Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

OSXAegirInstaller/aegir.sh

Go to file
 
 
Cannot retrieve contributors at this time
executable file 1458 lines (1260 sloc) 57.6 KB
Raw Blame
Open in GitHub Desktop
#!/bin/sh
# Written by Brian Gilbert @BrianGilbert_ https://github.com/BrianGilbert
# of Realityloop @Realityloop http://realitylop.com/
# I'm by no means a bash scripter, please submit pull requests/issues for improvements. :)
{
# set volume so say text can be heard
osascript -e "set Volume 5"
curl --silent --head https://www.github.com/ | grep "20[0-9] Found|30[0-9] Found" > /dev/null
if [[ $? -eq 1 ]] ; then
printf "########\n# Online, continuing $(date +"%Y-%m-%d %H:%M:%S")\n"
else
printf "########\n# This script needs Internet access and you are offline, exiting\n########\n"
say " you need to be online to run this script, exiting"
exit
fi
# Set some variables for username, installing aegir, backups dir, and the OS X version
USERNAME=${USER-$LOGNAME} #`ps -o user= $(ps -o ppid= $PPID)`
DRUSH='drush --php=/usr/local/bin/php'
BACKUPS_DIR=~/Desktop/aegir-install-backup-$(date +"%Y-%m-%d.%H.%M.%S")
OSX=`sw_vers -productVersion | cut -c 1-5`
# Make sure that the script wasn't run as root.
if [ ${USERNAME} = "root" ] ; then
printf "########\n# This script should not be run as sudo or root. exiting.\n########\n"
say "This script should not be run as sudo or root. exiting."
exit
else
#fresh installations of mac osx does not have /usr/local, so we need to create it first in case it's not there.
printf "########\n# Checking /usr/local exists..\n"
if [ ! -d '/usr/local' ] ; then
printf "# It doesn't so I'm creating it..\n"
say "you may need to enter your password"
sudo mkdir -p /usr/local
fi
ls -l /usr/local| awk '{print $3}'|grep root > /dev/null
if [[ $? -eq 0 ]] ; then
printf "# Setting it's permissions correctly..\n########\n"
sudo chown -R ${USERNAME}:admin /usr/local
chmod 775 /usr/local
fi
fi
printf "########
# This script is designed to be run by the primary account
# it has not been tested on a multi user setup.
########
# You will need the following information during this script:
# -a gmail account that is configured to allow remote smtp access
# -the password for the gmail account address
# -an email address to receive notifications from aegir
# -attention to what is being requested via the script
########
# You cannot use this script if you have macports installed
# so we will uninstall it automatically
########
# OS X's inbuilt apache uses port 80 if it's running we'll disable
# it for you during install so that nginx can run on port 80.
########
# Logging install process to file on desktop in case anything
# goes wrong during install, No passwords are logged..
########\n"
if type "port" > /dev/null 2>&1; then
printf "########\n# Attempting to uninstall macports..\n"
say "you may need to enter your password"
sudo port -fp uninstall installed > /dev/null 2&>1
sudo rm -rf \
/opt/local \
/Applications/DarwinPorts \
/Applications/MacPorts \
/Library/LaunchDaemons/org.macports.* \
/Library/Receipts/DarwinPorts*.pkg \
/Library/Receipts/MacPorts*.pkg \
/Library/StartupItems/DarwinPortsStartup \
/Library/Tcl/darwinports1.0 \
/Library/Tcl/macports1.0 \
~/.macports > /dev/null 2&>1
else
printf "########\n# macports isn't installed continuing..\n"
fi
if type "drush" > /dev/null 2>&1; then
printf "########\n# Remove your existing version of drush first..\n########"
exit
else
printf "########\n# Great, Drush isn't already installed continuing..\n"
fi
ps aux|grep "httpd"|grep -v grep > /dev/null
if [[ $? -eq 1 ]] ; then
printf "########\n# Apache isn't active, continuing..\n########\n"
else
printf "########\n# Disabling apache now..\n########\n"
say "you may need to enter your password"
sudo launchctl unload -w /System/Library/LaunchDaemons/org.apache.httpd.plist
fi
printf "\n########\n# Checking OS version..\n########\n"
if [[ ${OSX} = 10.11 || ${OSX} = 10.10 || ${OSX} = 10.9. ]] ; then
printf "# You're using $OSX, so let's go!\n########\n"
else
printf "# ${OSX} isn't a supported version for this script\n# Update to 10.9+ and rerun the script, exiting.\n########\n"
exit
fi
# Check Aegir isn't already installed.
if [ -e "/var/aegir/.osxaegir" ] ; then
printf "# You already have aegir installed..\n########\n"
say "You already have a gir installed.."
