; ### Klipper Pressure Advance Calibration Pattern ###
;
; Original Marlin linear advance calibration tool by Sineos [https://github.com/Sineos]
; Heavily modified/rewritten by Andrew Ellis [https://github.com/AndrewEllis93]
;
; -------------------------------------------
; Generated: Wed Nov 23 2022 21:36:40 GMT-0600 (Central Standard Time)
; -------------------------------------------
;
; Printer:
;  - Firmware: klipper
;  - Bed Shape: Rect
;  - Bed Size X: 230 mm
;  - Bed Size Y: 230 mm
;  - Origin Bed Center: false
;  - Extruder Name: 
;  - Travel Speed: 120 mm/s
;  - Nozzle Diameter: 0.4 mm
;
; Start / End G-code:
;  - Start G-code Type: custom
;  - Hotend Temp: 215C
;  - Bed Temp: 60C
;
; Filament / Flow:
;  - Filament Diameter: 1.75 mm
;  - Extrusion Multiplier: 0.95
;  - Line Width: 110 %
;
; Retraction / Z Hop:
;  - Retraction Distance: 0.5 mm
;  - Retract Speed: 35 mm/s
;  - Unretract Speed: 35 mm/s
;  - Z Hop Enable: true
;  - Z Hop Height: 0.2mm 
;
; First Layer Settings:
;  - First Layer Height: 0.25 mm
;  - First Layer Printing Speed: 1800 mm/s
;  - First Layer Fan: 0%
;  - Anchor Option: anchor_frame
;  - Anchor Frame Perimeters: 4
;  - Anchor Line Width: 140 %
;
; Print Settings:
;  - Layer Height: 0.2 mm
;  - Print Speed: 7200 mm/s
;  - Acceleration: 4000 mm/s^2
;  - Fan Speed: 50%
;
; Pattern Settings (Using defaults):
;  - Print Height: 1 mm
;  - Perimeter Count: 3
;  - Side Length: 30 mm
;  - Spacing: 3 mm
;  - Corner Angle: 90 degrees 
;  - Printing Direction: 0 degree
;
; Pressure Advance Stepping:
;  - PA Start Value: 0
;  - PA End Value: 0.08
;  - PA Increment: 0.005
;  - Show on LCD: true
;
; Calculated Values:
;  - Number of Patterns to Print: 17
;  - PA Values: 0, 0.005, 0.01, 0.015, 0.02, 0.025, 0.03, 0.035, 0.04, 0.045, 0.05, 0.055, 0.06, 0.065, 0.07, 0.075, 0.08
;  - Print Size X: 96.9 mm
;  - Print Size Y: 42.43 mm
;  - Total Number of Layers: 5
;
; Prepare printing
; 
M190 S60          ; set & wait for bed temp
M109 S215       ; set & wait for hotend temp 
G28                      ; Home all
BED_MESH_PROFILE LOAD=floor_is_lava

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
G21 ; Millimeter units
G90 ; Absolute XYZ
M83 ; Relative E
G92 E0 ; Reset extruder distance
;
;  Begin printing
;
M106 S0 ; Set fan speed
SET_VELOCITY_LIMIT ACCEL=4000 ; Set printing acceleration
G0 X66.5513 Y93.7868 F7200 ; Move to start position
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 Z0.25 F7200 ; Move to z height
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance
M117 PA0
G1 X66.5513 Y136.2132 E2.34597 F1800 ; Draw anchor perimeter (up)
G1 X163.4487 Y136.2132 E5.35794 F1800 ; Draw anchor perimeter (right)
G1 X163.4487 Y93.7868 E2.34597 F1800 ; Draw anchor perimeter (down)
G1 X66.5513 Y93.7868 E5.35794 F1800 ; Draw anchor perimeter (left)
G0 X67.0684 Y94.3039 F7200 ; Step inwards to print next anchor perimeter
G1 X67.0684 Y135.6961 E2.28878 F1800 ; Draw anchor perimeter (up)
G1 X162.9316 Y135.6961 E5.30075 F1800 ; Draw anchor perimeter (right)
G1 X162.9316 Y94.3039 E2.28878 F1800 ; Draw anchor perimeter (down)
G1 X67.0684 Y94.3039 E5.30075 F1800 ; Draw anchor perimeter (left)
G0 X67.5855 Y94.821 F7200 ; Step inwards to print next anchor perimeter
G1 X67.5855 Y135.179 E2.2316 F1800 ; Draw anchor perimeter (up)
G1 X162.4145 Y135.179 E5.24357 F1800 ; Draw anchor perimeter (right)
G1 X162.4145 Y94.821 E2.2316 F1800 ; Draw anchor perimeter (down)
G1 X67.5855 Y94.821 E5.24357 F1800 ; Draw anchor perimeter (left)
G0 X68.1026 Y95.338 F7200 ; Step inwards to print next anchor perimeter
G1 X68.1026 Y134.662 E2.17442 F1800 ; Draw anchor perimeter (up)
G1 X161.8974 Y134.662 E5.18638 F1800 ; Draw anchor perimeter (right)
G1 X161.8974 Y95.338 E2.17442 F1800 ; Draw anchor perimeter (down)
G1 X68.1026 Y95.338 E5.18638 F1800 ; Draw anchor perimeter (left)
G0 X68.1026 Y95.338 F7200 ; Move to start
G1 Z0.25 F7200 ; Move to z height
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance
M117 PA0
G1 X87.7645 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X68.1026 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X68.6641 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.3261 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X68.6641 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X69.2257 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.8876 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X69.2257 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X72.6657 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.005 ; Set pressure advance
M117 PA0.005
G1 X92.3276 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X72.6657 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X73.2272 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X92.8892 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X73.2272 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X73.7888 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X93.4508 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X73.7888 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X77.2288 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.01 ; Set pressure advance
M117 PA0.01
G1 X96.8908 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X77.2288 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X77.7903 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X97.4523 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X77.7903 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X78.3519 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X98.0139 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X78.3519 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X81.7919 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.015 ; Set pressure advance
M117 PA0.015
G1 X101.4539 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X81.7919 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X82.3535 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.0154 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X82.3535 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X82.915 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.577 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X82.915 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X86.355 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.02 ; Set pressure advance
M117 PA0.02
G1 X106.017 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X86.355 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X86.9166 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X106.5785 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X86.9166 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X87.4781 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X107.1401 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X87.4781 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X90.9181 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.025 ; Set pressure advance
M117 PA0.025
G1 X110.5801 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X90.9181 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X91.4797 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.1416 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X91.4797 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X92.0412 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.7032 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X92.0412 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X95.4812 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.03 ; Set pressure advance
M117 PA0.03
G1 X115.1432 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X95.4812 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X96.0428 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X115.7048 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X96.0428 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X96.6043 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X116.2663 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X96.6043 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X100.0443 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.035 ; Set pressure advance
M117 PA0.035
G1 X119.7063 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X100.0443 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X100.6059 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.2679 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X100.6059 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X101.1675 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.8294 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X101.1675 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X104.6075 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.04 ; Set pressure advance
M117 PA0.04
G1 X124.2694 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X104.6075 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X105.169 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X124.831 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X105.169 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X105.7306 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X125.3925 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X105.7306 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X109.1706 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.045 ; Set pressure advance
