Skip to content
Permalink
Guoqing-Jiang/…
Switch branches/tags

Commits on Aug 23, 2021

  1. raid1: ensure write behind bio has less than BIO_MAX_VECS sectors 

    We can't split write behind bio with more than BIO_MAX_VECS sectors,
otherwise the below call trace was triggered because we could allocate
oversized write behind bio later.

[ 8.097936] bvec_alloc+0x90/0xc0
[ 8.098934] bio_alloc_bioset+0x1b3/0x260
[ 8.099959] raid1_make_request+0x9ce/0xc50 [raid1]
[ 8.100988] ? __bio_clone_fast+0xa8/0xe0
[ 8.102008] md_handle_request+0x158/0x1d0 [md_mod]
[ 8.103050] md_submit_bio+0xcd/0x110 [md_mod]
[ 8.104084] submit_bio_noacct+0x139/0x530
[ 8.105127] submit_bio+0x78/0x1d0
[ 8.106163] ext4_io_submit+0x48/0x60 [ext4]
[ 8.107242] ext4_writepages+0x652/0x1170 [ext4]
[ 8.108300] ? do_writepages+0x41/0x100
[ 8.109338] ? __ext4_mark_inode_dirty+0x240/0x240 [ext4]
[ 8.110406] do_writepages+0x41/0x100
[ 8.111450] __filemap_fdatawrite_range+0xc5/0x100
[ 8.112513] file_write_and_wait_range+0x61/0xb0
[ 8.113564] ext4_sync_file+0x73/0x370 [ext4]
[ 8.114607] __x64_sys_fsync+0x33/0x60
[ 8.115635] do_syscall_64+0x33/0x40
[ 8.116670] entry_SYSCALL_64_after_hwframe+0x44/0xae

Thanks for the comment from Christoph.

[1]. https://bugs.archlinux.org/task/70992

Reported-by: Jens Stutte <jens@chianterastutte.eu>
Tested-by: Jens Stutte <jens@chianterastutte.eu>
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
    @intel-lab-lkp
    Guoqing Jiang authored and intel-lab-lkp committed Aug 23, 2021
    302a06a

Commits on Aug 10, 2021

  1. xen-blkfront: Remove redundant assignment to variable err 

    The variable err is being assigned a value that is never read, the
assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210806110601.11386-1-colin.king@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Colin Ian King authored and axboe committed Aug 10, 2021
    da20b58

Commits on Aug 2, 2021

  1. block/rnbd: Use sysfs_emit instead of s*printf function for sysfs show 

    sysfs_emit function was added to be aware of the PAGE_SIZE maximum of
the temporary buffer used for outputting sysfs content, so there is no
possible overruns. So replace the uses of any s*printf functions for
the sysfs show functions with sysfs_emit.

Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20210726115950.470543-3-jinpu.wang@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Md Haris Iqbal authored and axboe committed Aug 2, 2021
    3087b33

  2. block/rnbd-clt: Use put_cpu_ptr after get_cpu_ptr 

    This patch replaces put_cpu_var with put_cpu_ptr because
get_cpu_ptr should be paired with put_cpu_ptr.

Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20210726115950.470543-2-jinpu.wang@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Gioh Kim authored and axboe committed Aug 2, 2021
    94dace8

  3. block: remove blk-mq-sysfs dead code 

    In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to
define any attribute since the "mq" sysfs directory contains only
sub-directories (no attribute files). As a result, blk_mq_sysfs_show(),
blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all
unused and unnecessary. Remove all this unused code.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @damien-lemoal @axboe
    damien-lemoal authored and axboe committed Aug 2, 2021
    2bc1f6e

  4. loop: raise media_change event 

    Make the loop device raise a DISK_MEDIA_CHANGE event on attach or detach.

	# udevadm monitor -up |grep -e DISK_MEDIA_CHANGE -e DEVNAME &

	# losetup -f zero
	[    7.454235] loop0: detected capacity change from 0 to 16384
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop0
	DEVNAME=/dev/loop0
	DEVNAME=/dev/loop0

	# losetup -f zero
	[   10.205245] loop1: detected capacity change from 0 to 16384
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop1
	DEVNAME=/dev/loop1
	DEVNAME=/dev/loop1

	# losetup -f zero2
	[   13.532368] loop2: detected capacity change from 0 to 40960
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop2
	DEVNAME=/dev/loop2

	# losetup -D
	DEVNAME=/dev/loop1
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop1
	DEVNAME=/dev/loop2
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop2
	DEVNAME=/dev/loop0
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop0

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-7-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @teknoraver @axboe
    teknoraver authored and axboe committed Aug 2, 2021
    9f65c48

  5. block: add a helper to raise a media changed event 

    Refactor disk_check_events() and move some code into disk_event_uevent().
Then add disk_force_media_change(), a helper which will be used by
devices to force issuing a DISK_EVENT_MEDIA_CHANGE event.

Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-6-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @teknoraver @axboe
    teknoraver authored and axboe committed Aug 2, 2021
    e6138dc

  6. block: export diskseq in sysfs 

    Add a new sysfs handle to export the new diskseq value.
Place it in <sysfs>/block/<disk>/diskseq and document it.

    $ grep . /sys/class/block/*/diskseq
    /sys/class/block/loop0/diskseq:13
    /sys/class/block/loop1/diskseq:14
    /sys/class/block/loop2/diskseq:5
    /sys/class/block/loop3/diskseq:6
    /sys/class/block/ram0/diskseq:1
    /sys/class/block/ram1/diskseq:2
    /sys/class/block/vda/diskseq:7

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @teknoraver @axboe
    teknoraver authored and axboe committed Aug 2, 2021
    13927b3

  7. block: add ioctl to read the disk sequence number 

    Add a new BLKGETDISKSEQ ioctl which retrieves the disk sequence number
from the genhd structure.

    # ./getdiskseq /dev/loop*
    /dev/loop0:     13
    /dev/loop0p1:   13
    /dev/loop0p2:   13
    /dev/loop0p3:   13
    /dev/loop1:     14
    /dev/loop1p1:   14
    /dev/loop1p2:   14
    /dev/loop2:     5
    /dev/loop3:     6

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-4-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @teknoraver @axboe
    teknoraver authored and axboe committed Aug 2, 2021
    7957d93

  8. block: export the diskseq in uevents 

    Export the newly introduced diskseq in uevents:

    $ udevadm info /sys/class/block/* |grep -e DEVNAME -e DISKSEQ
    E: DEVNAME=/dev/loop0
    E: DISKSEQ=1
    E: DEVNAME=/dev/loop1
    E: DISKSEQ=2
    E: DEVNAME=/dev/loop2
    E: DISKSEQ=3
    E: DEVNAME=/dev/loop3
    E: DISKSEQ=4
    E: DEVNAME=/dev/loop4
    E: DISKSEQ=5
    E: DEVNAME=/dev/loop5
    E: DISKSEQ=6
    E: DEVNAME=/dev/loop6
    E: DISKSEQ=7
    E: DEVNAME=/dev/loop7
    E: DISKSEQ=8
    E: DEVNAME=/dev/nvme0n1
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p1
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p2
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p3
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p4
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p5
    E: DISKSEQ=9
    E: DEVNAME=/dev/sda
    E: DISKSEQ=10
    E: DEVNAME=/dev/sda1
    E: DISKSEQ=10
    E: DEVNAME=/dev/sda2
    E: DISKSEQ=10

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-3-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @teknoraver @axboe
    teknoraver authored and axboe committed Aug 2, 2021
    87eb710

  9. block: add disk sequence number 

    Associating uevents with block devices in userspace is difficult and racy:
the uevent netlink socket is lossy, and on slow and overloaded systems
has a very high latency.
Block devices do not have exclusive owners in userspace, any process can
set one up (e.g. loop devices). Moreover, device names can be reused
(e.g. loop0 can be reused again and again). A userspace process setting
up a block device and watching for its events cannot thus reliably tell
whether an event relates to the device it just set up or another earlier
instance with the same name.

Being able to set a UUID on a loop device would solve the race conditions.
But it does not allow to derive orderings from uevents: if you see a
uevent with a UUID that does not match the device you are waiting for,
you cannot tell whether it's because the right uevent has not arrived yet,
or it was already sent and you missed it. So you cannot tell whether you
should wait for it or not.

Associating a unique, monotonically increasing sequential number to the
lifetime of each block device, which can be retrieved with an ioctl
immediately upon setting it up, allows to solve the race conditions with
uevents, and also allows userspace processes to know whether they should
wait for the uevent they need or if it was dropped and thus they should
move on.