#exit # Remove this line when uninstall block below is fixed.
# Possibly I'll allow reinstallations in the future..
#
printf "# Should I backup some important bits then remove it? \n# The option to re-install will be given after this, if you say no I'll prompt you to update the homebrew components. [Y/n]\n########\n"
say "input required"
read -n1 CLEAN
if [[ ${CLEAN} =~ ^(y|Y)$ ]]; then
printf "# You entered Y\n########\n"
printf "# There is no turning back..\n# This will uninstall aegir and all related homebrew components, are you sure? [Y/n]\n########\n"
say "There is no turning back.. This will uninstall a gir and all related homebrew components including any existing databases, are you sure?"
read -n1 FORSURE
if [[ ${FORSURE} =~ ^(y|Y)$ ]]; then
printf "\n########\n# You entered Y\n"
printf "\n########\n# Don't say I didn't warn you, cleaning everything..\n########\n"
say "Don't say I didn't warn you, removing components.."
mkdir -p $BACKUPS_DIR
printf "# Stopping and deleting any services that are already installed..\n########\n"
if [ -e "/Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist" ] ; then
sudo launchctl unload -w /Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist
sudo rm /Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist
fi
if [ -e "/Library/LaunchDaemons/homebrew.mxcl.nginx.plist" ] ; then
sudo launchctl unload -w /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
sudo rm /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
fi
if [ -e "/Library/LaunchDaemons/homebrew.mxcl.nginx-full.plist" ] ; then
sudo launchctl unload -w /Library/LaunchDaemons/homebrew.mxcl.nginx-full.plist
sudo rm /Library/LaunchDaemons/homebrew.mxcl.nginx-full.plist
fi
if [ -e "~/Library/LaunchAgents/homebrew.mxcl.mariadb.plist" ] ; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.mariadb.plist
kill $(ps aux | grep 'mysqld' | awk '{print $2}')
fi
if [ -e "~/Library/LaunchAgents/homebrew.mxcl.php53.plist" ] ; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist
rm ~/Library/LaunchAgents/homebrew.mxcl.php53.plist
fi
if [ -e "~/Library/LaunchAgents/homebrew.mxcl.php54.plist" ] ; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist
rm ~/Library/LaunchAgents/homebrew.mxcl.php54.plist
fi
if [ -e "~/Library/LaunchAgents/homebrew.mxcl.php55.plist" ] ; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
rm ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
fi
if [ -e "~/Library/LaunchAgents/homebrew.mxcl.php56.plist" ] ; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
rm ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
fi
if [ -e "~/Library/LaunchAgents/org.aegir.hosting.queued.plist" ] ; then
launchctl unload -w ~/Library/LaunchAgents/org.aegir.hosting.queued.plist
rm ~/Library/LaunchAgents/org.aegir.hosting.queued.plist
fi
printf "########\n# Uninstalling related brews..\n########\n"
brew uninstall php53-geoip
brew uninstall php53-imagick
brew uninstall php53-mcrypt
brew uninstall php53-uploadprogress
brew uninstall php53-xdebug
brew uninstall php53-xhprof
brew uninstall php53
sudo rm /var/log/nginx/php53-fpm.log
sudo rm /var/log/aegir/php53-fpm.log
rm /usr/local/bin/go53
brew uninstall php54-geoip
brew uninstall php54-imagick
brew uninstall php54-mcrypt
brew uninstall php54-uploadprogress
brew uninstall php54-xdebug
brew uninstall php54-xhprof
