From f513a6f0758f421430834a45f3f64364c02a4e99 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:57:38 +0000 Subject: [PATCH 01/17] Dependency (transifex/language): Translate Strings.resx in ja_JP 100% translated source file: 'Strings.resx' on 'ja_JP'. --- .../Resources/Strings.ja-JP.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx index 2c4b83fb5a..e13fe47e81 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx @@ -3353,21 +3353,6 @@ URL: https://api.ipify.org and https://api6.ipify.org Pingの状態 - - ThreadPool 追加最小スレッド数 - - - この設定は、アプリケーションのスレッドプールからオンデマンドで作成されるスレッドの最小数を指定します。これにより、例えばIPスキャナーやポートスキャナーのパフォーマンスが向上します。 - -この値はデフォルトの最小スレッド数（CPUスレッド数）に追加されます。値が0の場合、デフォルト設定のままとなります。この値がThreadPoolのデフォルトの最大スレッド数よりも大きい場合は、この値が使用されます。 - -値が高すぎると、パフォーマンスの問題が発生する可能性があります。 - -この値の変更は、アプリケーションの再起動後に有効になります。値が正常に設定されたかどうかは、%LocalAppData%\NETworkManager\NETworkManager.log のログファイルで確認できます。 - - - これらの設定は、ホスト/ポートスキャンごとに同時に実行されるスレッドの最大数のみを変更します。アプリケーションのスレッド数（最小）を調整するには、「設定」>「一般」>「一般」に移動してください。 - ポートの状態 From 2bbff4d2bb9e34b19d245bfa6ec13959383f37b2 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:57:46 +0000 Subject: [PATCH 02/17] Dependency (transifex/language): Translate Strings.resx in sv_SE 62% of minimum 25% translated source file: 'Strings.resx' on 'sv_SE'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.sv-SE.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx index f68e3a0884..28d88db324 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx @@ -3350,21 +3350,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From 39a0ea68d2dd4b971f57c1b16040641034a24d88 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:57:53 +0000 Subject: [PATCH 03/17] Dependency (transifex/language): Translate Strings.resx in zh_TW 100% translated source file: 'Strings.resx' on 'zh_TW'. --- .../Resources/Strings.zh-TW.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx index 81942319c6..a7f914a9fd 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx @@ -3353,21 +3353,6 @@ Ping 狀態 - - 執行緒池額外最小執行緒數。 - - - 此設定指定應用程式 ThreadPool 在需要時所產生的最小執行緒數。對於 IP 掃描器或埠掃描器等功能，調整此值可提升效能。 - -此值會加到預設的「最小執行緒」上（即 CPU 執行緒數）。設為 0 時使用系統預設設定。若該值高於 ThreadPool 的預設最大執行緒，則以此值作為最大值。 - -過度調整可能會造成效能下降。 - -更改後需重新啟動程式才能生效；是否成功設定可在 %LocalAppData%\NETworkManager\NETworkManager.log 中查閱。 - - - 此設定僅調整每個主機／埠掃描時同時執行的最大執行緒數。請至 設定 > 一般 > 一般，調整應用程式的（最小）執行緒數。 - 連接埠狀態 From ef4d11a2ab795560facba5b8c4e753d532fa9794 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:01 +0000 Subject: [PATCH 04/17] Dependency (transifex/language): Translate Strings.resx in pl_PL 63% of minimum 25% translated source file: 'Strings.resx' on 'pl_PL'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.pl-PL.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx index d26b00bb39..3dd5e19df2 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx @@ -3350,21 +3350,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From 17e95873017cdaad94df15cb5524e3f5e6ef3433 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:09 +0000 Subject: [PATCH 05/17] Dependency (transifex/language): Translate Strings.resx in cs_CZ 61% of minimum 25% translated source file: 'Strings.resx' on 'cs_CZ'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.cs-CZ.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx index 2634774c7e..43d0dadbb3 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx @@ -3353,21 +3353,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From 8b65f539091140085e0b2d98e9b95cb1189d44ac Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:18 +0000 Subject: [PATCH 06/17] Dependency (transifex/language): Translate Strings.resx in lb 99% of minimum 25% translated source file: 'Strings.resx' on 'lb'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.lb-LU.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx index c0171882ce..72ed22d826 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx @@ -3353,21 +3353,6 @@ Wann d'Optioun erëm deaktivéiert gëtt, ginn d'Wäerter net méi geännert. D Ping-Status - - ThreadPool zousätzlech min. Threads - - - Dës Astellung leet d'Mindestzuel u Threads fest, déi bei Bedarf aus dem ThreadPool vun der Applikatioun erstallt ginn. Dat kann d'Leeschtung z. B. vum IP-Scanner oder Port-Scanner verbesseren. - -De Wäert gëtt zum Standardwäert min. Threads (Unzuel un CPU-Threads) bäigerechent. De Wäert 0 léisst d'Standardastellungen. Ass de Wäert méi héich wéi déi standardméisseg max. Threads vum ThreadPool, gëtt dëse Wäert benotzt. - -Wann de Wäert ze héich