Permalink
Browse files

Fixed links in readmes

  • Loading branch information...
olivierbloch committed Jan 13, 2017
1 parent d70e049 commit 714d08caa4a668684b5fcb08df7675650188433a
Showing with 2 additions and 2 deletions.
  1. +1 −1 Devices/readme.md
  2. +1 −1 SupportedDevices.md
View
@@ -15,7 +15,7 @@ You will find all the instructions to create device IDs and retrieve connection
## ConnectTheDots getting started project using Raspberry Pi and Arduino ##
For this project, follow the instructions for configuring the following:
-1. [Arduino UNO with weather shield](GatewayConnectedDevices/Arduino%20UNO/Weather/WeatherShieldJson/Arduino-and-Weather-Shield-setup.md)
+1. [Arduino UNO with weather shield](GatewayConnectedDevices/Arduino UNO/Weather/WeatherShieldJson/Arduino-and-Weather-Shield-setup.md)
2. [Raspberry Pi](Gateways/GatewayService/RaspberryPi-Gateway-setup.md)
## Connect The Dots with all the other devices ##
View
@@ -5,7 +5,7 @@ Below you'll find a list of supported devices, which can be found under each par
### Connect The Dots Getting Started With RPi and Arduino project ###
If you are going to deploy the getting started project, you need to procure an Arduino UNO and Raspberry Pi, as shown in the documentation for those devices in the appropriate folders:
-- [Arduino UNO R3 and weather shield](Devices/GatewayConnectedDevices/Arduino%20UNO/Weather/WeatherShieldJson/Hardware.md)
+- [Arduino UNO R3 and weather shield](./Devices/GatewayConnectedDevices/Arduino UNO/Weather/WeatherShieldJson/Hardware.md)
- [Raspberry Pi](Devices/Gateways/GatewayService/Hardware.md)
Once you have these, head over to the [Getting Started With RPi and Arduino project](GettingStarted.md) to get going.

0 comments on commit 714d08c

Please sign in to comment.