-Update HistoryV1.2.0 / 30-December-2016
+Update HistoryV1.2.2 / 14-April-2017
+Main
+Changes - General updates
+to fix known defects and enhancements implementation
- HAL CAN update
- Add
+ management of overrun error.
- Allow
+ possibility to receive messages from the 2 RX FIFOs in parallel via
+ interrupt.
- Fix message
+ lost issue with specific sequence of transmit requests.
- Handle
+ transmission failure with error callback, when NART is enabled.
- Add __HAL_CAN_CANCEL_TRANSMIT() call to abort transmission when
+ timeout is reached
V1.2.1 / 24-March-2017
+Main
+Changes - Update CHM UserManuals to support LL drivers
- General updates
+to fix known defects and enhancements implementation
- HAL DMA update
- Update HAL_DMA_Init() function to adjust the compatibility check between FIFO threshold and burst configuration
- HAL MMC update
- Update HAL_MMC_InitCard() function with proper initialization sequence adding a delay after MMC clock enable
- Update MMC_DMAError() function ignore DMA FIFO error as not impacting the data transfer
- HAL SD update
- Update HAL_SD_InitCard() function with proper initialization sequence adding a delay after SD clock enable
- Update SD_DMAError() function ignore DMA FIFO error as not impacting the data transfer
- HAL NAND update
- Update HAL_NAND_Address_Inc() function implementation for proper plane number check
- LL SDMMC update
- Update SDMMC_DATATIMEOUT value with appropriate value needed by reading and writing operations of SD and MMC cards
- LL RTC update
- LL_RTC_TIME_Get() and LL_RTC_DATE_Get() inline macros optimization
- LL ADC update
- Fix wrong ADC group injected sequence configuration
- LL_ADC_INJ_SetSequencerRanks()
+and LL_ADC_INJ_GetSequencerRanks() API's update to take in
+consideration the ADC number of conversions
- Update the defined values for ADC group injected seqencer ranks
V1.2.0 / 30-December-2016
Main
Changes - Official release to add the support of STM32F722xx, STM32F723xx, STM32F732xx and STM32F733xx devices
- Add Low Layer drivers allowing performance and footprint optimization
- Low
Layer drivers APIs provide register level programming: require deep
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32_hal_legacy.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32_hal_legacy.h
index 112662abd72..3f90e3a03c6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32_hal_legacy.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32_hal_legacy.h
@@ -2,14 +2,14 @@
******************************************************************************
* @file stm32_hal_legacy.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file contains aliases definition for the STM32Cube HAL constants
* macros and functions maintained for legacy purpose.
******************************************************************************
* @attention
*
- *
© COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.c
index f4e49eb2fa4..bf6bb9388d6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief HAL module driver.
* This is the common part of the HAL initialization
*
@@ -23,7 +23,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -68,11 +68,11 @@
* @{
*/
/**
- * @brief STM32F7xx HAL Driver version number V1.2.0
+ * @brief STM32F7xx HAL Driver version number V1.2.2
*/
#define __STM32F7xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __STM32F7xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
-#define __STM32F7xx_HAL_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F7xx_HAL_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
#define __STM32F7xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F7xx_HAL_VERSION ((__STM32F7xx_HAL_VERSION_MAIN << 24)\
|(__STM32F7xx_HAL_VERSION_SUB1 << 16)\
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.h
index 1636e610db2..87b9554401a 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal.h
@@ -2,14 +2,14 @@
******************************************************************************
* @file stm32f7xx_hal.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -57,7 +57,7 @@
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
-/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
* @{
*/
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.c
index 953debb17d7..c4960492bec 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_adc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file provides firmware functions to manage the following
* functionalities of the Analog to Digital Convertor (ADC) peripheral:
* + Initialization and de-initialization functions
@@ -164,7 +164,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.h
index 73ba1ee2e80..687f9cda02c 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_adc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of ADC HAL extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -490,7 +490,7 @@ typedef struct
/** @defgroup ADC_Exported_Macros ADC Exported Macros
* @{
*/
-
+
/** @brief Reset ADC handle state
* @param __HANDLE__: ADC handle
* @retval None
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.c
index 605a0bb0b9d..2c910931276 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_adc_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file provides firmware functions to manage the following
* functionalities of the ADC extension peripheral:
* + Extended features functions
@@ -44,7 +44,7 @@
=================================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart()
- (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+ (+) Wait for end of conversion using HAL_ADCEx_InjectedPollForConversion(), at this stage
user can specify the value of timeout according to his end application
(+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
@@ -86,7 +86,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.h
index 0bd8dd1451b..e1aac44f920 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_adc_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_adc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of ADC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -126,9 +126,6 @@ typedef struct
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
configure a channel on injected group can impact the configuration of other channels previously set. */
}ADC_InjectionConfTypeDef;
-/**
- * @}
- */
/**
* @brief ADC Configuration multi-mode structure definition
@@ -252,7 +249,7 @@ typedef struct
/** @addtogroup ADCEx_Exported_Functions
* @{
*/
-
+
/** @addtogroup ADCEx_Exported_Functions_Group1
* @{
*/
@@ -290,7 +287,7 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_
/**
* @}
*/
-
+
/* Private macros ------------------------------------------------------------*/
/** @defgroup ADCEx_Private_Macros ADC Private Macros
* @{
@@ -333,7 +330,7 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
- ((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START))
+ ((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START))
#define IS_ADC_INJECTED_RANK(__RANK__) (((__RANK__) == ADC_INJECTED_RANK_1) || \
((__RANK__) == ADC_INJECTED_RANK_2) || \
((__RANK__) == ADC_INJECTED_RANK_3) || \
@@ -351,7 +348,7 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_
/**
* @}
*/
-
+
/* Private functions ---------------------------------------------------------*/
/** @defgroup ADCEx_Private_Functions ADC Private Functions
* @{
@@ -364,7 +361,7 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_
/**
* @}
*/
-
+
/**
* @}
*/
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.c
index a074f0c852a..6b122b823ff 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_can.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief CAN HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Controller Area Network (CAN) peripheral:
@@ -78,7 +78,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -557,8 +557,8 @@ __weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
*/
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