M117 PA0.045
G1 X128.8325 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X109.1706 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X109.7321 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.3941 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X109.7321 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X110.2937 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.9556 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X110.2937 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X113.7337 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.05 ; Set pressure advance
M117 PA0.05
G1 X133.3956 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X113.7337 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X114.2952 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X133.9572 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X114.2952 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X114.8568 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X134.5188 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X114.8568 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X118.2968 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.055 ; Set pressure advance
M117 PA0.055
G1 X137.9588 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X118.2968 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X118.8583 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X138.5203 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X118.8583 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X119.4199 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X139.0819 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X119.4199 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X122.8599 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.06 ; Set pressure advance
M117 PA0.06
G1 X142.5219 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X122.8599 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X123.4215 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.0834 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X123.4215 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X123.983 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.645 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X123.983 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X127.423 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.065 ; Set pressure advance
M117 PA0.065
G1 X147.085 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X127.423 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X127.9846 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X147.6465 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X127.9846 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X128.5461 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X148.2081 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X128.5461 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X131.9861 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.07 ; Set pressure advance
M117 PA0.07
G1 X151.6481 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X131.9861 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X132.5477 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.2096 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X132.5477 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X133.1092 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.7712 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X133.1092 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X136.5492 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.075 ; Set pressure advance
M117 PA0.075
G1 X156.2112 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X136.5492 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X137.1108 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X156.7728 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X137.1108 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X137.6723 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X157.3343 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X137.6723 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X141.1123 Y95.338 F7200 ; Move to next pattern
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.08 ; Set pressure advance
M117 PA0.08
G1 X160.7743 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X141.1123 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X141.6739 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.3359 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X141.6739 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X142.2355 Y95.338 F7200 ; Move to start next pattern perimeter
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.8974 Y115 E0.96646 F1800 ; Print pattern perimeter
G1 X142.2355 Y134.662 E0.96646 F1800 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X68.1026 Y95.338 F7200 ; Move back to start position
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
M106 S0 ; Set fan speed
G1 E-0.5 F2100 ; Retract
G1 Z0.45 F7200 ; Z hop
G0 X66.5513 Y93.7868 F7200 ; Move to start
G1 Z0.25 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 Z0.45 F7200 ; Move to z height
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance
M117 PA0
G1 X87.7645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X66.5513 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X67.1129 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.3261 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.1129 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X67.6744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.8876 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.6744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X71.1144 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.005 ; Set pressure advance
M117 PA0.005
G1 X92.3276 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.1144 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X71.676 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X92.8892 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.676 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X72.2376 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X93.4508 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X72.2376 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X75.6776 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.01 ; Set pressure advance
M117 PA0.01
G1 X96.8908 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X75.6776 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X76.2391 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X97.4523 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.2391 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X76.8007 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X98.0139 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.8007 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X80.2407 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.015 ; Set pressure advance
M117 PA0.015
G1 X101.4539 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.2407 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X80.8022 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.0154 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.8022 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X81.3638 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.577 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X81.3638 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X84.8038 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.02 ; Set pressure advance
M117 PA0.02
G1 X106.017 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X84.8038 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X85.3653 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X106.5785 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.3653 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X85.9269 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X107.1401 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.9269 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X89.3669 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.025 ; Set pressure advance
M117 PA0.025
G1 X110.5801 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.3669 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X89.9284 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.1416 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.9284 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X90.49 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.7032 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X90.49 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X93.93 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.03 ; Set pressure advance
M117 PA0.03
G1 X115.1432 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X93.93 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X94.4916 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X115.7048 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X94.4916 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X95.0531 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X116.2663 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X95.0531 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X98.4931 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.035 ; Set pressure advance
