Skip to content
Permalink
Browse files

Updated configurations

Updated configuration for BCN3D+, dual and paste
  • Loading branch information...
Terabyte11
Terabyte11 committed Nov 12, 2015
1 parent 68acbff commit 761c44ae3db0da1ab12e9d104ab0b523617b499a
Showing with 27,318 additions and 721 deletions.
  1. +120 −0 BCN3D+/ABS/ABS_ST_1014.ini
  2. +20 −0 BCN3D+/Configuraciones.txt
  3. +49 −52 ...n/NYLON_ST_FINAL.ini → BCN3D+/Filaflex (Only 0.6 nozzle)/Filaflex_ST_0604 (Solo boquilla 0.6).ini
  4. +120 −0 BCN3D+/Nylon/Nylon_ST_0314.ini
  5. +37 −40 Single Extruder/Slic3r/ABS/ABS_HQ_0314.ini → BCN3D+/PLA/PLA_HQ_0215.ini
  6. +11 −14 Single Extruder/Slic3r/PLA/PLA_HS_0314.ini → BCN3D+/PLA/PLA_HS_0215.ini
  7. +120 −0 BCN3D+/PLA/PLA_STR_0215.ini
  8. +120 −0 BCN3D+/PLA/PLA_ST_0215.ini
  9. +16 −19 Single Extruder/Slic3r/PLA/PLA_SV_0314.ini → BCN3D+/PLA/PLA_SV_0215.ini
  10. +27 −27 Single Extruder/Slic3r/Filaflex/Filaflex_Slic3r_ST.ini → BCN3D+/PLA/PLA_WALL_0215.ini
  11. 0 Dual Extruder/{Calibration → Calibration, set up}/Calib.amf
  12. 0 Dual Extruder/{Slic3r → Calibration, set up}/Dual_PLA_Slic3r.ini
  13. BIN Dual Extruder/Calibration/Calib1.STL
  14. BIN Dual Extruder/Calibration/Calib2.STL
  15. +120 −0 Dual Extruder/Configurations Single extruder Slicer/ABS_ST_1014.ini
  16. +20 −0 Dual Extruder/Configurations Single extruder Slicer/Configuraciones.txt
  17. +120 −0 Dual Extruder/Configurations Single extruder Slicer/Nylon_ST_0314.ini
  18. +18 −21 .../Slic3r/PLA/PLA_HQ_0314.ini → Dual Extruder/Configurations Single extruder Slicer/PLA_HQ_1014.ini
  19. +120 −0 Dual Extruder/Configurations Single extruder Slicer/PLA_HS_1014.ini
  20. +19 −22 ...lic3r/PLA/PLA_STR_0214.ini → Dual Extruder/Configurations Single extruder Slicer/PLA_STR_1014.ini
  21. +19 −22 .../Slic3r/PLA/PLA_ST_0314.ini → Dual Extruder/Configurations Single extruder Slicer/PLA_ST_1014.ini
  22. +19 −22 ...c3r/PLA/PLA_WALL_0314.ini → Dual Extruder/Configurations Single extruder Slicer/PLA_WALL_1014.ini
  23. +0 −155 Dual Extruder/Cura/Dual_ABS_Cura.ini
  24. +0 −155 Dual Extruder/Cura/Dual_PLA_Cura.ini
  25. +256 −0 Dual Extruder/Dual_ABS_04_ABS_04_Cura.ini
  26. +15 −18 Dual Extruder/{Slic3r/Dual_ABS_Slic3r.ini → Dual_ABS_04_ABS_04_Slic3r.ini}
  27. +120 −0 Dual Extruder/Dual_PLA_04_ABS_04_Slic3r.ini
  28. +256 −0 Dual Extruder/Dual_PLA_04_PLA_04_Cura.ini
  29. +256 −0 Dual Extruder/Dual_PLA_04_PVA_04_Cura.ini
  30. +120 −0 Paste extruder/Files for the set up, first run/Configurations/PasteExtruder.ini
  31. +120 −0 Paste extruder/Files for the set up, first run/Configurations/SpiralVasePasteExtruder.ini
  32. +1,626 −0 Paste extruder/Files for the set up, first run/Gcodes/BCN3d+.gcode
  33. +4 −0 Paste extruder/Files for the set up, first run/Gcodes/Indicaciones para los Gcodes.txt
  34. +8,964 −0 Paste extruder/Files for the set up, first run/Gcodes/bulbasaur.gcode
  35. +2,685 −0 Paste extruder/Files for the set up, first run/Gcodes/star-vase.gcode
  36. +11,519 −0 Paste extruder/Files for the set up, first run/Gcodes/star.gcode
  37. BIN Paste extruder/Files for the set up, first run/STLs/bulbasaur.STL
  38. BIN Paste extruder/Files for the set up, first run/STLs/star-vase.stl
  39. BIN Paste extruder/Files for the set up, first run/STLs/star.stl
  40. +31 −31 Single Extruder/Cura/Filaflex/Filaflex_Cura_ST.ini → Paste extruder/PLA04002020Plunger3.ini
  41. +251 −0 Paste extruder/PLA04002520Link.ini
  42. +0 −123 Single Extruder/Slic3r/ABS/ABS_ST_0314.ini
@@ -0,0 +1,120 @@
# generated by Slic3r 1.1.7 on Mon Feb 23 16:25:12 2015
avoid_crossing_perimeters = 0
bed_size = 250,200
bed_temperature = 70
bottom_solid_layers = 2
bridge_acceleration = 2000
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 80
brim_width = 3
complete_objects = 0
cooling = 1
default_acceleration = 1500
disable_fan_first_layers = 5
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off Hot End\nM120 S0; turn off Hot Bed\nM140 S0\nG1 X230 Y210 E0; \nM84 ; disable motors
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 15
filament_diameter = 2.92
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 500
first_layer_bed_temperature = 70
first_layer_extrusion_width = 130%
first_layer_height = 0.3
first_layer_speed = 10
first_layer_temperature = 250
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 1500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_gcode =
layer_height = 0.2
max_fan_speed = 0
min_fan_speed = 0
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 3
post_process =
print_center = 125,100
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 3
retract_length_toolchange = 3
retract_lift = 0.05
retract_restart_extra = -0.05
retract_restart_extra_toolchange = 0
retract_speed = 35
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 3
slowdown_below_layer_time = 15
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0.5
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 45
temperature = 250
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0.3
top_solid_infill_speed = 30
top_solid_layers = 4
travel_speed = 200
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0
@@ -0,0 +1,20 @@
Las configuraciones han sido pensadas para la BCN3D+ con boquilla de 0,4mm.

