data = &urt_umsh_8596md_parallel,
+	}, {
+		.compatible = "vivax,tpc9150-panel",
+		.data = &vivax_tpc9150_panel,
 	}, {
 		.compatible = "vxt,vl050-8048nt-c01",
 		.data = &vl050_8048nt_c01,