The wrappers around dma_pool_xxx should go away, so
remove the unused pci wrappers.
Prefer using dma_pool_xxx() instead of the pci wrappers
pci_pool_xxx(), and the use of pci_pool_xxx was already
removed.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>

- Use PCI_VENDOR_ID_AMCC macro instead of defining a custom macro in
  pci-xgene.c (Pali Rohár)

* remotes/lorenzo/pci/xgene:
  PCI: xgene: Use PCI_VENDOR_ID_AMCC macro

- Assign a number to each VMD controller to distinguish them in
  /proc/interrupts (Chunguang Xu)

- Don't disable VMD MSI-X remapping if IOMMU remapping is enabled (Adrian
  Huang)

- Add Kconfig dependency on !UML for allyesconfig build issue (Johannes
  Berg)

* remotes/lorenzo/pci/vmd:
  PCI: vmd: depend on !UML
  PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU
  PCI: vmd: Assign a number to each VMD controller

- Remove unneeded includes (Geert Uytterhoeven)

* pci/host/rcar:
  PCI: rcar-host: Remove unneeded includes
  PCI: rcar-ep: Remove unneeded includes

- Add Qualcomm PCIe Endpoint controller driver and DT binding (Manivannan
  Sadhasivam)

- Add qcom struct for device-specific details in match data (Prasad
  Malisetty)

- Switch pcie_1_pipe_clk_src from TCXO to pipe clock after PHY init in
  SC7280 (Prasad Malisetty)

- Add .compatible device ID for SC8180x platform (Bjorn Andersson)

* remotes/lorenzo/pci/qcom:
  PCI: qcom: Add sc8180x compatible
  PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
  PCI: qcom: Replace ops with struct pcie_cfg in pcie match data
  MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding
  PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver
  dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller

- Remove unused assignment (Krzysztof Wilczyński)

* remotes/lorenzo/pci/imx6:
  PCI: imx6: Remove unused assignment to variable ret

- Use sysfs_emit() in "show" functions instead of sprintf() to avoid buffer
  overruns (Kunihiko Hayashi)

* remotes/lorenzo/pci/endpoint:
  PCI: endpoint: Use sysfs_emit() in "show" functions

- Export dw_pcie_ep_reset_bar(), dw_pcie_link_up() so more drivers can be
  modular (Luca Ceresoli)

- Allow dra7xx host and endpoint drivers to be modules (Luca Ceresoli)

- Enable dra7xx optional external clock if present (Luca Ceresoli)

- Clean up Kconfig dependencies for PCIE_DW_HOST- and PCIE_DW_EP-based
  drivers (Andy Shevchenko)

- Remove visconti redundant dev_err() after platform_get_irq_byname()
  failure (Krzysztof Wilczyński)

- Run dwc .host_init() method before registering MSI interrupt handler so
  we have a chance to deal with pending interrupts left by bootloader
  (Bjorn Andersson)

- Serialize uniphier INTx masking/unmasking (Kunihiko Hayashi)

* remotes/lorenzo/pci/dwc:
  PCI: uniphier: Serialize INTx masking/unmasking and fix the bit operation
  PCI: dwc: Perform host_init() before registering msi
  PCI: visconti: Remove surplus dev_err() when using platform_get_irq_byname()
  PCI: dwc: Clean up Kconfig dependencies (PCIE_DW_EP)
  PCI: dwc: Clean up Kconfig dependencies (PCIE_DW_HOST)
  PCI: dra7xx: Get an optional clock
  PCI: dra7xx: Remove unused include
  PCI: dra7xx: Make it a kernel module
  PCI: dwc: Export more symbols to allow modular drivers

- Add Rockchip SoC PCIe controller DT bindings (Simon Xue)

* remotes/lorenzo/pci/dt:
  dt-bindings: rockchip: Add DesignWare based PCIe controller

- Make of_phandle_args_to_fwspec() generally available (Marc Zyngier)

- Allow matching of interrupt-maps local to interrupt controller or PCI
  device (Marc Zyngier)

- Add Apple SoC (e.g., M1) PCIe host controller driver, which enables
  access to USB type-A, Ethernet, Wi-Fi, Bluetooth devices; these require
  additional drivers of their own (Alyssa Rosenzweig)

- Add apple INTx, per-port, and MSI interrupt support (Marc Zyngier)

