diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Clasp Female.stl b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Clasp Female.stl
new file mode 100644
index 00000000000..7c52f147275
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Clasp Female.stl differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Clasp Male.stl b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Clasp Male.stl
new file mode 100644
index 00000000000..48bb5f58642
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Clasp Male.stl differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Link.stl b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Link.stl
new file mode 100644
index 00000000000..7e8e34fdea5
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Link.stl differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Omi Watch Band Main (With Band).stl b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Omi Watch Band Main (With Band).stl
new file mode 100644
index 00000000000..7ffb5f0a62b
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Omi Watch Band Main (With Band).stl differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Omi Watch Band.3mf b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Omi Watch Band.3mf
new file mode 100644
index 00000000000..f78caa2d042
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Omi Watch Band.3mf differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_153948756.jpg b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_153948756.jpg
new file mode 100644
index 00000000000..0243fe9b620
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_153948756.jpg differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154006011.jpg b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154006011.jpg
new file mode 100644
index 00000000000..de3719f4aff
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154006011.jpg differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154028823.jpg b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154028823.jpg
new file mode 100644
index 00000000000..66c5e5b9d85
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154028823.jpg differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154049648.jpg b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154049648.jpg
new file mode 100644
index 00000000000..2b2ee25ab77
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/PXL_20250813_154049648.jpg differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/README.md b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/README.md
new file mode 100644
index 00000000000..607364b32f8
--- /dev/null
+++ b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/README.md	
@@ -0,0 +1,26 @@
+# MUST READ BEFORE PRINTING
+
+This is a watch band for the Omi AI Wearable that requires **NO assembly** and **NO supports**, only a little preparation in the _slicer_.
+First, figure out how many chain links (Link.stl) you need. To do this, follow this formula:
+
+(circumference of wrist where you want the watch in centimeters - 5.8cm) / 0.544 rounded up (ex: 16.97 to 17) then add one 1
+
+Either you can modify the .3mf file provided or follow the next steps to set it up yourself.
+
+Next, in the slicer, add the main housing (Omi Watch Band Main (With Band).stl) in the center, then add the chain links, half on each side, and add the male clasp (Clasp Male.stl) and female clasp (Clasp Female.stl) on either side.
+
+Make sure the holes are properly aligned and the layer height should be .08 (whatever the smallest layer height you can get is).
+
+<img width="600" height="820" alt="Screenshot 2025_08-13_112344" src="https://github.com/user-attachments/assets/78badd56-341b-4fe4-a0a6-5a0b7c5a4bdd" />
+
+
+This is what it should look like in the slicer:
+
+
+<img width="600" height="647" alt="Screenshot 2025_08-13_114130" src="https://github.com/user-attachments/assets/fe99ae2b-1e14-4f23-beb2-504412d02d6f" />
+
+
+After having printed the model, buckle and unbuckle the clasp at least 10 times to loosen it up a little so that it is easier to put on and remove.
+
+Finally, enjoy!
+
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Screenshot 2025_08-13_112344.png b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Screenshot 2025_08-13_112344.png
new file mode 100644
index 00000000000..f248be88ce2
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Screenshot 2025_08-13_112344.png differ
diff --git a/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Screenshot 2025_08-13_114130.png b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Screenshot 2025_08-13_114130.png
new file mode 100644
index 00000000000..b7a6ad2bab0
Binary files /dev/null and b/omi/hardware/consumer-watch-band/Updated Complete Watch Band/Screenshot 2025_08-13_114130.png differ