Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
736 lines (496 sloc) 52.4 KB

Microblink

Build Status Pod Version

BlinkID SDK for ID scanning

BlinkID SDK is a delightful component for quick and easy scanning of ID cards, passports and drivers licenses. The SDK is powered with Microblink's industry-proven and world leading OCR and barcode scanning technology, and offers:

  • integrated camera management
  • layered API, allowing everything from simple integration to complex UX customizations.
  • lightweight and no internet connection required
  • enteprise-level security standards
  • data parsing from ID barcode standards

BlinkID is a part of family of SDKs developed by Microblink for optical text recognition, barcode scanning, ID document scanning and many others.

BlinkID SDK

Table of contents

Requirements

SDK package contains Microblink framework and one or more sample apps which demonstrate framework integration. The framework can be deployed in iOS 8.0 or later, iPhone 4S or newer and iPad 2 or newer.

SDK performs significantly better when the images obtained from the camera are focused. Because of that, the SDK can have lower performance on iPad 2 and iPod Touch 4th gen devices, which don't have camera with autofocus.

Quick Start

Getting started with BlinkID SDK

This Quick Start guide will get you up and performing OCR scanning as quickly as possible. All steps described in this guide are required for the integration.

This guide sets up basic Raw OCR parsing and price parsing at the same time. It closely follows the BlinkOCR-sample app. We highly recommend you try to run the sample app. The sample app should compile and run on your device, and in the iOS Simulator.

The source code of the sample app can be used as the reference during the integration.

1. Initial integration steps

Using CocoaPods

  • If you wish to use version v1.2.0 or above, you need to install Git Large File Storage by running these comamnds:
brew install git-lfs
git lfs install
  • Be sure to restart your console after installing Git LFS

  • Note: if you already did try adding SDK using cocoapods and it's not working, first install the git-lfs and then clear you cocoapods cache. This should be sufficient to force cocoapods to clone BlinkID SDK, if it still doesn't work, try deinitializing your pods and installing them again.

  • Project dependencies to be managed by CocoaPods are specified in a file called Podfile. Create this file in the same directory as your Xcode project (.xcodeproj) file.

  • If you don't have podfile initialized run the following in your project directory.

pod init
  • Copy and paste the following lines into the TextEdit window:
platform :ios, '8.0'
target 'Your-App-Name' do
    pod 'PPBlinkID', '~> 5.1.0'
end
  • Install the dependencies in your project:
$ pod install
  • From now on, be sure to always open the generated Xcode workspace (.xcworkspace) instead of the project file when building your project:
open <YourProjectName>.xcworkspace

Integration without CocoaPods

-Download latest release (Download .zip or .tar.gz file starting with BlinkID. DO NOT download Source Code as GitHub does not fully support Git LFS)

OR

Clone this git repository:

  • If you wish to clone version v1.4.0 or above, you need to install Git Large File Storage by running these comamnds:
brew install git-lfs
git lfs install
  • Be sure to restart your console after installing Git LFS

  • To clone, run the following shell command:

git clone git@github.com:BlinkID/blinkid-ios.git
  • Copy Microblink.framework and Microblink.bundle to your project folder.

  • In your Xcode project, open the Project navigator. Drag the Microblink.framework and Microblink.bundle files to your project, ideally in the Frameworks group, together with other frameworks you're using. When asked, choose "Create groups", instead of the "Create folder references" option.

Adding Microblink.embedded framework to your project

  • Since Microblink.framework is a dynamic framework, you also need to add it to embedded binaries section in General settings of your target and choose option Embed & Sign.

Adding Microblink.framework to embedded binaries)

  • Include the additional frameworks and libraries into your project in the "Linked frameworks and libraries" section of your target settings.

    • AudioToolbox.framework
    • AVFoundation.framework
    • CoreMedia.framework
    • libc++.tbd
    • libiconv.tbd
    • libz.tbd

Adding Apple frameworks to your project

2. Referencing header file

In files in which you want to use scanning functionality place import directive.

Swift

import Microblink

Objective-C

#import <Microblink/Microblink.h>

3. Initiating the scanning process

To initiate the scanning process, first decide where in your app you want to add scanning functionality. Usually, users of the scanning library have a button which, when tapped, starts the scanning process. Initialization code is then placed in touch handler for that button. Here we're listing the initialization code as it looks in a touch handler method.