ass, kënne Leeschtungsproblemer optrieden. - -Ännerungen un dësem Wäert gi réischt no engem Neistart vun der Applikatioun wierksam. Ob de Wäert erfollegräich gesat gouf, kann an der Logdatei ënner %LocalAppData%\NETworkManager\NETworkManager.log gekuckt ginn - - - Dës Astellunge änneren nëmmen d'maximal Unzuel un gläichzäiteg ausgefouerten Threads pro Host-/Port-Scan. Gitt op Astellungen > Allgemeng > Allgemeng fir déi (minimal) Threads vun der Applikatioun unzepassen. - Port-Status From 83cbc17d054b276237b08c6cf1dadc80577d9b5c Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:28 +0000 Subject: [PATCH 07/17] Dependency (transifex/language): Translate Strings.resx in fr_FR 85% of minimum 25% translated source file: 'Strings.resx' on 'fr_FR'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.fr-FR.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx index dcdd807222..b8110cd635 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx @@ -3353,21 +3353,6 @@ If the option is disabled again, the values are no longer modified. However, the État du ping - - ThreadPool supplémentaire min. fils - - - Ce paramètre spécifie le nombre minimum de threads qui seront créés à la demande depuis ThreadPool de l'application. Cela peut améliorer les performances, par exemple, du scanner IP ou du scanner de port. - -La valeur est ajoutée au nombre minimum de threads par défaut (nombre de threads CPU). La valeur 0 laisse les paramètres par défaut. Si la valeur est supérieure au nombre maximum de threads par défaut du ThreadPool, cette valeur est utilisée. - -Si la valeur est trop élevée, des problèmes de performances peuvent survenir. - -Les modifications apportées à cette valeur prendront effet après le redémarrage de l'application. La définition réussie de la valeur peut être vérifiée dans le fichier journal sous %LocalAppData%\NETworkManager\NETworkManager.log - - - Ces paramètres modifient seulement le nombre maximal de threads exécutés simultanément par analyse d'hôte/port. Accédez à Paramètres > Général > Général pour ajuster les (min) threads de l’application. - État du port From b6c81498f4abd1a96a467627bcd9a551f480fb85 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:36 +0000 Subject: [PATCH 08/17] Dependency (transifex/language): Translate Strings.resx in de_DE 100% translated source file: 'Strings.resx' on 'de_DE'. --- .../Resources/Strings.de-DE.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx b/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx index abc1ba20bc..f44fc697da 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx @@ -3353,21 +3353,6 @@ Wenn die Option wieder deaktiviert wird, werden die Werte nicht mehr verändert. Ping-Status - - ThreadPool zusätzliche min. Threads - - - Diese Einstellung legt die Mindestanzahl von Threads fest, die bei Bedarf aus dem ThreadPool der Anwendung erstellt werden. Dies kann die Leistung z.B. des IP-Scanners oder Port-Scanners verbessern. - -Der Wert wird zum Standardwert min. Threads (Anzahl der CPU-Threads) addiert. Der Wert 0 belässt die Standardeinstellungen. Ist der Wert höher als die standardmäßige Anzahl der Threads des ThreadPools, wird dieser Wert verwendet. - -Wenn der Wert zu hoch ist, können Leistungsprobleme auftreten. - -Änderungen an diesem Wert werden erst nach einem Neustart der Anwendung wirksam. Ob der Wert erfolgreich gesetzt wurde, kann in der Protokolldatei unter %LocalAppData%\NETworkManager\NETworkManager.log eingesehen werden - - - Diese Einstellungen ändern nur die maximale Anzahl der gleichzeitig ausgeführten Threads pro Host-/Port-Scan. Gehen Sie zu Einstellungen > Allgemein > Allgemein, um die (minimalen) Threads der Anwendung anzupassen. - Port-Status From f73e3b75d2358b6c1cb7ccdce74072428884f609 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:45 +0000 Subject: [PATCH 09/17] Dependency (transifex/language): Translate Strings.resx in ru_RU 61% of minimum 25% translated source file: 'Strings.resx' on 'ru_RU'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.ru-RU.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx index a1a81bf212..85b0ff1527 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx @@ -3353,21 +3353,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From 8e0c1cea0b7b3aca0bc99108fcbbee7b2d639294 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:58:52 +0000 Subject: [PATCH 10/17] Dependency (transifex/language): Translate Strings.resx in hu_HU 61% of minimum 25% translated source file: 'Strings.resx' on 'hu_HU'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.hu-HU.