A code in iomap alloc may overblock block number when converting it to
byte offset. Luckily this is mostly harmless as we will just use more
expensive method of writing using unwritten extents even though we are
writing beyond i_size.

Fixes: 378f32b ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>

Eric has noticed that after pagecache read rework, generic/418 is
occasionally failing for ext4 when blocksize < pagesize. In fact, the
pagecache rework just made hard to hit race in ext4 more likely. The
problem is that since ext4 conversion of direct IO writes to iomap
framework (commit 378f32b), we update inode size after direct IO
write only after invalidating page cache. Thus if buffered read sneaks
at unfortunate moment like:

CPU1 - write at offset 1k                       CPU2 - read from offset 0
iomap_dio_rw(..., IOMAP_DIO_FORCE_WAIT);
                                                ext4_readpage();
ext4_handle_inode_extension()

the read will zero out tail of the page as it still sees smaller inode
size and thus page cache becomes inconsistent with on-disk contents with
all the consequences.

Fix the problem by moving inode size update into end_io handler which
gets called before the page cache is invalidated.

Reported-by: Eric Whitney <enwlinux@gmail.com>
Fixes: 378f32b ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>

When extending a file with direct IO write, ext4 needs to know whether IO
has succeeded for the whole range that was prepared for it (the common fast
path). In that case we can piggy back the orphan list update with the
inode size update. In case write was actually shorter than originally
intended, we must leave inode on the orphan list until we cleanup blocks
beyond i_size. So provide the original IO size to the direct IO ->end_io
handler.

Signed-off-by: Jan Kara <jack@suse.cz>

Using no_printk() for jbd_debug() revealed two warnings:

fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:256:30: error: format '%d' expects a matching 'int' argument [-Werror=format=]
  256 |                 jbd_debug(3, "Processing fast commit blk with seq %d");
      |                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ext4/fast_commit.c: In function 'ext4_fc_replay_add_range':
fs/ext4/fast_commit.c:1732:30: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
 1732 |                 jbd_debug(1, "Converting from %d to %d %lld",

The first one was added incorrectly, and was also missing a few newlines
in debug output, and the second one happened when the type of an
argument changed.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: d556435 ("jbd2: avoid -Wempty-body warnings")
Fixes: 6db0746 ("ext4: use BIT() macro for BH_** state bits")
Fixes: 5b849b5 ("jbd2: fast commit recovery path")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210409201211.1866633-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Made suggested modifications from checkpatch in reference to ERROR:
 trailing whitespace

Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20210409042035.15516-1-jack.qiu@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/cover.1616840203.git.unixbhaskar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

In case of if not ext4_fc_add_tlv branch, an error return code is missing.

Cc: stable@kernel.org
Fixes: aa75f4d ("ext4: main fast-commit commit path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Yihang <xuyihang@huawei.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210408070033.123047-1-xuyihang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Assertion checks in jbd2_journal_dirty_metadata() are known to be racy
but we don't want to be grabbing locks just for them.  We thus recheck
them under b_state_lock only if it looks like they would fail. Annotate
the checks with data_race().

Cc: stable@kernel.org
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210406161804.20150-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Access to journal->j_running_transaction is not protected by appropriate
lock and thus is racy. We are well aware of that and the code handles
the race properly. Just add a comment and data_race() annotation.

Cc: stable@kernel.org
Reported-by: syzbot+30774a6acf6a2cf6d535@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210406161804.20150-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Fix As write_mmp_block() so that it returns -EIO instead of 1, so that
the correct error gets saved into the superblock.

Cc: stable@kernel.org
Fixes: 54d3adb ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Liu Zhi Qiang <liuzhiqiang26@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210406025331.148343-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

We should set the error code when ext4_commit_super check argument failed.
Found in code review.
Fixes: c4be0c1 ("filesystem freeze: add error handling of write_super_lockfs/unlockfs").

Cc: stable@kernel.org
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210402101631.561-1-changfengnan@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Before commit 014c9ca ("ext4: make ext4_abort() use
__ext4_error()"), the following series of commands would trigger a
panic:

1. mount /dev/sda -o ro,errors=panic test
2. mount /dev/sda -o remount,abort test

After commit 014c9ca, remounting a file system using the test
mount option "abort" will no longer trigger a panic.  This commit will
restore the behaviour immediately before commit 014c9ca.
(However, note that the Linux kernel's behavior has not been
consistent; some previous kernel versions, including 5.4 and 4.19
similarly did not panic after using the mount option "abort".)

This also makes a change to long-standing behaviour; namely, the
following series commands will now cause a panic, when previously it
did not:

1. mount /dev/sda -o ro,errors=panic test
2. echo test > /sys/fs/ext4/sda/trigger_fs_error

However, this makes ext4's behaviour much more consistent, so this is
a good thing.