Also, for initialization purposes, the ViewController which initiates the scan have private properties for MBRawParser, MBParserGroupProcessor and MBBlinkInputRecognizer, so we know how to obtain result.

Swift

class ViewController: UIViewController, MBBlinkIdOverlayViewControllerDelegate  {
    
    var blinkIdRecognizer : MBBlinkIdRecognizer?

    override func viewDidLoad() {
        super.viewDidLoad()
    }

    @IBAction func didTapScan(_ sender: AnyObject) {
        
        /** Create BlinkID recognizer */
        self.blinkIdRecognizer = MBBlinkIdRecognizer()
        
        /** Create BlinkID settings */
        let settings : MBBlinkIdOverlaySettings = MBBlinkIdOverlaySettings()
        
        /** Crate recognizer collection */
        let recognizerList = [self.blinkIdRecognizer!]
        let recognizerCollection : MBRecognizerCollection = MBRecognizerCollection(recognizers: recognizerList)
        
        /** Create your overlay view controller */
        let blinkIdOverlayViewController : MBBlinkIdOverlayViewController = MBBlinkIdOverlayViewController(settings: settings, recognizerCollection: recognizerCollection, delegate: self)
        
        /** Create recognizer view controller with wanted overlay view controller */
        let recognizerRunneViewController : UIViewController = MBViewControllerFactory.recognizerRunnerViewController(withOverlayViewController: blinkIdOverlayViewController)
        
        /** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
        self.present(recognizerRunneViewController, animated: true, completion: nil)
    }
}

Objective-C

@interface ViewController () <MBBlinkIdOverlayViewControllerDelegate>

@property (nonatomic, strong) MBBlinkIdRecognizer *blinkIdRecognizer;

@end

@implementation ViewController

- (void)viewDidLoad {
    [super viewDidLoad];
}


- (IBAction)didTapScan:(id)sender {

    /** Create BlinkID recognizer */
    self.blinkIdRecognizer = [[MBBlinkIdRecognizer alloc] init];
    
     /** Create BlinkID settings */
    MBBlinkIdOverlaySettings* settings = [[MBBlinkIdOverlaySettings alloc] init];

    /** Create recognizer collection */
    MBRecognizerCollection *recognizerCollection = [[MBRecognizerCollection alloc] initWithRecognizers:@[self.blinkIdRecognizer]];
    
    /** Create your overlay view controller */
    MBBlinkIdOverlayViewController *blinkIdOverlayViewController = [[MBBlinkIdOverlayViewController alloc] initWithSettings:settings recognizerCollection:recognizerCollection delegate:self];

    /** Create recognizer view controller with wanted overlay view controller */
    UIViewController<MBRecognizerRunnerViewController>* recognizerRunnerViewController = [MBViewControllerFactory recognizerRunnerViewControllerWithOverlayViewController:blinkIdOverlayViewController];
    
    /** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
    [self presentViewController:recognizerRunnerViewController animated:YES completion:nil];

}

@end

4. License key

A valid license key is required to initalize scanning. You can generate a free demo license key, after you register, at Microblink developer dashboard.

You can include the license key in your app by passing a string or a file with license key. Note that you need to set the license key before intializing scanning. Ideally in AppDelegate or viewDidLoad before initializing any recognizers.

License key as string

You can pass the license key as a string, the following way:

Swift

MBMicroblinkSDK.sharedInstance().setLicenseKey("LICENSE-KEY")

Objective-C

[[MBMicroblinkSDK sharedInstance] setLicenseKey:@"LICENSE-KEY"];

License key as file

Or you can include the license key, with the code below. Please make sure that the file that contains the license key is included in your project and is copied during Copy Bundle Resources build phase.

Swift

MBMicroblinkSDK.sharedInstance().setLicenseResource("license-key-file", withExtension: "txt", inSubdirectory: "directory-to-license-key", for: Bundle.main)

Objective-C

[[MBMicroblinkSDK sharedInstance] setLicenseResource:@"license-key-file" withExtension:@"txt" inSubdirectory:@"" forBundle:[NSBundle mainBundle]];

5. Registering for scanning events

In the previous step, you instantiated MBDocumentOverlayViewController object with a delegate object. This object gets notified on certain events in scanning lifecycle. In this example we set it to self. The protocol which the delegate has to implement is MBDocumentOverlayViewControllerDelegate protocol. It is necessary to conform to that protocol. We will discuss more about protocols in Advanced integration section. You can use the following default implementation of the protocol to get you started.

