This Broadcom STB PCIe RC driver has one port and connects directly to one
device, be it a switch or an endpoint.  We want to be able to leverage
the recently added mechansim that allocates and turns on/off subdevice
regulators.

All that needs to be done is to put the regulator DT nodes in the bridge
below host and to set the pci_ops methods add_bus and remove_bus.

Note that the pci_subdev_regulators_add_bus() method is wrapped for two
reasons:

   1. To acheive linkup after the voltage regulators are turned on.

   2. If, in the case of an unsuccessful linkup, to redirect
      any PCIe accesses to subdevices, e.g. the scan for
      DEV/ID.  This redirection is needed because the Broadcom
      PCIe HW wil issue a CPU abort if such an access is made when
      there is no linkup.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

We need to take some code in brcm_pcie_setup() and put it in a new function
brcm_pcie_linkup().  In future commits the brcm_pcie_linkup() function will
be called indirectly by pci_host_probe() as opposed to the host driver
invoking it directly.

Some code that was executed after the PCIe linkup is now placed so that it
executes prior to linkup, since this code has to run prior to the
invocation of pci_host_probe().

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

If any downstream device may wake up during S2/S3 suspend, we do not want
to turn off its power when suspending.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

Adds a mechanism inside the root port device to identify standard PCIe
regulators in the DT, allocate them, and turn them on before the rest of
the bus is scanned during pci_host_probe().  A root complex driver can
leverage this mechanism by setting the pci_ops methods add_bus and
remove_bus to pci_subdev_regulators_{add,remove}_bus.

The allocated structure that contains the regulators is stored in
dev.driver_data.

The unabridged reason for doing this is as follows.  We would like the
Broadcom STB PCIe root complex driver (and others) to be able to turn
off/on regulators[1] that provide power to endpoint[2] devices.  Typically,
the drivers of these endpoint devices are stock Linux drivers that are not
aware that these regulator(s) exist and must be turned on for the driver to
be probed.  The simple solution of course is to turn these regulators on at
boot and keep them on.  However, this solution does not satisfy at least
three of our usage modes:

1. For example, one customer uses multiple PCIe controllers, but wants the
ability to, by script invoking and unbind, turn any or all of them by and
their subdevices off to save power, e.g. when in battery mode.

2. Another example is when a watchdog script discovers that an endpoint
device is in an unresponsive state and would like to unbind, power toggle,
and re-bind just the PCIe endpoint and controller.

3. Of course we also want power turned off during suspend mode.  However,
some endpoint devices may be able to "wake" during suspend and we need to
recognise this case and veto the nominal act of turning off its regulator.
Such is the case with Wake-on-LAN and Wake-on-WLAN support where PCIe
end-point device needs to be kept powered on in order to receive network
packets and wake-up the system.

In all of these cases it is advantageous for the PCIe controller to govern
the turning off/on the regulators needed by the endpoint device.  The first
two cases can be done by simply unbinding and binding the PCIe controller,
if the controller has control of these regulators.

[1] These regulators typically govern the actual power supply to the
    endpoint chip.  Sometimes they may be a the official PCIe socket
    power -- such as 3.3v or aux-3.3v.  Sometimes they are truly
    the regulator(s) that supply power to the EP chip.

[2] The 99% configuration of our boards is a single endpoint device
    attached to the PCIe controller.  I use the term endpoint but it could
    possible mean a switch as well.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

The function will be needed elsewhere in a few commits.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
allows optional regulators to be attached and controlled by the PCIe RC
driver.  That being said, this driver searches in the DT subnode (the EP
node, eg pci-ep@0,0) for the regulator property.

The use of a regulator property in the pcie EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at

devicetree-org/dt-schema#63

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

The "pcie" and "msi" interrupts were given the same interrupt when they are
actually different.  Interrupt-map only had the INTA entry; the INTB, INTC,
and INTD entries are added.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

We do not use the result of this function so make it void.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>

…el/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Again it became bigger than wished, unfortunately, as this contains
  quite a few ASoC fixes that came up a bit late. It also includes yet
  more HD- and USB-audio quirks: I decided to merge them now, as those
  are for stable, and we'll need them sooner or later.