brew uninstall php54
sudo rm /var/log/nginx/php54-fpm.log
sudo rm /var/log/aegir/php54-fpm.log
rm /usr/local/bin/go54
brew uninstall php55-geoip
brew uninstall php55-imagick
brew uninstall php55-mcrypt
brew uninstall php55-uploadprogress
brew uninstall php55-xdebug
brew uninstall php55-xhprof
brew uninstall php55
sudo rm /var/log/nginx/php55-fpm.log
sudo rm /var/log/aegir/php55-fpm.log
rm /usr/local/bin/go55
brew uninstall php56-geoip
brew uninstall php56-imagick
brew uninstall php56-mcrypt
brew uninstall php56-uploadprogress
brew uninstall php56-xdebug
brew uninstall php56-xhprof
brew uninstall php56
sudo rm /var/log/nginx/php56-fpm.log
sudo rm /var/log/aegir/php56-fpm.log
rm /usr/local/bin/go56
rm -rf /usr/local/etc/php
brew uninstall php-code-sniffer
brew uninstall drupal-code-sniffer
brew uninstall phpunit
brew untap josegonzalez/php
brew uninstall re2c
brew uninstall flex
brew uninstall bison27
brew uninstall libevent
brew uninstall openssl
brew uninstall solr
sudo mv /var/log/nginx/access.log $BACKUPS_DIR/brew.nginx.access.log
sudo mv /var/log/nginx/error.log $BACKUPS_DIR/brew.nginx.error.log
sudo mv /var/log/aegir/access.log $BACKUPS_DIR/brew.nginx.access.log
sudo mv /var/log/aegir/error.log $BACKUPS_DIR/brew.nginx.error.log
rm -rf /usr/local/etc/nginx
rm -rf /usr/local/var/run/nginx
sudo rm /var/log/nginx/error.log
sudo rm /var/log/aegir/error.log
brew uninstall nginx
brew uninstall nginx-full
brew uninstall pcre geoip
rm -rf /usr/local/share/GeoIP
brew uninstall dnsmasq
sudo networksetup -setdnsservers AirPort empty
sudo networksetup -setdnsservers Ethernet empty
sudo networksetup -setdnsservers 'Thunderbolt Ethernet' empty
sudo networksetup -setdnsservers Wi-Fi empty
sudo mv /etc/resolv.dnsmasq.conf $BACKUPS_DIR
sudo mv /usr/local/etc/dnsmasq.conf $BACKUPS_DIR
sudo mv /etc/resolver/default $BACKUPS_DIR/resolver.default
sudo mv /etc/resolver/ld $BACKUPS_DIR/resolver.ld
sudo mv /usr/local/etc/dnsmasq.hosts $BACKUPS_DIR
sudo networksetup -setdnsservers AirPort empty
sudo networksetup -setdnsservers Ethernet empty
sudo networksetup -setdnsservers 'Thunderbolt Ethernet' empty
sudo networksetup -setdnsservers Wi-Fi empty
printf "# Removing previous drush installation, this may error..\n########\n"
brew uninstall composer
brew uninstall drush
brew uninstall gzip
brew uninstall wget
printf "# Removing related configurations..\n########\n"
sudo launchctl unload /System/Library/LaunchDaemons/org.postfix.master.plist
sudo mv /etc/postfix/sasl_passwd $BACKUPS_DIR/postfix.sasl_passwd
sudo mv /etc/postfix/main.cf $BACKUPS_DIR/postfix.main.cf
sudo cp /etc/postfix/main.cf.orig /etc/postfix/main.cf
rm ~/.forward
say "Do you want to create backups of your databases?"
printf "# Do you want to backup all existing databases?\n# If you say no here make sure you have backups from your databases.\n# Answer [Y/n]\n########\n"
read -n1 DBBACKUP
if [[ $DBBACKUP =~ ^(y|Y)$ ]]; then
mkdir -p $BACKUPS_DIR/databases
printf "\n# What is your current MariaDB root password? \n########\n"
read DBPASS passw
DBLIST="$(mysql -uroot -h localhost -p$DBPASS -Bse 'show databases')"
if [ ${#DBLIST} -gt 0 ]; then
printf "\n# Backing up databases..\n########\n"
for DBITEM in $DBLIST
do
if [ "$DBITEM" != "performance_schema" ]; then
printf "\n# Database: $DBITEM"
FILE=$BACKUPS_DIR/databases/$DBITEM.$NOW-$(date +"%Y-%m-%d.%H.%M.%S").sql