Swift

func blinkIdOverlayViewControllerDidFinishScanning(_ blinkIdOverlayViewController: MBBlinkIdOverlayViewController, state: MBRecognizerResultState) {

    // this is done on background thread
    // check for valid state
    if state == .valid {

        // first, pause scanning until we process all the results
        blinkIdOverlayViewController.recognizerRunnerViewController?.pauseScanning()

        DispatchQueue.main.async(execute: {() -> Void in
            // All UI interaction needs to be done on main thread
        })
    }
}

func blinkIdOverlayViewControllerDidTapClose(_ blinkIdOverlayViewController: MBBlinkIdOverlayViewController) {
    // Your action on cancel 
}

Objective-C

- (void)blinkIdOverlayViewControllerDidFinishScanning:(MBBlinkIdOverlayViewController *)blinkIdOverlayViewController state:(MBRecognizerResultState)state {
    
    // this is done on background thread
    // check for valid state
    if (state == MBRecognizerResultStateValid) {
        
        // first, pause scanning until we process all the results
        [blinkIdOverlayViewController.recognizerRunnerViewController pauseScanning];
        
        dispatch_async(dispatch_get_main_queue(), ^{
            // All UI interaction needs to be done on main thread
        });
    }
}

- (void)blinkIdOverlayViewControllerDidTapClose:(nonnull MBBlinkIdOverlayViewController *)blinkIdOverlayViewController {
    // Your action on cancel 
}

Advanced BlinkID integration instructions

This section covers more advanced details of BlinkInput integration.

  1. First part will cover the possible customizations when using UI provided by the SDK.
  2. Second part will describe how to embed MBRecognizerRunnerViewController's delegates into your UIViewController with the goal of creating a custom UI for scanning, while still using camera management capabilites of the SDK.
  3. Third part will describe how to use the MBRecognizerRunner (Direct API) for recognition directly from UIImage without the need of camera or to recognize camera frames that are obtained by custom camera management.
  4. Fourth part will describe recognizer concept and available recognizers.

Built-in overlay view controllers and overlay subviews

Within BlinkID SDK there are several built-in overlay view controllers and scanning subview overlays that you can use to perform scanning.

Using MBDocumentOverlayViewController

MBDocumentOverlayViewController is overlay view controller best suited for performing scanning of various document cards. It has MBDocumentOverlayViewControllerDelegate delegate which can be used out-of-the-box to perform scanning using the default UI. Here is an example how to use and initialize MBDocumentOverlayViewController:

Swift

/** Create your overlay view controller */
let documentOverlayViewController : MBDocumentOverlayViewController = MBDocumentOverlayViewController(settings: documentSettings, recognizerCollection: recognizerCollection, delegate: self)

/** Create recognizer view controller with wanted overlay view controller */
let recognizerRunneViewController : UIViewController = MBViewControllerFactory.recognizerRunnerViewController(withOverlayViewController: documentOverlayViewController)

/** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
self.present(recognizerRunneViewController, animated: true, completion: nil)

Objective-C

MBDocumentOverlayViewController *overlayVC = [[MBDocumentOverlayViewController alloc] initWithSettings:settings recognizerCollection: recognizerCollection delegate:self];
UIViewController<MBRecognizerRunnerViewController>* recognizerRunnerViewController = [MBViewControllerFactory recognizerRunnerViewControllerWithOverlayViewController:overlayVC];

/** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
[self presentViewController:recognizerRunnerViewController animated:YES completion:nil];

As you can see, when initializing MBDocumentOverlayViewController, we are sending delegate property as self. To get results, we need to conform to MBDocumentOverlayViewControllerDelegate protocol.

