Each DP link training contains link training 1 followed by link
training 2.  There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test  case 4.3.1.13 (Source Device Link Training EQ Fallback Test).

Changes in v10:
--  group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Fixes: 2e0adc7 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Some DP sinkers prefer to use tps4 instead of tps3 during training #2.
This patch will use tps4 to perform link training #2 if sinker's DPCD
supports it.

Changes in V2:
-- replace  dp_catalog_ctrl_set_pattern() with  dp_catalog_ctrl_set_pattern_state_bit()

Changes in V3:
-- change state_ctrl_bits type to u32 and pattern type to u8

Changes in V4:
-- align } else if { and } else {

Changes in v10:
--  group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.

The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.

Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()

Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp

Changes in V4:
-- add more details to commit text

Changes in v10:
--  group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Fixes: 7948fe1 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Current DP drivers have regulators, clocks, irq and phy are grouped
together within a function and executed not in a symmetric manner.
This increase difficulty of code maintenance and limited code scalability.
This patch divides the driver life cycle of operation into four states,
resume (including booting up), dongle plugin, dongle unplugged and suspend.
Regulators, core clocks and irq are grouped together and enabled at resume
(or booting up) so that the DP controller is armed and ready to receive HPD
plugin interrupts. HPD plugin interrupt is generated when a dongle plugs
into DUT (device under test). Once HPD plugin interrupt is received, DP
controller will initialize phy so that dpcd read/write will function and
following link training can be proceeded successfully. DP phy will be
disabled after main link is teared down at end of unplugged HPD interrupt
handle triggered by dongle unplugged out of DUT. Finally regulators, code
clocks and irq are disabled at corresponding suspension.

Changes in V2:
-- removed unnecessary dp_ctrl NULL check
-- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs
-- remove flip parameter out of dp_ctrl_irq_enable()
-- add fixes tag

Changes in V3:
-- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at
        dp_display_host_init() for eDP

Changes in V4:
-- rewording commit text to match this commit changes

Changes in V5:
-- rebase on top of msm-next branch

Changes in V6:
-- delete flip variable

Changes in V7:
-- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl()

Changes in V8:
-- add more detail comment regrading dp phy at dp_display_host_init()

Changes in V9:
-- remove set phy_initialized to false when -ECONNRESET detected

Changes in v10:
--  group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Changes in v12:
-- move dp_display_host_phy_exit() after dp_display_host_deinit()

Changes in v13:
-- do not execute phy_init until plugged_in interrupt for edp, same as DP.

Fixes: 8ede2ec ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

…org/agd5f/linux into drm-next

amd-drm-next-5.17-2021-12-30:

amdgpu:
- Suspend/resume fixes
- Fence fix
- Misc code cleanups
- IP discovery fixes
- SRIOV fixes
- RAS fixes
- GMC 8 VRAM detection fix
- FRU fixes for Aldebaran
- Display fixes

amdkfd:
- SVM fixes
- IP discovery fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230141032.613596-1-alexander.deucher@amd.com

Chips with no display hardware should return false for
DC support.

v2: drop Arcturus and Aldebaran

Fixes: f7f12b2 ("drm/amdgpu: default to true in amdgpu_device_asic_has_dc_support")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reported-by: Tareque Md.Hanif <tarequemd.hanif@yahoo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The "plane_state" pointer was access before checking if it was NULL.

Avoid a possible NULL pointer dereference by accessing the plane
address after the check.

Addresses-Coverity-ID: 1493892 ("Dereference before null check")
Fixes: 3f68c01 ("drm/amd/display: add cyan_skillfish display support")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If the platform suspend happens to fail and the power rail
is not turned off, the GPU will be in an unknown state on
resume, so reset the asic so that it will be in a known
good state on resume even if the platform suspend failed.

v2: handle s0ix

Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

…pable platform

By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and
put itself into a state ready for PNP. That can workaround some random resuming
failure observed on BOCO capable platforms.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

…ures()

In function enable_stream_features(), the variable "old_downspread.raw"
could be uninitialized if core_link_read_dpcd() fails, however, it is
used in the later if statement, and further, core_link_write_dpcd()
may write random value, which is potentially unsafe.

Fixes: 6016cd9 ("drm/amd/display: add helper for enabling mst stream features")
Cc: stable@vger.kernel.org
Signed-off-by: Yizhuo Zhai <yzhai003@ucr.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's not only supported by HG/PX laptops.  It's supported
by all dGPUs which supports BOCO/BACO functionality (runtime
D3).

BOCO - Bus Off, Chip Off.  The entire chip is powered off.
       This is controlled by ACPI.
BACO - Bus Active, Chip Off.  The chip still shows up
       on the PCI bus, but the device itself is powered
       down.

v2: fix missed HG/PX reference

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

== Description ==
Setting values of pm attributes through sysfs
should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway,
but error handling on sysfs level should be improved.

== Changes ==
This patch prohibits performing of all set commands
in SRIOV mode on sysfs level.
It offers better error handling as calls that are
not allowed will not be propagated further.

== Test ==
Writing to any sysfs file in passthrough mode will succeed.
Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".

Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise the RAS error count couldn't be queried from sysfs.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A minor typo.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
When reboot the link res map should be persisted.  So during boot up,
driver will look at the map to determine which link should take priority
to use certain link res.  This is to ensure that link res remains
unshuffled after a reboot.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
When there are more DP2.0 RXs connected than the number HPO DP link
encoders we have, we need to dynamically allocate HPO DP link encoder to
the port that needs it.

[how]
Only allocate HPO DP link encoder when it is needed.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Update all accesses to use hpo dp link encoder through link resource
only.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
This commit is to populate link res in preparation of the next commit.
The next commit will replace all existing code to use link res instead

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

…nterfaces

[why]
There will be a series of re-arch changes in Link Resource Management.
They are more and more muxable link resource objects and the resource is
insufficient for a one to one allocation to all links created.
Therefore a link resource sharing logic is required to determine which
link should use certain link resource.

This commit is the first one in this series that starts by defining a
link resource struct, this struct will be available to all interfaces
that need to perform link programming sequence.

In later commits, we will granduately decouple link resource objects out
of dc link. So instead of access a link resource from dc link. Current
link's resource can be accessible through pipe_ctx->link_res during
commit, or by calling  dc_link_get_cur_link_res function with current
link passed in after commit.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This version brings along the following:

- Fixes and improvements in the LTTPR code
- Improve z-state
- Fix null pointer check
- Improve communication with s0i2
- Update multiple-display split policy
- Add missing registers

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Undo ODM Combine regression causing causing pipe allocation issues.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
These registers are currently missing from the DCN303 header files

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

… pipe split

[WHY]
Current implementation of pipe split policy prevents pipe split with
multiple displays connected, which caused the MCLK speed to be stuck at
max

[HOW]
Changed the pipe split policies so that pipe split is allowed for
multi-display configurations

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.

This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.

[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.

Fixes: 64b1d0e ("drm/amd/display: Add DCN3.1 HWSEQ")

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DP spec specifies that DPRX shall use the read interval in the
TRAINING_AUX_RD_INTERVAL_PHY_REPEATER LTTPR DPCD register. This
register's bit definition is the same as the AUX read interval register
for DPRX.

[How}
Remove logic which forces AUX read interval to 100us for repeaters when
in LTTPR non-transparent mode.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.

[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.

It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.

Fixes: 118a331 ("drm/amd/display: Add DCN3.1 clock manager support")

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Bug fix for null function ptr (should check for NULL instead of not
NULL)

[How]
Fix if condition

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.

[How]
Added power down for DCN10.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Stutter period won't be less than 5000.0, but if PSR is enabled then we
can potentially enter Z9 when MPO is enabled.

SMU will try to enter Z9 too early in these cases (before PSR is
enabled) and we'll see underflow.

[How]
Block z-states (z9, z10) until we can add a new interface to SMU to
signal when we can support z10 but not z9.

We can revert this once the interface change is in.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Current implementation is not scalable and retrofits the existing
standard link training code for purposes outside of its original design.

[How]
Refactor vendor specific link training sequence into its own separate
function to be called instead of the standard link training function.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Max link rate should be limited to the maximum link rate support by any
LTTPR that are connected, including when operating in transparent mode.

[How]
Include transparent mode when factoring in LTTPR max supported link
rate.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.

[how]
use phyical instance when program PHY register.

[note]
could move resync_control programming to dmub next.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

…_mappings.

If the event guard is enabled and VF doesn't receive an ack from PF for full access,
the guest driver load crashes.
This is caused due to the call to ttm_device_clear_dma_mappings with non-initialized
mman during driver tear down.

This patch adds the necessary condition to check if the mman initialization passed or not
and takes the path based on the condition output.

Signed-off-by: Surbhi Kakarya <Surbhi.Kakarya@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch keeps the setting of sdma queue number to the same
after recent KFD code refactor. Additionally, improve code to
use switch case to list IP version to complete kfd device_info
structure filling for IH version assignment. This makes consistency
with the IP parse code in amdgpu_discovery.c.

v2: use dev_warn for the default switch case;
    set default sdma queue per engine(8) and IH handler to v9. (Jonathan)

v3: Fix missed IP version check of Raven.

Fixes: f0dc99a ("drm/amdkfd: add kfd_device_info_init function")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>