  Although the volumes are a bit high, all changes are device-specific
  (and reasonably small) fixes, so it should be safe for the late rc"

* tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix microphone sound on Jieli webcam.
  ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers
  ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
  ALSA: hda/realtek: Add quirk for Clevo PC50HS
  ALSA: usb-audio: add Schiit Hel device to quirk table
  ASoC: wm8960: Fix clock configuration on slave mode
  ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets
  ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked()
  ASoC: codec: wcd938x: Add irq config support
  ASoC: DAPM: Fix missing kctl change notifications
  ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation
  ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()
  ASoC: Intel: bytcht_es8316: Use temporary variable for struct device
  ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()
  ASoC: wcd938x: Fix jack detection issue
  ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working
  ASoC: cs4341: Add SPI device ID table
  ASoC: pcm179x: Add missing entries SPI to device ID table
  ASoC: fsl_xcvr: Fix channel swap issue with ARC
  ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers

…ernel/git/pcmoore/audit

Pull audit fix from Paul Moore:
 "One small audit patch to add a pointer NULL check"

* tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: fix possible null-pointer dereference in audit_filter_rules

…nel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Recursion fix for tracing.

  While cleaning up some of the tracing recursion protection logic, I
  discovered a scenario that the current design would miss, and would
  allow an infinite recursion. Removing an optimization trick that
  opened the hole fixes the issue and cleans up the code as well"

* tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have all levels of checks prevent recursion

…cm/linux/kernel/git/dinguyen/linux

Pull nios2 fix from Dinh Nguyen:

 - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning

* tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  NIOS2: irqflags: rename a redefined register name

Pull kvm fixes from Paolo Bonzini:
 "Tools:
   - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic

  x86:
   - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps
   - two fixes for SEV-ES (one more coming as soon as I get reviews)
   - fix for static_key underflow

  ARM:
   - Properly refcount pages used as a concatenated stage-2 PGD
   - Fix missing unlock when detecting the use of MTE+VM_SHARED"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SEV-ES: reduce ghcb_sa_len to 32 bits
  KVM: VMX: Remove redundant handling of bus lock vmexit
  KVM: kvm_stat: do not show halt_wait_ns
  KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload
  Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET"
  KVM: SEV-ES: Set guest_state_protected after VMSA update
  KVM: X86: fix lazy allocation of rmaps
  KVM: SEV-ES: fix length of string I/O
  KVM: arm64: Release mmap_lock when using VM_SHARED with MTE
  KVM: arm64: Report corrupted refcount at EL2
  KVM: arm64: Fix host stage-2 PGD refcount
  KVM: s390: Function documentation fixes

Merge misc fixes from Andrew Morton:
 "19 patches.

  Subsystems affected by this patch series: mm (userfaultfd, migration,
  memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs,
  and misc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mailmap: add Andrej Shadura
  mm/thp: decrease nr_thps in file's mapping on THP split
  mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem()
  vfs: check fd has read access in kernel_read_file_from_fd()
  elfcore: correct reference to CONFIG_UML
  mm, slub: fix incorrect memcg slab count for bulk free
  mm, slub: fix potential use-after-free in slab_debugfs_fops
  mm, slub: fix potential memoryleak in kmem_cache_open()
  mm, slub: fix mismatch between reconstructed freelist depth and cnt
  mm, slub: fix two bugs in slab_debug_trace_open()
  mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
  memblock: check memory total_size
  ocfs2: mount fails with buffer overflow in strlen
  ocfs2: fix data corruption after conversion from inline format
  mm/migrate: fix CPUHP state to update node demotion order
  mm/migrate: add CPU hotplug to demotion #ifdef
  mm/migrate: optimize hotplug-time demotion order updates
  userfaultfd: fix a race between writeprotect and exit_mmap()
  mm/userfaultfd: selftests: fix memory corruption with thp enabled

Add a mapping for my old work email for BelDisplayTech to the personal
email, and make sure the Collabora email has the correct spelling of the
first name.

