Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
716 lines (646 sloc) 31.8 KB
package dns
// Copyright (c) Microsoft and contributors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.
import (
"context"
"github.com/Azure/go-autorest/autorest"
"github.com/Azure/go-autorest/autorest/azure"
"github.com/Azure/go-autorest/autorest/validation"
"github.com/Azure/go-autorest/tracing"
"net/http"
)
// RecordSetsClient is the the DNS Management Client.
type RecordSetsClient struct {
BaseClient
}
// NewRecordSetsClient creates an instance of the RecordSetsClient client.
func NewRecordSetsClient(subscriptionID string) RecordSetsClient {
return NewRecordSetsClientWithBaseURI(DefaultBaseURI, subscriptionID)
}
// NewRecordSetsClientWithBaseURI creates an instance of the RecordSetsClient client.
func NewRecordSetsClientWithBaseURI(baseURI string, subscriptionID string) RecordSetsClient {
return RecordSetsClient{NewWithBaseURI(baseURI, subscriptionID)}
}
// CreateOrUpdate creates or updates a record set within a DNS zone.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// zoneName - the name of the DNS zone (without a terminating dot).
// relativeRecordSetName - the name of the record set, relative to the name of the zone.
// recordType - the type of DNS record in this record set. Record sets of type SOA can be updated but not
// created (they are created when the DNS zone is created).
// parameters - parameters supplied to the CreateOrUpdate operation.
// ifMatch - the etag of the record set. Omit this value to always overwrite the current record set. Specify
// the last-seen etag value to prevent accidentally overwriting any concurrent changes.
// ifNoneMatch - set to '*' to allow a new record set to be created, but to prevent updating an existing record
// set. Other values will be ignored.
func (client RecordSetsClient) CreateOrUpdate(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType, parameters RecordSet, ifMatch string, ifNoneMatch string) (result RecordSet, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.CreateOrUpdate")
defer func() {
sc := -1
if result.Response.Response != nil {
sc = result.Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
if err := validation.Validate([]validation.Validation{
{TargetValue: resourceGroupName,
Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
{TargetValue: client.SubscriptionID,
Constraints: []validation.Constraint{{Target: "client.SubscriptionID", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
return result, validation.NewError("dns.RecordSetsClient", "CreateOrUpdate", err.Error())
}
req, err := client.CreateOrUpdatePreparer(ctx, resourceGroupName, zoneName, relativeRecordSetName, recordType, parameters, ifMatch, ifNoneMatch)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "CreateOrUpdate", nil, "Failure preparing request")
return
}
resp, err := client.CreateOrUpdateSender(req)
if err != nil {
result.Response = autorest.Response{Response: resp}
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "CreateOrUpdate", resp, "Failure sending request")
return
}
result, err = client.CreateOrUpdateResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "CreateOrUpdate", resp, "Failure responding to request")
}
return
}
// CreateOrUpdatePreparer prepares the CreateOrUpdate request.
func (client RecordSetsClient) CreateOrUpdatePreparer(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType, parameters RecordSet, ifMatch string, ifNoneMatch string) (*http.Request, error) {
pathParameters := map[string]interface{}{
"recordType": autorest.Encode("path", recordType),
"relativeRecordSetName": relativeRecordSetName,
"resourceGroupName": autorest.Encode("path", resourceGroupName),
"subscriptionId": autorest.Encode("path", client.SubscriptionID),
"zoneName": autorest.Encode("path", zoneName),
}
const APIVersion = "2017-09-01"
queryParameters := map[string]interface{}{
"api-version": APIVersion,
}
parameters.ID = nil
parameters.Name = nil
parameters.Type = nil
preparer := autorest.CreatePreparer(
autorest.AsContentType("application/json; charset=utf-8"),
autorest.AsPut(),
autorest.WithBaseURL(client.BaseURI),
autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/dnsZones/{zoneName}/{recordType}/{relativeRecordSetName}", pathParameters),
autorest.WithJSON(parameters),
autorest.WithQueryParameters(queryParameters))
if len(ifMatch) > 0 {
preparer = autorest.DecoratePreparer(preparer,
autorest.WithHeader("If-Match", autorest.String(ifMatch)))
}
if len(ifNoneMatch) > 0 {
preparer = autorest.DecoratePreparer(preparer,
autorest.WithHeader("If-None-Match", autorest.String(ifNoneMatch)))
}
return preparer.Prepare((&http.Request{}).WithContext(ctx))
}
// CreateOrUpdateSender sends the CreateOrUpdate request. The method will close the
// http.Response Body if it receives an error.
func (client RecordSetsClient) CreateOrUpdateSender(req *http.Request) (*http.Response, error) {
sd := autorest.GetSendDecorators(req.Context(), azure.DoRetryWithRegistration(client.Client))
return autorest.SendWithSender(client, req, sd...)
