In newer variants primary codec is rt5682vs. Add support for newer
codec variants in generic machine driver module and define driver
data to register SOF sound card.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

In newer chrome boards we have max98360a as an amplifier codec.
Add support for max98360a in generic machine driver and configure
driver data to enable SOF sound card support on newer boards .

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

Chrome board has RT5682 codec and RT1019 amp connected to I2S SP
controller on ACP hw. Also it support DMIC capture endpoints with
inbuilt pdm controller on ACP hw block. Add driver module to create
backend dai links for sof dsp core. We pass driver data with audio
end points configuration to register sound cards and create device
nodes for all audio endpoints.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

Renoir based Chrome board has RT5682 as primary headset codec and
RT1019 amp device connected to I2SSP ACP i2s controller. Add driver
to register legacy sound card devices on Chrome board.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

We have machines with different audio endpoints configurations
across various distributions. We need to support multiple sound
cards for different combinations of I2S instance and codecs hw.
Now we also need to support SOF-DSP endpoints based sound cards.
All such card combinations slightly differs in terms of machine
ops callback. This patch adds ACP generic machine driver module
that exposes method to create ACP cards dai links and define new
ops for audio endpoints configurations. Initially we have added
dailink support for RT5682 and RT1019 codec connection with ACP
I2S_SP instance. We will add newer codecs in this module to use
this for all AMD's ACP block sound cards supports in future.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

Add method to select and register machine driver for acp platform
based on ACPI ID.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

Add I2S dai driver for Renoir platform and register with common
acp framework to support non dsp I2S use case on Renoir.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

We are using legacy way of exposing dais and DMA configuration that
requires separate driver modules for various ACP SOC with almost
similar hw configuration. Moreover the legacy approach requires
separate I2S and DMA module platform devices registration and need
machine specific quirk to control various I2S endpoints. Add generic
dai driver and platform driver for I2S controller on ACP hw block.
This common framework can be used by various ACP platform devices
that shares common specs.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

…chenko <andriy.shevchenko@linux.intel.com>:

The small set of cleanups against bytcr_rt5651 board file.

In v2:
- added commit message to patch 2 (Joe, Pierre)
- added cover letter (Pierre)
- added Hans to Cc list (Hans)

Andy Shevchenko (4):
  ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
  ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
  ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
  ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
    saturation

 sound/soc/intel/boards/bytcr_rt5651.c | 118 +++++++++++---------------
 1 file changed, 50 insertions(+), 68 deletions(-)

--
2.33.0

…ation

dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007170250.27997-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007170250.27997-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007170250.27997-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Access to platform data via dev_get_platdata() getter to make code cleaner.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007170250.27997-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

…ation

dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Access to platform data via dev_get_platdata() getter to make code cleaner.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The SH machine drivers have some ASoC DAI format specifications that use
older defines based on outdated terminology which we're trying to retire,
update to the new bindings.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210915172302.36677-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

We are using fch clock controller as parent mclk source for rt5682
codec. Add config to enable clock framework support for 48MHz fixed
clock when machine driver config is selected.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211011055354.67719-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

'component' is allocated in snd_soc_register_component(), but component->list
is not initalized, this may cause snd_soc_del_component_unlocked() deref null
ptr in the error handing case.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__list_del_entry_valid+0x81/0xf0
Call Trace:
 snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core]
 snd_soc_add_component.cold+0x54/0x6c [snd_soc_core]
 snd_soc_register_component+0x70/0x90 [snd_soc_core]
 devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core]
 tas2552_probe+0x265/0x320 [snd_soc_tas2552]
 ? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552]
 i2c_device_probe+0xa31/0xbe0

Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211009065840.3196239-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

…el/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "A bit of a big batch, partly because I didn't send any last week, and
  also just because the BPF fixes happened to land this week.

  Summary:

   - Fix a regression hit by the IPR SCSI driver, introduced by the
     recent addition of MSI domains on pseries.

   - A big series including 8 BPF fixes, some with potential security
     impact and the rest various code generation issues.

   - Fix our program check assembler entry path, which was accidentally
     jumping into a gas macro and generating strange stack frames, which
     could confuse find_bug().

   - A couple of fixes, and related changes, to fix corner cases in our
     machine check handling.

   - Fix our DMA IOMMU ops, which were not always returning the optimal
     DMA mask, leading to at least one device falling back to 32-bit DMA
     when it shouldn't.

   - A fix for KUAP handling on 32-bit Book3S.

   - Fix crashes seen when kdumping on some pseries systems.

  Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
  Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
  Christoph Hellwig, Johan Almbladh, Stan Johnson"

* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
  powerpc/32s: Fix kuap_kernel_restore()
  powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
  powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
  powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
  powerpc/64: warn if local irqs are enabled in NMI or hardirq context
  powerpc/traps: do not enable irqs in _exception
  powerpc/64s: fix program check interrupt emergency stack path
  powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
  powerpc/bpf ppc32: Fix JMP32_JSET_K
  powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
  powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
  powerpc/security: Add a helper to query stf_barrier type
  powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf: Fix BPF_MOD when imm == 1
  powerpc/bpf: Validate branch ranges
  powerpc/lib: Add helper to check if offset is within conditional branch range
  powerpc/iommu: Report the correct most efficient DMA mask for PCI devices

…scm/linux/kernel/git/tip/tip

Pull objtool fixes from Borislav Petkov:

 - Remove an extra section.len member in favour of section.sh_size

 - Align .altinstructions section creation with the kernel's by creating
   them with entry size of 0

 - Fix objtool to convert a reloc symbol to a section offset and not to
   not warn about not knowing how

* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Remove redundant 'len' field from struct section
  objtool: Make .altinstructions section entry size consistent
  objtool: Remove reloc symbol type checks in get_alt_entry()

…linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
   out due to historical reasons and 64-bit kernels reject them

 - A fix to clear X86_FEATURE_SMAP when support for is not
   config-enabled

 - Three fixes correcting misspelled Kconfig symbols used in code

 - Two resctrl object cleanup fixes

 - Yet another attempt at fixing the neverending saga of botched x86
   timers, this time because some incredibly smart hardware decides to
   turn off the HPET timer in a low power state - who cares if the OS is
   relying on it...

