Jan 28, 2015
ARM: atmel: dt: switch usb gadget to fifo mode
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Nov 19, 2014
ARM: at91: sama5d4: remove i2c pin sleep state configure
As the i2c will use to access device when the device connect to
i2c bus as a wake up source. So, if it in sleep state, it cna not
read the device correctly.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Sep 16, 2014
ARM: at91/SAMA5: rename sama5_android_ubifs_defconfig
we use sama5_android_defconfig for both ubifs and sdcard

Signed-off-by: Royce Jiang <jiangxd@embest-tech.com>
Sep 2, 2014
ARM: at91: sama5d36ek: disable isi for revc board
When work with revc board, we enable audio by default,
and enable audio by default.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Nov 13, 2013
alarmtimer: Implement minimum alarm interval for allowing suspend
alarmtimer suspend return -EBUSY if the next alarm will fire in less
than 2 seconds.  This allows one RTC seconds tick to occur subsequent
to this check before the alarm wakeup time is set, ensuring the wakeup
time is still in the future (assuming the RTC does not tick one more
second prior to setting the alarm).

If suspend is rejected due to an imminent alarm, hold a wakeup source
for 2 seconds to process the alarm prior to reattempting suspend.

If setting the alarm incurs an -ETIME for an alarm set in the past,
or any other problem setting the alarm, abort suspend and hold a
wakelock for 1 second while the alarm is allowed to be serviced or
other hopefully transient conditions preventing the alarm clear up.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Oct 15, 2013
ARM: at91: disable isi enable i2c0 on sama5d36ek board
Disable ISI and enable i2c0 on sama5d36ek board

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Aug 2, 2013
Bluetooth : Add bluetooth support
Modify the sama5d3_android_xx_defconfig file to support the

Signed-off-by: wangdr <wangdr@embedinfo.com>
Jun 17, 2013
ARM: sama5: configure LCD pwm clock prescaler to DIV_32
configure LCD pwm clock prescaler to DIV_32

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Jan 30, 2013
ARM: at91: clock: add sama5 debugfs support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Dec 3, 2012
This is the 3.6.9 stable release