}
// CreateOrUpdateResponder handles the response to the CreateOrUpdate request. The method always
// closes the http.Response Body.
func (client RecordSetsClient) CreateOrUpdateResponder(resp *http.Response) (result RecordSet, err error) {
err = autorest.Respond(
resp,
client.ByInspecting(),
azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated),
autorest.ByUnmarshallingJSON(&result),
autorest.ByClosing())
result.Response = autorest.Response{Response: resp}
return
}
// Delete deletes a record set from a DNS zone. This operation cannot be undone.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// zoneName - the name of the DNS zone (without a terminating dot).
// relativeRecordSetName - the name of the record set, relative to the name of the zone.
// recordType - the type of DNS record in this record set. Record sets of type SOA cannot be deleted (they are
// deleted when the DNS zone is deleted).
// ifMatch - the etag of the record set. Omit this value to always delete the current record set. Specify the
// last-seen etag value to prevent accidentally deleting any concurrent changes.
func (client RecordSetsClient) Delete(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType, ifMatch string) (result autorest.Response, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.Delete")
defer func() {
sc := -1
if result.Response != nil {
sc = result.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
if err := validation.Validate([]validation.Validation{
{TargetValue: resourceGroupName,
Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
{TargetValue: client.SubscriptionID,
Constraints: []validation.Constraint{{Target: "client.SubscriptionID", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
return result, validation.NewError("dns.RecordSetsClient", "Delete", err.Error())
}
req, err := client.DeletePreparer(ctx, resourceGroupName, zoneName, relativeRecordSetName, recordType, ifMatch)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Delete", nil, "Failure preparing request")
return
}
resp, err := client.DeleteSender(req)
if err != nil {
result.Response = resp
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Delete", resp, "Failure sending request")
return
}
result, err = client.DeleteResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Delete", resp, "Failure responding to request")
}
return
}
// DeletePreparer prepares the Delete request.
func (client RecordSetsClient) DeletePreparer(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType, ifMatch string) (*http.Request, error) {
pathParameters := map[string]interface{}{
"recordType": autorest.Encode("path", recordType),
"relativeRecordSetName": relativeRecordSetName,
"resourceGroupName": autorest.Encode("path", resourceGroupName),
"subscriptionId": autorest.Encode("path", client.SubscriptionID),
"zoneName": autorest.Encode("path", zoneName),
}
const APIVersion = "2017-09-01"
queryParameters := map[string]interface{}{
"api-version": APIVersion,
}
preparer := autorest.CreatePreparer(
autorest.AsDelete(),
autorest.WithBaseURL(client.BaseURI),
autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/dnsZones/{zoneName}/{recordType}/{relativeRecordSetName}", pathParameters),
autorest.WithQueryParameters(queryParameters))
if len(ifMatch) > 0 {
preparer = autorest.DecoratePreparer(preparer,
autorest.WithHeader("If-Match", autorest.String(ifMatch)))
}
return preparer.Prepare((&http.Request{}).WithContext(ctx))
}
// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client RecordSetsClient) DeleteSender(req *http.Request) (*http.Response, error) {
sd := autorest.GetSendDecorators(req.Context(), azure.DoRetryWithRegistration(client.Client))
return autorest.SendWithSender(client, req, sd...)
}
// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client RecordSetsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
err = autorest.Respond(
resp,
client.ByInspecting(),
azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
autorest.ByClosing())
result.Response = resp
return
}
// Get gets a record set.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// zoneName - the name of the DNS zone (without a terminating dot).
// relativeRecordSetName - the name of the record set, relative to the name of the zone.