M117 PA0.035
G1 X119.7063 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X98.4931 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X99.0547 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.2679 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.0547 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X99.6162 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.8294 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.6162 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X103.0562 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.04 ; Set pressure advance
M117 PA0.04
G1 X124.2694 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.0562 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X103.6178 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X124.831 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.6178 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X104.1793 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X125.3925 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X104.1793 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X107.6193 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.045 ; Set pressure advance
M117 PA0.045
G1 X128.8325 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X107.6193 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X108.1809 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.3941 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.1809 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X108.7424 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.9556 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.7424 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X112.1824 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.05 ; Set pressure advance
M117 PA0.05
G1 X133.3956 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.1824 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X112.744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X133.9572 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X113.3055 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X134.5188 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X113.3055 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X116.7455 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.055 ; Set pressure advance
M117 PA0.055
G1 X137.9588 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X116.7455 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X117.3071 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X138.5203 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.3071 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X117.8687 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X139.0819 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.8687 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X121.3087 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.06 ; Set pressure advance
M117 PA0.06
G1 X142.5219 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.3087 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X121.8702 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.0834 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.8702 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X122.4318 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X122.4318 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X125.8718 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.065 ; Set pressure advance
M117 PA0.065
G1 X147.085 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X125.8718 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X126.4333 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X147.6465 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.4333 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X126.9949 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X148.2081 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.9949 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X130.4349 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.07 ; Set pressure advance
M117 PA0.07
G1 X151.6481 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.4349 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X130.9964 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.2096 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.9964 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X131.558 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.7712 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X131.558 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X134.998 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.075 ; Set pressure advance
M117 PA0.075
G1 X156.2112 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X134.998 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X135.5595 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X156.7728 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X135.5595 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X136.1211 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X157.3343 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X136.1211 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X139.5611 Y93.7868 F7200 ; Move to next pattern
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.08 ; Set pressure advance
M117 PA0.08
G1 X160.7743 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X139.5611 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X140.1227 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.3359 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.1227 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X140.6842 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.8974 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.6842 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.65 F7200 ; Z hop
G0 X66.5513 Y93.7868 F7200 ; Move back to start position
G1 Z0.45 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G0 X66.5513 Y93.7868 F7200 ; Move to start
G1 Z0.65 F7200 ; Move to z height
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance
M117 PA0
G1 X87.7645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X66.5513 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X67.1129 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.3261 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.1129 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X67.6744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.8876 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.6744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X71.1144 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.005 ; Set pressure advance
M117 PA0.005
G1 X92.3276 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.1144 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X71.676 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X92.8892 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.676 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X72.2376 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X93.4508 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X72.2376 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X75.6776 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.01 ; Set pressure advance
M117 PA0.01
G1 X96.8908 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X75.6776 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X76.2391 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X97.4523 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.2391 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X76.8007 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X98.0139 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.8007 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X80.2407 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.015 ; Set pressure advance
M117 PA0.015
G1 X101.4539 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.2407 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X80.8022 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.0154 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.8022 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X81.3638 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.577 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X81.3638 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X84.8038 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.02 ; Set pressure advance
M117 PA0.02
G1 X106.017 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X84.8038 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X85.3653 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X106.5785 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.3653 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X85.9269 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X107.1401 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.9269 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X89.3669 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.025 ; Set pressure advance
M117 PA0.025
