The normal sequence is that the clock provider registers clk to
the clock framework, and the clock framework manages the clock resources
of the system. Clk consumers obtain clk through the clock framework API,
enable and disable clk.

Not all clk registered through the clock provider will be used
by the clock consumer, so the clock framework has a function
late_initcall_sync(clk_disable_unused); disables the unused clk.

Now we modularize the clock provider and some consumers, which will
cause late_initcall_sync(clk_disable_unused); cannot work properly, so
increase the sys node.

Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>

* clk-qcom:
  clk: qcom: a53-pll: Add MSM8939 a53pll support
  dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support
  clk: qcom: a53pll/mux: Use unique clock name
  clk: qcom: apcs-msm8916: Flag a53mux instead of a53pll as critical
  clk: qcom: gpucc-sm8150: Add SC8180x support
  clk: qcom: smd-rpm: Add mdm9607 clocks
  dt-bindings: clock: qcom: rpmcc: Document MDM9607 compatible
  clk: qcom: rpmcc: Add support for MSM8953 RPM clocks.
  dt-bindings: clock: qcom-rpmcc: Add compatible for MSM8953 SoC
  clk: qcom: smd: Add support for SM6115 rpm clocks
  clk: qcom: smd: Add support for SM6125 rpm clocks

MSM8939 has 3 a53pll clocks with different frequency table for Cluster0,
Cluster1 and CCI.  It adds function qcom_a53pll_get_freq_tbl() to create
pll_freq_tbl from OPP, so that those a53pll frequencies can be defined
in DT with operating-points-v2 bindings rather than being coded in the
driver.  In this case, one compatible rather than three would be needed
for these 3 a53pll clocks.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-5-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Update qcom,a53pll bindings for MSM8939 support:

 - Add optional operating-points-v2 property
 - Add MSM8939 specific compatible

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-4-shawn.guo@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets
three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache
Coherent Interconnect).  That said, a53pll/mux clock needs to be named
uniquely.  Append @unit-address of device node to the clock name, so
that a53pll/mux will be named like below on MSM8939.

  a53pll@b016000
  a53pll@b116000
  a53pll@b1d0000

  a53mux@b1d1000
  a53mux@b011000
  a53mux@b111000

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-3-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The clock source for MSM8916 cpu cores is like below.

                        |\
         a53pll --------| \ a53mux     +------+
                        | |------------| cpus |
     gpll0_vote --------| /            +------+
                        |/

So a53mux rather than a53pll is actually the parent clock of cpu cores.
It makes more sense to flag a53mux as critical instead, so that when
either a53pll or gpll0_vote is used by cpu cores, the clock will be kept
enabled while the other can be disabled.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-2-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The GPU clock controller found in SC8180x is a variant of the same block
found in SM8150, but with one additional clock frequency for the
gmu_clk_src clock.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721225329.3035779-1-bjorn.andersson@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add support for RPM-managed clocks on the MDM9607 platform.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210805222400.39027-2-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add the dt-binding for the RPM Clock Controller on the MDM9607 SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210805222400.39027-1-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add definitions for RPM clocks used on MSM8953 platform.

Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/QZ0fkozlubDdc7CvqjZPhAviFmjJ28ht7Y4PT3rYM@cp4-web-038.plabs.ch
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add compatible for MSM8953 SoC.

Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/c662hoLme5MIdelk5BVPsVgN77IqTLS0KwYwpauJiDs@cp3-web-047.plabs.ch
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add rpm smd clocks, PMIC and bus clocks which are required on
SM4250/6115 for clients to vote on.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210731164827.2756798-2-iskren.chernev@gmail.com
[sboyd@kernel.org: Drop duplicate define, merge with sm6125 support]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add rpm smd clocks, PMIC and bus clocks which are required on SM6125
for clients to vote on.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210730215924.733350-2-martin.botka@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

* clk-fixes:
  clk: qcom: gdsc: Ensure regulator init state matches GDSC state
  clk: imx6q: fix uart earlycon unwork

As GDSCs are registered and found to be already enabled gdsc_init()
ensures that 1) the kernel state matches the hardware state, and 2)
votable GDSCs are properly enabled from this master as well.

