- Use the network and virtual machines from the previous labs.
- Install or customize a DHCP server for running the bootloader over the network?
- Install or customize a TFTP server for running the bootloader over the network?
- Prepare the bootloader with the associated files in the folder served by the TFTP server.
- Start the client virtual machine in network boot mode and have it acquire and run the bootloader over the network.
Booting a Linux operating system has the following steps:
- When you press the computer's start button, the processor starts executing code at a predetermined address, for example
0xFFFFFFF0on 32-bit and 64-bit x86 processors. - It starts executing commands stored in the Basic Input Output System (BIOS) system located on a separate memory (Read Only Memory - ROM) on the motherboard that detects and controls the hardware and hands over execution to the bootloader. A Power-On Self-Test (POST) process is performed that detects and checks hardware such as processor, memory, graphics card, hard disks and other input/output devices.
- Next, BIOS Extensions are run, which enables the execution of commands stored in the BIOS flash of expansion cards for their startup, for example network cards, disk controllers, graphics accelerators and other devices.
- The BIOS reads the first 512B of the selected data volume available and starts them, it also provides the mentioned program with the possibility to access further data on the device. These first 512B on the volume are called Master Boot Record (MBR), which contains the bootloader in the first 446B, then the partition table in the next 64B and the signature in the last 2B . The MBR can be located on a hard drive, USB flash drive, CD or DVD.
- Bootloader in the MBR takes care of starting the operating system. Since the system loader for a modern operating system needs more space than 446B, we split it into two parts. Stage 1 bootloader resides in the MBR and provides booting for stage 2 bootloader, which resides in one of the partitions on the data volume.
- The 2 stage bootloader takes care of starting the operating system by starting the kernel with additional parameters and the initial virtual disk (initial RAM disk - initrd or initramfs) with a temporary initial file system.
- Then the first program (init) is run on the operating system that takes care of booting and gets the process ID of 1.
- Now the user programs, graphic environment and other programs are able to start.
Common bootloaders:
The mount command allows us to mount a file system on a volume so that it can be accessed by our operating system.
We start the first virtual computer and check the status of both configured network cards with the ip command.
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever
inet6 ::1/128 scope host valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 08:00:27:26:d5:82 brd ff:ff:ff:ff:ff:ff
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 08:00:27:86:d1:5b brd ff:ff:ff:ff:ff:ff
inet6 fe80::a00:27ff:fe86:d15b/64 scope link noprefixroute valid_lft forever preferred_lft forever
We get the following printout, from which we determine that both network cards did not obtain IP network addresses, which is the result of missing settings and the operation of the network-manager program, which manages networks. To continue setting up the network, we will turn off the network-manager and prepare the necessary configuration files to achieve the desired operation.
su -
systemctl stop NetworkManager.service
systemctl disable NetworkManager.service
We setup the network cards in the file /etc/network/interfaces in such a way that enp0s3 represents the network card in the NAT network, which obtains the network address automatically via DHCP, and enp0s8 represents the network card in the Internal network network, which has a static address because the DHCP server will work through it.
nano /etc/network/interfaces
auto enp0s3
iface enp0s3 inet dhcp
auto enp0s8
iface enp0s8 inet static
address 10.0.0.1
netmask 255.255.255.0
In order for the settings to be taken into account, we restart the operation of the network cards on the virtual computer.
systemctl restart networking.service
Now install a DHCP server, for example isc-dhcp-server.
apt update
apt install isc-dhcp-server
In the /etc/default/isc-dhcp-server file, set the network card on which the isc-dhcp-server DHCP server should run.
nano /etc/default/isc-dhcp-server
INTERFACESv4="enp0s8"
In the /etc/dhcp/dhcpd.conf file, we set which network will be managed by the DHCP server, i.e. which IP network addresses will it assign to network devices, the IP address of the main gateway, the DNS server IP address (for example, the public Cloudflare DNS server with the IP address 1.1.1.1), we set the name of the bootloader that we will offer over the network in the environment Preboot Execution Environment (PXE) and the server IP address that provides it.
nano /etc/dhcp/dhcpd.conf
subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.100 10.0.0.200;
option routers 10.0.0.1;
option domain-name-servers 1.1.1.1;
filename "pxelinux.0";
next-server 10.0.0.1;
}
Next, we enable routing in the /etc/sysctl.conf file.