Using MBDocumentVerificationOverlayViewController

MBDocumentVerificationOverlayViewController is overlay view controller best suited for performing scanning of various document for both front and back side. It has MBDocumentVerificationOverlayViewControllerDelegate delegate which can be used out-of-the-box to perform scanning using the default UI. Here is an example how to use and initialize MBDocumentVerificationOverlayViewController:

Swift

/** Create your overlay view controller */
let documentOverlayViewController : MBDocumentVerificationOverlayViewController = MBDocumentVerificationOverlayViewController(settings: documentVerificationSettings, recognizerCollection: recognizerCollection, delegate: self)

/** Create recognizer view controller with wanted overlay view controller */
let recognizerRunneViewController : UIViewController = MBViewControllerFactory.recognizerRunnerViewController(withOverlayViewController: documentOverlayViewController)

/** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
self.present(recognizerRunneViewController, animated: true, completion: nil)

Objective-C

MBDocumentVerificationOverlayViewController *overlayVC = [[MBDocumentVerificationOverlayViewController alloc] initWithSettings:settings recognizerCollection: recognizerCollection delegate:self];
UIViewController<MBRecognizerRunnerViewController>* recognizerRunnerViewController = [MBViewControllerFactory recognizerRunnerViewControllerWithOverlayViewController:overlayVC];

/** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
[self presentViewController:recognizerRunnerViewController animated:YES completion:nil];

As you can see, when initializing MBDocumentVerificationOverlayViewController, we are sending delegate property as self. To get results, we need to conform to MBDocumentVerificationOverlayViewControllerDelegate protocol.

New: Using MBBlinkIdOverlayViewController

MBBlinkIdOverlayViewController implements new UI for scanning identity documents, which is optimally designed to be used with new MBBlinkIdRecognizer and MBBlinkIdCombinedRecognizer. The new MBBlinkIdOverlayViewController implements several new features:

  • clear indication for searching phase, when BlinkID is searching for an ID document
  • clear progress indication, when BlinkID is busy with OCR and data extraction
  • clear message when the document is not supported
  • visual indications when the user needs to place the document closer to the camera
  • when MBBlinkIdCombinedRecognizer is used, visual indication that the data from the front side of the document doesn't match the data on the back side of the document.

The new UI allows the user to scan the document at an any angle, in any orientation. We recommend forcing landscape orientation if you scan barcodes on the back side, because in that orientation success rate will be higher. To force the UI in landscape mode, use the following instructions:

Swift

let settings = MBBlinkIdOverlaySettings()
settings.autorotateOverlay = true
settings.supportedOrientations = UIInterfaceOrientationMask.landscape

Objective-C

MBBlinkIdOverlaySettings *settings = [[MBBlinkIdOverlaySettings alloc] init];
settings.autorotateOverlay = YES;
settings.supportedOrientations = UIInterfaceOrientationMaskLandscape;

It has MBBlinkIdOverlayViewControllerDelegate delegate which can be used out-of-the-box to perform scanning using the default UI. Here is an example how to use and initialize MBBlinkIdOverlayViewController:

Swift

/** Create your overlay view controller */
let blinkIdOverlayViewController : MBBlinkIdOverlayViewController = MBBlinkIdOverlayViewController(settings: blinkIdSettings, recognizerCollection: recognizerCollection, delegate: self)

/** Create recognizer view controller with wanted overlay view controller */
let recognizerRunneViewController : UIViewController = MBViewControllerFactory.recognizerRunnerViewController(withOverlayViewController: blinkIdOverlayViewController)

/** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
self.present(recognizerRunneViewController, animated: true, completion: nil)

Objective-C

MBBlinkIdOverlayViewController *overlayVC = [[MBBlinkIdOverlayViewController alloc] initWithSettings:settings recognizerCollection: recognizerCollection delegate:self];
UIViewController<MBRecognizerRunnerViewController>* recognizerRunnerViewController = [MBViewControllerFactory recognizerRunnerViewControllerWithOverlayViewController:overlayVC];

/** Present the recognizer runner view controller. You can use other presentation methods as well (instead of presentViewController) */
[self presentViewController:recognizerRunnerViewController animated:YES completion:nil];

As you can see, when initializing MBBlinkIdOverlayViewController, we are sending delegate property as self. To get results, we need to conform to MBBlinkIdOverlayViewControllerDelegate protocol.

Custom overlay view controller

Please check our Samples for custom implementation of overlay view controller.

Overlay View Controller is an abstract class for all overlay views.