Link: https://lkml.kernel.org/r/20210917091016.30232-1-andrew.shadura@collabora.co.uk
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Decrease nr_thps counter in file's mapping to ensure that the page cache
won't be dropped excessively on file write access if page has been
already split.

I've tried a test scenario running a big binary, kernel remaps it with
THPs, then force a THP split with /sys/kernel/debug/split_huge_pages.
During any further open of that binary with O_RDWR or O_WRITEONLY kernel
drops page cache for it, because of non-zero thps counter.

Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 09d91cd ("mm,thp: avoid writes to file with THP in pagecache")
Fixes: 06d3eff ("mm/thp: fix node page state in split_huge_page_to_list()")
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <sfoon.kim@samsung.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Check for a NULL page->mapping before dereferencing the mapping in
page_is_secretmem(), as the page's mapping can be nullified while gup()
is running, e.g.  by reclaim or truncation.

  BUG: kernel NULL pointer dereference, address: 0000000000000068
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G        W
  RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0
  Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be
  RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046
  RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900
  ...
  CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0
  Call Trace:
   get_user_pages_fast_only+0x13/0x20
   hva_to_pfn+0xa9/0x3e0
   try_async_pf+0xa1/0x270
   direct_page_fault+0x113/0xad0
   kvm_mmu_page_fault+0x69/0x680
   vmx_handle_exit+0xe1/0x5d0
   kvm_arch_vcpu_ioctl_run+0xd81/0x1c70
   kvm_vcpu_ioctl+0x267/0x670
   __x64_sys_ioctl+0x83/0xa0
   do_syscall_64+0x56/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com
Fixes: 1507f51 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Stephen <stephenackerman16@gmail.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we open a file without read access and then pass the fd to a syscall
whose implementation calls kernel_read_file_from_fd(), we get a warning
from __kernel_read():

        if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ)))

This currently affects both finit_module() and kexec_file_load(), but it
could affect other syscalls in the future.

Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org
Fixes: b844f0e ("vfs: define kernel_copy_file_from_fd()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6e7b64b ("elfcore: fix building with clang") introduces
special handling for two architectures, ia64 and User Mode Linux.
However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig
symbol for User-Mode Linux was used.

Although the directory for User Mode Linux is ./arch/um; the Kconfig
symbol for this architecture is called CONFIG_UML.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

  UM
  Referencing files: include/linux/elfcore.h
  Similar symbols: UML, NUMA

Correct the name of the config to the intended one.

[akpm@linux-foundation.org: fix um/x86_64, per Catalin]
  Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com
  Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com

Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com
Fixes: 6e7b64b ("elfcore: fix building with clang")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Barret Rhoden <brho@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects
when doing bulk free.  So we shouldn't call memcg_slab_free_hook() again
for bulk free to avoid incorrect memcg slab count.

Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com
Fixes: d1b2cf6 ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s
because s will be freed soon.  And slab_debugfs_fops will use s later
leading to a use-after-free.

Link: https://lkml.kernel.org/r/20210916123920.48704-5-linmiaohe@huawei.com
Fixes: 64dd684 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In error path, the random_seq of slub cache might be leaked.  Fix this
by using __kmem_cache_release() to release all the relevant resources.

Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com
Fixes: 210e7a4 ("mm: SLUB freelist randomization")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If object's reuse is delayed, it will be excluded from the reconstructed
freelist.  But we forgot to adjust the cnt accordingly.  So there will
be a mismatch between reconstructed freelist depth and cnt.  This will
lead to free_debug_processing() complaining about freelist count or a
incorrect slub inuse count.

Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com
Fixes: c389539 ("kasan, slub: fix handling of kasan_slab_free hook")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Fixups for slub".

This series contains various bug fixes for slub.  We fix memoryleak,
use-afer-free, NULL pointer dereferencing and so on in slub.  More
details can be found in the respective changelogs.

This patch (of 5):

It's possible that __seq_open_private() will return NULL.  So we should
check it before using lest dereferencing NULL pointer.  And in error
paths, we forgot to release private buffer via seq_release_private().
Memory will leak in these paths.

