Add the vendor commands that must be used by the network manager
to allow proper operation of iwlmei.

* Send information on the AP CSME is connected to
* Notify the userspace when roaming is forbidden
* Allow the userspace to require ownership

Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

iwlmei allows to integrate with the CSME firmware. There are
flows that are prioprietary for this purpose:

* Get the information the AP, the CSME firmware is connected
  to. This is useful when we need to speed up the connection
  process in case the CSME firmware has an TCP connection
  that must be kept alive across the ownership transition.
* Forbid roaming, which will happen when the CSME firmware
  wants to tell the user space not disrupt the connection.
* Request ownership, upon driver boot when the CSME firmware
  owns the device.

Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

iwlmei needs to know about the follwing events:

* Association
* De-association
* Country Code change
* SW Rfkill change
* SAR table changes

iwlmei can take the device away from us, so report the new
rfkill type when this happens.
Advertise the required data from the CSME firmware to the
usersapce: mostly, the AP that the CSME firmware is currently
associated to in case there is an active link protection
session.
Generate the HOST_ASSOC / HOST_DISSASSOC messages.

Don't support WPA1 (non-RSNA) for now.
Don't support shared wep either.
We can then determine the AUTH parameter by checking the AKM.
Feed the cipher from the key installation.

SW Rfkill will be implemented later when cfg80211 will
allow us to read the SW Rfkill state.

Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

iwlmei is a driver that handles the communication with the
Wireless driver of the CSME firmware.
More details in the documentation included in this patch.

Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

One USB data buffer can contain multiple received network
packets. If that's the case, they're processed this way:
1. Original buffer is cloned
2. Original buffer is trimmed to contain only the first
   network packet
3. This first network packet is passed to network stack
4. Cloned buffer is trimmed to eliminate the first network
   packet
5. Repeat with the cloned buffer until there are no more
   network packets inside

However, if the space remaining in original buffer after
the first network packet is not enough to contain at least
another network packet descriptor, it is not cloned.

The loop parsing this packets ended if remaining space == 0.
But if the remaining space was > 0 but < packet descriptor
size, another iteration of the loop was done, processing again
the previous packet because cloning didn't happen. Moreover,
the ownership of this packet had been passed to network
stack in the previous iteration.

This patch ensures that no extra iteration is done if the
remaining size is not enough for one packet, and also avoid
the first iteration for the same reason.

Probably this doesn't happen in practice, but can happen
theoretically.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511071926.8951-1-ihuguet@redhat.com

Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.

Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com

…reless into pending

mt76 patches for 5.14

* mt7915 MSI support
* disable ASPM on mt7915
* mt7915 tx status reporting
* mt7921 decap offload
* driver fixes
* cleanups
* mt7921 runtime power management improvements
* testmode improvements/fixes
* runtime PM improvements

Disable chip full reset just during device probing but allow
it during hw restart.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Set macwork timeout value according to runtime-pm in order to reduce
power consumption

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Allow the user to enable runtime-pm for mt7663s driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

…path

Similar to mt7663e, rely on mt76_connac_pm_ref/mt76_connac_pm_unref to
check PM state and increment/decrement wake counter

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

As already done for mt7921 and mt7663e, rely on pm reference counting in
drv/fw_own

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to support runtime-pm for sdio, do not run mt76_txq_schedule
directly, but schedule tx_worker instead

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Enables HE MU/SU beamformee functionality

Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Disable TWT REQ/RES mac capabilities since TWT is not supported
yet in mt7915/mt7921.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The iv from RXD is only for TKIP_RSC/CCMP_PN/GCMP_PN, and it needs a
check for CCMP header insertion. Move mt76_cipher_type to mt76.h to
reduce duplicated code.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the maximum size of the coredump generated with current mt7921
firmware. Otherwise, a truncated coredump would be reported to userland
via dev_coredumpv.

Also, there is an additional error handling enhanced in the patch to avoid
the possible invalid buffer access when the system failed to create the
buffer to hold the coredump.

Fixes: 0da3c79 ("mt76: mt7921: add coredump support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

ieee80211_disconnect is only called for the staton mode.