- Configure apple Requester-ID-to-Stream-ID mapper for IOMMU (DART) support
  (Marc Zyngier)

* remotes/lorenzo/pci/apple:
  PCI: apple: Configure RID to SID mapper on device addition
  iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
  PCI: apple: Implement MSI support
  PCI: apple: Add INTx and per-port interrupt support
  PCI: apple: Set up reference clocks when probing
  PCI: apple: Add initial hardware bring-up
  PCI: of: Allow matching of an interrupt-map local to a PCI device
  of/irq: Allow matching of an interrupt-map local to an interrupt controller
  irqdomain: Make of_phandle_args_to_fwspec() generally available

- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)

- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)

- Downgrade PIO Response Status messages to debug level (Marek Behún)

- Preserve CRS SV (Config Request Retry Software Visibility) bit in
  emulated Root Control register (Pali Rohár)

- Fix issue in configuring reference clock (Pali Rohár)

- Don't clear status bits for masked interrupts (Pali Rohár)

- Don't mask unused interrupts (Pali Rohár)

- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)

- Retry config accesses on CRS response (Pali Rohár)

- Simplify emulated Root Capabilities initialization (Pali Rohár)

- Fix several link training issues (Pali Rohár)

- Fix link-up checking via LTSSM (Pali Rohár)

- Fix reporting of Data Link Layer Link Active (Pali Rohár)

* remotes/lorenzo/pci/aardvark:
  PCI: aardvark: Fix reporting Data Link Layer Link Active
  PCI: aardvark: Fix checking for link up via LTSSM state
  PCI: aardvark: Fix link training
  PCI: aardvark: Simplify initialization of rootcap on virtual bridge
  PCI: aardvark: Implement re-issuing config requests on CRS response
  PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()
  PCI: aardvark: Do not unmask unused interrupts
  PCI: aardvark: Do not clear status bits of masked interrupts
  PCI: aardvark: Fix configuring Reference clock
  PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge
  PCI: aardvark: Don't spam about PIO Response Status
  PCI: aardvark: Fix PCIe Max Payload Size setting
  PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros

- Tidy setup-irq.c comments (Pranay Sanghai)

- Fix misspellings (Krzysztof Wilczyński)

- Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński)

- Tidy cpqphp code formatting (Krzysztof Wilczyński)

* pci/misc:
  PCI: cpqphp: Format if-statement code block correctly
  PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()
  PCI: hv: Remove unnecessary use of %hx
  PCI: Correct misspelled and remove duplicated words
  PCI: Tidy comments

- Add pci_read_vpd_any(), pci_write_vpd_any() to access VPD at arbitrary
  offsets (Heiner Kallweit)

- Use VPD API to replace custom code in cxgb3 driver (Heiner Kallweit)

* pci/vpd:
  cxgb3: Remove seeprom_write and use VPD API
  cxgb3: Use VPD API in t3_seeprom_wp()
  cxgb3: Remove t3_seeprom_read and use VPD API
  PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size()
  PCI/VPD: Add pci_read/write_vpd_any()

- Avoid bus resets on Atheros QCA6174, since they hang (Ingmar Klein)

- Use store and forward mode on Pericom PI7C9X2G switches to avoid ACS
  erratum with ACS P2P Request Redirect (Nathan Rossi)

* pci/virtualization:
  PCI: Add ACS quirk for Pericom PI7C9X2G switches
  PCI: Mark Atheros QCA6174 to avoid bus reset

- Check for CAP_SYS_ADMIN before validating sysfs user input, not after
  (Krzysztof Wilczyński)

- Always return -EINVAL from sysfs "store" functions for invalid user input
  instead of -EINVAL sometimes and -ERANGE others (Krzysztof Wilczyński)

- Use kstrtobool() directly instead of the strtobool() wrapper (Krzysztof
  Wilczyński)

* pci/sysfs:
  PCI: Use kstrtobool() directly, sans strtobool() wrapper
  PCI/sysfs: Return -EINVAL consistently from "store" functions
  PCI/sysfs: Check CAP_SYS_ADMIN before parsing user input

# Conflicts:
#	drivers/pci/iov.c

- Return error to application when command execution fails because an
  out-of-band reset has cleared the device BARs, Memory Space Enable, etc
  (Kelvin Cao)

- Fix MRPC error status handling issue (Kelvin Cao)

- Mask out other bits when reading of management VEP instance ID (Kelvin
  Cao)

- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin
  Cao)