G1 X110.5801 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.3669 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X89.9284 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.1416 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.9284 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X90.49 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.7032 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X90.49 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X93.93 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.03 ; Set pressure advance
M117 PA0.03
G1 X115.1432 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X93.93 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X94.4916 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X115.7048 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X94.4916 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X95.0531 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X116.2663 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X95.0531 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X98.4931 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.035 ; Set pressure advance
M117 PA0.035
G1 X119.7063 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X98.4931 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X99.0547 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.2679 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.0547 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X99.6162 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.8294 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.6162 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X103.0562 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.04 ; Set pressure advance
M117 PA0.04
G1 X124.2694 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.0562 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X103.6178 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X124.831 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.6178 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X104.1793 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X125.3925 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X104.1793 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X107.6193 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.045 ; Set pressure advance
M117 PA0.045
G1 X128.8325 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X107.6193 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X108.1809 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.3941 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.1809 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X108.7424 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.9556 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.7424 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X112.1824 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.05 ; Set pressure advance
M117 PA0.05
G1 X133.3956 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.1824 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X112.744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X133.9572 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X113.3055 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X134.5188 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X113.3055 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X116.7455 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.055 ; Set pressure advance
M117 PA0.055
G1 X137.9588 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X116.7455 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X117.3071 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X138.5203 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.3071 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X117.8687 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X139.0819 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.8687 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X121.3087 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.06 ; Set pressure advance
M117 PA0.06
G1 X142.5219 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.3087 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X121.8702 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.0834 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.8702 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X122.4318 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X122.4318 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X125.8718 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.065 ; Set pressure advance
M117 PA0.065
G1 X147.085 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X125.8718 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X126.4333 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X147.6465 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.4333 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X126.9949 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X148.2081 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.9949 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X130.4349 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.07 ; Set pressure advance
M117 PA0.07
G1 X151.6481 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.4349 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X130.9964 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.2096 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.9964 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X131.558 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.7712 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X131.558 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X134.998 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.075 ; Set pressure advance
M117 PA0.075
G1 X156.2112 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X134.998 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X135.5595 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X156.7728 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X135.5595 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X136.1211 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X157.3343 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X136.1211 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X139.5611 Y93.7868 F7200 ; Move to next pattern
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.08 ; Set pressure advance
M117 PA0.08
G1 X160.7743 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X139.5611 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X140.1227 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.3359 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.1227 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X140.6842 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.8974 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.6842 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z0.85 F7200 ; Z hop
G0 X66.5513 Y93.7868 F7200 ; Move back to start position
G1 Z0.65 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G0 X66.5513 Y93.7868 F7200 ; Move to start
G1 Z0.85 F7200 ; Move to z height
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance
M117 PA0
G1 X87.7645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X66.5513 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X67.1129 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.3261 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.1129 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X67.6744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.8876 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.6744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X71.1144 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.005 ; Set pressure advance
M117 PA0.005
G1 X92.3276 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.1144 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X71.676 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X92.8892 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.676 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X72.2376 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X93.4508 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X72.2376 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X75.6776 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.01 ; Set pressure advance
M117 PA0.01
G1 X96.8908 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X75.6776 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X76.2391 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X97.4523 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.2391 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X76.8007 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X98.0139 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.8007 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X80.2407 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.015 ; Set pressure advance
M117 PA0.015
G1 X101.4539 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.2407 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X80.8022 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.0154 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.8022 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X81.3638 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.577 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X81.3638 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X84.8038 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.02 ; Set pressure advance