[  714.050429] WARNING: CPU: 1 PID: 382 at net/mac80211/mlme.c:2787
ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.116704] Hardware name: MediaTek Asurada rev1 board (DT)
[  714.122303] Workqueue: mt76 mt7921_mac_reset_work [mt7921e]
[  714.127877] pstate: 20c00009 (nzCv daif +PAN +UAO)
[  714.132761] pc : ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.138430] lr : mt7921_vif_connect_iter+0x28/0x54 [mt7921e]
[  714.144083] sp : ffffffc0107cbbd0
[  714.147394] x29: ffffffc0107cbbd0 x28: ffffffb26c9cb928
[  714.152706] x27: ffffffb26c9cbd98 x26: 0000000000000000
[  714.158017] x25: 0000000000000003 x24: ffffffb26c9c9c38
[  714.163328] x23: ffffffb26c9c9c38 x22: ffffffb26c9c8860
[  714.168639] x21: ffffffb23b940000 x20: ffffffb26c9c8860
[  714.173950] x19: 0000000000000001 x18: 000000000000b67e
[  714.179261] x17: 00000000064dd409 x16: ffffffd739cb28f0
[  714.184571] x15: 0000000000000000 x14: 0000000000000227
[  714.189881] x13: 0000000000000400 x12: ffffffd73a4eb060
[  714.195191] x11: 0000000000000000 x10: 0000000000000000
[  714.200502] x9 : ffffffd703a0a000 x8 : 0000000000000006
[  714.205812] x7 : 2828282828282828 x6 : ffffffb200440396
[  714.211122] x5 : 0000000000000000 x4 : 0000000000000004
[  714.216432] x3 : 0000000000000000 x2 : ffffffb23b940c90
[  714.221743] x1 : 0000000000000001 x0 : ffffffb23b940c90
[  714.227054] Call trace:
[  714.229594]  ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.234913]  mt7921_vif_connect_iter+0x28/0x54 [mt7921e]
[  714.240313]  __iterate_interfaces+0xc4/0xdc [mac80211]
[  714.245541]  ieee80211_iterate_interfaces+0x4c/0x68 [mac80211]
[  714.251381]  mt7921_mac_reset_work+0x410/0x468 [mt7921e]
[  714.256696]  process_one_work+0x208/0x3c8
[  714.260706]  worker_thread+0x23c/0x3e8
[  714.264456]  kthread+0x140/0x17c
[  714.267685]  ret_from_fork+0x10/0x18

Fixes: 0c1ce98 ("mt76: mt7921: add wifi reset support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce ds_enable switch to fully control fw deep_sleep capability

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Limit tx power for single-sku according to userlevel power.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mt7921_update_txs routine in order to improve code readability
for tx timestamp parsing/configuration.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add addtional the deep sleep control to runtime-pm knob to
allow us to control driver switching between the full power
mode and the deep sleep mode the firmware is able to support.

Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Enable the deep sleep mode with that firmware is able to trap into
the doze state at runtime to reduce the power consumption further.

The deep sleep mode is not allowed in the STA state transition with
the firmware to have the fast connection experience as we've done in
the full power mode

Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The value of station mode is always 0.

Fixed: 00b2e16 ("mt76: mt7915: add TxBF capabilities")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

header files should use '/* SPDX ... */
Change from c file comment syle to header style

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

checkpatch expects a space between '#' and 'SPDX...'
Add a space.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

- Adjust starec flow since VHT MU group is only updated by starec_vht
  follows starec_bf settings.
- Drop unnecessary MU BF checks.

TX MPDU PER (Status = Success):
                                           TOT_MPDU_CNT  FAIL_MPDU_CNT  TX_PER
WCID Rate
1      VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF              114              0   0.00%
       VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF_MU            64              0   0.00%
       VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF              128              0   0.00%
       VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF_MU           745              0   0.00%
       VHT_BW80_2SS_MCS8_LGI_LDPC_MUBF_MU           856              0   0.00%
       VHT_BW80_2SS_MCS8_SGI_LDPC_MUBF_MU          1430              4   0.28%
       VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF_MU          5220             31   0.59%
       VHT_BW80_2SS_MCS9_LGI_LDPC_iBF                59              0   0.00%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF               64              2   3.12%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF_MU         22132             76   0.34%
       VHT_BW80_2SS_MCS9_SGI_LDPC_iBF              2866              1   0.03%
2      VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF_MU          3781              5   0.13%
       VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF_MU           735              0   0.00%
       VHT_BW80_2SS_MCS8_LGI_LDPC_MUBF_MU          1270            365  28.74%
       VHT_BW80_2SS_MCS8_SGI_LDPC_MUBF_MU          3420             57   1.67%
       VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF              128              0   0.00%
       VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF_MU            64              0   0.00%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF              191              0   0.00%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF_MU         18833            320   1.70%
       VHT_BW80_2SS_MCS9_SGI_LDPC_iBF              6040              0   0.00%
287    OFDM 6M

Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use mt7915_mcu_set_txbf() to reduce global functions. This can be
easily extended to support other TxBF commands in further patches.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reduce duplicated survey for DBDC.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

There are firmware or hardware issues, which are currently causing tx hangs
when attempting to use these interfaces

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Check device band capabilities before configuring single-sku

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to remove duplicated code, move mt76_get_next_pkt_id routine
in mt76.h

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reduce rx buffer size to 2048 for mt7921/mt7915/mt7615 since we
now support rx amsdu offload

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Maximum interval (in seconds) for schedule scan plan supported by
the offload firmware can be U16_MAX.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

FCS error packets are filtered by default and won't be reported to
driver, so that RX fcs error and PER in testmode always show zero.
Fix this issue by reading fcs error count from hw counter.

We did't fix this issue by disabling fcs error rx filter since it may
let HW suffer some SER errors.

Fixes: 5d8a83f ("mt76: mt7915: implement testmode rx support")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>