It's responsibility is to provide meaningful and useful interface for the user to interact with.

Typical actions which need to be allowed to the user are:

  • intuitive and meaniningful way to guide the user through scanning process. This is usually done by presenting a "viewfinder" in which the user need to place the scanned object
  • a way to cancel the scanning, typically with a "cancel" or "back" button
  • a way to power on and off the light (i.e. "torch") button

BlinkID SDK always provides it's own default implementation of the Overlay View Controller for every specific use. Your implementation should closely mimic the default implementation as it's the result of thorough testing with end users. Also, it closely matches the underlying scanning technology.

For example, the scanning technology usually gives results very fast after the user places the device's camera in the expected way above the scanned object. This means a progress bar for the scan is not particularly useful to the user. The majority of time the user spends on positioning the device's camera correctly. That's just an example which demonstrates careful decision making behind default camera overlay view.

1. Initialization

To use your custom overlay with Microblink's camera view, you must first subclass MBCustomOverlayViewController and implement the overlay behaviour conforming wanted protocols.

2. Protocols

There are five MBRecognizerRunnerViewController protocols and one overlay protocol MBOverlayViewControllerInterface.

Five RecognizerRunnerView protocols are:

In viewDidLoad, other protocol conformation can be done and it's done on recognizerRunnerViewController property of MBOverlayViewController, for example:

Swift and Objective-C

self.scanningRecognizerRunnerViewControllerDelegate = self;

3. Overlay subviews

The SDK contains various subviews you can use to notify users of the state of scanning. If you want to use built-in implementation we recommend to use MBModernViewfinderSubview. In can be initialized in viewDidLoad method:

Swift

viewfinderSubview = MBModernViewfinderSubview()
viewfinderSubview.frame = view.frame
viewfinderSubview.moveable = true
view.addSubview(viewfinderSubview)

Objective-C

self.viewfinderSubview = [[MBModernViewfinderSubview alloc] init];
self.viewfinderSubview.frame = self.view.frame;
self.viewfinderSubview.delegate = self.overlaySubviewsDelegate;
self.viewfinderSubview.moveable = YES;
[self.view addSubview:self.viewfinderSubview];

To use this subview you'll need to implement MBDetectionRecognizerRunnerViewControllerDelegate(http://blinkid.github.io/blinkid-ios/Protocols/MBDetectionRecognizerRunnerViewControllerDelegate.html) then in the -recognizerRunnerViewController:didFinishDetectionWithDisplayableQuad: notify subview of detection changes.

Swift

func recognizerRunnerViewController(_ recognizerRunnerViewController: Any!, didFinishDetectionWithDisplayableQuad displayableQuad: MBDisplayableQuadDetection) {
    viewfinderSubview.detectionFinished(withDisplayableQuad: displayableQuad)
}

Objective-C

- (void)recognizerRunnerViewController: (nonnull UIViewController<MBRecognizerRunnerViewController> *) recognizerRunnerViewController didFinishDetectionWithDisplayableQuad: (nonnull MBDisplayableQuadDetection *)displayableQuad {
    [self.viewfinderSubview detectionFinishedWithDisplayableQuad:displayableQuad];
}

4. Initialization

In Quick Start guide it is shown how to use a default overlay view controller. You can now swap default view controller with your implementation of CustomOverlayViewController

Swift

let recognizerRunnerViewController : UIViewController = MBViewControllerFactory.recognizerRunnerViewController(withOverlayViewController: CustomOverlayViewController)

Objective-C

UIViewController<MBRecognizerRunnerViewController>* recognizerRunnerViewController = [MBViewControllerFactory recognizerRunnerViewControllerWithOverlayViewController:CustomOverlayViewController];

MBRecognizer and available recognizers

The MBRecognizer concept

The MBRecognizer is the basic unit of processing within the SDK. Its main purpose is to process the image and extract meaningful information from it. As you will see later, the SDK has lots of different MBRecognizer objects that have various purposes.

Each MBRecognizer has a MBRecognizerResult object, which contains the data that was extracted from the image. The MBRecognizerResult object is a member of corresponding MBRecognizer object its lifetime is bound to the lifetime of its parent MBRecognizer object. If you need your MBRecognizerRecognizer object to outlive its parent MBRecognizer object, you must make a copy of it by calling its method copy.

