Removed Tone Mapping tooltip #2221

rtdata/languages/Catala

@@ -1611,7 +1611,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
 !SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
 !SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_LI;Linear
 !TP_BWMIX_ALGO_SP;Special effects
@@ -1874,7 +1874,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
 !TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
 !TP_EPD_GAMMA;Gamma
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
 !TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
 !TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.

rtdata/languages/Chinese (Simplified)

@@ -1599,7 +1599,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !THRESHOLDSELECTOR_T;Top
 !THRESHOLDSELECTOR_TL;Top-left
 !THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal <b>linear</b> response.\nSpecial effects: will produce special effects by mixing channels <b>non-linearly</b>.
 !TP_BWMIX_CC_ENABLED;Adjust complementary color
@@ -1819,7 +1819,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_EPD_EDGESTOPPING;Edge stopping
 !TP_EPD_GAMMA;Gamma
 !TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 !TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
 !TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.

rtdata/languages/Chinese (Traditional)

@@ -1413,7 +1413,7 @@ TP_WBALANCE_TEMPERATURE;色溫
 !THRESHOLDSELECTOR_T;Top
 !THRESHOLDSELECTOR_TL;Top-left
 !THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_LI;Linear
 !TP_BWMIX_ALGO_SP;Special effects
@@ -1702,7 +1702,6 @@ TP_WBALANCE_TEMPERATURE;色溫
 !TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
 !TP_EPD_SCALE;Scale
 !TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 !TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
 !TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.

rtdata/languages/Czech

@@ -1666,7 +1666,6 @@ TP_EPD_LABEL;Mapování tónů
 TP_EPD_REWEIGHTINGITERATES;Počet průchodů převážení
 TP_EPD_SCALE;Měřítko
 TP_EPD_STRENGTH;Síla
-TP_EPD_TOOLTIP;Mapování tónů je dostupné v L*a*b* (standard) a CIECAM02 módu.\n\nV L*a*b* módu může být mapování tónů použito i pro zůstatkový obraz nástroje Vlnka\n\nPro zapnutí mapování tónů v CIECAM02  módu zapněte prosím následující volby:\n1. CIECAM02\n2. Algoritmus="Jas a pestrobarevnost (QM)"\n3. "Mapování tónů pomocí jasu CIECAM02 (Q)"
 TP_EXPOSURE_AUTOLEVELS;Automatické úrovně
 TP_EXPOSURE_AUTOLEVELS_TIP;Přepne provedení Automatické úrovně na automatickou sadu hodnot parametrů založených na analýze obrázku\nPokud to je nezbytné, povolí rekonstrukci světel.
 TP_EXPOSURE_BLACKLEVEL;Černá

rtdata/languages/Dansk

@@ -1410,7 +1410,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
 !THRESHOLDSELECTOR_T;Top
 !THRESHOLDSELECTOR_TL;Top-left
 !THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_LI;Linear
 !TP_BWMIX_ALGO_SP;Special effects
@@ -1699,7 +1699,6 @@ TP_WBALANCE_TEMPERATURE;Temperatur
 !TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
 !TP_EPD_SCALE;Scale
 !TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 !TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
 !TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.

rtdata/languages/Deutsch

@@ -1707,7 +1707,6 @@ TP_EPD_LABEL;Tonwertkorrektur
 TP_EPD_REWEIGHTINGITERATES;Iterationen
 TP_EPD_SCALE;Faktor
 TP_EPD_STRENGTH;Intensität
-TP_EPD_TOOLTIP;Tonwertkorrektur ist mit dem L*a*b*- und CIECAM02-Modus möglich.\n\nFür den CIECAM02-Modus müssen folgende Optionen aktiviert sein:\n1. CIECAM02\n2. Algorithmus = Helligkeit + Farbigkeit (QM)\n3. Tonwertkorrektur mittels CIECAM02-Helligkeit (Q)
 TP_EXPOSURE_AUTOLEVELS;Auto
 TP_EXPOSURE_AUTOLEVELS_TIP;Automatische Belichtungseinstellung\nbasierend auf Bildanalyse.
 TP_EXPOSURE_BLACKLEVEL;Schwarzwert

rtdata/languages/English (UK)