M117 PA0.02
G1 X106.017 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X84.8038 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X85.3653 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X106.5785 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.3653 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X85.9269 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X107.1401 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.9269 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X89.3669 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.025 ; Set pressure advance
M117 PA0.025
G1 X110.5801 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.3669 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X89.9284 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.1416 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.9284 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X90.49 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.7032 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X90.49 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X93.93 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.03 ; Set pressure advance
M117 PA0.03
G1 X115.1432 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X93.93 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X94.4916 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X115.7048 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X94.4916 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X95.0531 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X116.2663 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X95.0531 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X98.4931 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.035 ; Set pressure advance
M117 PA0.035
G1 X119.7063 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X98.4931 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X99.0547 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.2679 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.0547 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X99.6162 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.8294 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.6162 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X103.0562 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.04 ; Set pressure advance
M117 PA0.04
G1 X124.2694 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.0562 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X103.6178 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X124.831 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.6178 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X104.1793 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X125.3925 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X104.1793 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X107.6193 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.045 ; Set pressure advance
M117 PA0.045
G1 X128.8325 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X107.6193 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X108.1809 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.3941 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.1809 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X108.7424 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.9556 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.7424 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X112.1824 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.05 ; Set pressure advance
M117 PA0.05
G1 X133.3956 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.1824 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X112.744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X133.9572 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X113.3055 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X134.5188 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X113.3055 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X116.7455 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.055 ; Set pressure advance
M117 PA0.055
G1 X137.9588 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X116.7455 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X117.3071 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X138.5203 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.3071 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X117.8687 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X139.0819 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.8687 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X121.3087 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.06 ; Set pressure advance
M117 PA0.06
G1 X142.5219 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.3087 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X121.8702 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.0834 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.8702 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X122.4318 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X122.4318 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X125.8718 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.065 ; Set pressure advance
M117 PA0.065
G1 X147.085 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X125.8718 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X126.4333 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X147.6465 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.4333 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X126.9949 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X148.2081 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.9949 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X130.4349 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.07 ; Set pressure advance
M117 PA0.07
G1 X151.6481 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.4349 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X130.9964 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.2096 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.9964 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X131.558 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.7712 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X131.558 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X134.998 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.075 ; Set pressure advance
M117 PA0.075
G1 X156.2112 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X134.998 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X135.5595 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X156.7728 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X135.5595 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X136.1211 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X157.3343 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X136.1211 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X139.5611 Y93.7868 F7200 ; Move to next pattern
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.08 ; Set pressure advance
M117 PA0.08
G1 X160.7743 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X139.5611 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X140.1227 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.3359 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.1227 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X140.6842 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.8974 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.6842 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.05 F7200 ; Z hop
G0 X66.5513 Y93.7868 F7200 ; Move back to start position
G1 Z0.85 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G0 X66.5513 Y93.7868 F7200 ; Move to start
G1 Z1.05 F7200 ; Move to z height
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance
M117 PA0
G1 X87.7645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X66.5513 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X67.1129 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.3261 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.1129 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X67.6744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X88.8876 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X67.6744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X71.1144 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.005 ; Set pressure advance
M117 PA0.005
G1 X92.3276 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.1144 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X71.676 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X92.8892 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X71.676 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X72.2376 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X93.4508 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X72.2376 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X75.6776 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.01 ; Set pressure advance