mysqldump --events --single-transaction -u root -h localhost -p$DBPASS $DBITEM > $FILE
tar czfP $FILE.tar.gz $FILE
rm $FILE
fi
done
fi
fi
printf "\n########\n# Now removing mariadb and all databases..\n########\n"
rm ~/Library/LaunchAgents/homebrew.mxcl.mariadb.plist
brew uninstall mariadb
mv /usr/local/etc/my-drupal.cnf $BACKUPS_DIR
mv /usr/local/etc/my.cnf $BACKUPS_DIR/local.etc.my.cnf
mv /usr/local/etc/my.cnf.d $BACKUPS_DIR
sudo mv /etc/my.cnf $BACKUPS_DIR/etc.my.cnf
rm -rf /usr/local/var/mysql
sudo killall mysqld
brew uninstall autoconf
brew uninstall cmake
brew uninstall curl
brew uninstall freetype
brew uninstall gettext
brew uninstall gmp
brew uninstall gzip
brew uninstall imagemagick
brew uninstall imap-uw
brew uninstall jpeg
brew uninstall libpng
brew uninstall libtool
brew uninstall mcrypt
brew uninstall pkg-config
brew uninstall unixodbc
brew uninstall zlib
brew uninstall apple-gcc42
sudo killall php-fpm
mv ~/Desktop/YourAegirSetup.txt $BACKUPS_DIR/YourAegirSetup.txt-.pre-uninstall-$(date +"%Y-%m-%d.%H.%M.%S")
printf "# Renaming your Aegir folder to /var/aegir.pre-uninstall-TI-ME-ST-AM-P....\n########\n"
sudo mv /var/aegir $BACKUPS_DIR/aegir-config-pre-uninstall-$(date +"%Y-%m-%d.%H.%M.%S")
mv ~/.drush/provision $BACKUPS_DIR/aegir-config-pre-uninstall-$(date +"%Y-%m-%d.%H.%M.%S")
say "input required"
printf "# would you now like to re-install Aegir? [Y/n]\n########\n"
read -n1 REINSTALL
if [[ ${REINSTALL} =~ ^(y|Y)$ ]]; then
printf "\n########\n# You entered Y\n########\n"
else
printf "\n########\n# You entered N\n########\n"
exit
fi
else
printf "# Exiting..\n########\n"
exit
fi
else
printf "# Should I attempt an upgrade of the homebrew components? [Y/n]\n########\n"
say "Should try an of homebrews bits?"
read UPGRADE
if [[ $UPGRADE =~ ^(y|Y)$ ]]; then
# printf "# Should I install the dev version of Aegir? [Y/n]\n########\n"
# read DEV
# if [[ $DEV =~ ^(y|Y)$ ]]; then
# INSTALL = '7.x-3.x';
# else
# INSTALL = '6.x-2.1';
# fi
# if [ -d "/var/aegir/hostmaster-6.x-2.x" ]; then
# # Control will enter here if 6.x-2.0 directory exists.
# CURRENTINSTALL = '/var/aegir/hostmaster-6.x-2.x';
# fi
# if [ -d "/var/aegir/hostmaster-6.x-2.0" ]; then
# # Control will enter here if 6.x-2.0 directory exists.
# CURRENTINSTALL = '/var/aegir/hostmaster-6.x-2.0';
# fi
# if [ -d "/var/aegir/hostmaster-6.x-2.1" ]; then
# # Control will enter here if 6.x-2.0 directory exists.
# CURRENTINSTALL = '/var/aegir/hostmaster-6.x-2.1';
# fi
# if [ -d "/var/aegir/hostmaster-7.x-3.x" ]; then
# # Control will enter here if 7.x-3.x directory exists.
# CURRENTINSTALL = '/var/aegir/hostmaster-7.x-3.x';
# fi
printf "# Upgrading homebrew components...\n########\n"
brew update
brew upgrade apple-gcc42
brew upgrade wget
brew upgrade curl --with-homebrew-openssl
brew upgrade gzip
brew upgrade libpng
brew upgrade dnsmasq
brew upgrade pcre geoip
brew upgrade nginx-full --with-debug --with-flv --with-geoip --with-gzip-static --with-webdav --with-mp4 --with-spdy --with-ssl --with-status --with-upload-progress-module
if [ -e "/Library/LaunchDaemons/homebrew.mxcl.nginx.plist" ] ; then
sudo rm /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
sudo cp $(brew --prefix nginx-full)/homebrew.mxcl.nginx-full.plist /Library/LaunchDaemons/
fi
echo "update path to nginx logfiles, you'll need to enter password here."
