Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
98 lines (82 sloc) 2.28 KB
/*
* Copyright (C) 2013 CircuitCo
*
* Virtual cape for SPI1 on connector pins P9.29 P9.31 P9.30 P9.28
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/board/am335x-bbw-bbb-base.h>
#include <dt-bindings/pinctrl/am33xx.h>
/ {
compatible = "ti,beaglebone", "ti,beaglebone-black", "ti,beaglebone-green";
/* identification */
part-number = "BB-SPIDEV1";
version = "00A0";
/* state the resources this cape uses */
exclusive-use =
/* the pin header uses */
"P9.31", /* spi1_sclk */
"P9.29", /* spi1_d0 */
"P9.30", /* spi1_d1 */
"P9.28", /* spi1_cs0 */
// "P9.42", /* spi1_cs1 */
/* the hardware ip uses */
"spi1";
/*
* Free up the pins used by the cape from the pinmux helpers.
*/
fragment@0 {
target = <&ocp>;
__overlay__ {
P9_28_pinmux { status = "disabled"; }; /* spi1_cs0 */
P9_30_pinmux { status = "disabled"; }; /* spi1_d1 */
P9_29_pinmux { status = "disabled"; }; /* spi1_d0 */
P9_31_pinmux { status = "disabled"; }; /* spi1_sclk */
};
};
fragment@1 {
target = <&am33xx_pinmux>;
__overlay__ {
/* default state has all gpios released and mode set to uart1 */
bb_spi1_pins: pinmux_bb_spi1_pins {
pinctrl-single,pins = <
0x190 0x33 /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */
0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
// 0x164 0x12 /* eCAP0_in_PWM0_out.spi1_cs1 OUTPUT_PULLUP | MODE2 */
>;
};
};
};
fragment@2 {
target = <&spi1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&bb_spi1_pins>;
ti,pio-mode; /* disable dma when used as an overlay, dma gets stuck at 160 bits... */
channel@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spidev";
reg = <0>;
spi-max-frequency = <16000000>;
spi-cpha;
};
channel@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spidev";
reg = <1>;
spi-max-frequency = <16000000>;
};
};
};
};
You can’t perform that action at this time.