// recordType - the type of DNS record in this record set.
func (client RecordSetsClient) Get(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType) (result RecordSet, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.Get")
defer func() {
sc := -1
if result.Response.Response != nil {
sc = result.Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
if err := validation.Validate([]validation.Validation{
{TargetValue: resourceGroupName,
Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
{TargetValue: client.SubscriptionID,
Constraints: []validation.Constraint{{Target: "client.SubscriptionID", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
return result, validation.NewError("dns.RecordSetsClient", "Get", err.Error())
}
req, err := client.GetPreparer(ctx, resourceGroupName, zoneName, relativeRecordSetName, recordType)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Get", nil, "Failure preparing request")
return
}
resp, err := client.GetSender(req)
if err != nil {
result.Response = autorest.Response{Response: resp}
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Get", resp, "Failure sending request")
return
}
result, err = client.GetResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Get", resp, "Failure responding to request")
}
return
}
// GetPreparer prepares the Get request.
func (client RecordSetsClient) GetPreparer(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType) (*http.Request, error) {
pathParameters := map[string]interface{}{
"recordType": autorest.Encode("path", recordType),
"relativeRecordSetName": relativeRecordSetName,
"resourceGroupName": autorest.Encode("path", resourceGroupName),
"subscriptionId": autorest.Encode("path", client.SubscriptionID),
"zoneName": autorest.Encode("path", zoneName),
}
const APIVersion = "2017-09-01"
queryParameters := map[string]interface{}{
"api-version": APIVersion,
}
preparer := autorest.CreatePreparer(
autorest.AsGet(),
autorest.WithBaseURL(client.BaseURI),
autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/dnsZones/{zoneName}/{recordType}/{relativeRecordSetName}", pathParameters),
autorest.WithQueryParameters(queryParameters))
return preparer.Prepare((&http.Request{}).WithContext(ctx))
}
// GetSender sends the Get request. The method will close the
// http.Response Body if it receives an error.
func (client RecordSetsClient) GetSender(req *http.Request) (*http.Response, error) {
sd := autorest.GetSendDecorators(req.Context(), azure.DoRetryWithRegistration(client.Client))
return autorest.SendWithSender(client, req, sd...)
}
// GetResponder handles the response to the Get request. The method always
// closes the http.Response Body.
func (client RecordSetsClient) GetResponder(resp *http.Response) (result RecordSet, err error) {
err = autorest.Respond(
resp,
client.ByInspecting(),
azure.WithErrorUnlessStatusCode(http.StatusOK),
autorest.ByUnmarshallingJSON(&result),
autorest.ByClosing())
result.Response = autorest.Response{Response: resp}
return
}
// ListByDNSZone lists all record sets in a DNS zone.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// zoneName - the name of the DNS zone (without a terminating dot).
// top - the maximum number of record sets to return. If not specified, returns up to 100 record sets.
// recordsetnamesuffix - the suffix label of the record set name that has to be used to filter the record set
// enumerations. If this parameter is specified, Enumeration will return only records that end with
// .<recordSetNameSuffix>
func (client RecordSetsClient) ListByDNSZone(ctx context.Context, resourceGroupName string, zoneName string, top *int32, recordsetnamesuffix string) (result RecordSetListResultPage, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.ListByDNSZone")
defer func() {
sc := -1
if result.rslr.Response.Response != nil {
sc = result.rslr.Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
if err := validation.Validate([]validation.Validation{
{TargetValue: resourceGroupName,
Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
{TargetValue: client.SubscriptionID,
Constraints: []validation.Constraint{{Target: "client.SubscriptionID", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
return result, validation.NewError("dns.RecordSetsClient", "ListByDNSZone", err.Error())
}
result.fn = client.listByDNSZoneNextResults
req, err := client.ListByDNSZonePreparer(ctx, resourceGroupName, zoneName, top, recordsetnamesuffix)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "ListByDNSZone", nil, "Failure preparing request")
return
}
resp, err := client.ListByDNSZoneSender(req)
if err != nil {
result.rslr.Response = autorest.Response{Response: resp}
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "ListByDNSZone", resp, "Failure sending request")
return
}
result.rslr, err = client.ListByDNSZoneResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "ListByDNSZone", resp, "Failure responding to request")
}
return
}
// ListByDNSZonePreparer prepares the ListByDNSZone request.