But as the (optional) supply regulator is enabled deep into
gdsc_toggle_logic(), which is only executed for votable GDSCs, the
kernel's state of the regulator might not match the hardware. The
regulator might be automatically turned off if no other users are
present or the next call to gdsc_disable() would cause an unbalanced
regulator_disable().

Given that the votable case deals with an already enabled GDSC, most of
gdsc_enable() and gdsc_toggle_logic() can be skipped. Reduce it to just
clearing the SW_COLLAPSE_MASK and enabling hardware control to simply
call regulator_enable() in both cases.

The enablement of hardware control seems to be an independent property
from the GDSC being enabled, so this is moved outside that conditional
segment.

Lastly, as the propagation of ALWAYS_ON to GENPD_FLAG_ALWAYS_ON needs to
happen regardless of the initial state this is grouped together with the
other sc->pd updates at the end of the function.

Cc: stable@vger.kernel.org
Fixes: 37416e5 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721224056.3035016-1-bjorn.andersson@linaro.org
[sboyd@kernel.org: Rephrase commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The earlycon depends on the bootloader setup UART clocks being retained.
There're actually two uart clocks (ipg, per) on MX6QDL,
but the 'Fixes' commit change to register only one which means
another clock may be disabled during booting phase
and result in the earlycon unwork.

Cc: stable@vger.kernel.org # v5.10+
Fixes: 379c9a2 ("clk: imx: Fix reparenting of UARTs not associated with stdout")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210702085438.1988087-1-aisheng.dong@nxp.com
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

 - Migrate some clk drivers to clk_divider_ops.determine_rate

* clk-determine-divider:
  clk: stm32mp1: Switch to clk_divider.determine_rate
  clk: stm32h7: Switch to clk_divider.determine_rate
  clk: stm32f4: Switch to clk_divider.determine_rate
  clk: bcm2835: Switch to clk_divider.determine_rate
  clk: divider: Implement and wire up .determine_rate by default

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-7-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-6-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-5-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-rpi-kernel@lists.infradead.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).

Implement .determine_rate in addition to .round_rate so drivers that are
using clk_divider_{ro_,}ops can benefit from this by default. Keep the
.round_rate callback for now since some drivers rely on
clk_divider_ops.round_rate being implemented.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-2-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

* clk-cleanup:
  clk: palmas: Add a missing SPDX license header
  clk: Align provider-specific CLK_* bit definitions

Add the missing SPDX license header to drivers/clk/clk-palmas.c.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210731132226.424853-1-wangborong@cdjrlc.com
[sboyd@kernel.org: Also remove boilerplate from comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The definition of CLK_MULTIPLIER_ROUND_CLOSEST is not aligned to the two
bit definitions next to it.  A deeper inspection reveals that the
alignment of CLK_MULTIPLIER_ROUND_CLOSEST does match the most common
alignment.

Align the bit definitions for the various provider types throughout the
file at 40 columns, to increase uniformity.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5468cd9e50cda8fc59cb6baab9413c6c0de1a974.1626257689.git.geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

* clk-renesas:
  clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
  dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
  clk: renesas: r9a07g044: Add clock and reset entries for ADC
  clk: renesas: r9a07g044: Add clock and reset entries for CANFD
  clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
  clk: renesas: r9a07g044: Add GPIO clock and reset entries
  clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
  clk: renesas: r9a07g044: Add USB clocks/resets
  clk: renesas: r9a07g044: Add DMAC clocks/resets
  clk: renesas: r9a07g044: Add I2C clocks/resets
  clk: renesas: r8a779a0: Add the DSI clocks
  clk: renesas: r8a779a0: Add the DU clock
  clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
  clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
  clk: renesas: rzg2l: Avoid mixing error pointers and NULL
  clk: renesas: rzg2l: Fix a double free on error
  clk: renesas: rzg2l: Fix return value and unused assignment
  clk: renesas: rzg2l: Remove unneeded semicolon

Pull in -rc2 so we can get Renesas clk updates based on -rc2.

