diff --git a/docs/assets/2d-config-128-width.gif b/docs/assets/2d-config-128-width.gif
new file mode 100755
index 000000000..7ddbafe17
Binary files /dev/null and b/docs/assets/2d-config-128-width.gif differ
diff --git a/docs/assets/2d-config-192-width.gif b/docs/assets/2d-config-192-width.gif
new file mode 100755
index 000000000..eb5f43926
Binary files /dev/null and b/docs/assets/2d-config-192-width.gif differ
diff --git a/docs/assets/2d-config-256-width.gif b/docs/assets/2d-config-256-width.gif
new file mode 100755
index 000000000..d0a4c6e0f
Binary files /dev/null and b/docs/assets/2d-config-256-width.gif differ
diff --git a/docs/assets/chain-length-2-gif.gif b/docs/assets/chain-length-2-gif.gif
new file mode 100755
index 000000000..836c4de57
Binary files /dev/null and b/docs/assets/chain-length-2-gif.gif differ
diff --git a/docs/assets/chain-length-3-gif.gif b/docs/assets/chain-length-3-gif.gif
new file mode 100755
index 000000000..70070f374
Binary files /dev/null and b/docs/assets/chain-length-3-gif.gif differ
diff --git a/docs/assets/chain-length-4-gif.gif b/docs/assets/chain-length-4-gif.gif
new file mode 100755
index 000000000..cb7ef54c3
Binary files /dev/null and b/docs/assets/chain-length-4-gif.gif differ
diff --git a/docs/assets/reboot-wled-gif.gif b/docs/assets/reboot-wled-gif.gif
new file mode 100755
index 000000000..656679ec0
Binary files /dev/null and b/docs/assets/reboot-wled-gif.gif differ
diff --git a/docs/products/m1/setup/getting-started-m1.md b/docs/products/m1/setup/getting-started-m1.md
index 454b3b6c4..d72359667 100755
--- a/docs/products/m1/setup/getting-started-m1.md
+++ b/docs/products/m1/setup/getting-started-m1.md
@@ -16,7 +16,7 @@ Your device is ready to connect to your Wi-Fi and begin controlling via Home Ass
2\. Tap on **WI-FI Settings** then input your Wi-Fi SSID where it shows **Your\_Network** and input your Wi-Fi password directly below it and then click **Save and Connect**.
-!!! tip "You can also set your hostname here such as \"apollo-led-matrix\" or similar"
+!!! tip "You can also set your hostname here such as apollo-led-matrix"
Later, you can use this to access your device at http://apollo-led-matrix.local in a browser instead of using the IP address!
@@ -60,4 +60,4 @@ Your device is ready to connect to your Wi-Fi and begin controlling via Home Ass
-[Click here to learn how to create your own presets!](https://wiki.apolloautomation.com/products/m1/examples/create-logo-image/){ .md-button .md-button--primary }
\ No newline at end of file
+[Click here to learn how to create your own presets!](https://wiki.apolloautomation.com/products/m1/examples/create-logo-image/){ .md-button .md-button--primary }
\ No newline at end of file
diff --git a/docs/products/m1/setup/m1-multiple-panels.md b/docs/products/m1/setup/m1-multiple-panels.md
index 280f851ff..88249f8e6 100755
--- a/docs/products/m1/setup/m1-multiple-panels.md
+++ b/docs/products/m1/setup/m1-multiple-panels.md
@@ -28,7 +28,7 @@ Choose the number of panels you are using below to get started!
=== "Three Panels"
- 1\. Set both of your M-1 panels face down - the M-1 controller panel should be on the far left. Start by connecting the data cable (ribbon cable) to the "JOUT" port on the far left panel into the "JIN" port on the second panel. Repeat for connecting the third panel.
+ 1\. Set all three of your M-1 panels face down - the M-1 controller panel should be on the far left. Start by connecting the data cable (ribbon cable) to the "JOUT" port on the far left panel into the "JIN" port on the second panel. Repeat for connecting the third panel.
@@ -58,18 +58,48 @@ Choose the number of panels you are using below to get started!
=== "Two Panels"
- 1\. Open WLED and head to the LED Settings
+ 1\. Navigate to your WLED instance in a browser or using the WLED-native app on your phone. You can use http://your-hostname-here.local or its IP address. Click here if you need to find your IP or hostname.
- 2\.
+ 2\. Click on **Config**, then **LED Preferences**. set **Chain Length** to **2** then **Save**.
+
+ 
+
+ 3\. Click on **Config**, then **2D Configuration** and change the **Panel Dimensions** to **128 x 64** and click **Save**.
+
+ 
+
+ 4\. Reboot WLED before proceeding. Tap **Info** at the top, scroll down, and select **Reboot WLED**. When prompted, tap again to confirm the reboot.
+
+ 
=== "Three Panels"
- 1\. Open WLED and head to the LED Settings
+ 1\. Navigate to your WLED instance in a browser or using the WLED-native app on your phone. You can use http://your-hostname-here.local or its IP address. Click here if you need to find your IP or hostname.
+
+ 2\. Click on **Config**, then **LED Preferences**. set **Chain Length** to **3** then **Save**.
+
+ 
+
+ 3\. Click on **Config**, then **2D Configuration** and change the **Panel Dimensions** to **192 x 64** and click **Save**.
- 2\.
+ 
+
+ 4\. Reboot WLED before proceeding. Tap **Info** at the top, scroll down, and select **Reboot WLED**. When prompted, tap again to confirm the reboot.
+
+ 
=== "Four Panels"
- 1\. Open WLED and head to the LED Settings
+ 1\. Navigate to your WLED instance in a browser or using the WLED-native app on your phone. You can use http://your-hostname-here.local or its IP address. Click here if you need to find your IP or hostname.
+
+ 2\. Click on **Config**, then **LED Preferences**. set **Chain Length** to **4** then **Save**.
+
+ 
+
+ 3\. Click on **Config**, then **2D Configuration** and change the **Panel Dimensions** to **256 x 64** and click **Save**.
+
+ 
+
+ 4\. Reboot WLED before proceeding. Tap **Info** at the top, scroll down, and select **Reboot WLED**. When prompted, tap again to confirm the reboot.
- 2\.
\ No newline at end of file
+ 
\ No newline at end of file