nano /etc/sysctl.conf
net.ipv4.ip_forward=1
To take into account the changes in Linux kernel parameters, use the sysctl command.
sysctl -p
Then we set the IP network address translation. If we do not already have the iptables package installed, we install it with the package manager of the operating system.
apt install iptables
iptables -t nat -A POSTROUTING -o enp0s3 -j MASQUERADE
Let's make sure that the rules we enter in iptables are preserved by installing iptables-persistent and saving them.
apt install iptables-persistent
For the settings to take effect, restart the isc-dhcp-server DHCP server.
systemctl restart isc-dhcp-server.service
Let's install a TFTP server, for example tftpd.
apt install tftpd
The installed tftpd server is already running with the default settings specified in the configuration file /etc/inetd.conf.
nano /etc/inetd.conf
tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd /srv/tftp
Let's create a /srv/tftp folder, which TFTP will offer over the network.
mkdir /srv/tftp
If you cannot find the tftpd package with the package manager, then install the tftpd-hpa package and add the -v flag and the -c flag in the /etc/default/tftpd-hpa configuration file to enable automatic availability of newly added files in the /srv/tftp and enable more verbose logging.
apt install tftpd-hpa
nano /etc/default/tftpd-hpa
# /etc/default/tftpd-hpa
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/srv/tftp"
TFTP_ADDRESS=":69"
TFTP_OPTIONS="-v -c --secure"
It we need a system bootloader that allows booting over the network. For example, let's use pxelinux by first obtaining it with a package manager and then moving it to /srv/tftp to make it accessible via TFTP on the network.
apt install pxelinux
cd /srv/tftp
cp /usr/lib/PXELINUX/pxelinux.0 .
We set the second virtual computer to boot over the network by clicking on the Settings... button in the menu above and under the tab System\Motherboard and the label Start order: select Network and uncheck all other options.
We now start the second virtual computer and it starts the PXE environment for booting over the network. The virtual machine successfully obtains an IP address from our DHCP server, receives the IP address of the TFTP server, and the name of the bootloader it needs to download. It then successfully downloads the pxelinux.0 bootloader and runs it. The bootloader stops at the missing ldlinux.c32 file.
Communication between the server and the client can also be tracked with logs in /var/log/syslog that are updated automatically. First we see obtaining an IP address via the DHCP server, then via the TFTP protocol the download of the system loader pxelinux.0 and then the search for the file ldlinux.c32 in various places in the file system. Because the ldlinux.c32 file does not exist, the network boot process fails.
tail -f /var/log/syslog
Nov 3 15:27:06 debian dhcpd[679]: DHCPDISCOVER from 08:00:27:4f:53:22 via enp0s8
Nov 3 15:27:07 debian dhcpd[679]: DHCPOFFER on 10.0.0.100 to 08:00:27:4f:53:22 via enp0s8
Nov 3 15:27:09 debian dhcpd[679]: reuse_lease: lease age 82 (secs) under 25% threshold, reply with unaltered, existing lease for 10.0.0.100
Nov 3 15:27:09 debian dhcpd[679]: DHCPREQUEST for 10.0.0.100 (10.0.0.1) from 08:00:27:4f:53:22 via enp0s8
Nov 3 15:27:09 debian dhcpd[679]: DHCPACK on 10.0.0.100 to 08:00:27:4f:53:22 via enp0s8
Nov 3 15:27:09 debian in.tftpd[3304]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3305]: tftpd: trying to get file: pxelinux.0
Nov 3 15:27:09 debian tftpd[3305]: tftpd: serving file from /srv/tftp
Nov 3 15:27:09 debian in.tftpd[3306]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3307]: tftpd: trying to get file: ldlinux.c32
Nov 3 15:27:09 debian tftpd[3307]: tftpd: serving file from /srv/tftp
Nov 3 15:27:09 debian in.tftpd[3308]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3309]: tftpd: trying to get file: /boot/isolinux/ldlinux.c32
Nov 3 15:27:09 debian in.tftpd[3310]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3311]: tftpd: trying to get file: /isolinux/ldlinux.c32
Nov 3 15:27:09 debian in.tftpd[3312]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3313]: tftpd: trying to get file: /boot/syslinux/ldlinux.c32
Nov 3 15:27:09 debian in.tftpd[3314]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3315]: tftpd: trying to get file: /syslinux/ldlinux.c32
Nov 3 15:27:09 debian in.tftpd[3316]: connect from 10.0.0.100 (10.0.0.100)
Nov 3 15:27:09 debian tftpd[3317]: tftpd: trying to get file: /ldlinux.c32
In newer versions of the Linux operating system, events are recorded in 'systemd' logs, which are accessed via the journalctl command. The -u flag enables following of the events of only a particular program, and the -f flag allows us to automatically display new records.