{
- uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
- uint32_t tickstart = 0;
+ uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+ uint32_t tickstart = 0U;
/* Check the parameters */
assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
@@ -572,15 +572,21 @@ HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
/* Process locked */
__HAL_LOCK(hcan);
- if(hcan->State == HAL_CAN_STATE_BUSY_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
+ /* Change CAN state */
+ switch(hcan->State)
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
+ case(HAL_CAN_STATE_BUSY_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_READY */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ break;
}
/* Select one empty transmit mailbox */
@@ -596,41 +602,41 @@ HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
{
transmitmailbox = CAN_TXMAILBOX_2;
}
-
+
/* Set up the Id */
hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
if (hcan->pTxMsg->IDE == CAN_ID_STD)
{
assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \
hcan->pTxMsg->RTR);
}
else
{
assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \
hcan->pTxMsg->IDE | \
hcan->pTxMsg->RTR);
}
/* Set up the DLC */
- hcan->pTxMsg->DLC &= (uint8_t)0x0000000FU;
+ hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
/* Set up the data field */
- hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[0]));
- hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[4]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[2U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[1U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[0U]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[6U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[5U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[4U]));
/* Request transmission */
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
- /* Get tick */
+ /* Get tick */
tickstart = HAL_GetTick();
/* Check End of transmission flag */
@@ -639,26 +645,36 @@ HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
hcan->State = HAL_CAN_STATE_TIMEOUT;
+
+ __HAL_CAN_CANCEL_TRANSMIT(hcan, transmitmailbox);
+
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
}
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
- }
- else
+
+ /* Change CAN state */
+ switch(hcan->State)
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
+ case(HAL_CAN_STATE_BUSY_TX_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_BUSY_TX */
+ hcan->State = HAL_CAN_STATE_READY;
+ break;
}
-
+
/* Process unlocked */
__HAL_UNLOCK(hcan);
@@ -683,7 +699,7 @@ HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
*/
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
{
- uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+ uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
/* Check the parameters */
assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
@@ -696,7 +712,7 @@ HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
{
/* Process Locked */
__HAL_LOCK(hcan);
-
+
/* Select one empty transmit mailbox */
if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
{
@@ -710,66 +726,72 @@ HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
{
transmitmailbox = CAN_TXMAILBOX_2;
}
-
+
/* Set up the Id */
hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
if(hcan->pTxMsg->IDE == CAN_ID_STD)
{
assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \
hcan->pTxMsg->RTR);
}
else
{
assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \
hcan->pTxMsg->IDE | \
hcan->pTxMsg->RTR);
}
/* Set up the DLC */
- hcan->pTxMsg->DLC &= (uint8_t)0x0000000FU;
+ hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
/* Set up the data field */
- hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[0]));
- hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[4]));
-
- if(hcan->State == HAL_CAN_STATE_BUSY_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
+ hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[2U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[1U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[0U]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[6U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[5U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[4U]));
+
+ /* Change CAN state */
+ switch(hcan->State)
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
+ case(HAL_CAN_STATE_BUSY_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_READY */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ break;
}
-
+
/* Set CAN error code to none */
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
-
+
/* Process Unlocked */
__HAL_UNLOCK(hcan);
-
+
+ /* Request transmission */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+
/* Enable Error warning, Error passive, Bus-off,
- Last error and Error Interrupts */
+ Last error and Error Interrupts */
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR |
- CAN_IT_TME);
-
- /* Request transmission */
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+ CAN_IT_TME);
}
else
{
@@ -793,35 +815,81 @@ HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
*/
HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
{
- uint32_t tickstart = 0;
-
+ uint32_t tickstart = 0U;
+ CanRxMsgTypeDef* pRxMsg = NULL;
+
/* Check the parameters */
assert_param(IS_CAN_FIFO(FIFONumber));
-
+
+ /* Check if CAN state is not busy for RX FIFO0 */
+ if ((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Check if CAN state is not busy for RX FIFO1 */
+ if ((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
+ {
+ return HAL_BUSY;
+ }
+
/* Process locked */
__HAL_LOCK(hcan);
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+
+ /* Change CAN state */
+ if (FIFONumber == CAN_FIFO0)
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ switch(hcan->State)
+ {
+ case(HAL_CAN_STATE_BUSY_TX):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_READY */
+ hcan->State = HAL_CAN_STATE_BUSY_RX0;
+ break;
+ }
}
- else
+ else /* FIFONumber == CAN_FIFO1 */
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
+ switch(hcan->State)
+ {
+ case(HAL_CAN_STATE_BUSY_TX):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_READY */
+ hcan->State = HAL_CAN_STATE_BUSY_RX1;
+ break;
+ }
}
-
+
/* Get tick */
tickstart = HAL_GetTick();
/* Check pending message */
- while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0)
+ while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0U)
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
hcan->State = HAL_CAN_STATE_TIMEOUT;
/* Process unlocked */
@@ -830,33 +898,45 @@ HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, u
}
}
}
-
+
+ /* Set RxMsg pointer */
+ if(FIFONumber == CAN_FIFO0)
+ {
+ pRxMsg = hcan->pRxMsg;
+ }
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ pRxMsg = hcan->pRx1Msg;
+ }
+
/* Get the Id */
- hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
- if (hcan->pRxMsg->IDE == CAN_ID_STD)
+ pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ if (pRxMsg->IDE == CAN_ID_STD)
{
- hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+ pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
}
else
{
- hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+ pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
}
- hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
/* Get the DLC */
- hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
/* Get the FMI */
- hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
+ /* Get the FIFONumber */
+ pRxMsg->FIFONumber = FIFONumber;
/* Get the data field */
- hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
- hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
- hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
- hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
- hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
- hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
- hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
- hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
-
+ pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+ pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
+ pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
+ pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
+ pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+ pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
+ pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
+ pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
+
/* Release the FIFO */
if(FIFONumber == CAN_FIFO0)
{
@@ -868,18 +948,45 @@ HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, u
/* Release FIFO1 */
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
}
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+
+ /* Change CAN state */
+ if (FIFONumber == CAN_FIFO0)
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
+ switch(hcan->State)
+ {
+ case(HAL_CAN_STATE_BUSY_TX_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
+ break;
+ default: /* HAL_CAN_STATE_BUSY_RX0 */
+ hcan->State = HAL_CAN_STATE_READY;
+ break;
+ }
}
- else
+ else /* FIFONumber == CAN_FIFO1 */
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
+ switch(hcan->State)
+ {
+ case(HAL_CAN_STATE_BUSY_TX_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
+ break;
+ default: /* HAL_CAN_STATE_BUSY_RX1 */
+ hcan->State = HAL_CAN_STATE_READY;
+ break;
+ }
}
-
+
/* Process unlocked */
__HAL_UNLOCK(hcan);
@@ -895,60 +1002,96 @@ HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, u
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
-{
- uint32_t tmp = 0;
-
+{
/* Check the parameters */
assert_param(IS_CAN_FIFO(FIFONumber));
- tmp = hcan->State;
- if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_TX))
+ /* Check if CAN state is not busy for RX FIFO0 */
+ if((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
{
- /* Process locked */
- __HAL_LOCK(hcan);
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
- }
-
- /* Set CAN error code to none */
- hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+ return HAL_BUSY;
+ }
- /* Enable Error warning, Error passive, Bus-off,
- Last error and Error Interrupts */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
- CAN_IT_EPV |
- CAN_IT_BOF |
- CAN_IT_LEC |
- CAN_IT_ERR);
+ /* Check if CAN state is not busy for RX FIFO1 */
+ if((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
+ (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
+ {
+ return HAL_BUSY;
+ }
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
+ /* Process locked */
+ __HAL_LOCK(hcan);
- if(FIFONumber == CAN_FIFO0)
+ /* Change CAN state */
+ if(FIFONumber == CAN_FIFO0)
+ {
+ switch(hcan->State)
{
- /* Enable FIFO 0 message pending Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0);
+ case(HAL_CAN_STATE_BUSY_TX):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_READY */
+ hcan->State = HAL_CAN_STATE_BUSY_RX0;
+ break;
}
- else
+ }
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ switch(hcan->State)
{
- /* Enable FIFO 1 message pending Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1);
+ case(HAL_CAN_STATE_BUSY_TX):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_READY */
+ hcan->State = HAL_CAN_STATE_BUSY_RX1;
+ break;
}
-
+ }
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Enable interrupts: */
+ /* - Enable Error warning Interrupt */
+ /* - Enable Error passive Interrupt */
+ /* - Enable Bus-off Interrupt */
+ /* - Enable Last error code Interrupt */
+ /* - Enable Error Interrupt */
+ /* - Enable Transmit mailbox empty Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
+ CAN_IT_EPV |
+ CAN_IT_BOF |
+ CAN_IT_LEC |
+ CAN_IT_ERR |
+ CAN_IT_TME);
+
+ if(FIFONumber == CAN_FIFO0)
+ {
+ /* Enable FIFO 0 overrun and message pending Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0);
}
else
{
- return HAL_BUSY;
+ /* Enable FIFO 1 overrun and message pending Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1);
}
-
+
/* Return function status */
return HAL_OK;
}
@@ -1068,8 +1211,33 @@ HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
*/
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
{
- uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
-
+ uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U;
+ uint32_t errorcode = HAL_CAN_ERROR_NONE;
+
+ /* Check Overrun flag for FIFO0 */
+ tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV0);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV0);
+ if(tmp1 && tmp2)
+ {
+ /* Set CAN error code to FOV0 error */
+ errorcode |= HAL_CAN_ERROR_FOV0;
+
+ /* Clear FIFO0 Overrun Flag */
+ __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV0);
+ }
+ /* Check Overrun flag for FIFO1 */
+ tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV1);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV1);
+
+ if(tmp1 && tmp2)
+ {
+ /* Set CAN error code to FOV1 error */
+ errorcode |= HAL_CAN_ERROR_FOV1;
+
+ /* Clear FIFO1 Overrun Flag */
+ __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV1);
+ }
+
/* Check End of transmission flag */
if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
{
@@ -1078,29 +1246,48 @@ void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
if(tmp1 || tmp2 || tmp3)
{
- /* Call transmit function */
- CAN_Transmit_IT(hcan);
+ tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK0);
+ tmp2 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK1);
+ tmp3 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK2);
+ /* Check Transmit success */
+ if(tmp1 || tmp2 || tmp3)
+ {
+ /* Call transmit function */
+ CAN_Transmit_IT(hcan);
+ }
+ else /* Transmit failure */
+ {
+ /* Set CAN error code to TXFAIL error */
+ errorcode |= HAL_CAN_ERROR_TXFAIL;
+ }
+
+ /* Clear transmission status flags (RQCPx and TXOKx) */
+ SET_BIT(hcan->Instance->TSR, CAN_TSR_RQCP0 | CAN_TSR_RQCP1 | CAN_TSR_RQCP2 | \
+ CAN_FLAG_TXOK0 | CAN_FLAG_TXOK1 | CAN_FLAG_TXOK2);
}
}
-
+
tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
/* Check End of reception flag for FIFO0 */
- if((tmp1 != 0) && tmp2)
+ if((tmp1 != 0U) && tmp2)
{
/* Call receive function */
CAN_Receive_IT(hcan, CAN_FIFO0);
}
-
+
tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
/* Check End of reception flag for FIFO1 */
- if((tmp1 != 0) && tmp2)
+ if((tmp1 != 0U) && tmp2)
{
/* Call receive function */
CAN_Receive_IT(hcan, CAN_FIFO1);
}
-
+
+ /* Set error code in handle */
+ hcan->ErrorCode |= errorcode;
+
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
@@ -1171,7 +1358,7 @@ void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
/* Clear Last error code Flag */
hcan->Instance->ESR &= ~(CAN_ESR_LEC);
}
-
+
/* Call the Error call Back in case of Errors */
if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
{
@@ -1179,6 +1366,29 @@ void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
hcan->Instance->MSR = CAN_MSR_ERRI;
/* Set the CAN state ready to be able to start again the process */
hcan->State = HAL_CAN_STATE_READY;
+
+ /* Disable interrupts: */
+ /* - Disable Error warning Interrupt */
+ /* - Disable Error passive Interrupt */
+ /* - Disable Bus-off Interrupt */
+ /* - Disable Last error code Interrupt */
+ /* - Disable Error Interrupt */
+ /* - Disable FIFO 0 message pending Interrupt */
+ /* - Disable FIFO 0 Overrun Interrupt */
+ /* - Disable FIFO 1 message pending Interrupt */
+ /* - Disable FIFO 1 Overrun Interrupt */
+ /* - Disable Transmit mailbox empty Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
+ CAN_IT_EPV |
+ CAN_IT_BOF |
+ CAN_IT_LEC |
+ CAN_IT_ERR |
+ CAN_IT_FMP0|
+ CAN_IT_FOV0|
+ CAN_IT_FMP1|
+ CAN_IT_FOV1|
+ CAN_IT_TME);
+
/* Call Error callback function */
HAL_CAN_ErrorCallback(hcan);
}
@@ -1275,6 +1485,7 @@ uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
/**
* @}
*/
+
/**
* @brief Initiates and transmits a CAN frame message.