 - Check the full return value range of an SEV VMGEXIT call to determine
   whether it returned an error

* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Restore the masking out of reserved MXCSR bits
  x86/Kconfig: Correct reference to MWINCHIP3D
  x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
  x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
  x86/entry: Correct reference to intended CONFIG_64_BIT
  x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
  x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
  x86/hpet: Use another crystalball to evaluate HPET usability
  x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]

…linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes and one leak fix for the core"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxcpld: Modify register setting for 400KHz frequency
  i2c: mlxcpld: Fix criteria for frequency setting
  i2c: mediatek: Add OFFSET_EXT_CONF setting back
  i2c: acpi: fix resource leak in reconfiguration device addition

…it/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Five fixes, all in drivers.

  The big change is the UFS task management rework, with lpfc next and
  the rest being fairly minor and obvious fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: Fix iscsi_task use after free
  scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling
  scsi: elx: efct: Delete stray unlock statement
  scsi: ufs: core: Fix task management completion
  scsi: acornscsi: Remove scsi_cmd_to_tag() reference

Pull block fixes from Jens Axboe:
 "Two small fixes for this release:

   - Add missing QUEUE_FLAG_HCTX_ACTIVE in the debugfs handling
     (Johannes)

   - Fix double free / UAF issue in __alloc_disk_node (Tetsuo)"

* tag 'block-5.15-2021-10-09' of git://git.kernel.dk/linux-block:
  block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output
  block: genhd: fix double kfree() in __alloc_disk_node()

Pull ksmbd fixes from Steve French:
 "Six fixes for the ksmbd kernel server, including two additional
  overflow checks, a fix for oops, and some cleanup (e.g. remove dead
  code for less secure dialects that has been removed)"

* tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix oops from fuse driver
  ksmbd: fix version mismatch with out of tree
  ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()
  ksmbd: remove the leftover of smb2.0 dialect support
  ksmbd: check strictly data area in ksmbd_smb2_check_message()
  ksmbd: add the check to vaildate if stream protocol length exceeds maximum value

…linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of fixes (along with the necessory cleanup) to our VDSO, to
   avoid a locking during OOM and to prevent the text from overflowing
   into the data page

 - A fix to checksyscalls to teach it about our rv32 UABI

 - A fix to add clone3() to the rv32 UABI, which was pointed out by
   checksyscalls

 - A fix to properly flush the icache on the local CPU in addition to
   the remote CPUs

* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  checksyscalls: Unconditionally ignore fstat{,at}64
  riscv: Flush current cpu icache before other cpus
  RISC-V: Include clone3() on rv32
  riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  riscv/vdso: Move vdso data page up front
  riscv/vdso: Refactor asm/vdso.h

…git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix potential memory leak on a error path in eBPF

 - Fix handling of zpci device on reserve

* tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix zpci_zdev_put() on reserve
  bpf, s390: Fix potential memory leak about jit_data

Pull xtensa fixes from Max Filippov:

 - fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage

 - fix reset handler for xtfpga boards

* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: xtfpga: Try software restart before simulating CPU reset
  xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
  xtensa: call irqchip_init only when CONFIG_USE_OF is selected
  xtensa: use CONFIG_USE_OF instead of CONFIG_OF

…inux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

 - fix two minor issues in the Xen privcmd driver plus a cleanup patch
   for that driver

 - fix multiple issues related to running as PVH guest and some related
   earlyprintk fixes for other Xen guest types

 - fix an issue introduced in 5.15 the Xen balloon driver

* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix cancelled balloon action
  xen/x86: adjust data placement
  x86/PVH: adjust function/data placement
  xen/x86: hook up xen_banner() also for PVH
  xen/x86: generalize preferred console model from PV to PVH Dom0
  xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
  xen/x86: allow "earlyprintk=xen" to work for PV Dom0
  xen/x86: make "earlyprintk=xen" work better for PVH Dom0
  xen/x86: allow PVH Dom0 without XEN_PV=y
  xen/x86: prevent PVH type from getting clobbered
  xen/privcmd: drop "pages" parameter from xen_remap_pfn()
  xen/privcmd: fix error handling in mmap-resource processing
  xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages

…nux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "There is one build fix for Arm platforms that ended up impacting most
  architectures because of the way the drivers/firmware Kconfig file is
  wired up:

  The CONFIG_QCOM_SCM dependency have caused a number of randconfig
  regressions over time, and some still remain in v5.15-rc4. The fix we
  agreed on in the end is to make this symbol selected by any driver
  using it, and then building it even for non-Arm platforms with
  CONFIG_COMPILE_TEST.

  To make this work on all architectures, the drivers/firmware/Kconfig
  file needs to be included for all architectures to make the symbol
  itself visible.

  In a separate discussion, we found that a sound driver patch that is
  pending for v5.16 needs the same change to include this Kconfig file,
  so the easiest solution seems to have my Kconfig rework included in
  v5.15.

  Finally, the branch also includes a small unrelated build fix for
  NOMMU architectures"

Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/

* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
  qcom_scm: hide Kconfig symbol
  firmware: include drivers/firmware/Kconfig unconditionally