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx index 07a6bea438..05916da5d5 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx @@ -3353,21 +3353,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From 1d96bb359cb790305e651f0aafe7bf652b508cfc Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:02 +0000 Subject: [PATCH 11/17] Dependency (transifex/language): Translate Strings.resx in pt_BR 100% translated source file: 'Strings.resx' on 'pt_BR'. --- .../Resources/Strings.pt-BR.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx b/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx index 93595700bf..6c37e6a05a 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx @@ -3353,21 +3353,6 @@ Se a opção for desabilitada novamente, os valores não serão mais modificados Status do ping - - Threads mínimos adicionais ThreadPool - - - Essa configuração especifica o número mínimo de threads que serão criados a partir do ThreadPool do aplicativo sob demanda. Isso pode melhorar o desempenho, por exemplo, do scanner IP ou do scanner de porta. - -O valor é adicionado ao threads mínimo padrão (número de threads da CPU). O valor 0 deixa as configurações padrão. Se o valor for maior que o padrão máximo de threads do ThreadPool, esse valor é usado. - -Se o valor for muito alto, podem ocorrer problemas de desempenho. - -As alterações nesse valor entrarão em vigor depois que o aplicativo for reiniciado. Se o valor foi definido com sucesso pode ser visto no arquivo de log em %LocalAppData%\NETworkManager\NETworkManager.log - - - Essas configurações alteram apenas o número máximo de threads executados simultaneamente por verificação de host/porta. Vá para Configurações > Geral > Geral para ajustar os threads (mín.) do aplicativo. - Status da porta From 067bb503addd2514a6c1d3b8353fff4d7ff0980c Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:09 +0000 Subject: [PATCH 12/17] Dependency (transifex/language): Translate Strings.resx in nl_NL 61% of minimum 25% translated source file: 'Strings.resx' on 'nl_NL'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.nl-NL.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx index 753ff3c947..302a1ee2e4 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx @@ -3350,21 +3350,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From fa26dc08e206dd025e853b4da8599165688e1330 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:18 +0000 Subject: [PATCH 13/17] Dependency (transifex/language): Translate Strings.resx in zh_CN 81% of minimum 25% translated source file: 'Strings.resx' on 'zh_CN'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.zh-CN.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx index 9502e363fa..ac614d97d1 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx @@ -3354,21 +3354,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping 状态 - - 线程池额外的最小线程数 - - - 该设置指定了根据需要从应用程序的线程池中创建的线程的最小数量。例如，这可以提高 IP 扫描仪或端口扫描程序的性能。 - -该值与默认的最小线程数（CPU 线程数）相加。值 0 则保留默认设置。如果该值高于 ThreadPool 的默认最大线程数，则使用该值。 - -如果该值过高，可能会出现性能问题。 - -对该值的更改将在重启应用程序后生效。该值是否设置成功，可在 %LocalAppData%\NETworkManager\NETworkManager.log 下的日志文件中查看。 - - - 这些设置只更改每个主机/端口扫描并发执行线程的最大数量。转到设置 > 常规 > 常规调整应用程序的（最小）线程数。 - 端口状态 From 2feaa1d0c79a009984448cb48f5add534ba9830d Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:27 +0000 Subject: [PATCH 14/17] Dependency (transifex/language): Translate Strings.resx in ko_KR 92% of minimum 25% translated source file: 'Strings.resx' on 'ko_KR'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.ko-KR.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx index 1e172c2e59..cc86bde47a 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx @@ -3350,21 +3350,6 @@ If the option is disabled again, the values are no longer modified. However, the 핑 상태 - - 스레드풀 추가 최소 스레드 - - - 이 설정은 요청 시 응용 프로그램의 스레드풀에서 생성될 최소 스레드 수를 지정합니다. 이렇게 하면 IP 스캐너나 포트 스캐너와 같은 성능이 향상될 수 있습니다. - -이 값은 기본 최소 스레드 (CPU 스레드 수)에 추가됩니다. 값 0은 기본 설정을 남깁니다. 이 값이 스레드풀의 기본 최대값보다 높으면 이 값이 사용됩니다. - -값이 너무 높으면 성능 문제가 발생할 수 있습니다. - -이 값의 변경 사항은 응용 프로그램이 재시작된 후에 적용됩니다. 값이 성공적으로 설정되었는지 여부는 로그 파일의 %LocalAppData%\\NETWORKManager\\NETWORKManager.log에서 확인할 수 있습니다 - - - 이 설정은 호스트/포트 스캔당 동시에 실행되는 스레드의 최대 수만 변경합니다. 