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
@@ -1283,31 +1494,37 @@ uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
*/
static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
{
- /* Disable Transmit mailbox empty Interrupt */
+ /* Disable Transmit mailbox empty Interrupt */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
if(hcan->State == HAL_CAN_STATE_BUSY_TX)
{
/* Disable Error warning, Error passive, Bus-off, Last error code
- and Error Interrupts */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
+ and Error Interrupts */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR );
}
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
- }
- else
+
+ /* Change CAN state */
+ switch(hcan->State)
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
+ case(HAL_CAN_STATE_BUSY_TX_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
+ break;
+ default: /* HAL_CAN_STATE_BUSY_TX */
+ hcan->State = HAL_CAN_STATE_READY;
+ break;
}
-
+
/* Transmission complete callback */
HAL_CAN_TxCpltCallback(hcan);
@@ -1324,69 +1541,112 @@ static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
*/
static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
{
+ uint32_t tmp1 = 0U;
+ CanRxMsgTypeDef* pRxMsg = NULL;
+
+ /* Set RxMsg pointer */
+ if(FIFONumber == CAN_FIFO0)
+ {
+ pRxMsg = hcan->pRxMsg;
+ }
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ pRxMsg = hcan->pRx1Msg;
+ }
+
/* Get the Id */
- hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
- if (hcan->pRxMsg->IDE == CAN_ID_STD)
+ pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ if (pRxMsg->IDE == CAN_ID_STD)
{
- hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+ pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
}
else
{
- hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+ pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
}
- hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
/* Get the DLC */
- hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FIFONumber */
+ pRxMsg->FIFONumber = FIFONumber;
/* Get the FMI */
- hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
/* Get the data field */
- hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
- hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
- hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
- hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
- hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
- hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
- hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
- hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+ pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+ pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
+ pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
+ pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
+ pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+ pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
+ pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
+ pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
/* Release the FIFO */
/* Release FIFO0 */
if (FIFONumber == CAN_FIFO0)
{
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
-
- /* Disable FIFO 0 message pending Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0);
+
+ /* Disable FIFO 0 overrun and message pending Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0);
}
/* Release FIFO1 */
else /* FIFONumber == CAN_FIFO1 */
{
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
-
- /* Disable FIFO 1 message pending Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1);
+
+ /* Disable FIFO 1 overrun and message pending Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1);
}
-
- if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+
+ tmp1 = hcan->State;
+ if((tmp1 == HAL_CAN_STATE_BUSY_RX0) || (tmp1 == HAL_CAN_STATE_BUSY_RX1))
{
/* Disable Error warning, Error passive, Bus-off, Last error code
and Error Interrupts */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR);
}
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+
+ /* Change CAN state */
+ if (FIFONumber == CAN_FIFO0)
{
- /* Disable CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
+ switch(hcan->State)
+ {
+ case(HAL_CAN_STATE_BUSY_TX_RX0):
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX1;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
+ break;
+ default: /* HAL_CAN_STATE_BUSY_RX0 */
+ hcan->State = HAL_CAN_STATE_READY;
+ break;
+ }
}
- else
+ else /* FIFONumber == CAN_FIFO1 */
{
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
+ switch(hcan->State)
+ {
+ case(HAL_CAN_STATE_BUSY_TX_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ break;
+ case(HAL_CAN_STATE_BUSY_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_RX0;
+ break;
+ case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
+ break;
+ default: /* HAL_CAN_STATE_BUSY_RX1 */
+ hcan->State = HAL_CAN_STATE_READY;
+ break;
+ }
}
/* Receive complete callback */
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.h
index eef7f1a684e..dc1ea3cae46 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_can.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_can.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -68,9 +68,13 @@ typedef enum
HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_RX = 0x22U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_TX_RX = 0x32U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */
HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
}HAL_CAN_StateTypeDef;
@@ -220,17 +224,19 @@ typedef struct
*/
typedef struct
{
- CAN_TypeDef *Instance; /*!< Register base address */
+ CAN_TypeDef *Instance; /*!< Register base address */
- CAN_InitTypeDef Init; /*!< CAN required parameters */
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
- CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
- CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */
- __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+ CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */
- HAL_LockTypeDef Lock; /*!< CAN locking object */
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
__IO uint32_t ErrorCode; /*!< CAN Error code
This parameter can be a value of @ref CAN_Error_Code */
@@ -248,16 +254,19 @@ typedef struct
/** @defgroup CAN_Error_Code CAN Error Code
* @{
*/
-#define HAL_CAN_ERROR_NONE 0x00U /*!< No error */
-#define HAL_CAN_ERROR_EWG 0x01U /*!< EWG error */
-#define HAL_CAN_ERROR_EPV 0x02U /*!< EPV error */
-#define HAL_CAN_ERROR_BOF 0x04U /*!< BOF error */
-#define HAL_CAN_ERROR_STF 0x08U /*!< Stuff error */
-#define HAL_CAN_ERROR_FOR 0x10U /*!< Form error */
-#define HAL_CAN_ERROR_ACK 0x20U /*!< Acknowledgment error */
-#define HAL_CAN_ERROR_BR 0x40U /*!< Bit recessive */
-#define HAL_CAN_ERROR_BD 0x80U /*!< LEC dominant */
-#define HAL_CAN_ERROR_CRC 0x100U /*!< LEC transfer error */
+#define HAL_CAN_ERROR_NONE 0x00000000U /*!< No error */
+#define HAL_CAN_ERROR_EWG 0x00000001U /*!< EWG error */
+#define HAL_CAN_ERROR_EPV 0x00000002U /*!< EPV error */
+#define HAL_CAN_ERROR_BOF 0x00000004U /*!< BOF error */
+#define HAL_CAN_ERROR_STF 0x00000008U /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR 0x00000010U /*!< Form error */
+#define HAL_CAN_ERROR_ACK 0x00000020U /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR 0x00000040U /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD 0x00000080U /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC 0x00000100U /*!< LEC transfer error */
+#define HAL_CAN_ERROR_FOV0 0x00000200U /*!< FIFO0 overrun error */
+#define HAL_CAN_ERROR_FOV1 0x00000400U /*!< FIFO1 overrun error */
+#define HAL_CAN_ERROR_TXFAIL 0x00000800U /*!< Transmit failure */
/**
* @}
*/
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.c
index cdc9743d2ea..9ddc3f2e94f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_cec.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief CEC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the High Definition Multimedia Interface
@@ -49,7 +49,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.h
index 79fee5fe269..34f228fc2e2 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cec.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_cec.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CEC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_conf.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_conf.h
index 41876f14383..ccd4e08cf47 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_conf.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_conf.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_conf.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief HAL configuration file.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.c
index 0c9b5a89656..4c5b78170cc 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_cortex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief CORTEX HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the CORTEX:
@@ -70,7 +70,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.h
index 381b94f8a27..09dc50747dc 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cortex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_cortex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CORTEX HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.c
index bf73da55d47..255f0f56da9 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_crc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief CRC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Cyclic Redundancy Check (CRC) peripheral:
@@ -37,7 +37,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.h
index bc813d4ec22..8390c805461 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_crc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CRC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -281,7 +281,6 @@ typedef struct
* @}
*/
-
/* Include CRC HAL Extension module */
#include "stm32f7xx_hal_crc_ex.h"
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.c
index dad16247400..e959f590054 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_crc_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Extended CRC HAL module driver.
*
* This file provides firmware functions to manage the following
@@ -23,7 +23,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.h
index 2d91fa88ca6..bc285b461e7 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_crc_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_crc_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CRC HAL extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.c
index 024e51b027e..44de3b50e63 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_cryp.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief CRYP HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Cryptography (CRYP) peripheral:
@@ -70,7 +70,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.h
index 6ab89b00224..b5b0e444fb4 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_cryp.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CRYP HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.c
index 2fd0d8e6a36..0df0a67aee8 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_cryp_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Extended CRYP HAL module driver
* This file provides firmware functions to manage the following
* functionalities of CRYP extension peripheral:
@@ -69,7 +69,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.h
index b4e2e16440e..293f01febcb 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_cryp_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_cryp_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of CRYP HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.c
index aa73c6d6474..616203c0bf5 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dac.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief DAC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Digital to Analog Converter (DAC) peripheral:
@@ -143,7 +143,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -440,7 +440,7 @@ HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @param pData: The destination peripheral Buffer address.