journalctl -u tftpd-hpa.service -f
Oct 31 19:18:18 debian systemd[1]: Starting tftpd-hpa.service - LSB: HPA's tftp server...
Oct 31 19:18:18 debian tftpd-hpa[786]: Starting HPA's tftpd: in.tftpd.
Oct 31 19:18:18 debian systemd[1]: Started tftpd-hpa.service - LSB: HPA's tftp server.
Oct 31 19:34:02 debian in.tftpd[2776]: RRQ from 10.0.1.100 filename pxelinux.0
Oct 31 19:34:02 debian in.tftpd[2777]: RRQ from 10.0.1.100 filename ldlinux.c32
Oct 31 19:34:02 debian in.tftpd[2777]: sending NAK (1, File not found) to 10.0.1.100
Oct 31 19:34:02 debian in.tftpd[2778]: RRQ from 10.0.1.100 filename /boot/isolinux/ldlinux.c32
Oct 31 19:34:02 debian in.tftpd[2778]: sending NAK (1, File not found) to 10.0.1.100
Oct 31 19:34:02 debian in.tftpd[2779]: RRQ from 10.0.1.100 filename /isolinux/ldlinux.c32
Oct 31 19:34:02 debian in.tftpd[2779]: sending NAK (1, File not found) to 10.0.1.100
Oct 31 19:34:02 debian in.tftpd[2780]: RRQ from 10.0.1.100 filename /boot/syslinux/ldlinux.c32
Oct 31 19:34:02 debian in.tftpd[2780]: sending NAK (1, File not found) to 10.0.1.100
Oct 31 19:34:02 debian in.tftpd[2781]: RRQ from 10.0.1.100 filename /syslinux/ldlinux.c32
Oct 31 19:34:02 debian in.tftpd[2781]: sending NAK (1, File not found) to 10.0.1.100
Oct 31 19:34:02 debian in.tftpd[2782]: RRQ from 10.0.1.100 filename /ldlinux.c32
Oct 31 19:34:02 debian in.tftpd[2782]: sending NAK (1, File not found) to 10.0.1.100
The missing file is part of the modules needed to run the bootloader, which also needs a configuration file. The easiest way to get to the files is to take the installation image of a Linux distribution that uses the isolinux bootloader and copy them to the /srv/tftp folder. Later, we will use the rest of the files to successfully boot the operating system. For example, we download the installation image of the distribution Mint and insert it into the first virtual machine by selecting it in the menu Devices\Optical drives\Select disk file .... The image is now inserted and we access it via /dev/sr0, to access the files, we still have to mount it with the mount command in any empty folder.
mount /dev/sr0 /mnt
Download the missing files from the isolinux folder on the attached installation image.
cp /mnt/isolinux/ldlinux.c32 .
cp /mnt/isolinux/libutil.c32 .
cp /mnt/isolinux/vesamenu.c32 .
cp /mnt/isolinux/libcom32.c32 .
cp /mnt/isolinux/splash.png .
cp /mnt/isolinux/live.cfg .
We still lack the system loader configuration file, for which we can use the isolinux.cfg and live.cfg files from the installation image. The pxelinux system loader can offer several configuration files at the same time, which are stored in the pxelinux.cfg folder and we transfer isolinux.cfg to it and rename it to default.
mkdir pxelinux.cfg
cp /mnt/isolinux/isolinux.cfg ./pxelinux.cfg/default
Now we restart the second virtual machine which successfully starts the bootloader with the given settings.