Deben servir como punto de partida y pueden ser mejoradas para ir m�s deprisa, conseguir un mejor acabado...

Las abreviaturas corresponden a:

ST: Configuraci�n estandard con altura de capa de 0,2mm para la mayor�a de construcciones.

HQ: Configuraci�n estandard de alta calidad con altura de capa de 0,1mm para la mayor�a de construcciones.

HS: Configuraci�n pensada para trabajos en los que necesitamos obtener el modelo de una forma r�pida, sin perder mucha calidad.
Para ello, se configura una altura de capa de 0,25, un infill del 10%, se realizan s�lamente 2 per�metros y se aumenta la velocidad.

SV: Configuraci�n especial para piezas tipo envase. No hay infill y la pieza se va fabricando en espiral con una �nica superifie, mejorando el acabado superficial.

WALL: Configuraci�n especial para piezas con geomtr�as muy "ex�ticas", como las que se generan con el algoritmo Voronoi, con su m�ximo exponente en el dise�ador Dizingof.
No tiene infill y se baja la temperatura y velocidad para mejorar los voladizos.

STR: Configuraci�n especial para piezas que requieren unos esfuerzos mec�nicos importantes.
El infil se realiza en panel de abeja y se disminuye la altura de capa a 0,15mm para mejorar la adhesi�n enetre las capas.
@@ -1,42 +1,41 @@
# generated by Slic3r 1.0.0RC2 on Mon Apr 7 14:44:26 2014
# generated by Slic3r 1.1.7 on Thu Jun 4 09:46:47 2015
avoid_crossing_perimeters = 0
bed_size = 230,210
bed_size = 250,200
bed_temperature = 0
bottom_solid_layers = 2
bottom_solid_layers = 3
bridge_acceleration = 2000
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 15
bridge_speed = 50
brim_width = 0
complete_objects = 0
cooling =
cooling = 1
default_acceleration = 1500
disable_fan_first_layers = 2
duplicate = 1
dont_support_bridges = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off Hot End\nM120 S0; turn off Hot Bed\nM140 S0\nG1 X230 Y210 E0; \nM84 ; disable motors
external_perimeter_speed = 40
external_perimeters_first =
external_perimeter_speed = 10
external_perimeters_first = 1
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_multiplier = 1.7
extrusion_width = 0
fan_always_on =
fan_below_layer_time = 10
filament_diameter = 2.92
fan_always_on = 0
fan_below_layer_time = 30
filament_diameter = 2.85
fill_angle = 45
fill_density = 0.3
fill_pattern = rectilinear
fill_density = 12%
fill_pattern = honeycomb
first_layer_acceleration = 500
first_layer_bed_temperature = 0
first_layer_extrusion_width = 150%
first_layer_extrusion_width = 200%
first_layer_height = 0.3
first_layer_speed = 10
first_layer_temperature = 220
first_layer_temperature = 235
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
@@ -45,77 +44,75 @@ gcode_flavor = reprap
infill_acceleration = 1500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_extrusion_width = 120%
infill_first = 0
infill_only_where_needed =
infill_speed = 50
infill_only_where_needed = 0
infill_speed = 15
interface_shells = 0
layer_gcode =
layer_height = 0.20
layer_height = 0.2
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
nozzle_diameter = 0.6
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 3
perimeter_speed = 12
perimeters = 2
post_process =
print_center = 115,105
print_center = 125,100
raft_layers = 0
randomize_start = 1
resolution = 0
retract_before_travel = 1
retract_before_travel = 2
retract_layer_change = 1
retract_length = 2
retract_length_toolchange = 3
retract_lift = 0.05
retract_length = 3
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
rotate = 0
scale = 1
skirt_distance = 0
retract_speed = 40
seam_position = random
skirt_distance = 6
skirt_height = 1
skirts = 3
slowdown_below_layer_time = 13
small_perimeter_speed = 30
skirts = 2
slowdown_below_layer_time = 30
small_perimeter_speed = 15
solid_fill_pattern = rectilinear
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0.5
solid_infill_speed = 40
solid_infill_extrusion_width = 120%
solid_infill_speed = 15
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 0
support_material =
start_gcode = G28 ; home all axes\n
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_spacing = 1
support_material_speed = 15
support_material_threshold = 45
temperature = 230
temperature = 225
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0.3
top_solid_infill_speed = 40
top_solid_layers = 5
travel_speed = 200
top_infill_extrusion_width = 120%
top_solid_infill_speed = 15
top_solid_layers = 3
travel_speed = 150
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0

0 comments on commit 761c44a

Please sign in to comment.
You can’t perform that action at this time.