Cc: stable@kernel.org
Fixes: 014c9ca ("ext4: make ext4_abort() use __ext4_error()")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210401081903.3421208-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

The buffer uptodate state has been checked in function set_buffer_uptodate,
there is no need use buffer_uptodate before calling set_buffer_uptodate and
delete it.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/1617260610-29770-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due
to some error happens behind ext4_orphan_cleanup(), it will end up
triggering a after free issue of super_block. The problem is that
ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is
enabled, after we cleanup the truncated inodes, the last iput() will put
them into the lru list, and these inodes' pages may probably dirty and
will be write back by the writeback thread, so it could be raced by
freeing super_block in the error path of mount_bdev().

After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it
was used to ensure updating the quota file properly, but evict inode and
trash data immediately in the last iput does not affect the quotafile,
so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by
just remove the SB_ACTIVE setting.

[1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Block bitmap prefetching is needed for these allocator optimization
data structures to get populated and provide better group scanning
order. So, turn it on bu default. prefetch_block_bitmaps mount option
is now marked as removed and a new option no_prefetch_block_bitmaps is
added to disable block bitmap prefetching.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

This patch adds a new file "mb_structs_summary" which allows us to see
the summary of the new allocator structures added in this
series. Here's the sample output of file:

optimize_scan: 1
max_free_order_lists:
        list_order_0_groups: 0
        list_order_1_groups: 0
        list_order_2_groups: 0
        list_order_3_groups: 0
        list_order_4_groups: 0
        list_order_5_groups: 0
        list_order_6_groups: 0
        list_order_7_groups: 0
        list_order_8_groups: 0
        list_order_9_groups: 0
        list_order_10_groups: 0
        list_order_11_groups: 0
        list_order_12_groups: 0
        list_order_13_groups: 40
fragment_size_tree:
        tree_min: 16384
        tree_max: 32768
        tree_nodes: 40

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.

At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).

For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.

There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.

All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".

With this patchset, following experiment was performed:

Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:

time dd if=/dev/urandom of=file bs=2M count=10

Here are the results with and without cr 0/1 optimizations introduced
in this patch:

|---------+------------------------------+---------------------------|
|         | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s                     | 2m47.642s                 |
| 2nd run | 2m28.390s                    | 0m0.611s                  |
| 3rd run | 2m26.530s                    | 0m1.255s                  |
|---------+------------------------------+---------------------------|

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

A few arrays in mballoc.c use the total number of valid orders as
their size. Currently, this value is set as "sb->s_blocksize_bits +
2". This makes code harder to read. So, instead add a new macro
MB_NUM_ORDERS(sb) to make the code more readable.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Add new stats for measuring the performance of mballoc. This patch is
forked from Artem Blagodarenko's work that can be found here:

https://github.com/lustre/lustre-release/blob/master/ldiskfs/kernel_patches/patches/rhel8/ext4-simple-blockalloc.patch

This patch reorganizes the stats by cr level. This is how the output
looks like:

mballoc:
	reqs: 0
	success: 0
	groups_scanned: 0
	cr0_stats:
		hits: 0
		groups_considered: 0
		useless_loops: 0
		bad_suggestions: 0
	cr1_stats:
		hits: 0
		groups_considered: 0
		useless_loops: 0
		bad_suggestions: 0
	cr2_stats:
		hits: 0
		groups_considered: 0
		useless_loops: 0
	cr3_stats:
		hits: 0
		groups_considered: 0
		useless_loops: 0
	extents_scanned: 0
		goal_hits: 0
		2^n_hits: 0
		breaks: 0
		lost: 0
	buddies_generated: 0/40
	buddies_time_used: 0
	preallocated: 0
	discarded: 0

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Before this patch, the function parse_options() was returning
journal_devnum and journal_ioprio variables to the caller. This patch
generalizes that interface to allow parse_options to return any parsed
options to return back to the caller. In this patch series, it gets
used to capture the value of "mb_optimize_scan=%u" mount option.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

s_mb_buddies_generated gets used later in this patch series to
determine if the cr 0 and cr 1 optimziations should be performed or
not. Currently, s_mb_buddies_generated is protected under a
spin_lock. In the allocation path, it is better if we don't depend on
the lock and instead read the value atomically. In order to do that,
we drop s_bal_lock altogether and we convert the only two protected
fields by it s_mb_buddies_generated and s_mb_generation_time to atomic
type.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

…odes

Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.

  mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda

So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.

Cc: stable@kernel.org
Fixes: 5012284 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Building with 'make W=1' shows a harmless -Wempty-body warning:

fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:267:75: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  267 |                 jbd_debug(3, "Fast commit replay failed, err = %d\n", err);
      |                                                                           ^

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210322102152.95684-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Matching names with casefolded encrypting directories requires
decrypting entries to confirm case since we are case preserving. We can
avoid needing to decrypt if our hash values don't match.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210319073414.1381041-3-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

This adds support for encryption with casefolding.