- Add check of event support (Logan Gunthorpe)

* pci/switchtec:
  PCI/switchtec: Add check of event support
  PCI/switchtec: Replace ENOTSUPP with EOPNOTSUPP
  PCI/switchtec: Update the way of getting management VEP instance ID
  PCI/switchtec: Fix a MRPC error status handling issue
  PCI/switchtec: Error out MRPC execution when MMIO reads fail

- Coalesce host bridge contiguous apertures to allow P2P bridge windows
  that span several contiguous host bridge apertures (Kai-Heng Feng)

* pci/resource:
  PCI: Coalesce host bridge contiguous apertures

- Don't setup portdrv IRQs if there are no port drivers that use them, to
  conserve vectors and avoid spurious events (Jan Kiszka)

* pci/portdrv:
  PCI/portdrv: Do not setup up IRQs if there are no users

- Apply bus offset correctly in DMA address calculation, which used the
  wrong sign before (Wang Lu)

* pci/p2pdma:
  PCI/P2PDMA: Apply bus offset correctly in DMA address calculation

- Ignore Link Down/Up caused by error-induced Hot Reset so endpoint driver
  can remain bound to device during error recovery (Lukas Wunner)

- Remove unused resume err_handler (Lukas Wunner)

- Remove unused pcie_port_bus_{,un}register() declarations (Lukas Wunner)

- Skip compiling err.c when CONFIG_PCIEAER not set (Lukas Wunner)

* pci/hotplug:
  PCI/ERR: Reduce compile time for CONFIG_PCIEAER=n
  PCI/portdrv: Remove unused pcie_port_bus_{,un}register() declarations
  PCI/portdrv: Remove unused resume err_handler
  PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot Reset
  PCI/portdrv: Rename pm_iter() to pcie_port_device_iter()

- Drop the struct pci_dev.driver pointer, which is redundant with the
  struct device.driver pointer (Uwe Kleine-König)

* pci/driver:
  PCI: Remove struct pci_dev->driver
  PCI: Use to_pci_driver() instead of pci_dev->driver
  x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver
  perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver
  powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver
  usb: xhci: Use to_pci_driver() instead of pci_dev->driver
  cxl: Use to_pci_driver() instead of pci_dev->driver
  cxl: Factor out common dev->driver expressions
  xen/pcifront: Use to_pci_driver() instead of pci_dev->driver
  xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv
  nfp: use dev_driver_string() instead of pci_dev->driver->name
  mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name
  net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name
  net: hns3: use dev_driver_string() instead of pci_dev->driver->name
  crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name
  powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name
  ssb: Use dev_driver_string() instead of pci_dev->driver->name
  bcma: simplify reference to driver name
  crypto: qat - simplify adf_enable_aer()
  scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter
  PCI/ERR: Factor out common dev->driver expressions
  PCI: Drop pci_device_probe() test of !pci_dev->driver
  PCI: Drop pci_device_remove() test of pci_dev->driver
  PCI: Return NULL for to_pci_driver(NULL)

- Rename pcibios_add_device() to pcibios_device_add() since it's called
  from pci_device_add() (Oliver O'Halloran)

- Don't try to enable AtomicOps on VFs, since they can only be enabled on
  the PF (Selvin Xavier)

* pci/enumeration:
  PCI: Do not enable AtomicOps on VFs
  PCI: Rename pcibios_add_device() to pcibios_device_add()

- Simplify _OSC negotiation with platform for control of PCIe features
  (Joerg Roedel)

* pci/acpi:
  PCI/ACPI: Check for _OSC support in acpi_pci_osc_control_set()
  PCI/ACPI: Move _OSC query checks to separate function
  PCI/ACPI: Move supported and control calculations to separate functions
  PCI/ACPI: Remove OSC_PCI_SUPPORT_MASKS and OSC_PCI_CONTROL_MASKS

The sole non-static function in err.c, pcie_do_recovery(), is only
called from:

* aer.c (if CONFIG_PCIEAER=y)
* dpc.c (if CONFIG_PCIE_DPC=y, which depends on CONFIG_PCIEAER)
* edr.c (if CONFIG_PCIE_EDR=y, which depends on CONFIG_PCIE_DPC)

Thus, err.c need not be compiled if CONFIG_PCIEAER=n.

Also, pci_uevent_ers() and pcie_clear_device_status(), which are called
from err.c, can be #ifdef'ed away unless CONFIG_PCIEAER=y.