While MBRecognizer object works, it changes its internal state and its result. The MBRecognizer object's MBRecognizerResult always starts in Empty state. When corresponding MBRecognizer object performs the recognition of given image, its MBRecognizerResult can either stay in Empty state (in case MBRecognizerfailed to perform recognition), move to Uncertain state (in case MBRecognizer performed the recognition, but not all mandatory information was extracted) or move to Valid state (in case MBRecognizer performed recognition and all mandatory information was successfully extracted from the image).

As soon as one MBRecognizer object's MBRecognizerResult within MBRecognizerCollection given to MBRecognizerRunner or MBRecognizerRunnerViewController changes to Valid state, the onScanningFinished callback will be invoked on same thread that performs the background processing and you will have the opportunity to inspect each of your MBRecognizer objects' MBRecognizerResult to see which one has moved to Valid state.

As soon as onScanningFinished method ends, the MBRecognizerRunnerViewController will continue processing new camera frames with same MBRecognizer objects, unless paused. Continuation of processing or reset recognition will modify or reset all MBRecognizer objects's MBRecognizerResult. When using built-in activities, as soon as onScanningFinished is invoked, built-in activity pauses the MBRecognizerRunnerViewController and starts finishing the activity, while saving the MBRecognizerCollection with active MBRecognizer.

MBRecognizerCollection concept

The MBRecognizerCollection is is wrapper around MBRecognizer objects that has array of MBRecognizer objects that can be used to give MBRecognizer objects to MBRecognizerRunner or MBRecognizerRunnerViewController for processing.

The MBRecognizerCollection is always constructed with array [[MBRecognizerCollection alloc] initWithRecognizers:recognizers] of MBRecognizer objects that need to be prepared for recognition (i.e. their properties must be tweaked already).

The MBRecognizerCollection manages a chain of MBRecognizer objects within the recognition process. When a new image arrives, it is processed by the first MBRecognizer in chain, then by the second and so on, iterating until a MBRecognizer object's MBRecognizerResult changes its state to Valid or all of the MBRecognizer objects in chain were invoked (none getting a Valid result state).

You cannot change the order of the MBRecognizer objects within the chain - no matter the order in which you give MBRecognizer objects to MBRecognizerCollection, they are internally ordered in a way that provides best possible performance and accuracy. Also, in order for SDK to be able to order MBRecognizer objects in recognition chain in a best way possible, it is not allowed to have multiple instances of MBRecognizer objects of the same type within the chain. Attempting to do so will crash your application.

List of available recognizers

This section will give a list of all MBRecognizer objects that are available within BlinkID SDK, their purpose and recommendations how they should be used to get best performance and user experience.

Frame Grabber Recognizer

The MBFrameGrabberRecognizer is the simplest recognizer in SDK, as it does not perform any processing on the given image, instead it just returns that image back to its onFrameAvailable. Its result never changes state from empty.

This recognizer is best for easy capturing of camera frames with MBRecognizerRunnerViewController. Note that MBImage sent to onFrameAvailable are temporary and their internal buffers all valid only until the onFrameAvailable method is executing - as soon as method ends, all internal buffers of MBImage object are disposed. If you need to store MBImage object for later use, you must create a copy of it by calling copy.

Success Frame Grabber Recognizer

The MBSuccessFrameGrabberRecognizer is a special MBecognizer that wraps some other MBRecognizer and impersonates it while processing the image. However, when the MBRecognizer being impersonated changes its MBRecognizerResult into Valid state, the MBSuccessFrameGrabberRecognizer captures the image and saves it into its own MBSuccessFrameGrabberRecognizerResult object.

Since MBSuccessFrameGrabberRecognizer impersonates its slave MBRecognizer object, it is not possible to give both concrete MBRecognizer object and MBSuccessFrameGrabberRecognizer that wraps it to same MBRecognizerCollection - doing so will have the same result as if you have given two instances of same MBRecognizer type to the MBRecognizerCollection - it will crash your application.

This recognizer is best for use cases when you need to capture the exact image that was being processed by some other MBRecognizer object at the time its MBRecognizerResult became Valid. When that happens, MBSuccessFrameGrabberRecognizer's MBSuccessFrameGrabberRecognizerResult will also become Valid and will contain described image.

