ANAVI Miracle Controller
ANAVI Miracle Controller is an open source hardware development board for controlling 2 12V or 5V addressable LED strips. It features:
- ESP8266 WiFi microcontroller
- Terminals for 2 12V or 5V addressable LED strips (WS2811, WS2812, TM1804, etc.)
- Jumper to select 12V or 5V power input
- Dedicated slot for I2C OLED display
- Slots for up to 3 plug and play I2C sensors for temperature, barometric pressure, humidity and light
- UART (Universal asynchronous receiver/transmitter) pins for debugging
Open source software for ANAVI Miracle Controller written as an Arduino sketch is also available at GitHub.
The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).
Note: This is a human-readable summary of (and not a substitute for) the license.
You are free to:
Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.
Credit can be attributed through a link to the creator website: http://www.anavi.technology