Since x86_64_defconfig doesn't enable CONFIG_PCIEAER, this change may
slightly reduce compile time for anyone doing a test build with that
config.

Link: https://lore.kernel.org/r/98f9041151268c1c035ab64cca320ad86803f64a.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Commit c6c889d ("PCI/portdrv: Remove pcie_port_bus_type link order
dependency") removed pcie_port_bus_{,un}register() but erroneously
retained their declarations in portdrv.h.  Remove them as well.

Link: https://lore.kernel.org/r/7fd76b0591c37287ab94d911d8fd9ab9a2afcd16.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Commit 3e41a31 ("PCI/AER: Remove unused aer_error_resume()")
removed the resume err_handler from AER.  Since no other port service
implements the callback, support for it can be removed from portdrv.
It can be revived later if need be, preferably by re-using the
pcie_port_device_iter() iterator.

Link: https://lore.kernel.org/r/25334149b604e005058aeb0fdf51e01f991d5d74.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Keith Busch <kbusch@kernel.org>

Stuart Hayes reports that an error handled by DPC at a Root Port results
in pciehp gratuitously bringing down a subordinate hotplug port:

  RP -- UP -- DP -- UP -- DP (hotplug) -- EP

pciehp brings the slot down because the Link to the Endpoint goes down.
That is caused by a Hot Reset being propagated as a result of DPC.
Per PCIe Base Spec 5.0, section 6.6.1 "Conventional Reset":

  For a Switch, the following must cause a hot reset to be sent on all
  Downstream Ports: [...]

  * The Data Link Layer of the Upstream Port reporting DL_Down status.
    In Switches that support Link speeds greater than 5.0 GT/s, the
    Upstream Port must direct the LTSSM of each Downstream Port to the
    Hot Reset state, but not hold the LTSSMs in that state. This permits
    each Downstream Port to begin Link training immediately after its
    hot reset completes. This behavior is recommended for all Switches.

  * Receiving a hot reset on the Upstream Port.

Once DPC recovers, pcie_do_recovery() walks down the hierarchy and
invokes pcie_portdrv_slot_reset() to restore each port's config space.
At that point, a hotplug interrupt is signaled per PCIe Base Spec r5.0,
section 6.7.3.4 "Software Notification of Hot-Plug Events":

  If the Port is enabled for edge-triggered interrupt signaling using
  MSI or MSI-X, an interrupt message must be sent every time the logical
  AND of the following conditions transitions from FALSE to TRUE: [...]

  * The Hot-Plug Interrupt Enable bit in the Slot Control register is
    set to 1b.

  * At least one hot-plug event status bit in the Slot Status register
    and its associated enable bit in the Slot Control register are both
    set to 1b.

Prevent pciehp from gratuitously bringing down the slot by clearing the
error-induced Data Link Layer State Changed event before restoring
config space.  Afterwards, check whether the link has unexpectedly
failed to retrain and synthesize a DLLSC event if so.

Allow each pcie_port_service_driver (one of them being pciehp) to define
a slot_reset callback and re-use the existing pm_iter() function to
iterate over the callbacks.

Thereby, the Endpoint driver remains bound throughout error recovery and
may restore the device to working state.

Surprise removal during error recovery is detected through a Presence
Detect Changed event.  The hotplug port is expected to not signal that
event as a result of a Hot Reset.

The issue isn't DPC-specific, it also occurs when an error is handled by
AER through aer_root_reset().  So while the issue was noticed only now,
it's been around since 2006 when AER support was first introduced.

[bhelgaas: drop PCI_ERROR_RECOVERY Kconfig, split pm_iter() rename to
preparatory patch]
Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/
Fixes: 6c2b374 ("PCI-Express AER implemetation: AER core and aerdriver")
Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de
Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.19+: ba95282: PCI/portdrv: Report reset for frozen channel
Cc: Keith Busch <kbusch@kernel.org>

Rename pm_iter() to pcie_port_device_iter() and make it visible outside
CONFIG_PM and portdrv_core.c so it can be used for pciehp slot reset
recovery.

[bhelgaas: split into its own patch]
Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/
Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

There are no remaining uses of the struct pci_dev->driver pointer, so
remove it.

Link: https://lore.kernel.org/r/20211004125935.2300113-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pci_dev->driver with to_pci_driver().  This is a step toward
removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>