@@ -53,7 +53,7 @@ PREFERENCES_PRTPROFILE;Colour profile
 PREFERENCES_TAB_COLORMGR;Colour Management
 SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colours with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
 SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Colour Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-TOOLBAR_TOOLTIP_COLORPICKER;Lockable Colour Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+TOOLBAR_TOOLTIP_COLORPICKER;Lockable Colour Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 TOOLBAR_TOOLTIP_STRAIGHTEN;<b>Straighten</b> / <b>fine rotation</b>.\nShortcut: <b>s</b>\n\nIndicate the vertical or horizontal by drawing a guide line over the image preview. Angle of rotation will be shown next to the guide line. Centre of rotation is the geometrical centre of the image.
 TP_BWMIX_CC_ENABLED;Adjust complementary colour
 TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colours in ROYGCBPM mode.
@@ -87,7 +87,6 @@ TP_DIRPYRDENOISE_MAIN_COLORSPACE;Colour space
 TP_DIRPYREQUALIZER_ALGO;Skin Colour Range
 TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colours of the skin, minimizing the action on other colours\nLarge: avoid more artifacts.
 TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colours (hue, chroma, luma) and the rest of the image.
-TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colourfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
 TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to colour cast.
 TP_GRADIENT_CENTER;Centre

rtdata/languages/English (US)

@@ -1310,7 +1310,7 @@
 !THRESHOLDSELECTOR_T;Top
 !THRESHOLDSELECTOR_TL;Top-left
 !THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TOOLBAR_TOOLTIP_CROP;<b>Crop</b> selection.\nShortcut: <b>c</b>\nMove the crop using <b>Shift</b>+<b>mouse drag</b>.
 !TOOLBAR_TOOLTIP_HAND;Hand tool.\nShortcut: <b>h</b>
 !TOOLBAR_TOOLTIP_STRAIGHTEN;<b>Straighten</b> / <b>fine rotation</b>.\nShortcut: <b>s</b>\n\nIndicate the vertical or horizontal by drawing a guide line over the image preview. Angle of rotation will be shown next to the guide line. Center of rotation is the geometrical center of the image.
@@ -1626,7 +1626,6 @@
 !TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
 !TP_EPD_SCALE;Scale
 !TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_AUTOLEVELS;Auto Levels
 !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 !TP_EXPOSURE_BLACKLEVEL;Black

rtdata/languages/Espanol

@@ -1749,7 +1749,6 @@ TP_EPD_LABEL;Mapeo tonal
 TP_EPD_REWEIGHTINGITERATES;Iteraciones de reponderación
 TP_EPD_SCALE;Escala
 TP_EPD_STRENGTH;Intensidad
-TP_EPD_TOOLTIP;El mapeo tonal puede hacerse en modo Lab (estándar) y en modo CIECAM02.\n\nPara activar mapeo tonal modo CIECAM02 haga los siguientes ajustes:\n1. CIECAM02\n2. Algoritmo="Brillo + Colorido (QM)"\n3. "Mapeo tonal usando Brillo CIECAM02 (Q)"
 TP_EXPOSURE_AUTOLEVELS;Niveles automáticos
 TP_EXPOSURE_AUTOLEVELS_TIP;Ejecuta Niveles Automáticos. Establece automáticamente los valores de los parámetros basándose en el análisis de la imagen.\nHabilita la reconstrucción de luces altas si es necesario
 TP_EXPOSURE_BLACKLEVEL;Nivel de Negro

rtdata/languages/Euskara

@@ -1411,7 +1411,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
 !THRESHOLDSELECTOR_T;Top
 !THRESHOLDSELECTOR_TL;Top-left
 !THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_LI;Linear
 !TP_BWMIX_ALGO_SP;Special effects
@@ -1700,7 +1700,6 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
 !TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
 !TP_EPD_SCALE;Scale
 !TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 !TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
 !TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.

rtdata/languages/Francais

@@ -1632,7 +1632,6 @@ TP_EPD_LABEL;Compression tonale
 TP_EPD_REWEIGHTINGITERATES;Itérations de la pondération
 TP_EPD_SCALE;Échelle
 TP_EPD_STRENGTH;Force
-TP_EPD_TOOLTIP;Vous pouvez choisir entre le mode Lab (standard) ou le mode CIECAM02.\n En activant "Compression tonale avec brillance Q CIECAM" dans le menu "Brillance + Niveau de couleur CIECAM"
 TP_EXPOSURE_AUTOLEVELS;Niveaux Auto
 TP_EXPOSURE_AUTOLEVELS_TIP;Bascule l'usage de Niveaux automatiques afin de régler automatiquement les valeurs basé sur l'analyse de l'image\nActive la Reconstruction des Hautes Lumières si nécessaire.
 TP_EXPOSURE_BLACKLEVEL;Noir

rtdata/languages/Greek

@@ -1410,7 +1410,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
 !THRESHOLDSELECTOR_T;Top
 !THRESHOLDSELECTOR_TL;Top-left
 !THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>Ctrl</b>+<b>Shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b> outside any picker.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_LI;Linear
 !TP_BWMIX_ALGO_SP;Special effects
@@ -1699,7 +1699,6 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
 !TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
 !TP_EPD_SCALE;Scale
 !TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
 !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 !TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
 !TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.