func (client RecordSetsClient) ListByDNSZonePreparer(ctx context.Context, resourceGroupName string, zoneName string, top *int32, recordsetnamesuffix string) (*http.Request, error) {
pathParameters := map[string]interface{}{
"resourceGroupName": autorest.Encode("path", resourceGroupName),
"subscriptionId": autorest.Encode("path", client.SubscriptionID),
"zoneName": autorest.Encode("path", zoneName),
}
const APIVersion = "2017-09-01"
queryParameters := map[string]interface{}{
"api-version": APIVersion,
}
if top != nil {
queryParameters["$top"] = autorest.Encode("query", *top)
}
if len(recordsetnamesuffix) > 0 {
queryParameters["$recordsetnamesuffix"] = autorest.Encode("query", recordsetnamesuffix)
}
preparer := autorest.CreatePreparer(
autorest.AsGet(),
autorest.WithBaseURL(client.BaseURI),
autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/dnsZones/{zoneName}/recordsets", pathParameters),
autorest.WithQueryParameters(queryParameters))
return preparer.Prepare((&http.Request{}).WithContext(ctx))
}
// ListByDNSZoneSender sends the ListByDNSZone request. The method will close the
// http.Response Body if it receives an error.
func (client RecordSetsClient) ListByDNSZoneSender(req *http.Request) (*http.Response, error) {
sd := autorest.GetSendDecorators(req.Context(), azure.DoRetryWithRegistration(client.Client))
return autorest.SendWithSender(client, req, sd...)
}
// ListByDNSZoneResponder handles the response to the ListByDNSZone request. The method always
// closes the http.Response Body.
func (client RecordSetsClient) ListByDNSZoneResponder(resp *http.Response) (result RecordSetListResult, err error) {
err = autorest.Respond(
resp,
client.ByInspecting(),
azure.WithErrorUnlessStatusCode(http.StatusOK),
autorest.ByUnmarshallingJSON(&result),
autorest.ByClosing())
result.Response = autorest.Response{Response: resp}
return
}
// listByDNSZoneNextResults retrieves the next set of results, if any.
func (client RecordSetsClient) listByDNSZoneNextResults(ctx context.Context, lastResults RecordSetListResult) (result RecordSetListResult, err error) {
req, err := lastResults.recordSetListResultPreparer(ctx)
if err != nil {
return result, autorest.NewErrorWithError(err, "dns.RecordSetsClient", "listByDNSZoneNextResults", nil, "Failure preparing next results request")
}
if req == nil {
return
}
resp, err := client.ListByDNSZoneSender(req)
if err != nil {
result.Response = autorest.Response{Response: resp}
return result, autorest.NewErrorWithError(err, "dns.RecordSetsClient", "listByDNSZoneNextResults", resp, "Failure sending next results request")
}
result, err = client.ListByDNSZoneResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "listByDNSZoneNextResults", resp, "Failure responding to next results request")
}
return
}
// ListByDNSZoneComplete enumerates all values, automatically crossing page boundaries as required.
func (client RecordSetsClient) ListByDNSZoneComplete(ctx context.Context, resourceGroupName string, zoneName string, top *int32, recordsetnamesuffix string) (result RecordSetListResultIterator, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.ListByDNSZone")
defer func() {
sc := -1
if result.Response().Response.Response != nil {
sc = result.page.Response().Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
result.page, err = client.ListByDNSZone(ctx, resourceGroupName, zoneName, top, recordsetnamesuffix)
return
}
// ListByType lists the record sets of a specified type in a DNS zone.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// zoneName - the name of the DNS zone (without a terminating dot).
// recordType - the type of record sets to enumerate.
// top - the maximum number of record sets to return. If not specified, returns up to 100 record sets.