Link: https://lkml.kernel.org/r/20210916123920.48704-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210916123920.48704-2-linmiaohe@huawei.com
Fixes: 64dd684 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

… in mbind()

syzbot reported access to unitialized memory in mbind() [1]

Issue came with commit bda420b ("numa balancing: migrate on fault
among multiple bound nodes")

This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid
combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in
do_set_mempolicy()

This patch moves the check in sanitize_mpol_flags() so that it is also
used by mbind()

  [1]
  BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
   __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
   mpol_equal include/linux/mempolicy.h:105 [inline]
   vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
   mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
   do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
   kernel_mbind mm/mempolicy.c:1483 [inline]
   __do_sys_mbind mm/mempolicy.c:1490 [inline]
   __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
   __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
   do_syscall_x64 arch/x86/entry/common.c:51 [inline]
   do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
   entry_SYSCALL_64_after_hwframe+0x44/0xae

  Uninit was created at:
   slab_alloc_node mm/slub.c:3221 [inline]
   slab_alloc mm/slub.c:3230 [inline]
   kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235
   mpol_new mm/mempolicy.c:293 [inline]
   do_mbind+0x912/0x15f0 mm/mempolicy.c:1289
   kernel_mbind mm/mempolicy.c:1483 [inline]
   __do_sys_mbind mm/mempolicy.c:1490 [inline]
   __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
   __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
   do_syscall_x64 arch/x86/entry/common.c:51 [inline]
   do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  =====================================================
  Kernel panic - not syncing: panic_on_kmsan set ...
  CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G    B             5.15.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106
   dump_stack+0x25/0x28 lib/dump_stack.c:113
   panic+0x44f/0xdeb kernel/panic.c:232
   kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186
   __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208
   __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
   mpol_equal include/linux/mempolicy.h:105 [inline]
   vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
   mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
   do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
   kernel_mbind mm/mempolicy.c:1483 [inline]
   __do_sys_mbind mm/mempolicy.c:1490 [inline]
   __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
   __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
   do_syscall_x64 arch/x86/entry/common.c:51 [inline]
   do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20211001215630.810592-1-eric.dumazet@gmail.com
Fixes: bda420b ("numa balancing: migrate on fault among multiple bound nodes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem=[X][G|M] is broken on ARM64 platform, there are cases that even
type.cnt is 1, but total_size is not 0 because regions are merged into
1.  So only check 'cnt' is not enough, total_size should be used,
othersize bootargs 'mem=[X][G|B]' not work anymore.

Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com
Fixes: e888fa7 ("memblock: Check memory add/cap ordering")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an
ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the
trace below.  Problem seems to be that strings for cluster stack and
cluster name are not guaranteed to be null terminated in the disk
representation, while strlcpy assumes that the source string is always
null terminated.  This causes a read outside of the source string
triggering the buffer overflow detection.

  detected buffer overflow in strlen
  ------------[ cut here ]------------
  kernel BUG at lib/string.c:1149!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1
    Debian 5.14.6-2
  RIP: 0010:fortify_panic+0xf/0x11
  ...
  Call Trace:
   ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2]
   ocfs2_fill_super+0x359/0x19b0 [ocfs2]
   mount_bdev+0x185/0x1b0
   legacy_get_tree+0x27/0x40
   vfs_get_tree+0x25/0xb0
   path_mount+0x454/0xa20
   __x64_sys_mount+0x103/0x140
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6dbf7bb ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.

The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster.  However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.

This oversight was fixed by commit 693c241 ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.

After commit 6dbf7bb, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty.  So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean.  So data
written to these pages is lost once pages are reclaimed.

Simple reproducer for the problem is:

  xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
    -c "pwrite 4000 2000" ocfs2_file

After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.

Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.

[akpm@linux-foundation.org: fix whitespace, per Joseph]

Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz
Fixes: 6dbf7bb ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: "Markov, Andrey" <Markov.Andrey@Dell.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The node demotion order needs to be updated during CPU hotplug.  Because
whether a NUMA node has CPU may influence the demotion order.  The
update function should be called during CPU online/offline after the
node_states[N_CPU] has been updated.  That is done in
CPUHP_AP_ONLINE_DYN during CPU online and in CPUHP_MM_VMSTAT_DEAD during
CPU offline.  But in commit 884a6e5 ("mm/migrate: update node
demotion order on hotplug events"), the function to update node demotion
order is called in CPUHP_AP_ONLINE_DYN during CPU online/offline.  This
doesn't satisfy the order requirement.