응용 프로그램의 (최소) 스레드를 조정하려면 설정 > 일반 > 일반으로 이동합니다. - 포트 상태 From c030f57b41679636a814597e400686487f534b0d Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:37 +0000 Subject: [PATCH 15/17] Dependency (transifex/language): Translate Strings.resx in es_ES 64% of minimum 25% translated source file: 'Strings.resx' on 'es_ES'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.es-ES.resx | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx index b20a4eba30..29d474adf4 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx @@ -3350,21 +3350,6 @@ If the option is disabled again, the values are no longer modified. However, the Ping status - - ThreadPool additional min. threads - - - This setting specifies the minimum number of threads that will be created from the application's ThreadPool on demand. This can improve the performance for example of the IP scanner or port scanner. - -The value is added to the default min. threads (number of CPU threads). The value 0 leaves the default settings. If the value is higher than the default max. threads of the ThreadPool, this value is used. - -If the value is too high, performance problems may occur. - -Changes to this value will take effect after the application is restarted. Whether the value was set successfully can be seen in the log file under %LocalAppData%\NETworkManager\NETworkManager.log - - - These settings only change the maximum number of concurrently executed threads per host/port scan. Go to Settings > General > General to adjust the (min) threads of the application. - Port status From a15a039ead66bc2723234e4395e86f0dc573a901 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:47 +0000 Subject: [PATCH 16/17] Dependency (transifex/language): Translate Strings.resx in sl_SI 80% of minimum 25% translated source file: 'Strings.resx' on 'sl_SI'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --- .../Resources/Strings.sl-SI.resx | 9 --------- 1 file changed, 9 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx index 7d88076dfe..337cf83cea 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx @@ -3346,15 +3346,6 @@ If the option is disabled again, the values are no longer modified. However, the Stanje Pinga - - Dodatnih najm. niti ThreadPool - - - Ta nastavitev določa najmanjše število niti, ki bodo na zahtevo ustvarjene iz ThreadPoola aplikacije. To lahko izboljša delovanje na primer skenerja IP ali skenerja vrat. Vrednost se doda privzeti min. niti (število niti procesorja). Vrednost 0 pusti privzete nastavitve. Če je vrednost višja od privzete najv. niti ThreadPool, se uporabi ta vrednost. Če je vrednost previsoka, lahko pride do težav z delovanjem. Spremembe te vrednosti bodo uveljavljene po ponovnem zagonu aplikacije. Ali je bila vrednost uspešno nastavljena, lahko vidite v dnevniški datoteki pod %LocalAppData%\NETworkManager\NETworkManager.log - - - Te nastavitve spremenijo samo največje število sočasno izvedenih niti na skeniranje gostitelja/vrat. Pojdite v Nastavitve > Splošno > Splošno, da prilagodite (najm.) niti aplikacije. - Stanje vrat From 514c186f5a2e8324483a55a6baf059284572cf54 Mon Sep 17 00:00:00 2001 From: "transifex-integration[bot]" <43880903+transifex-integration[bot]@users.noreply.github.com> Date: Sat, 8 Aug 2026 21:59:55 +0000 Subject: [PATCH 17/17] Dependency (transifex/language): Translate Strings.resx in it_IT 100% translated source file: 'Strings.resx' on 'it_IT'. --- .../Resources/Strings.it-IT.resx | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx index 8b99389d63..dae7b85fe9 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx @@ -3380,23 +3380,6 @@ Se l'opzione viene nuovamente disabilitata, i valori non verranno più modificat Stato ping - - ThreadPool aggiuntivo min. thread - - - Questa impostazione specifica il numero minimo di thread che verranno creati dal ThreadPool dell'applicazione su richiesta. -Ciò può migliorare le prestazioni, ad esempio, dello scanner IP o del port scanner. -Il valore viene aggiunto al n. min. predefinito thread (numero thread CPU). -Il valore 0 lascia le impostazioni predefinite. -Se il valore è superiore a quello predefinito max. thread del ThreadPool, verrà usato questo valore. -Se il valore è troppo alto, potrebbero verificarsi problemi di prestazioni. -Le modifiche a questo valore avranno effetto dopo il riavvio dell'applicazione. -Se il valore è stato impostato correttamente, è possibile verificarlo nel file registro in %LocalAppData%\NETworkManager\NETworkManager.log - - - Queste impostazioni modificano solo il numero massimo di thread eseguiti contemporaneamente per scansione host/porta. -Vai in Impostazioni > Generali > Generali per regolare i thread minimi dell'applicazione. - Stato porta