Replace macro function by static inline function.
Issue suggested by Julia.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>

Replace macro function by static inline function.
Issue suggested by Julia.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>

Replace macro function by static inline function.
Issue suggested by Julia.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>

Replace macro function by static inline function.
Issue suggested by Julia.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>

For two of the supported sensors the stv06xx driver allocates memory which
is stored in sd->sensor_priv. This memory is freed on a disconnect, but if
the probe() fails, then it isn't freed and so this leaks memory.

Add a new probe_error() op that drivers can use to free any allocated
memory in case there was a probe failure.

Thanks to Pavel Skripkin <paskripkin@gmail.com> for discovering the cause
of the memory leak.

Reported-and-tested-by: syzbot+e7f4c64a4248a0340c37@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.

Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add support for EDIDs consisting of one EDID block.

Related to this, improve CEC physical address handling.

Clearing the EDID caused a bug since v4l2_calc_aspect_ratio() was
called with a NULL pointer.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Only the first pad was configured, but there are 4. This causes
set_fmt to fail with -EINVAL since the passed pad is > 0.

Configure all three sink pads and the source pad.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The /** at the start indicates that these are kernel-doc comments, but
really these are just regular comments.

Replace /** by /* to avoid a large number of warnings from kernel-doc.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Suggested-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

…v_init()

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sparse reports a warning on a cast to u8 of a 16 bits constant.

drivers/media/i2c/rdacm21.c:348:62: warning: cast truncates bits
from constant value (300a becomes a)

Even if the behaviour is intended, silence the sparse warning replacing
the cast with a bitwise & operation.

Fixes: a59f853 ("media: i2c: Add driver for RDACM21 camera module")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename variable 'He' to 'he' to eliminate camelcase.
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename variable 'We' to 'we' to eliminate camelcase.
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename 'VidWinHt' to 'vid_win_ht' to eliminate camelcase.
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename variable 'VidWinWid' to 'vid_win_wid' to eliminate camelcase.
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename variable 'DispMode' to 'disp_mode' to eliminate camelcase.
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename variable 'VEnd' to 'v_end' to eliminate camelcase.
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename variable 'HEnd' to 'h_end' to eliminate camelcase
Reported by checkpatch.pl.

Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Cleans up checks of "Alignment should match open parenthesis"
in iss.c:96.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Do not modify imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp, until the
format has been correctly validated.

Otherwise, even if we use a backup variable, there is a period of time
where imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp might have an invalid
value that can be used by other functions.

Cc: stable@vger.kernel.org
Fixes: ad91849 ("media: staging/intel-ipu3: Fix set_fmt error handling")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

We are losing the reference to an allocated memory if try. Change the
order of the check to avoid that.

Cc: stable@vger.kernel.org
Fixes: 6d5f26f ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix the following coverity warning:

This greater-than-or-equal-to-zero comparison of an unsigned value is
always true. "opcode >= 0".

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Building with 'make W=1' shows many warnings -Wempty-body warnings like

drivers/media/usb/dvb-usb/vp702x-fe.c: In function 'vp702x_fe_set_frontend':
drivers/media/usb/dvb-usb/vp702x-fe.c:190:46: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  190 |                 deb_fe("tuning succeeded.\n");
drivers/media/usb/dvb-usb/dtt200u.c: In function 'dtt200u_rc_query':
drivers/media/usb/dvb-usb/dtt200u.c:124:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  124 |                 deb_info("st->data: %*ph\n", 5, st->data);
drivers/media/usb/dvb-usb/m920x.c: In function 'm920x_rc_query':
drivers/media/usb/dvb-usb/m920x.c:207:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  207 |                 deb("Unknown rc key %02x\n", rc_state[1]);

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Building with 'make W=1' shows many warnings -Wempty-body warnings like

drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
   35 |                 deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");

drivers/media/usb/b2c2/flexcop-usb.c: In function 'flexcop_usb_process_frame':
drivers/media/usb/b2c2/flexcop-usb.c:357:79: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  357 |                                         deb_ts("not ts packet %*ph\n", 4, b+2);
      |                                                                               ^
drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
   35 |                 deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
      |                                                                                     ^

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The Asus PN50 has 16 byte io region for the ITE8708 in its DSDT, which
causes the probe fail. So, accept larger regions.

Link: https://www.spinics.net/lists/linux-media/msg177725.html

Cc: Nikolaos Beredimas <beredim@gmail.com>
Reported-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add the obvious compatible name to the existing IR binding, and pair
it with the existing A31 fallback compatible string, as the devices
are compatible.

On the way use enums to group all compatible devices together.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.

Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().

for (n = 0; n < d->props.num_adapters; n++) {
....
	if ((ret = dvb_usb_adapter_stream_init(adap)) ||
		(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
		(ret = dvb_usb_adapter_frontend_init(adap))) {
		return ret;
	}
...
	d->num_adapters_initialized++;
...
}

In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:

	for (n = 0; n < d->num_adapters_initialized; n++)

So, allocated objects won't be freed.

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+3c2be7424cea3b932b0e@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.

Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

gcc-11 warns about the prototype not exactly matching the function
definition:

drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
  363 |                 u8 keybuf[5], u32 *event, int *state)
      |                 ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
                 from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
  490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
      |                                                                 ^~~~

Fixes: 776338e ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

An earlier commit removed a call to lgdt3306a_spectral_inversion and
omitted to remove the error return check. The check on ret is now
redundant and can be removed.

Addresses-Coverity: ("Logically dead code")

Fixes: d4a3fa6 ("media: dvb-frontends: lgdt3306a.c: remove dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The struct v4l2_subdev_format sd_fmt cannot be static since it can be
written back by the subdev. Just have it on the stack.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>