diff --git a/docs/assets/m-1-reflash-click-install-confirm.png b/docs/assets/m-1-reflash-click-install-confirm.png new file mode 100755 index 000000000..36a37cc9d Binary files /dev/null and b/docs/assets/m-1-reflash-click-install-confirm.png differ diff --git a/docs/assets/m-1-reflash-click-install.png b/docs/assets/m-1-reflash-click-install.png new file mode 100755 index 000000000..e67ccf497 Binary files /dev/null and b/docs/assets/m-1-reflash-click-install.png differ diff --git a/docs/assets/m-1-reflash-com-port.png b/docs/assets/m-1-reflash-com-port.png new file mode 100755 index 000000000..2f1590a15 Binary files /dev/null and b/docs/assets/m-1-reflash-com-port.png differ diff --git a/docs/assets/m-1-reflash-connect-button.png b/docs/assets/m-1-reflash-connect-button.png new file mode 100755 index 000000000..025bb826a Binary files /dev/null and b/docs/assets/m-1-reflash-connect-button.png differ diff --git a/docs/assets/m-1-reflash-install-complete.png b/docs/assets/m-1-reflash-install-complete.png new file mode 100755 index 000000000..b715c61a0 Binary files /dev/null and b/docs/assets/m-1-reflash-install-complete.png differ diff --git a/docs/products/m1/setup/getting-started-m1.md b/docs/products/m1/setup/getting-started-m1.md index 18729d1c4..8ea888cb8 100755 --- a/docs/products/m1/setup/getting-started-m1.md +++ b/docs/products/m1/setup/getting-started-m1.md @@ -10,7 +10,7 @@ Congrats on your new M-1! Below we will go through steps to get you up and runni Your device is ready to connect to your Wi-Fi and begin controlling via Home Assistant, the WLED app for iPhone and Android, or via a web browser! -1\. Plug in the USB-C power in and the M-1 device will boot within a couple seconds. Head to the available Wi-Fi networks on your phone and select WLED-AP. It should pop up saying "Welcome to WLED!". If this popup does not occur, please open a web browser and navigate to http://4.3.2.1/ or http://wled.me and you should be prompted with the same image seen below. +1\. Plug in the USB-C power in and the M-1 device will boot within a couple seconds. Head to the available Wi-Fi networks on your phone and select Apollo M-1. It should pop up saying "Welcome to WLED!". If this popup does not occur, please open a web browser and navigate to http://4.3.2.1/ or http://wled.me and you should be prompted with the same image seen below. ![](../../../assets/m-1-getting-started.png) diff --git a/docs/products/m1/troubleshooting/m1-reflash.md b/docs/products/m1/troubleshooting/m1-reflash.md index fe601f09f..12fe32fb2 100755 --- a/docs/products/m1/troubleshooting/m1-reflash.md +++ b/docs/products/m1/troubleshooting/m1-reflash.md @@ -4,28 +4,38 @@ description: Step by step guide for re-flashing the M-1 back to factory firmware --- # Factory Re-Flash M-1 +!!! info "If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can reflash the factory firmware by following the steps below." + + This factory re-flash needs to be done in Chrome, Edge, or another Chromium based browser. + 1\. Plug in a USB cable that supports power and data into your computer. 2\. Push and hold the boot button (the right button). While still holding the button down, plug in a USB-C cable into the USB-C port of your M-1 LED Matrix then let go of the button. ![](../../../assets/m-1-hold-boot-webp.webp) -3\. Download the firmware .bin file from here. +3\. Navigate to our installer page and click connect under Apollo M-1 Installer. + +![](../../../assets/m-1-reflash-connect-button.png) + +4\. Select the open com port then click Connect. + +![](../../../assets/m-1-reflash-com-port.png) -4\. Download ESP Flasher (Windows EXE) and open it. +5\. Click Install M-1. -5\. Click the **Serial Port** dropdown and choose the available COM port.. +![](../../../assets/m-1-reflash-click-install.png) -![](../../../assets/m-1-select-open-com-port.png) +5\. Click Install. -6\. Browse to the firmware file from Step 3 and select it. +![](../../../assets/m-1-reflash-click-install-confirm.png) -![](../../../assets/m-1-select-firmware-you-downloaded.png) +6\. Once you see "Installation complete!" you are finished. Click Next then close out of the browser window. -7\. Click **Flash ESP** and wait for the process to complete. Once it's done, it will appear as shown in the image below. +![](../../../assets/m-1-reflash-install-complete.png) -![](../../../assets/m-1-reflash-completed.png) +!!! warning "Power cycle your device before doing anything else!" -8\. The device is still in **boot mode** and needs to be power cycled. To reboot it, either unplug the power cable or press the **reset button** on the back of the device (the button on the right). + Your device is still in boot mode and needs to be power cycled aka power removed to make it boot in a normal mode! -[Head to the Getting Started article to setup your M-1 as a new device!](https://wiki.apolloautomation.com/products/m1/setup/getting-started-m1/){ .md-button .md-button--primary } \ No newline at end of file +[Head to the Getting Started article to setup your M-1 as a new device!](https://wiki.apolloautomation.com/products/m1/setup/getting-started-m1/){ .md-button .md-button--primary } \ No newline at end of file diff --git a/docs/products/pump1/faq.md b/docs/products/pump1/faq.md index aad300cca..c0cf30d1a 100644 --- a/docs/products/pump1/faq.md +++ b/docs/products/pump1/faq.md @@ -2,5 +2,22 @@ title: PUMP-1 FAQ description: Frequently asked questions about the PUMP-1 Fluid Pump Sensor --- -# NEED TO DO THIS +1\. **What is the maximum distance this pump can push water?** +* The PUMP-1 has been successfully tested with 33 feet of tubing and a vertical lift of 14 feet, while still maintaining strong head pressure. This demonstrates its capability to move water efficiently over long distances and significant elevation gains. + +2\. **What motor is used for the PUMP-1?** + +* The motor used is a jrk-370sh-18215. + +3\. **Question?** + +* Answer. + +4\. **Question?** + +* Answer. + +5\. **Question?** + +* Answer. \ No newline at end of file diff --git a/docs/products/pump1/setup/pump1-sensor-definitions.md b/docs/products/pump1/setup/pump1-sensor-definitions.md index 0c43b9440..30b6ce7a1 100755 --- a/docs/products/pump1/setup/pump1-sensor-definitions.md +++ b/docs/products/pump1/setup/pump1-sensor-definitions.md @@ -90,4 +90,4 @@ This serves as a list of all sensor definitions to help understand what each ent * Shows the time since last reboot. -[Join our Discord if you need more help! :simple-discord:](https://dsc.gg/apolloautomation){ .md-button } \ No newline at end of file +[Join our Discord if you need more help! :simple-discord:](https://dsc.gg/apolloautomation){ .md-button } \ No newline at end of file