BlinkID recognizers

Unless stated otherwise for concrete recognizer, single side BlinkID recognizes from this list can be used in any context, but they work best with the MBDocumentOverlayViewController, which has UI best suited for document scanning.

Combined recognizers should be used with MBDocumentVerificationOverlayViewController which manages scanning of multiple document sides in the single camera opening and guides the user through the scanning process. Some combined recognizers support scanning of multiple document types, but only one document type can be scanned at a time.

Machine Readable Travel Document recognizer

The MBMrtdRecognizer is used for scanning and data extraction from the Machine Readable Zone (MRZ) of the various Machine Readable Travel Documents (MRTDs) like ID cards and passports. This recognizer is not bound to the specific country, but it can be configured to only return data that match some criteria defined by the MrzFilter.

You can find information about usage context at the beginning of this section.

Machine Readable Travel Document combined recognizer

The MBMrtdCombinedRecognizer scans Machine Readable Zone (MRZ) after scanning the full document image and face image (usually MRZ is on the back side and face image is on the front side of the document). Internally, it uses MBDocumentFaceRecognizer for obtaining full document image and face image as the first step and then MBMrtdRecognizer for scanning the MRZ.

You can find information about usage context at the beginning of this section.

Passport recognizer

The MBPassportRecognizer is used for scanning and data extraction from the Machine Readable Zone (MRZ) of the various passport documents. This recognizer also returns face image from the passport.

You can find information about usage context at the beginning of this section.

Visa recognizer

The MBVisaRecognizer is used for scanning and data extraction from the Machine Readable Zone (MRZ) of the various visa documents. This recognizer also returns face image from the visa document.

You can find information about usage context at the beginning of this section.

US / Canada driver's license barcode recognizer

The MBUsdlRecognizer is used for scanning PDF417 barcode from the US / Canada driver's license.

You can find information about usage context at the beginning of this section.

US / Canada driver's license combined recognizer

The MBUsdlCombinedRecognizer scans PDF417 barcode from the back side of US / Canada driver's license after scanning the full document image and face image from the front side. Internally, it uses MBDocumentFaceRecognizer for obtaining full document image and face image as the first step and then MBUsdlRecognizer for scanning the PDF417 barcode.

You can find information about usage context at the beginning of this section.

Document face recognizer

The MBDocumentFaceRecognizer is a special type of recognizer that only returns face image and full document image of the scanned document. It does not extract document fields like first name, last name, etc. This generic recognizer can be used to obtain document images in cases when specific support for some document type is not available.

You can find information about usage context at the beginning of this section.

BlinkID Recognizer

The MBBlinkIdRecognizer scans and extracts data from the front side of supported document. You can find the list of the currently supported documents here. We will continue expanding this recognizer by adding support for new document types in the future. Star this repo to stay updated.

BlinkID Combined Recognizer

Use MBBlinkIdCombinedRecognizer for scanning both sides of the supported document. First, it scans and extracts data from the front, then scans and extracts data from the barcode on the back, and finally, combines results from both sides. The BlinkIDCombinedRecognizer also performs data matching and returns a flag if the extracted data captured from the front side matches the data from the barcode on the back. You can find the list of the currently supported documents here. We will continue expanding this recognizer by adding support for new document types in the future. Star this repo to stay updated.

Troubleshooting

Integration problems

In case of problems with integration of the SDK, first make sure that you have tried integrating it into XCode by following integration instructions.

If you have followed XCode integration instructions and are still having integration problems, please contact us at help.microblink.com.

SDK problems

In case of problems with using the SDK, you should do as follows:

Licencing problems

If you are getting "invalid licence key" error or having other licence-related problems (e.g. some feature is not enabled that should be or there is a watermark on top of camera), first check the console. All licence-related problems are logged to error log so it is easy to determine what went wrong.

