diff --git a/docs/assets/plt-1-buttons.png b/docs/assets/plt-1-buttons.png
new file mode 100644
index 000000000..300f9d09a
Binary files /dev/null and b/docs/assets/plt-1-buttons.png differ
diff --git a/docs/products/general/faq.md b/docs/products/general/faq.md
index 60135d1b6..1efffc0f1 100644
--- a/docs/products/general/faq.md
+++ b/docs/products/general/faq.md
@@ -86,8 +86,12 @@ If your space is not an issue then please reboot or even try reinstalling the es
 
 #### Question:
 
+My CO2 values are way off from my other Apollo devices.
+
 #### Answer:
 
+If your sensor is exposed to high levels of vibrations or too much airflow, the SCD40 CO2 sensor will have issues working properly. https://sensirion.com/products/catalog/SCD40
+
 ---
 
 #### Question:
@@ -96,7 +100,6 @@ If your space is not an issue then please reboot or even try reinstalling the es
 
 ---
 
-### ~~General Troubleshooting Suggestions~~  
-
+### ~~General Troubleshooting Suggestions~~
 
 If your gates are acting strangely and reporting much more energy than they should, make sure there is no tension on the usb cable. One user reported still energy in gates 2 and 3 until the tension was removed from the cable.
\ No newline at end of file
diff --git a/docs/products/plt1/sensor-definitions.md b/docs/products/plt1/sensor-definitions.md
index 8833173ad..dbb7fafd2 100644
--- a/docs/products/plt1/sensor-definitions.md
+++ b/docs/products/plt1/sensor-definitions.md
@@ -111,4 +111,10 @@
 
 #### Uptime: 13 hours 37 minutes
 
-* This shows how long the PLT-1 has been running continuously since its last reboot or power-up. An uptime of 13 hours and 37 minutes indicates that the device has been stable and working for a decent period without any issues.
\ No newline at end of file
+* This shows how long the PLT-1 has been running continuously since its last reboot or power-up. An uptime of 13 hours and 37 minutes indicates that the device has been stable and working for a decent period without any issues.
+
+# Buttons
+
+When looking at the PLT-1 in the below orientation, the boot button is on the left and the reset is on the right by the USB-C port
+
+![](../../assets/plt-1-buttons.png)
\ No newline at end of file