No description, website, or topics provided.
Switch branches/tags
Nothing to show
Clone or download
Permalink
Failed to load latest commit information.
README.md Readme.md updated May 5, 2018
_config.yml undo theme modification May 5, 2018
top_page1.png Readme.md revised to behave as webpage Oct 2, 2017

README.md

8085 Simulator

Programming made easy

By JUBIN MITRA

With the academic learning purpose in mind the 8085 simulator software is designed. It helps in get started easily with example codes, and to learn the architecture playfully. It also provides a trainer kit as an appealing functional alternative to real hardware. The users can write assembly code easily and get results quickly without even having the actual hardware.

The software is shared under opensource GNU license.

The project is migrated from codeplex (http://8085simulator.codeplex.com/) to github.

Screenshot:

How to run the Program ?

Simply double clicking the program, it should run. But if it opens like a zip file, then you can be rest assured , that you do not have java installed on your machine. Then download it from the link given below.

System Requirements:

Need Java 6 Update 16 http://javadl.sun.com/webapps/download/AutoDL?BundleId=33889

Recommended Download :

Previous Versions :

Source Code :

Features:

  • Assembler Editor -- Can load Programs written in other simulator -- Auto-correct and auto-indent features -- Supports assembler directives -- Number parameters can be given in binary, decimal and hexadecimal format -- Supports writing of comments -- Supports labeling of instructions, even in macros -- Has error checking facility -- Syntax Highlighting

  • Disassembler Editor -- Supports loading of Intel specific hex file format -- It can successfully reverse trace the original program from the assembly code, in most of the cases -- Syntax Highlighting and Auto Spacing

  • Assembler Workspace -- Contains the Address field, Label, Mnemonics, Hex-code, Mnemonic Size, M-Cycles and T-states -- Static Timing diagram of all instruction sets are supported -- Dynamic Timing diagram during step by step simulation -- It has error checking facility also

  • Memory Editor -- Can directly update data in a specified memory location -- It has 3 types of interface, user can choose from it according to his need. -- Show entire memory content -- Show only loaded memory location -- Store directly to specified memory location -- Allows user to choose memory range

  • I/O Editor -- It is necessary for peripheral interfacing. -- Enables direct editing of content

  • Interrupt Editor -- All possible interrupts are supported. Interrupts are triggered by pressing the appropriate column (INTR, TRAP, RST 7.5, RST 6.5, RST 5.5) on the interrupt table. The simulation can be reset any time by pressing the clear memory in the settings tab.

  • Debugger -- Support of breakpoints -- Step by step execution/debugging of program. -- It supports both forward and backward traversal of programs. -- Allows continuation of program from the break-point.

  • Simulator -- There are 3 level of speed for simulation: -- Step-by-step : Automatic line by line execution with each line highlighting. The time to halt at each line is be decided by the user. -- Normal : Full execution with reflecting intermittent states periodically. -- Ultimate : Full execution with reflecting final state directly. -- There are 2 modes of simulator engine: -- Run all at a Time : It takes the current settings from the simulation speed level and starts execution accordingly. -- Step by Step : It is manual mode of control of FORWARD and BACKWARD traversal of instruction set. It also displays the in-line comment if available for currently executed instruction. -- Allows setting of starting address for the simulator -- Users can choose the mnemonic where program execution should terminate

  • Helper -- Help on the mnemonics is integrated -- CODE WIZARD is a tool added to enable users with very little knowledge of assembly code could also 8085 assembly programs. -- Already loaded with plenty SAMPLE programs -- Dynamic loading of user code if placed in user_code folder -- It also includes a user manual

  • Printing -- Assembler Content -- Workspace Content -- Register Bank --> Each register content is accompanied with its equivalent binary value* -- Accumulator, Reg B, Reg C, Reg D, Reg E, Reg H, Reg L, Memory (M) -- Flag Register -- Stack Pointer (SP) -- Memory Pointer (HL) -- Program Status Word (PSW) -- Program Counter (PC) -- Clock Cycle Counter -- Instruction Counter -- Special blocks for monitoring Flag register and the usage of SIM and RIM instruction

  • Crash Recovery -- Can recover programs lost due to sudden shutdown or crash of application

  • 8085 TRAINER KIT -- It simulates the kit as if the user is working in the lab. It basically uses the same simulation engine at the back-end

  • TOOLS -- Insert DELAY Subroutine TOOL --> It is a powerful wizard to generate delay subroutine with user defined delay using any sets of register for a particular operating frequency of 8085 microprocessor. -- Interrupt Service Subroutine TOOL --> It is a handy way to set memory values at corresponding vector interrupt address -- Number Conversion Tool --> It is a portable interconversion tool for Hexadecimal, decimal and binary numbers. So, that user do not need to open separate calculator for it.