M117 PA0.01
G1 X96.8908 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X75.6776 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X76.2391 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X97.4523 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.2391 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X76.8007 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X98.0139 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X76.8007 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X80.2407 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.015 ; Set pressure advance
M117 PA0.015
G1 X101.4539 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.2407 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X80.8022 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.0154 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X80.8022 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X81.3638 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X102.577 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X81.3638 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X84.8038 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.02 ; Set pressure advance
M117 PA0.02
G1 X106.017 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X84.8038 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X85.3653 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X106.5785 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.3653 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X85.9269 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X107.1401 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X85.9269 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X89.3669 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.025 ; Set pressure advance
M117 PA0.025
G1 X110.5801 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.3669 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X89.9284 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.1416 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X89.9284 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X90.49 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X111.7032 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X90.49 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X93.93 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.03 ; Set pressure advance
M117 PA0.03
G1 X115.1432 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X93.93 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X94.4916 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X115.7048 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X94.4916 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X95.0531 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X116.2663 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X95.0531 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X98.4931 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.035 ; Set pressure advance
M117 PA0.035
G1 X119.7063 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X98.4931 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X99.0547 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.2679 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.0547 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X99.6162 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X120.8294 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X99.6162 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X103.0562 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.04 ; Set pressure advance
M117 PA0.04
G1 X124.2694 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.0562 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X103.6178 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X124.831 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X103.6178 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X104.1793 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X125.3925 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X104.1793 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X107.6193 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.045 ; Set pressure advance
M117 PA0.045
G1 X128.8325 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X107.6193 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X108.1809 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.3941 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.1809 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X108.7424 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X129.9556 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X108.7424 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X112.1824 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.05 ; Set pressure advance
M117 PA0.05
G1 X133.3956 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.1824 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X112.744 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X133.9572 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X112.744 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X113.3055 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X134.5188 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X113.3055 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X116.7455 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.055 ; Set pressure advance
M117 PA0.055
G1 X137.9588 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X116.7455 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X117.3071 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X138.5203 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.3071 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X117.8687 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X139.0819 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X117.8687 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X121.3087 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.06 ; Set pressure advance
M117 PA0.06
G1 X142.5219 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.3087 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X121.8702 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.0834 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X121.8702 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X122.4318 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X143.645 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X122.4318 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X125.8718 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.065 ; Set pressure advance
M117 PA0.065
G1 X147.085 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X125.8718 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X126.4333 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X147.6465 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.4333 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X126.9949 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X148.2081 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X126.9949 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X130.4349 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.07 ; Set pressure advance
M117 PA0.07
G1 X151.6481 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.4349 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X130.9964 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.2096 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X130.9964 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X131.558 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X152.7712 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X131.558 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X134.998 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.075 ; Set pressure advance
M117 PA0.075
G1 X156.2112 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X134.998 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X135.5595 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X156.7728 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X135.5595 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X136.1211 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X157.3343 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X136.1211 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X139.5611 Y93.7868 F7200 ; Move to next pattern
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
SET_PRESSURE_ADVANCE ADVANCE=0.08 ; Set pressure advance
M117 PA0.08
G1 X160.7743 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X139.5611 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X140.1227 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.3359 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.1227 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
G0 X140.6842 Y93.7868 F7200 ; Move to start next pattern perimeter
G1 Z1.05 F7200 ; Z hop return
G1 E0.5 F2100 ; Un-retract
G1 X161.8974 Y115 E1.04271 F7200 ; Print pattern perimeter
G1 X140.6842 Y136.2132 E1.04271 F7200 ; Print pattern perimeter
SET_PRESSURE_ADVANCE ADVANCE=0 ; Set pressure advance back to start value
M117 PA0
G1 E-0.5 F2100 ; Retract
G1 Z1.25 F7200 ; Z hop
;
; End G-code
;
PRINT_END ; End macro
RESTART   ; Restart Klipper to reset PA value
;
; FINISH
;