When you have determine what is the licence-relate problem or you simply do not understand the log, you should contact us help.microblink.com. When contacting us, please make sure you provide following information:

  • exact Bundle ID of your app (from your info.plist file)
  • licence that is causing problems
  • please stress out that you are reporting problem related to iOS version of BlinkID SDK
  • if unsure about the problem, you should also provide excerpt from console containing licence error

Other problems

If you are having problems with scanning certain items, undesired behaviour on specific device(s), crashes inside BlinkID SDK or anything unmentioned, please do as follows:

  • Contact us at help.microblink.com describing your problem and provide following information:
    • log file obtained in previous step
    • high resolution scan/photo of the item that you are trying to scan
    • information about device that you are using
    • please stress out that you are reporting problem related to iOS version of BlinkID SDK

Frequently asked questions and known problems

Here is a list of frequently asked questions and solutions for them and also a list of known problems in the SDK and how to work around them.

In demo everything worked, but after switching to production license I get NSError with MBMicroblinkSDKRecognizerErrorDomain and MBRecognizerFailedToInitalize code as soon as I construct specific MBRecognizer object

Each license key contains information about which features are allowed to use and which are not. This NSError indicates that your production license does not allow using of specific MBRecognizer object. You should contact support to check if provided licence is OK and that it really contains all features that you have purchased.

I get NSError with MBMicroblinkSDKRecognizerErrorDomain and MBRecognizerFailedToInitalize code with trial license key

Whenever you construct any MBRecognizer object or, a check whether license allows using that object will be performed. If license is not set prior constructing that object, you will get NSError with MBMicroblinkSDKRecognizerErrorDomain and MBRecognizerFailedToInitalize code. We recommend setting license as early as possible in your app.

Undefined Symbols on Architecture armv7

Make sure you link your app with iconv and Accelerate frameworks as shown in Quick start. If you are using Cocoapods, please be sure that you've installed git-lfs prior to installing pods. If you are still getting this error, go to project folder and execute command git-lfs pull.

In my didFinish callback I have the result inside my MBRecognizer, but when scanning activity finishes, the result is gone

This usually happens when using MBRecognizerRunnerViewController and forgetting to pause the MBRecognizerRunnerViewController in your didFinish callback. Then, as soon as didFinish happens, the result is mutated or reset by additional processing that MBRecognizer performs in the time between end of your didFinish callback and actual finishing of the scanning activity. For more information about statefulness of the MBRecognizer objects, check this section.

Unsupported architectures when submitting app to App Store

Microblink.framework is a dynamic framework which contains slices for all architectures - device and simulator. If you intend to extract .ipa file for ad hoc distribution, you'll need to preprocess the framework to remove simulator architectures.

Ideal solution is to add a build phase after embed frameworks build phase, which strips unused slices from embedded frameworks.

Build step is based on the one provided here: http://ikennd.ac/blog/2015/02/stripping-unwanted-architectures-from-dynamic-libraries-in-xcode/

APP_PATH="${TARGET_BUILD_DIR}/${WRAPPER_NAME}"

# This script loops through the frameworks embedded in the application and
# removes unused architectures.
find "$APP_PATH" -name '*.framework' -type d | while read -r FRAMEWORK
do
FRAMEWORK_EXECUTABLE_NAME=$(defaults read "$FRAMEWORK/Info.plist" CFBundleExecutable)
FRAMEWORK_EXECUTABLE_PATH="$FRAMEWORK/$FRAMEWORK_EXECUTABLE_NAME"
echo "Executable is $FRAMEWORK_EXECUTABLE_PATH"

EXTRACTED_ARCHS=()

for ARCH in $ARCHS
do
echo "Extracting $ARCH from $FRAMEWORK_EXECUTABLE_NAME"
lipo -extract "$ARCH" "$FRAMEWORK_EXECUTABLE_PATH" -o "$FRAMEWORK_EXECUTABLE_PATH-$ARCH"
EXTRACTED_ARCHS+=("$FRAMEWORK_EXECUTABLE_PATH-$ARCH")
done

echo "Merging extracted architectures: ${ARCHS}"
lipo -o "$FRAMEWORK_EXECUTABLE_PATH-merged" -create "${EXTRACTED_ARCHS[@]}"
rm "${EXTRACTED_ARCHS[@]}"

echo "Replacing original executable with thinned version"
rm "$FRAMEWORK_EXECUTABLE_PATH"
mv "$FRAMEWORK_EXECUTABLE_PATH-merged" "$FRAMEWORK_EXECUTABLE_PATH"

done

Additional info

Complete API reference can be found here.

For any other questions, feel free to contact us at help.microblink.com.

You can’t perform that action at this time.