+ * @param pData: The Source memory Buffer address.
* @param Length: The length of data to be transferred from memory to DAC peripheral
* @param Alignment: Specifies the data alignment for DAC channel.
* This parameter can be one of the following values:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.h
index c080d6c9eb7..f2cda70f94f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dac.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DAC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.c
index 1edb4c85dfd..6c9cf9ecf73 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dac_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Extended DAC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of DAC extension peripheral:
@@ -25,7 +25,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.h
index 7a72f44816a..1c39f70818d 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dac_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dac.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DAC HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.c
index aef1928bf95..58873b971c8 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dcmi.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief DCMI HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the Digital Camera Interface (DCMI) peripheral:
@@ -63,7 +63,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.h
index 56f5dc35e45..ef68e42bde6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dcmi.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DCMI HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.c
index f75061702f6..af3321de76f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dcmi_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Empty file; This file is no longer used to handle the Black&White
* feature. Its content is now moved to common files
* (stm32f7xx_hal_dcmi.c/.h) as there's no device's dependency within F7
@@ -12,7 +12,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.h
index c43b1887fa3..c1a4bb1f1e2 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dcmi_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dcmi_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DCMI Extension HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_def.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_def.h
index 3afc2682b8c..825d7fd0a15 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_def.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_def.h
@@ -2,14 +2,14 @@
******************************************************************************
* @file stm32f7xx_hal_def.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.c
index 553758ca5e6..13e9f2d6994 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dfsdm.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file provides firmware functions to manage the following
* functionalities of the Digital Filter for Sigma-Delta Modulators
* (DFSDM) peripherals:
@@ -161,7 +161,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.h
index ab120d1db89..58a8a2c3aa2 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dfsdm.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dfsdm.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DFSDM HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.c
index ee8aea7bbbe..1adfab150ce 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dma.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief DMA HAL module driver.
*
* This file provides firmware functions to manage the following
@@ -12,36 +12,36 @@
* + IO operation functions
* + Peripheral State and errors functions
@verbatim
- ==============================================================================
+ ==============================================================================
##### How to use this driver #####
- ==============================================================================
+ ==============================================================================
[..]
(#) Enable and configure the peripheral to be connected to the DMA Stream
(except for internal SRAM/FLASH memories: no initialization is
necessary) please refer to Reference manual for connection between peripherals
- and DMA requests.
-
- (#) For a given Stream, program the required configuration through the following parameters:
+ and DMA requests.
+
+ (#) For a given Stream, program the required configuration through the following parameters:
Transfer Direction, Source and Destination data formats,
Circular, Normal or peripheral flow control mode, Stream Priority level,
Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
-
+
-@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros:
__HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE().
-
+
*** Polling mode IO operation ***
- =================================
- [..]
+ =================================
+ [..]
(+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
address and destination address and the Length of data to be transferred.
(+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
case a fixed Timeout can be configured by User depending from his application.
(+) Use HAL_DMA_Abort() function to abort the current transfer.
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
(+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
(+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
(+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
@@ -50,42 +50,42 @@
(+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
(+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
add his own function by customization of function pointer XferCpltCallback and
- XferErrorCallback (i.e a member of DMA handle structure).
- [..]
+ XferErrorCallback (i.e a member of DMA handle structure).
+ [..]
(#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
detection.
-
+
(#) Use HAL_DMA_Abort_IT() function to abort the current transfer
-
+
-@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
-
+
-@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
Half-Word data size for the peripheral to access its data register and set Word data size
for the Memory to gain in access time. Each two half words will be packed and written in
a single access to a Word in the Memory).
-
+
-@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
and Destination. In this case the Peripheral Data Size will be applied to both Source
- and Destination.
-
+ and Destination.
+
*** DMA HAL driver macros list ***
- =============================================
+ =============================================
[..]
Below the list of most used macros in DMA HAL driver.
(+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
(+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
(+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
-
- [..]
- (@) You can refer to the DMA HAL driver header file for more useful macros
-
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
@endverbatim
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -163,17 +163,17 @@ static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma);
/** @addtogroup DMA_Exported_Functions_Group1
*
-@verbatim
+@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
- ===============================================================================
+ ===============================================================================
[..]
This section provides functions allowing to initialize the DMA Stream source
and destination addresses, incrementation and data sizes, transfer direction,
circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
[..]
The HAL_DMA_Init() function follows the DMA configuration procedures as described in
- reference manual.
+ reference manual.
@endverbatim
* @{
@@ -277,21 +277,26 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
/* Prepare the DMA Stream FIFO configuration */
tmp |= hdma->Init.FIFOMode;
- /* the FIFO threshold is not used when the FIFO mode is disabled */
+ /* The FIFO threshold is not used when the FIFO mode is disabled */
if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
{
/* Get the FIFO threshold */
tmp |= hdma->Init.FIFOThreshold;
- if (DMA_CheckFifoParam(hdma) != HAL_OK)
+ /* Check compatibility between FIFO threshold level and size of the memory burst */
+ /* for INCR4, INCR8, INCR16 bursts */
+ if (hdma->Init.MemBurst != DMA_MBURST_SINGLE)
{
- /* Update error code */
- hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_READY;
-
- return HAL_ERROR;
+ if (DMA_CheckFifoParam(hdma) != HAL_OK)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
}
}
@@ -336,7 +341,7 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
/* Return error status */
return HAL_BUSY;
}
-
+
/* Check the parameters */
assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
@@ -404,7 +409,7 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
/**
* @brief Starts the DMA Transfer.