For example, there are 4 CPUs (P0, P1, P2, P3) in 2 sockets (P0, P1 in S0
and P2, P3 in S1), the demotion order is

 - S0 -> NUMA_NO_NODE
 - S1 -> NUMA_NO_NODE

After P2 and P3 is offlined, because S1 has no CPU now, the demotion
order should have been changed to

 - S0 -> S1
 - S1 -> NO_NODE

but it isn't changed, because the order updating callback for CPU
hotplug doesn't see the new nodemask.  After that, if P1 is offlined,
the demotion order is changed to the expected order as above.

So in this patch, we added CPUHP_AP_MM_DEMOTION_ONLINE and
CPUHP_MM_DEMOTION_DEAD to be called after CPUHP_AP_ONLINE_DYN and
CPUHP_MM_VMSTAT_DEAD during CPU online and offline, and register the
update function on them.

Link: https://lkml.kernel.org/r/20210929060351.7293-1-ying.huang@intel.com
Fixes: 884a6e5 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Once upon a time, the node demotion updates were driven solely by memory
hotplug events.  But now, there are handlers for both CPU and memory
hotplug.

However, the #ifdef around the code checks only memory hotplug.  A
system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU
hotplug events.

Update the #ifdef around the common code.  Add memory and CPU-specific
#ifdefs for their handlers.  These memory/CPU #ifdefs avoid unused
function warnings when their Kconfig option is off.

[arnd@arndb.de: rework hotplug_memory_notifier() stub]
  Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org

Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com
Fixes: 884a6e5 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/migrate: 5.15 fixes for automatic demotion", v2.

This contains two fixes for the "automatic demotion" code which was
merged into 5.15:

 * Fix memory hotplug performance regression by watching
   suppressing any real action on irrelevant hotplug events.

 * Ensure CPU hotplug handler is registered when memory hotplug
   is disabled.

This patch (of 2):

== tl;dr ==

Automatic demotion opted for a simple, lazy approach to handling hotplug
events.  This noticeably slows down memory hotplug[1].  Optimize away
updates to the demotion order when memory hotplug events should have no
effect.

This has no effect on CPU hotplug.  There is no known problem on the CPU
side and any work there will be in a separate series.

== Background ==

Automatic demotion is a memory migration strategy to ensure that new
allocations have room in faster memory tiers on tiered memory systems.
The kernel maintains an array (node_demotion[]) to drive these
migrations.

The node_demotion[] path is calculated by starting at nodes with CPUs
and then "walking" to nodes with memory.  Only hotplug events which
online or offline a node with memory (N_ONLINE) or CPUs (N_CPU) will
actually affect the migration order.

== Problem ==

However, the current code is lazy.  It completely regenerates the
migration order on *any* CPU or memory hotplug event.  The logic was
that these events are extremely rare and that the overhead from
indiscriminate order regeneration is minimal.

Part of the update logic involves a synchronize_rcu(), which is a pretty
big hammer.  Its overhead was large enough to be detected by some 0day
tests that watch memory hotplug performance[1].

== Solution ==

Add a new helper (node_demotion_topo_changed()) which can differentiate
between superfluous and impactful hotplug events.  Skip the expensive
update operation for superfluous events.

== Aside: Locking ==

It took me a few moments to declare the locking to be safe enough for
node_demotion_topo_changed() to work.  It all hinges on the memory
hotplug lock:

During memory hotplug events, 'mem_hotplug_lock' is held for write.
This ensures that two memory hotplug events can not be called
simultaneously.

CPU hotplug has a similar lock (cpuhp_state_mutex) which also provides
mutual exclusion between CPU hotplug events.  In addition, the demotion
code acquire and hold the mem_hotplug_lock for read during its CPU
hotplug handlers.  This provides mutual exclusion between the demotion
memory hotplug callbacks and the CPU hotplug callbacks.