…m/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add display (DU and DSI) clocks on R-Car V3U
 - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
  resets on RZ/G2L
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
  dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
  clk: renesas: r9a07g044: Add clock and reset entries for ADC
  clk: renesas: r9a07g044: Add clock and reset entries for CANFD
  clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
  clk: renesas: r9a07g044: Add GPIO clock and reset entries
  clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
  clk: renesas: r9a07g044: Add USB clocks/resets
  clk: renesas: r9a07g044: Add DMAC clocks/resets
  clk: renesas: r9a07g044: Add I2C clocks/resets
  clk: renesas: r8a779a0: Add the DSI clocks
  clk: renesas: r8a779a0: Add the DU clock
  clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
  clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
  clk: renesas: rzg2l: Avoid mixing error pointers and NULL
  clk: renesas: rzg2l: Fix a double free on error
  clk: renesas: rzg2l: Fix return value and unused assignment
  clk: renesas: rzg2l: Remove unneeded semicolon

* clk-fixes:
  clk: fix leak on devm_clk_bulk_get_all() unwind

clk_bulk_get_all() allocates an array of struct clk_bulk data for us
(unlike clk_bulk_get()), so we need to free it. Let's use the
clk_bulk_put_all() helper.

kmemleak complains, on an RK3399 Gru/Kevin system:

unreferenced object 0xffffff80045def00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294667682 (age 86.394s)
  hex dump (first 32 bytes):
    44 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00  D2`.............
    48 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00  H2`.............
  backtrace:
    [<00000000742860d6>] __kmalloc+0x22c/0x39c
    [<00000000b0493f2c>] clk_bulk_get_all+0x64/0x188
    [<00000000325f5900>] devm_clk_bulk_get_all+0x58/0xa8
    [<00000000175b9bc5>] dwc3_probe+0x8ac/0xb5c
    [<000000009169e2f9>] platform_drv_probe+0x9c/0xbc
    [<000000005c51e2ee>] really_probe+0x13c/0x378
    [<00000000c47b1f24>] driver_probe_device+0x84/0xc0
    [<00000000f870fcfb>] __device_attach_driver+0x94/0xb0
    [<000000004d1b92ae>] bus_for_each_drv+0x8c/0xd8
    [<00000000481d60c3>] __device_attach+0xc4/0x150
    [<00000000a163bd36>] device_initial_probe+0x1c/0x28
    [<00000000accb6bad>] bus_probe_device+0x3c/0x9c
    [<000000001a199f89>] device_add+0x218/0x3cc
    [<000000001bd84952>] of_device_add+0x40/0x50
    [<000000009c658c29>] of_platform_device_create_pdata+0xac/0x100
    [<0000000021c69ba4>] of_platform_bus_create+0x190/0x224

Fixes: f08c2e2 ("clk: add managed version of clk_bulk_get_all")
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20210731025950.2238582-1-briannorris@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

* clk-fixes:
  clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_ops

Implement disable_unused() callback of tegra_clk_sdmmc_mux_ops to fix
imbalanced disabling of the unused MMC clock on Tegra210 Jetson Nano.

Fixes: c592c8a ("clk: tegra: Fix refcounting of gate clocks")
Reported-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano
Tested-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717112742.7196-1-digetx@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

* clk-qcom:
  dt-bindings: clk: qcom: smd-rpm: Document SM6125 compatible
  dt-bindings: clock: qcom: rpmcc: Document SM6115 compatible
  clk: qcom: dispcc-sm8250: Add additional parent clocks for DP

Document the newly added compatible for sm6125 rpmcc.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210629102624.194378-3-martin.botka@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add the dt-binding for the RPM Clock Controller on the SM4250/6115 SoCs.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210627185927.695411-3-iskren.chernev@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>