* @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
+ * the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param DataLength: The length of data to be transferred from source to destination
@@ -426,7 +431,7 @@ HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, ui
hdma->State = HAL_DMA_STATE_BUSY;
/* Initialize the error code */
- hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
/* Configure the source, destination address and the data length */
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
@@ -623,7 +628,7 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level
/* calculate DMA base and stream number */
DMA_Base_Registers *regs;
-
+
if(HAL_DMA_STATE_BUSY != hdma->State)
{
/* No transfer ongoing */
@@ -631,7 +636,7 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level
__HAL_UNLOCK(hdma);
return HAL_ERROR;
}
-
+
/* Polling mode not supported in circular mode and double buffering mode */
if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET)
{
@@ -673,10 +678,10 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level
return HAL_TIMEOUT;
}
}
-
+
/* Get the ISR register value */
tmpisr = regs->ISR;
-
+
if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
{
/* Update error code */
@@ -871,17 +876,17 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
/* Process Unlocked */
__HAL_UNLOCK(hdma);
-
+
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
-
+
if(hdma->XferAbortCallback != NULL)
{
hdma->XferAbortCallback(hdma);
}
return;
}
-
+
if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
{
/* Current memory buffer used is Memory 0 */
@@ -913,11 +918,11 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
/* Process Unlocked */
__HAL_UNLOCK(hdma);
-
+
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
}
-
+
if(hdma->XferCpltCallback != NULL)
{
/* Transfer complete callback */
@@ -933,10 +938,10 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
{
hdma->State = HAL_DMA_STATE_ABORT;
-
+
/* Disable the stream */
__HAL_DMA_DISABLE(hdma);
-
+
do
{
if (++count > timeout)
@@ -952,7 +957,7 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
}
-
+
if(hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
@@ -986,27 +991,27 @@ HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Call
case HAL_DMA_XFER_CPLT_CB_ID:
hdma->XferCpltCallback = pCallback;
break;
-
+
case HAL_DMA_XFER_HALFCPLT_CB_ID:
hdma->XferHalfCpltCallback = pCallback;
break;
-
+
case HAL_DMA_XFER_M1CPLT_CB_ID:
hdma->XferM1CpltCallback = pCallback;
break;
-
+
case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
hdma->XferM1HalfCpltCallback = pCallback;
break;
-
+
case HAL_DMA_XFER_ERROR_CB_ID:
hdma->XferErrorCallback = pCallback;
break;
-
+
case HAL_DMA_XFER_ABORT_CB_ID:
hdma->XferAbortCallback = pCallback;
break;
-
+
default:
break;
}
@@ -1175,7 +1180,7 @@ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t
{
/* Configure DMA Stream source address */
hdma->Instance->PAR = SrcAddress;
-
+
/* Configure DMA Stream destination address */
hdma->Instance->M0AR = DstAddress;
}
@@ -1221,32 +1226,27 @@ static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
uint32_t tmp = hdma->Init.FIFOThreshold;
/* Memory Data size equal to Byte */
- if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
+ if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
{
switch (tmp)
{
- case DMA_FIFO_THRESHOLD_1QUARTERFULL:
- if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
- {
- status = HAL_ERROR;
- }
- break;
- case DMA_FIFO_THRESHOLD_HALFFULL:
- if (hdma->Init.MemBurst == DMA_MBURST_INC16)
- {
- status = HAL_ERROR;
- }
- break;
- case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
- if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
- {
- status = HAL_ERROR;
- }
- break;
- case DMA_FIFO_THRESHOLD_FULL:
- break;
- default:
- break;
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ break;
+ default:
+ break;
}
}
@@ -1255,26 +1255,24 @@ static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
{
switch (tmp)
{
- case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
status = HAL_ERROR;
- break;
- case DMA_FIFO_THRESHOLD_HALFFULL:
- if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
- {
- status = HAL_ERROR;
- }
- break;
- case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
status = HAL_ERROR;
- break;
- case DMA_FIFO_THRESHOLD_FULL:
- if (hdma->Init.MemBurst == DMA_MBURST_INC16)
- {
- status = HAL_ERROR;
- }
- break;
- default:
- break;
+ }
+ break;
+ default:
+ break;
}
}
@@ -1283,19 +1281,19 @@ static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
{
switch (tmp)
{
- case DMA_FIFO_THRESHOLD_1QUARTERFULL:
- case DMA_FIFO_THRESHOLD_HALFFULL:
- case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
status = HAL_ERROR;
- break;
- case DMA_FIFO_THRESHOLD_FULL:
- if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
- {
- status = HAL_ERROR;
- }
- break;
- default:
- break;
+ }
+ break;
+ default:
+ break;
}
}
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.h
index d739e35800f..efd7e6aadb8 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dma.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.c
index 91ea3a1d91e..2ba5010bd6e 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dma2d.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief DMA2D HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the DMA2D peripheral:
@@ -98,7 +98,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.h
index 8d6befe0d45..1965abb99f9 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma2d.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dma2d.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DMA2D HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.c
index 4035d0bc937..b6c7c028940 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dma_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief DMA Extension HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the DMA Extension peripheral:
@@ -27,7 +27,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.h
index cace40a181f..354c9f18942 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dma_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dma_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DMA HAL extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.c
index 5eae306b3e8..9a68b75c3da 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_dsi.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief DSI HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the DSI peripheral:
@@ -14,7 +14,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.h
index 4eaf8ac13a2..3a99c3e5535 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_dsi.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_dsi.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of DSI HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.c
index e24adf81df3..b211bf12d79 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_eth.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief ETH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Ethernet (ETH) peripheral:
@@ -68,7 +68,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.h
index 367cafbbb53..4c0f9bc80ab 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_eth.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_eth.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of ETH HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.c
index 6d2ede12e89..fd65a45cc72 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_flash.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief FLASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the internal FLASH memory:
@@ -72,7 +72,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.h
index 26d03da06ae..e28a9e7a06c 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_flash.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of FLASH HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.c
index 73481562130..ce3c2fe4e44 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_flash_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Extended FLASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the FLASH extension peripheral:
@@ -44,7 +44,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.h
index d28b8880dd7..1f56f6c3ef1 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_flash_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_flash_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of FLASH HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.c
index a9461563f35..46e2ff49568 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_gpio.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief GPIO HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (GPIO) peripheral:
@@ -95,7 +95,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.h
index 39910925e8d..6a0b58e4e3f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_gpio.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of GPIO HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio_ex.h
index c4ad1b89aee..a38db167aa7 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_gpio_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_gpio_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.c
index 1599992c8e2..bdebab80403 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_hash.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief HASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the HASH peripheral:
@@ -68,7 +68,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.h
index 73f1caef585..0619c8d5e43 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_hash.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of HASH HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.c
index 07fc57be1c8..971028ac8b7 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_hash_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief HASH HAL Extension module driver.
* This file provides firmware functions to manage the following
* functionalities of HASH peripheral:
@@ -65,7 +65,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.h
index 96b17c0d2c8..2b8c88772e1 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hash_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_hash_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of HASH HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.c
index 962ee719bf8..4d0f1ce1396 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_hcd.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief HCD HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the USB Peripheral Controller:
@@ -44,7 +44,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.h
index 568bcc259bd..fc109706fc3 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_hcd.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_hcd.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of HCD HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.c
index 708fd8666d8..7a5c4998f31 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_i2c.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief I2C HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Inter Integrated Circuit (I2C) peripheral:
@@ -213,7 +213,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.h
index 11590555fcf..891d0f1b895 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_i2c.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.c
index 9304af4491f..f7283e21159 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_i2c_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief I2C Extended HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of I2C Extended peripheral:
@@ -33,7 +33,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.h
index c34cfb37443..326bec93c84 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2c_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_i2c_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of I2C HAL Extended module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.c
index c10bae51d61..7cc338c187d 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_i2s.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief I2S HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Integrated Interchip Sound (I2S) peripheral:
@@ -109,7 +109,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.h
index 4b75336c8b4..f782ea32efa 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_i2s.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_i2s.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of I2S HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.c
index 14e14b57b19..6e392223ed3 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_irda.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief IRDA HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the IrDA (Infrared Data Association) Peripheral
@@ -106,7 +106,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.h
index a094e5ae5a5..2b280f36c1b 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_irda.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of IRDA HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda_ex.h
index 82912d8fff0..2bc17300a23 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_irda_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_irda_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of IRDA HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.c
index 262171d7f27..37824305113 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_iwdg.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief IWDG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Independent Watchdog (IWDG) peripheral:
@@ -81,7 +81,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.h
index e67825e3d13..50f28792814 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_iwdg.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_iwdg.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of IWDG HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.c
index 828305c1188..07c45c8ae1c 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_jpeg.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief JPEG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the JPEG encoder/decoder peripheral:
@@ -151,7 +151,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.h
index 42aafe2db43..c8aefe5b66f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_jpeg.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_jpeg.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of JPEG HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.c
index 1355bff1fed..a173d82d069 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_lptim.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief LPTIM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Low Power Timer (LPTIM) peripheral:
@@ -93,7 +93,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.h
index b9ebfa1619c..151e77fb4d3 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_lptim.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_lptim.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of LPTIM HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.c
index 03cc1c61b7e..e099dc1b1e9 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_ltdc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief LTDC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the LTDC peripheral:
@@ -82,7 +82,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.h
index f10427093d3..820e78720ad 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_ltdc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of LTDC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.c
index 9b7d3f2b3f8..c70cd0c9ca0 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.c
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_ltdc_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief LTDC Extension HAL module driver.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.h
index 49e0f1a88e2..4972f26a5af 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_ltdc_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_ltdc_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of LTDC HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.c
index b16c323e2f1..33a2991817e 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_mdios.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief MDIOS HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the MDIOS Peripheral.
@@ -65,7 +65,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.h
index d27eb2fc8df..a74ab443d36 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_mdios.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_mdios.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of MDIOS HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.c
index 290d7875a6d..29df0894bf6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_nand.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief NAND HAL module driver.
* This file provides a generic firmware to drive NAND memories mounted
* as external device.
@@ -58,7 +58,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -427,7 +427,7 @@ HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceC
hnand->Config.BlockSize = pDeviceConfig->BlockSize;
hnand->Config.BlockNbr = pDeviceConfig->BlockNbr;
hnand->Config.PlaneSize = pDeviceConfig->PlaneSize;
- hnand->Config.PlaneNbr = pDeviceConfig->BlockNbr;
+ hnand->Config.PlaneNbr = pDeviceConfig->PlaneNbr;
hnand->Config.ExtraCommandEnable = pDeviceConfig->ExtraCommandEnable;
return HAL_OK;
@@ -1663,7 +1663,7 @@ uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pA
pAddress->Block = 0;
pAddress->Plane++;
- if(pAddress->Plane == (hnand->Config.PlaneSize/ hnand->Config.BlockNbr))
+ if(pAddress->Plane == (hnand->Config.PlaneNbr))
{
status = NAND_INVALID_ADDRESS;
}
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.h
index 9f6dee1e528..4b11c427e7a 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nand.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_nand.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of NAND HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.c
index a41a6d8ccd5..89433adbe62 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_nor.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief NOR HAL module driver.
* This file provides a generic firmware to drive NOR memories mounted
* as external device.
@@ -55,7 +55,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.h
index 6b2ccdde3e0..e19dc3825f0 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_nor.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_nor.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of NOR HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c
index b7037e01743..67a711708dc 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_pcd.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief PCD HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the USB Peripheral Controller:
@@ -45,7 +45,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.h
index 403b05823b6..3beeefa1ef6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.c
index 0be628fe8f5..48b6997067a 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_pcd_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief PCD HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the USB Peripheral Controller:
@@ -12,7 +12,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.h
index 959f448471f..91a18dcd8f9 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_pcd_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.c
index c87d2b4d2cd..8ca742e513e 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_pwr.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief PWR HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Power Controller (PWR) peripheral:
@@ -13,7 +13,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.h
index 62749ad3624..2633f009441 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_pwr.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.c
index 4e0b6a2d3e1..4b3276f556f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_pwr_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Extended PWR HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of PWR extension peripheral:
@@ -12,7 +12,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.h
index d32b7e5c5b3..2b36ef5c460 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pwr_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_pwr_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.c
index 82309e038b3..de5fb4408fd 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_qspi.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief QSPI HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the QuadSPI interface (QSPI).
@@ -138,7 +138,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.h
index 4bd99b83ca4..38c6fc7a556 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_qspi.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_qspi.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of QSPI HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.c
index 7cb6f6a5f2e..a161b2664f6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_rcc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief RCC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Reset and Clock Control (RCC) peripheral:
@@ -56,7 +56,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.h
index 3c91ad01291..af318d10bd7 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.c
index 4d864618165..9a4139947ef 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_rcc_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Extension RCC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities RCC extension peripheral:
@@ -12,7 +12,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.h
index 028ca0f9ef9..4532820b757 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rcc_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_rcc_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of RCC HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.c
index 5ff07844d18..fd6033c4a1f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_rng.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief RNG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Random Number Generator (RNG) peripheral:
@@ -29,7 +29,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.h
index 2ac29c8b4e8..d9863de94ed 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rng.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_rng.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of RNG HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.c
index 0836f48790f..04aa1e17dce 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_rtc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief RTC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Real Time Clock (RTC) peripheral:
@@ -109,7 +109,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.h
index 1c3c4ebae62..babfab8c0e5 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_rtc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of RTC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.c
index 65e5722c214..323c8aae5f8 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_rtc_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief RTC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Real Time Clock (RTC) Extension peripheral:
@@ -70,7 +70,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.h
index fba590f9bbb..47d338fad34 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_rtc_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_rtc_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.c
index 53aef1fa3e2..c124380bc3e 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_sai.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SAI HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Serial Audio Interface (SAI) peripheral:
@@ -136,7 +136,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.h
index 74171e1cea0..09c32bee765 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_sai.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SAI HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.c
index 8b61b43e96f..8d2bc94d813 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_sai_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Empty file; This file is no longer used to set synchronization and
* to get SAI block frequency. Its content is now moved to common files
* (stm32f7xx_hal_sai.c/.h) as there's no device's dependency within F7
@@ -12,7 +12,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.h
index 92456e8e6fd..54774256ef4 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sai_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_sai_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SAI Extension HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.c
index 6cf7661c4a7..5b353e1035c 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_sd.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SD card HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Secure Digital (SD) peripheral:
@@ -198,7 +198,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -374,6 +374,9 @@ HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd)
/* Enable SDMMC Clock */
__HAL_SD_ENABLE(hsd);
+ /* Required power up waiting time before starting the SD initialization sequence */
+ HAL_Delay(2);
+
/* Identify card operating voltage */
errorstate = SD_PowerON(hsd);
if(errorstate != HAL_SD_ERROR_NONE)
@@ -2222,35 +2225,38 @@ static void SD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
}
/**
- * @brief DMA SD communication error callback
- * @param hdma: DMA handle
- * @retval None
- */
+* @brief DMA SD communication error callback
+* @param hdma: DMA handle
+* @retval None
+*/
static void SD_DMAError(DMA_HandleTypeDef *hdma)
{
SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent);
HAL_SD_CardStateTypeDef CardState;
- if((hsd->hdmarx->ErrorCode == HAL_DMA_ERROR_TE) || (hsd->hdmatx->ErrorCode == HAL_DMA_ERROR_TE))
+ /* if DMA error is FIFO error ignore it */
+ if(HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE)
{
- /* Clear All flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
-
- /* Disable All interrupts */
- __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT|\
- SDMMC_IT_TXUNDERR| SDMMC_IT_RXOVERR);
-
- hsd->ErrorCode |= HAL_SD_ERROR_DMA;
- CardState = HAL_SD_GetCardState(hsd);
- if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ if((hsd->hdmarx->ErrorCode == HAL_DMA_ERROR_TE) || (hsd->hdmatx->ErrorCode == HAL_DMA_ERROR_TE))
{
- hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance);
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+
+ /* Disable All interrupts */
+ __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT|\
+ SDMMC_IT_TXUNDERR| SDMMC_IT_RXOVERR);
+
+ hsd->ErrorCode |= HAL_SD_ERROR_DMA;
+ CardState = HAL_SD_GetCardState(hsd);
+ if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ {
+ hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance);
+ }
+
+ hsd->State= HAL_SD_STATE_READY;
}
-
- hsd->State= HAL_SD_STATE_READY;
+ HAL_SD_ErrorCallback(hsd);
}
-
- HAL_SD_ErrorCallback(hsd);
}
/**
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.h
index fc21d5334f4..b6be1a394f0 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sd.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_sd.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SD HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.c
index 8f182b552bf..55181aae776 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_sdram.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SDRAM HAL module driver.