Additionally, increment the disk sequence number when the media change,
i.e. on DISK_EVENT_MEDIA_CHANGE event.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-2-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @teknoraver @axboe
    teknoraver authored and axboe committed Aug 2, 2021
    cf17994

  10. block: remove cmdline-parser.c 

    cmdline-parser.c is only used by the cmdline faux partition format,
so merge the code into that and avoid an indirect call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    2164877

  11. block: remove disk_name() 

    Remove the disk_name function now that all users are gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    abd2864

  12. block: simplify disk name formatting in check_partition 

    disk_name for partition 0 just copies out the disk_name field.  Replace
the call to disk_name with a %s format specifier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    1d70354

  13. block: simplify printing the device names disk_stack_limits 

    Printk ->disk_name directly for the disk and use the %pg format specifier
for the block device, which is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    453b8ab

  14. block: use the %pg format specifier in show_partition 

    Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    a291bb4

  15. block: use the %pg format specifier in printk_all_partitions 

    Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    a9e7bc3

  16. block: reduce stack usage in diskstats_show 

    I have compiled the kernel with a cross compiler "hppa-linux-gnu-" v9.3.0
on x86-64 host machine. I got the following warning:

block/genhd.c: In function ‘diskstats_show’:
block/genhd.c:1227:1: warning: the frame size of 1688 bytes is larger
than 1280 bytes [-Wframe-larger-than=]
 1227  |  }

By Reduced the stack footprint by using the %pg printk specifier instead
of disk_name to remove the need for the on-stack buffer.

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Abd-Alrhman Masalkhi authored and axboe committed Aug 2, 2021
    26e2d7a

  17. block: remove bdput 

    Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    2f4731d

  18. block: remove bdgrab 

    All callers are gone, and no one should grab a pure inode reference to
a block device anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210722075402.983367-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    14cf1db

  19. loop: don't grab a reference to the block device 

    The whole device block device won't be removed while the disk is still
alive, so don't bother to grab a reference to it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@rehat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    4b27312

  20. block: change the refcounting for partitions 

    Instead of acquiring an inode reference on open make sure partitions
always hold device model references to the disk while alive, and switch
open to grab only a device model reference to the opened block device.
If that is a partition the disk reference is transitively held by the
partition already.

Link: https://lore.kernel.org/r/20210722075402.983367-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    9d3b881

  21. block: allocate bd_meta_info later in add_partitions 

    Move the allocation of bd_meta_info after initializing the struct device
to avoid the special bdput error handling path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    0468c53

  22. block: unhash the whole device inode earlier 

    Unhash the whole device inode early in del_gendisk.  This allows to
remove the first GENHD_FL_UP check in the open path as we simply
won't find a just removed inode.  The second non-racy check after
taking open_mutex is still kept.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210722075402.983367-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    d7a6657

  23. block: assert the locking state in delete_partition 

    Add a lockdep assert instead of the outdated locking comment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    a45e43c

  24. block: use bvec_kmap_local in bio_integrity_process 

    Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    503469b

  25. block: use bvec_kmap_local in t10_pi_type1_{prepare,complete} 

    Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    8aec120

  26. block: use memcpy_from_bvec in __blk_queue_bounce 

    Rewrite the actual bounce buffering loop in __blk_queue_bounce to that
the memcpy_to_bvec helper can be used to perform the data copies.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    4aebe85

  27. block: use memcpy_from_bvec in bio_copy_kern_endio_read 

    Use memcpy_from_bvec instead of open coding the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    d24920e

  28. block: use memcpy_to_bvec in copy_to_high_bio_irq 

    Use memcpy_to_bvec instead of opencoding the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    f434cdc

  29. block: rewrite bio_copy_data_iter to use bvec_kmap_local and memcpy_t… 

    …o_bvec

Use the proper helpers instead of open coding the copy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    f8b679a

  30. block: remove bvec_kmap_irq and bvec_kunmap_irq 

    These two helpers are entirely unused now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    bda135d

  31. ps3disk: use memcpy_{from,to}_bvec 

    Use the bvec helpers instead of open coding the copy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20210727055646.118787-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    6e0a485

  32. dm-writecache: use bvec_kmap_local instead of bvec_kmap_irq 

    There is no need to disable interrupts in bio_copy_block, and the local
only mappings helps to avoid any sort of problems with stray writes
into the bio data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    18a6234

  33. rbd: use memzero_bvec 

    Use memzero_bvec instead of reimplementing it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
    @axboe
    Christoph Hellwig authored and axboe committed Aug 2, 2021
    732022b
Older