// recordsetnamesuffix - the suffix label of the record set name that has to be used to filter the record set
// enumerations. If this parameter is specified, Enumeration will return only records that end with
// .<recordSetNameSuffix>
func (client RecordSetsClient) ListByType(ctx context.Context, resourceGroupName string, zoneName string, recordType RecordType, top *int32, recordsetnamesuffix string) (result RecordSetListResultPage, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.ListByType")
defer func() {
sc := -1
if result.rslr.Response.Response != nil {
sc = result.rslr.Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
if err := validation.Validate([]validation.Validation{
{TargetValue: resourceGroupName,
Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
{TargetValue: client.SubscriptionID,
Constraints: []validation.Constraint{{Target: "client.SubscriptionID", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
return result, validation.NewError("dns.RecordSetsClient", "ListByType", err.Error())
}
result.fn = client.listByTypeNextResults
req, err := client.ListByTypePreparer(ctx, resourceGroupName, zoneName, recordType, top, recordsetnamesuffix)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "ListByType", nil, "Failure preparing request")
return
}
resp, err := client.ListByTypeSender(req)
if err != nil {
result.rslr.Response = autorest.Response{Response: resp}
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "ListByType", resp, "Failure sending request")
return
}
result.rslr, err = client.ListByTypeResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "ListByType", resp, "Failure responding to request")
}
return
}
// ListByTypePreparer prepares the ListByType request.
func (client RecordSetsClient) ListByTypePreparer(ctx context.Context, resourceGroupName string, zoneName string, recordType RecordType, top *int32, recordsetnamesuffix string) (*http.Request, error) {
pathParameters := map[string]interface{}{
"recordType": autorest.Encode("path", recordType),
"resourceGroupName": autorest.Encode("path", resourceGroupName),
"subscriptionId": autorest.Encode("path", client.SubscriptionID),
"zoneName": autorest.Encode("path", zoneName),
}
const APIVersion = "2017-09-01"
queryParameters := map[string]interface{}{
"api-version": APIVersion,
}
if top != nil {
queryParameters["$top"] = autorest.Encode("query", *top)
}
if len(recordsetnamesuffix) > 0 {
queryParameters["$recordsetnamesuffix"] = autorest.Encode("query", recordsetnamesuffix)
}
preparer := autorest.CreatePreparer(
autorest.AsGet(),
autorest.WithBaseURL(client.BaseURI),
autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/dnsZones/{zoneName}/{recordType}", pathParameters),
autorest.WithQueryParameters(queryParameters))
return preparer.Prepare((&http.Request{}).WithContext(ctx))
}
// ListByTypeSender sends the ListByType request. The method will close the
// http.Response Body if it receives an error.
func (client RecordSetsClient) ListByTypeSender(req *http.Request) (*http.Response, error) {
sd := autorest.GetSendDecorators(req.Context(), azure.DoRetryWithRegistration(client.Client))
return autorest.SendWithSender(client, req, sd...)
}
// ListByTypeResponder handles the response to the ListByType request. The method always
// closes the http.Response Body.
func (client RecordSetsClient) ListByTypeResponder(resp *http.Response) (result RecordSetListResult, err error) {
err = autorest.Respond(
resp,
client.ByInspecting(),
azure.WithErrorUnlessStatusCode(http.StatusOK),
autorest.ByUnmarshallingJSON(&result),
autorest.ByClosing())
result.Response = autorest.Response{Response: resp}
return
}
// listByTypeNextResults retrieves the next set of results, if any.
func (client RecordSetsClient) listByTypeNextResults(ctx context.Context, lastResults RecordSetListResult) (result RecordSetListResult, err error) {
req, err := lastResults.recordSetListResultPreparer(ctx)
if err != nil {
return result, autorest.NewErrorWithError(err, "dns.RecordSetsClient", "listByTypeNextResults", nil, "Failure preparing next results request")
}
if req == nil {
return
}
resp, err := client.ListByTypeSender(req)
if err != nil {
result.Response = autorest.Response{Response: resp}
return result, autorest.NewErrorWithError(err, "dns.RecordSetsClient", "listByTypeNextResults", resp, "Failure sending next results request")
}
result, err = client.ListByTypeResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "listByTypeNextResults", resp, "Failure responding to next results request")
}
return
}
// ListByTypeComplete enumerates all values, automatically crossing page boundaries as required.
func (client RecordSetsClient) ListByTypeComplete(ctx context.Context, resourceGroupName string, zoneName string, recordType RecordType, top *int32, recordsetnamesuffix string) (result RecordSetListResultIterator, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.ListByType")
defer func() {
sc := -1
if result.Response().Response.Response != nil {
sc = result.page.Response().Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
result.page, err = client.ListByType(ctx, resourceGroupName, zoneName, recordType, top, recordsetnamesuffix)
return
}
// Update updates a record set within a DNS zone.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// zoneName - the name of the DNS zone (without a terminating dot).