This effectively allows treating the migration target generation code to
act as if it is single-threaded.

1. https://lore.kernel.org/all/20210905135932.GE15026@xsang-OptiPlex-9020/

Link: https://lkml.kernel.org/r/20210924161251.093CCD06@davehans-spike.ostc.intel.com
Link: https://lkml.kernel.org/r/20210924161253.D7673E31@davehans-spike.ostc.intel.com
Fixes: 884a6e5 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A race is possible when a process exits, its VMAs are removed by
exit_mmap() and at the same time userfaultfd_writeprotect() is called.

The race was detected by KASAN on a development kernel, but it appears
to be possible on vanilla kernels as well.

Use mmget_not_zero() to prevent the race as done in other userfaultfd
operations.

Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com
Fixes: 63b2d41 ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Signed-off-by: Nadav Amit <namit@vmware.com>
Tested-by: Li  Wang <liwang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In RHEL's gating selftests we've encountered memory corruption in the
uffd event test even with upstream kernel:

        # ./userfaultfd anon 128 4
        nr_pages: 32768, nr_pages_per_cpu: 32768
        bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729)
        bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877)
        bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699)
        bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196)
        testing uffd-wp with pagemap (pgsize=4096): done
        testing uffd-wp with pagemap (pgsize=2097152): done
        testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963)
        ERROR: faulting process failed (errno=0, line=1117)

It can be easily reproduced when global thp enabled, which is the
default for RHEL.

It's also known as a side effect of commit 0db282b ("selftest: use
mmap instead of posix_memalign to allocate memory", 2021-07-23), which
is imho right itself on using mmap() to make sure the addresses will be
untagged even on arm.

The problem is, for each test we allocate buffers using two
allocate_area() calls.  We assumed these two buffers won't affect each
other, however they could, because mmap() could have found that the two
buffers are near each other and having the same VMA flags, so they got
merged into one VMA.

It won't be a big problem if thp is not enabled, but when thp is
agressively enabled it means when initializing the src buffer it could
accidentally setup part of the dest buffer too when there's a shared THP
that overlaps the two regions.  Then some of the dest buffer won't be
able to be trapped by userfaultfd missing mode, then it'll cause memory
corruption as described.

To fix it, do release_pages() after initializing the src buffer.

Since the previous two release_pages() calls are after
uffd_test_ctx_clear() which will unmap all the buffers anyway (which is
stronger than release pages; as unmap() also tear town pgtables), drop
them as they shouldn't really be anything useful.

We can mark the Fixes tag upon 0db282b as it's reported to only
happen there, however the real "Fixes" IMHO should be 8ba6e86, as
before that commit we'll always do explicit release_pages() before
registration of uffd, and 8ba6e86 changed that logic by adding
extra unmap/map and we didn't release the pages at the right place.
Meanwhile I don't have a solid glue anyway on whether posix_memalign()
could always avoid triggering this bug, hence it's safer to attach this
fix to commit 8ba6e86.

Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com
Fixes: 8ba6e86 ("userfaultfd/selftests: reinitialize test context in each test")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Li Wang <liwan@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a Jieli Technology USB Webcam is connected, the video part works
well, but the mic sound is speeded up. On dmesg there are messages
about different rates from the runtime rates, warnings about volume
resolution and lastly, the log is filled, every 5 seconds, with
retire_capture_urb error messages.

The mic works only when ep packet size is set to wMaxPacketSize (normal
sound and no more retire_capture_urb error messages). Skipping reading
sample rate, fixes the messages about different rates and forcing a volume
resolution, fixes warnings about volume range. I have arbitrarily choosed
the value (16): I read in a comment that there should be no more than 255
levels, so 4096 (max volume) / 16 = 0-255.

Signed-off-by: Marco Giunta <giun7a@gmail.com>
Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix  possible null-pointer dereference in audit_filter_rules.

audit_filter_rules() error: we previously assumed 'ctx' could be null

Cc: stable@vger.kernel.org
Fixes: bf36123 ("audit: add saddr_fam filter field")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>