Since the name on disk is case preserving, and also encrypted, we can no
longer just recompute the hash on the fly. Additionally, to avoid
leaking extra information from the hash of the unencrypted name, we use
siphash via an fscrypt v2 policy.

The hash is stored at the end of the directory entry for all entries
inside of an encrypted and casefolded directory apart from those that
deal with '.' and '..'. This way, the change is backwards compatible
with existing ext4 filesystems.

[ Changed to advertise this feature via the file:
  /sys/fs/ext4/features/encrypted_casefold -- TYT ]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210319073414.1381041-2-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Removes braces to follow the coding style.

Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Link: https://lore.kernel.org/r/20210316052953.67616-1-mdjurovic@zohomail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

A number of tracepoint instances have been removed from ext4 by past
patches but the definitions of those tracepoints have not.

All instances of ext4_ext_in_cache and ext4_ext_put_in_cache were
removed by commit 69eb33d ("ext4: remove single extent cache").
ext4_get_reserved_cluster_alloc was removed by commit b6bf917
("ext4: reduce reserved cluster count by number of allocated
clusters").  ext4_find_delalloc_range was removed by commit
7d1b1fb ("ext4: reimplement ext4_find_delay_alloc_range on extent
status tree").

All instances of ext4_direct_IO_enter and ext4_direct_IO_exit were
removed by commit 378f32b ("ext4: introduce direct I/O write
using iomap infrastructure").

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210216191634.20957-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Some members of transaction_t are allowed to be read without any lock
being held if accessed from the correct context.  We used LockDoc's
findings to determine those members.  Each member of them is marked
with a short comment: "no lock needed for jbd2 thread".

Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210211171410.17984-1-alexander.lochmann@tu-dortmund.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Some members of transaction_t are allowed to be read without any lock
being held if consistency doesn't matter.  Based on LockDoc's
findings, we extended the locking documentation of those members.
Each one of them is marked with a short comment: "no lock for quick
racy checks".

Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ad82c7a9-a624-4ed5-5ada-a6410c44c0b3@tu-dortmund.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210207190425.38107-7-chaitanya.kulkarni@wdc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210207190425.38107-6-chaitanya.kulkarni@wdc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

…ux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for v5.12"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: initialize ret to suppress smatch warning
  ext4: stop inode update before return
  ext4: fix rename whiteout with fast commit
  ext4: fix timer use-after-free on failed mount
  ext4: fix potential error in ext4_do_update_inode
  ext4: do not try to set xattr into ea_inode if value is empty
  ext4: do not iput inode under running transaction in ext4_rename()
  ext4: find old entry again if failed to rename whiteout
  ext4: fix error handling in ext4_end_enable_verity()
  ext4: fix bh ref count on error paths
  fs/ext4: fix integer overflow in s_log_groups_per_flex
  ext4: add reclaim checks to xattr code
  ext4: shrink race window in ext4_should_retry_alloc()

Pull io_uring followup fixes from Jens Axboe:

 - The SIGSTOP change from Eric, so we properly ignore that for
   PF_IO_WORKER threads.

 - Disallow sending signals to PF_IO_WORKER threads in general, we're
   not interested in having them funnel back to the io_uring owning
   task.

 - Stable fix from Stefan, ensuring we properly break links for short
   send/sendmsg recv/recvmsg if MSG_WAITALL is set.

 - Catch and loop when needing to run task_work before a PF_IO_WORKER
   threads goes to sleep.

* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
  io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
  io-wq: ensure task is running before processing task_work
  signal: don't allow STOP on PF_IO_WORKER threads
  signal: don't allow sending any signals to PF_IO_WORKER threads

…rnel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Some small staging and IIO driver fixes:

   - MAINTAINERS changes for the move of the staging mailing list

   - comedi driver fixes to get request_irq() to work correctly

   - counter driver fixes for reported issues with iio devices

   - tiny iio driver fixes for reported issues.

  All of these have been in linux-next with no reported problems"

* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt665x: fix alignment constraints
  staging: comedi: cb_pcidas64: fix request_irq() warn
  staging: comedi: cb_pcidas: fix request_irq() warn
  MAINTAINERS: move the staging subsystem to lists.linux.dev
  MAINTAINERS: move some real subsystems off of the staging mailing list
  iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  iio: hid-sensor-temperature: Fix issues of timestamp channel
  iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  counter: stm32-timer-cnt: fix ceiling write max value
  counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  iio: adc: ab8500-gpadc: Fix off by 10 to 3
  iio:adc:stm32-adc: Add HAS_IOMEM dependency
  iio: adis16400: Fix an error code in adis16400_initial_setup()
  iio: adc: adi-axi-adc: add proper Kconfig dependencies
  iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
  iio: hid-sensor-prox: Fix scale not correct issue
  iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel