…ats framework

The cpufreq_cooling has dedicated APIs for thermal governor called
Intelligent Power Allocation (IPA). IPA needs the CPUs power used by the
devices in the past.  Based on this, IPA tries to estimate the power
budget, allocate new budget and split it across cooling devices for the
next period (keeping the system in the thermal envelope).  When the input
power estimated value has big error, the whole mechanism does not work
properly. The current power estimation assumes constant frequency during
the whole IPA period (e.g. 100ms). This can cause big error in the power
estimation, especially when SchedUtil governor is used and frequency is
often adjusted to the current need. This can be visible in periodic
workloads, when the frequency oscillates between two OPPs and IPA samples
the lower frequency.

This patch introduces a new mechanism which solves this frequency
sampling problem. It uses Active Stats framework to track and account
the CPU power used for a given IPA period.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

The Active Stats framework tracks and accounts the activity of the CPU
for each performance level. It accounts the real residency, when the CPU
was not idle, at a given performance level. This patch adds needed calls
which provide the CPU frequency transition events to the Active Stats
framework.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

The Active Stats framework tracks and accounts the activity of the CPU
for each performance level. It accounts the real residency, when the CPU
was not idle, at a given performance level. This patch adds needed calls
which provide the CPU idle entry/exit events to the Active Stats
framework.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

Introduce a new centralized mechanism for gathering and maintaining CPU
performance statistics - the Active Stats Framework (ASF). It tracks the
CPU activity at all performance levels (frequencies) taking into account
the idle entry/exit. This combined information can be used by other kernel
subsystems, like thermal governor, which tries to estimate the CPU
performance. The information about frequency change comes from CPUFreq
framework, while the idle entry/exit from CPUIdle framework. The ASF is
triggered in both scenarios so it can combine them locally and account in a
proper data structures. ASF is also attached to CPU hotplug, to properly
track it.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

* pm-domains:
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  PM: domains: fix some kernel-doc issues

* pm-cpufreq:
  cpufreq: loongson2: Remove unused linux/sched.h headers
  cpufreq: sh: Remove unused linux/sched.h headers
  cpufreq: stats: Clean up local variable in cpufreq_stats_create_table()
  cpufreq: intel_pstate: hybrid: Fix build with CONFIG_ACPI unset
  cpufreq: sc520_freq: add 'fallthrough' to one case
  cpufreq: intel_pstate: Add Cometlake support in no-HWP mode
  cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
  cpufreq: intel_pstate: hybrid: CPU-specific scaling factor
  cpufreq: intel_pstate: hybrid: Avoid exposing two global attributes

* pm-cpuidle:
  cpuidle: teo: remove unneeded semicolon in teo_select()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  intel_idle: Adjust the SKX C6 parameters if PC6 is disabled

* pm-core:
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: runtime: document common mistake with pm_runtime_get_sync()

* pm-sleep:
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: hibernate: fix spelling mistakes
  PM: wakeirq: Set IRQF_NO_AUTOEN when requesting the IRQ

* pnp:
  PNP: pnpbios: Use list_for_each_entry() instead of list_for_each()
  PNP: use DEVICE_ATTR_RO macro
  PNP: Switch over to dev_dbg()
  PNP: Remove pnp_alloc()
  drivers: pnp: isapnp: proc.c: Remove unnecessary local variables

* acpi-soc:
  ACPI: LPSS: Use kstrtol() instead of simple_strtol()

* acpi-misc:
  ACPI: NVS: fix doc warnings in nvs.c
  ACPI: NUMA: fix typo in a comment
  ACPI: OSL: Use DEFINE_RES_IO_NAMED() to simplify code
  ACPI: bus: Call kobject_put() in acpi_init() error path
  ACPI: bus: Remove unneeded assignment
  ACPI: configfs: Replace ACPI_INFO() with pr_debug()
  ACPI: ipmi: Remove address space handler in error path
  ACPI: event: Remove redundant initialization of local variable
  ACPI: sbshc: Fix fall-through warning for Clang

* acpi-messages:
  ACPI: Remove the macro PREFIX "ACPI: "
  ACPI: sleep: Unify the message printing
  ACPI: sbs: Unify the message printing
  ACPI: scan: Unify the log message printing
  ACPI: sbshc: Unify the message printing
  ACPI: sysfs: Cleanup message printing
  ACPI: reboot: Unify the message printing
  ACPI: processor_throttling: Cleanup the printing messages
  ACPI: processor_perflib: Cleanup print messages
  ACPI: processor_thermal: Remove unused PREFIX for printing
  ACPI: pci_root: Unify the message printing
  ACPI: osl: Remove the duplicated PREFIX for message printing
  ACPI: nvs: Unify the message printing
  ACPI: glue: Clean up the printing messages
  ACPI: event: Use pr_*() macros to replace printk()
  ACPI: bus: Use pr_*() macros to replace printk()
  ACPI: blacklist: Unify the message printing
  ACPI: cmos_rtc: Using pr_fmt() and remove PREFIX

…to linux-next

* acpi-prm:
  ACPI: PRM: make symbol 'prm_module_list' static
  ACPI: Add \_SB._OSC bit for PRM
  ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype

* acpi-dptf:
  ACPI: DPTF: Add battery participant for Intel SoCs

* acpi-apei:
  ACPI: APEI: fix synchronous external aborts in user-mode
  ACPI: APEI: Don't warn if ACPI is disabled

* acpi-x86:
  x86/acpi: Switch to pr_xxx log functions

…' into linux-next

* acpi-tables:
  ACPI: tables: FPDT: Add missing acpi_put_table() in acpi_init_fpdt()
  ACPI: tables: PPTT: Populate cache-id if provided by firmware

* acpi-ec:
  ACPI: EC: Make more Asus laptops use ECDT _GPE

* acpi-sysfs:
  ACPI: sysfs: Remove tailing return statement in void function
  ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
  ACPI: sysfs: Sort headers alphabetically
  ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
  ACPI: sysfs: Unify pattern of memory allocations
  ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
  ACPI: sysfs: Make sparse happy about address space in use
  ACPI: sysfs: fix doc warnings in device_sysfs.c
  ACPI: sysfs: Drop four redundant return statements
  ACPI: sysfs: Fix a buffer overrun problem with description_show()

* acpi-video:
  ACPI: video: Drop three redundant return statements

…linux-next

* acpi-pm:
  ACPI: PM: Adjust behavior for field problems on AMD systems
  ACPI: PM: s2idle: Add support for new Microsoft UUID
  ACPI: PM: s2idle: Add support for multiple func mask
  ACPI: PM: s2idle: Refactor common code
  ACPI: PM: s2idle: Use correct revision id
  ACPI: power: Use dev_dbg() to print some messages
  ACPI: sleep: Fix acpi_pm_pre_suspend() kernel-doc
  ACPI: power: Rework turning off unused power resources
  ACPI: power: Save the last known state of each power resource
  ACPI: power: Use u8 as the power resource state data type
  ACPI: PM / fan: Put fan device IDs into separate header file
  ACPI: PM: s2idle: Add missing LPS0 functions for AMD

* acpi-processor:
  ACPI: processor_throttling: Fix several coding style issues
  ACPI: processor_throttling: Remove redundant initialization of 'obj'
  ACPI: processor idle: Fix up C-state latency if not ordered

* acpi-resources:
  ACPI: resources: Add checks for ACPI IRQ override

* acpi-bus:
  ACPI: Remove redundant clearing of context->ret.pointer from acpi_run_osc()

* acpi-scan:
  ACPI: scan: Fix race related to dropping dependencies
  ACPI: scan: Reorganize acpi_device_add()
  ACPI: scan: Fix device object rescan in acpi_scan_clear_dep()
  ACPI: scan: Make acpi_walk_dep_device_list()
  ACPI: scan: Rearrange acpi_dev_get_first_consumer_dev_cb()
  ACPI: scan: Define acpi_bus_put_acpi_device() as static inline
  ACPI: scan: initialize local variable to avoid garbage being returned
  ACPI: scan: Add function to fetch dependent of ACPI device
  ACPI: scan: Extend acpi_walk_dep_device_list()
  ACPI: scan: Rearrange dep_unmet initialization

* acpica:
  ACPICA: Add PRMT module header to facilitate parsing
  ACPICA: Update version to 20210604
  ACPICA: Add support for PlatformRtMechanism OperationRegion handler
  ACPICA: iASL: add disassembler support for PRMT
  ACPICA: Add the CFMWS structure definition to the CEDT table
  ACPICA: Add defines for the CXL Host Bridge Structure (CHBS)
  ACPICA: iASL: Add support for the BDAT ACPI table
  ACPICA: Add _PLD panel positions
  ACPICA: Use ACPI_FALLTHROUGH
  ACPICA: iASL Table Compiler: Add full support for RGRT ACPI table
  ACPICA: iASL: Add support for the SVKL table
  ACPICA: iASL: Finish support for the IVRS ACPI table
  ACPICA: Fix memory leak caused by _CID repair function
  ACPICA: Add SVKL table headers
  ACPICA: ACPI 6.4: MADT: add Multiprocessor Wakeup Mailbox Structure

* devprop:
  device property: Unify access to of_node
  ACPI: scan: Constify acpi_dma_supported() helper function
  ACPI: property: Constify stubs for CONFIG_ACPI=n case
  ACPI: IORT: Handle device properties with software node API
  device property: Retrieve fwnode from of_node via accessor

…m/linux/kernel/git/tip/tip

Pull scheduler fix from Borislav Petkov:
 "A single fix to restore fairness between control groups with equal
  priority"

* tag 'sched_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Correctly insert cfs_rq's to list on unthrottle

…linux/kernel/git/tip/tip

Pull irq fix from Borislav Petkov:
 "A single fix for GICv3 to not take an interrupt in an NMI context"

* tag 'irq_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entry

…linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
 "A first set of urgent fixes to the FPU/XSTATE handling mess^W code.
  (There's a lot more in the pipe):

   - Prevent corruption of the XSTATE buffer in signal handling by
     validating what is being copied from userspace first.

   - Invalidate other task's preserved FPU registers on XRSTOR failure
     (#PF) because latter can still modify some of them.

   - Restore the proper PKRU value in case userspace modified it

   - Reset FPU state when signal restoring fails

  Other:

   - Map EFI boot services data memory as encrypted in a SEV guest so
     that the guest can access it and actually boot properly

   - Two SGX correctness fixes: proper resources freeing and a NUMA fix"

* tag 'x86_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Avoid truncating memblocks for SGX memory
  x86/sgx: Add missing xa_destroy() when virtual EPC is destroyed
  x86/fpu: Reset state for all signal restore failures
  x86/pkru: Write hardware init value to PKRU when xstate is init
  x86/process: Check PF_KTHREAD and not current->mm for kernel threads
  x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
  x86/fpu: Prevent state corruption in __fpu__restore_sig()
  x86/ioremap: Map EFI-reserved memory as encrypted for SEV

…el/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Fix initrd corruption caused by our recent change to use relative jump
  labels.

  Fix a crash using perf record on systems without a hardware PMU
  backend.

  Rework our 64-bit signal handling slighty to make it more closely
  match the old behaviour, after the recent change to use unsafe user
  accessors.

  Thanks to Anastasia Kovaleva, Athira Rajeev, Christophe Leroy, Daniel
  Axtens, Greg Kurz, and Roman Bolshakov"

* tag 'powerpc-5.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix crash in perf_instruction_pointer() when ppmu is not set
  powerpc: Fix initrd corruption with relative jump labels
  powerpc/signal64: Copy siginfo before changing regs->nip
  powerpc/mem: Add back missing header to fix 'no previous prototype' error

….org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix refcount usage when processing PERF_RECORD_KSYMBOL.

 - 'perf stat' metric group fixes.

 - Fix 'perf test' non-bash issue with stat bpf counters.

 - Update unistd, in.h and socket.h with the kernel sources, silencing
   perf build warnings.

* tag 'perf-tools-fixes-for-v5.13-2021-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  tools headers UAPI: Sync asm-generic/unistd.h with the kernel original
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf test: Fix non-bash issue with stat bpf counters
  perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL
  perf metricgroup: Return error code from metricgroup__add_metric_sys_event_iter()
  perf metricgroup: Fix find_evsel_group() event selector

…linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A build fix to always build modules with the 'medany' code model, as
   the module loader doesn't support 'medlow'.

 - A Kconfig warning fix for the SiFive errata.

 - A pair of fixes that for regressions to the recent memory layout
   changes.

 - A fix for the FU740 device tree.

* tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: fu740: fix cache-controller interrupts
  riscv: Ensure BPF_JIT_REGION_START aligned with PMD size
  riscv: kasan: Fix MODULES_VADDR evaluation due to local variables' name
  riscv: sifive: fix Kconfig errata warning
  riscv32: Use medany C model for modules

…git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0
   when pending requests are purged.

 - Two fixes for the machine check handler in the entry code.

* tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: Fix hanging ioctl caused by wrong msg counter
  s390/mcck: fix invalid KVM guest condition check
  s390/mcck: fix calculation of SIE critical section size

To pick the changes in:

  3218274 ("icmp: don't send out ICMP messages with a source address of 0.0.0.0")

That don't result in any change in tooling, as INADDR_ are not used to
generate id->string tables used by 'perf trace'.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  8b1462b ("quota: finish disable quotactl_path syscall")

Those headers are used in some arches to generate the syscall table used
in 'perf trace' to translate syscall numbers into strings.

This addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h

Cc: Jan Kara <jack@suse.cz>
Cc: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  ea6932d ("net: make get_net_ns return error if NET_NS is disabled")

That don't result in any changes in the tables generated from that
header.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
  diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h

Cc: Changbin Du <changbin.du@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

$(( .. )) is a bash feature but the test's interpreter is !/bin/sh,
switch the code to use expr.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210617184216.2075588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ASan reported a memory leak of BPF-related ksymbols map and dso. The
leak is caused by refount never reaching 0, due to missing __put calls
in the function machine__process_ksymbol_register.

Once the dso is inserted in the map, dso__put() should be called
(map__new2() increases the refcount to 2).

The same thing applies for the map when it's inserted into maps
(maps__insert() increases the refcount to 2).

  $ sudo ./perf record -- sleep 5
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]

  =================================================================
  ==297735==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 6992 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20
      #2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10
      [...]

  Indirect leak of 8702 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20
      #2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9
      #3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21
      [...]

  Indirect leak of 1520 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
      #2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8
      [...]

  Indirect leak of 1406 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
      #2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8
      [...]

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…event_iter()

The error code is not set at all in the sys event iter function.

This may lead to an uninitialized value of "ret" in
metricgroup__add_metric() when no CPU metric is added.

Fix by properly setting the error code.

It is not necessary to init "ret" to 0 in metricgroup__add_metric(), as
if we have no CPU or sys event metric matching, then "has_match" should
be 0 and "ret" is set to -EINVAL.

However gcc cannot detect that it may not have been set after the
map_for_each_metric() loop for CPU metrics, which is strange.

Fixes: be335ec ("perf metricgroup: Support adding metrics for system PMUs")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following command segfaults on my x86 broadwell:

  $ ./perf stat  -M frontend_bound,retiring,backend_bound,bad_speculation sleep 1
  WARNING: grouped events cpus do not match, disabling group:
    anon group { raw 0x10e }
    anon group { raw 0x10e }
  perf: util/evsel.c:1596: get_group_fd: Assertion `!(!leader->core.fd)' failed.
  Aborted (core dumped)

The issue shows itself as a use-after-free in evlist__check_cpu_maps(),
whereby the leader of an event selector (evsel) has been deleted (yet we
still attempt to verify for an evsel).

Fundamentally the problem comes from metricgroup__setup_events() ->
find_evsel_group(), and has developed from the previous fix attempt in
commit 9c880c2 ("perf metricgroup: Fix for metrics containing
duration_time").

The problem now is that the logic in checking if an evsel is in the same
group is subtly broken for the "cycles" event. For the "cycles" event,
the pmu_name is NULL; however the logic in find_evsel_group() may set an
event matched against "cycles" as used, when it should not be.

This leads to a condition where an evsel is set, yet its leader is not.

Fix the check for evsel pmu_name by not matching evsels when either has a
NULL pmu_name.

There is still a pre-existing metric issue whereby the ordering of the
metrics may break the 'stat' function, as discussed at:
https://lore.kernel.org/lkml/49c6fccb-b716-1bf0-18a6-cace1cdb66b9@huawei.com/

Fixes: 9c880c2 ("perf metricgroup: Fix for metrics containing duration_time")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a Thinkpad T450S
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The order of interrupt numbers is incorrect.

The order for FU740 is: DirError, DataError, DataFail, DirFail

From SiFive FU740-C000 Manual:
19 - L2 Cache DirError
20 - L2 Cache DirFail
21 - L2 Cache DataError
22 - L2 Cache DataFail

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Andreas reported commit fc85047 ("riscv: bpf: Avoid breaking W^X")
breaks booting with one kind of defconfig, I reproduced a kernel panic
with the defconfig:

[    0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220
[    0.139159] Oops [#1]
[    0.139303] Modules linked in:
[    0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1
[    0.139934] Hardware name: riscv-virtio,qemu (DT)
[    0.140193] epc : __memset+0xc4/0xfc
[    0.140416]  ra : skb_flow_dissector_init+0x1e/0x82
[    0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0
[    0.140878]  gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158
[    0.141156]  t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0
[    0.141424]  s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000
[    0.141654]  a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064
[    0.141893]  a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff
[    0.142126]  s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088
[    0.142353]  s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438
[    0.142584]  s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac
[    0.142810]  s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000
[    0.143042]  t5 : 0000000000000155 t6 : 00000000000003ff
[    0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f
[    0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc
[    0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60
[    0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168
[    0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224
[    0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110
[    0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc
[    0.145124] ---[ end trace f1e9643daa46d591 ]---

After some investigation, I think I found the root cause: commit
2bfc6cd ("move kernel mapping outside of linear mapping") moves
BPF JIT region after the kernel:

| #define BPF_JIT_REGION_START	PFN_ALIGN((unsigned long)&_end)

The &_end is unlikely aligned with PMD size, so the front bpf jit
region sits with part of kernel .data section in one PMD size mapping.
But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is
called to make the first bpf jit prog ROX, we will make part of kernel
.data section RO too, so when we write to, for example memset the
.data section, MMU will trigger a store page fault.

To fix the issue, we need to ensure the BPF JIT region is PMD size
aligned. This patch acchieve this goal by restoring the BPF JIT region
to original position, I.E the 128MB before kernel .text section. The
modification to kasan_init.c is inspired by Alexandre.

Fixes: fc85047 ("riscv: bpf: Avoid breaking W^X")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

commit 2bfc6cd ("riscv: Move kernel mapping outside of linear
mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules
mapping. Currently, MODULES_VADDR is defined as below for RV64:

| #define MODULES_VADDR   (PFN_ALIGN((unsigned long)&_end) - SZ_2G)

But kasan_init() has two local variables which are also named as _start,
_end, so MODULES_VADDR is evaluated with the local variable _end
rather than the global "_end" as we expected. Fix this issue by
renaming the two local variables.

Fixes: 2bfc6cd ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>