* This file provides a generic firmware to drive SDRAM memories mounted
* as external device.
@@ -63,7 +63,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.h
index 42c2265c76c..6d94d06f464 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sdram.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_sdram.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SDRAM HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.c
index 99d293adc3e..39aa9451218 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_smartcard.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SMARTCARD HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the SMARTCARD peripheral:
@@ -108,7 +108,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.h
index 802c7911e24..9c64efac70c 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_smartcard.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.c
index 5ac86deb030..b2eca69765e 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_smartcard_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SMARTCARD HAL module driver.
*
* This file provides extended firmware functions to manage the following
@@ -25,7 +25,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.h
index f7e4105935e..1c3ea506121 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_smartcard_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_smartcard_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.c
index 0aa95e3431d..fa023f1f27f 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_spdifrx.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief This file provides firmware functions to manage the following
* functionalities of the SPDIFRX audio interface:
* + Initialization and Configuration
@@ -94,7 +94,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.h
index 1fedfe77231..72bc3157a82 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spdifrx.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_spdifrx.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SPDIFRX HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.c
index eb1b753c21b..18a6ce9d727 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_spi.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SPI HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Serial Peripheral Interface (SPI) peripheral:
@@ -120,7 +120,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.h
index c8b33bf6a8e..efe31c67824 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_spi.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_spi.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.c
index a8ade6bc293..70055fd9a28 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_sram.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SRAM HAL module driver.
* This file provides a generic firmware to drive SRAM memories
* mounted as external device.
@@ -64,7 +64,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.h
index 644c3409984..6aeafb28c8e 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_sram.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_sram.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SRAM HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.c
index 1af358829ef..b8b61ea3411 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_tim.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief TIM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Timer (TIM) peripheral:
@@ -98,7 +98,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.h
index 161ea1a57a6..467bc13d5f6 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_tim.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of TIM HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.c
index 04b7b883d53..0250d25b03a 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_tim_ex.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief TIM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Timer extension peripheral:
@@ -72,7 +72,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.h
index fa4d11c7958..396cae828c8 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_tim_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_tim_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of TIM HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.c
index b54ce5dc466..4d9e3184534 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_uart.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief UART HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
@@ -126,7 +126,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.h
index b4628277327..154343099b4 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_uart.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart_ex.h
index b864b1d28ad..74c1799736a 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_uart_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.c
index 64c6f2707d5..6af06ca1137 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_usart.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief USART HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter
@@ -52,7 +52,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.h
index 2e97df3e7cf..4885867ebd5 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_usart.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of USART HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart_ex.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart_ex.h
index 3b5b057336e..8dccebea645 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart_ex.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_usart_ex.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_usart_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of USART HAL Extension module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.c
index 36c292c93fb..2ec5d77a417 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_wwdg.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief WWDG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Window Watchdog (WWDG) peripheral:
@@ -96,7 +96,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.h
index 3a546a062c8..8a1569b5f36 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_wwdg.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_hal_wwdg.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of WWDG HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.c
index 446e58121af..381c408354a 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_ll_fmc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief FMC Low Layer HAL module driver.
*
* This file provides firmware functions to manage the following
@@ -46,7 +46,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.h
index ab781fc7a4e..dd409acaac4 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_fmc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_ll_fmc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of FMC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.c
index c53b2d2796f..10860289a64 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_ll_sdmmc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief SDMMC Low Layer HAL module driver.
*
* This file provides firmware functions to manage the following
@@ -147,7 +147,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -328,10 +328,6 @@ HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx)
/* Set power state to ON */
SDMMCx->POWER = SDMMC_POWER_PWRCTRL;
- /* 1ms: required power up waiting time before starting the SD initialization
- sequence */
- HAL_Delay(1);
-
return HAL_OK;
}
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.h
index 8d413560758..81fbb0d9680 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_sdmmc.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_ll_sdmmc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of SDMMC HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -316,7 +316,7 @@ typedef struct
#define SDMMC_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U)
#define SDMMC_CARD_LOCKED ((uint32_t)0x02000000U)
-#define SDMMC_DATATIMEOUT ((uint32_t)0x00100000U)
+#define SDMMC_DATATIMEOUT ((uint32_t)0xFFFFFFFFU)
#define SDMMC_0TO7BITS ((uint32_t)0x000000FFU)
#define SDMMC_8TO15BITS ((uint32_t)0x0000FF00U)
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.c b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.c
index 5bf9e8f0fb6..b9df20e88e0 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.c
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.c
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_ll_usb.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief USB Low Layer HAL module driver.
*
* This file provides firmware functions to manage the following
@@ -28,7 +28,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
diff --git a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.h b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.h
index cabc9d7250b..90c7debd341 100644
--- a/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.h
+++ b/targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_ll_usb.h
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f7xx_ll_usb.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 30-December-2016
+ * @version V1.2.2
+ * @date 14-April-2017
* @brief Header file of USB Core HAL module.
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2016 STMicroelectronics
+ * © COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
|