// relativeRecordSetName - the name of the record set, relative to the name of the zone.
// recordType - the type of DNS record in this record set.
// parameters - parameters supplied to the Update operation.
// ifMatch - the etag of the record set. Omit this value to always overwrite the current record set. Specify
// the last-seen etag value to prevent accidentally overwriting concurrent changes.
func (client RecordSetsClient) Update(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType, parameters RecordSet, ifMatch string) (result RecordSet, err error) {
if tracing.IsEnabled() {
ctx = tracing.StartSpan(ctx, fqdn+"/RecordSetsClient.Update")
defer func() {
sc := -1
if result.Response.Response != nil {
sc = result.Response.Response.StatusCode
}
tracing.EndSpan(ctx, sc, err)
}()
}
if err := validation.Validate([]validation.Validation{
{TargetValue: resourceGroupName,
Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
{TargetValue: client.SubscriptionID,
Constraints: []validation.Constraint{{Target: "client.SubscriptionID", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
return result, validation.NewError("dns.RecordSetsClient", "Update", err.Error())
}
req, err := client.UpdatePreparer(ctx, resourceGroupName, zoneName, relativeRecordSetName, recordType, parameters, ifMatch)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Update", nil, "Failure preparing request")
return
}
resp, err := client.UpdateSender(req)
if err != nil {
result.Response = autorest.Response{Response: resp}
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Update", resp, "Failure sending request")
return
}
result, err = client.UpdateResponder(resp)
if err != nil {
err = autorest.NewErrorWithError(err, "dns.RecordSetsClient", "Update", resp, "Failure responding to request")
}
return
}
// UpdatePreparer prepares the Update request.
func (client RecordSetsClient) UpdatePreparer(ctx context.Context, resourceGroupName string, zoneName string, relativeRecordSetName string, recordType RecordType, parameters RecordSet, ifMatch string) (*http.Request, error) {
pathParameters := map[string]interface{}{
"recordType": autorest.Encode("path", recordType),
"relativeRecordSetName": relativeRecordSetName,
"resourceGroupName": autorest.Encode("path", resourceGroupName),
"subscriptionId": autorest.Encode("path", client.SubscriptionID),
"zoneName": autorest.Encode("path", zoneName),
}
const APIVersion = "2017-09-01"
queryParameters := map[string]interface{}{
"api-version": APIVersion,
}
parameters.ID = nil
parameters.Name = nil
parameters.Type = nil
preparer := autorest.CreatePreparer(
autorest.AsContentType("application/json; charset=utf-8"),
autorest.AsPatch(),
autorest.WithBaseURL(client.BaseURI),
autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/dnsZones/{zoneName}/{recordType}/{relativeRecordSetName}", pathParameters),
autorest.WithJSON(parameters),
autorest.WithQueryParameters(queryParameters))
if len(ifMatch) > 0 {
preparer = autorest.DecoratePreparer(preparer,
autorest.WithHeader("If-Match", autorest.String(ifMatch)))
}
return preparer.Prepare((&http.Request{}).WithContext(ctx))
}
// UpdateSender sends the Update request. The method will close the
// http.Response Body if it receives an error.
func (client RecordSetsClient) UpdateSender(req *http.Request) (*http.Response, error) {
sd := autorest.GetSendDecorators(req.Context(), azure.DoRetryWithRegistration(client.Client))
return autorest.SendWithSender(client, req, sd...)
}
// UpdateResponder handles the response to the Update request. The method always
// closes the http.Response Body.
func (client RecordSetsClient) UpdateResponder(resp *http.Response) (result RecordSet, err error) {
err = autorest.Respond(
resp,
client.ByInspecting(),
azure.WithErrorUnlessStatusCode(http.StatusOK),
autorest.ByUnmarshallingJSON(&result),
autorest.ByClosing())
result.Response = autorest.Response{Response: resp}
return
}
You can’t perform that action at this time.