sudo mkdir -p /var/log/aegir
sudo chown -R ${USERNAME}:admin /var/log/aegir
sudo rm /var/log/nginx/error.log
sudo rm /var/log/aegir/nginx-error.log
brew upgrade cmake
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.mariadb.plist
brew upgrade mariadb
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mariadb.plist
PHPAVAIL=`ls -d /usr/local/Cellar/php5* | grep 'php5[0-9]$' | cut -c 22-24`
PHPLIVE=`php --version |grep 5|cut -c 5-7`
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
rm ~/Library/LaunchAgents/homebrew.mxcl.php53.plist
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
rm ~/Library/LaunchAgents/homebrew.mxcl.php54.plist
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
rm ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
rm ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
if [[ ${PHPAVAIL} == *"56"* ]] ; then
sudo rm -rf $(brew --prefix homebrew/php/php56)/var
brew unlink php53 > /dev/null 2>&1
brew unlink php54 > /dev/null 2>&1
brew unlink php55 > /dev/null 2>&1
brew link php56
brew upgrade php56 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-curl --with-homebrew-openssl
brew upgrade php56-geoip
brew upgrade php56-imagick
brew upgrade php56-mcrypt
brew upgrade php56-uploadprogress
brew upgrade php56-xdebug
brew upgrade php56-xhprof
sudo rm /var/log/nginx/php56-fpm.log
sudo rm /var/log/aegir/php56-fpm.log
cp $(brew --prefix homebrew/php/php56)/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
brew unlink php56
fi
if [[ ${PHPAVAIL} == *"55"* ]] ; then
sudo rm -rf $(brew --prefix homebrew/php/php55)/var
brew unlink php53 > /dev/null 2>&1
brew unlink php54 > /dev/null 2>&1
brew unlink php56 > /dev/null 2>&1
brew link php55
brew upgrade php55 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-curl --with-homebrew-openssl
brew upgrade php55-geoip
brew upgrade php55-imagick
brew upgrade php55-mcrypt
brew upgrade php55-uploadprogress
brew upgrade php55-xdebug
brew upgrade php55-xhprof
sudo rm /var/log/nginx/php55-fpm.log
sudo rm /var/log/aegir/php55-fpm.log
cp $(brew --prefix homebrew/php/php55)/homebrew.mxcl.php55.plist ~/Library/LaunchAgents/
brew unlink php55
fi
if [[ ${PHPAVAIL} == *"54"* ]] ; then
sudo rm -rf $(brew --prefix homebrew/php/php54)/var
brew unlink php53 > /dev/null 2>&1
brew unlink php55 > /dev/null 2>&1
brew unlink php56 > /dev/null 2>&1
brew link php54
brew upgrade php54 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-curl --with-homebrew-openssl
brew upgrade php54-geoip
brew upgrade php54-imagick
brew upgrade php54-mcrypt
brew upgrade php54-uploadprogress
brew upgrade php54-xdebug
brew upgrade php54-xhprof
sudo rm /var/log/nginx/php54-fpm.log
sudo rm /var/log/aegir/php54-fpm.log
cp $(brew --prefix homebrew/php/php54)/homebrew.mxcl.php54.plist ~/Library/LaunchAgents/
brew unlink php54
fi
if [[ ${PHPAVAIL} == *"53"* ]] ; then
sudo rm -rf $(brew --prefix homebrew/php/php53)/var
brew unlink php54 > /dev/null 2>&1
brew unlink php55 > /dev/null 2>&1
brew unlink php56 > /dev/null 2>&1
brew link php53
brew upgrade re2c
brew upgrade flex
brew upgrade bison27
brew upgrade libevent
brew upgrade php53 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-curl --with-homebrew-openssl
brew upgrade php53-geoip
brew upgrade php53-imagick
brew upgrade php53-mcrypt
brew upgrade php53-uploadprogress
brew upgrade php53-xdebug
brew upgrade php53-xhprof
sudo rm /var/log/nginx/php53-fpm.log
sudo rm /var/log/aegir/php53-fpm.log
cp $(brew --prefix homebrew/php/php53)/homebrew.mxcl.php53.plist ~/Library/LaunchAgents/
brew unlink php53
fi
if [[ ${PHPAVAIL} == *"53"* ]] ; then
brew link php53
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist
fi
if [[ ${PHPAVAIL} == *"54"* ]] ; then
brew link php54
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist
fi
if [[ ${PHPAVAIL} == *"55"* ]] ; then
brew link php55
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
fi
if [[ ${PHPAVAIL} == *"56"* ]] ; then
brew link php56
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
fi
mkdir -p /usr/local/share/GeoIP
curl http://geolite.maxmind.com/download/geoip/database/GeoLiteCountry/GeoIP.dat.gz > /usr/local/share/GeoIP/GeoIP.dat.gz
gunzip -f GeoIP.dat.gz &> /dev/null
brew upgrade php-code-sniffer
brew upgrade drupal-code-sniffer
brew upgrade phpunit
brew upgrade homebrew/php/composer
composer global require drush/drush:dev-master
HAVESOLR=`ls -d /usr/local/Cellar/solr`
if [[ ${HAVESOLR} == *"solr"* ]] ; then
brew upgrade solr
fi
brew cleanup
# # Aegir upgrade
# say "Input will be required."
# $DRUSH dl --destination=/Users/admin/.drush provision-{$INSTALL};
# $DRUSH cache-clear drush
# OLD_AEGIR_DIR={$CURRENTINSTALL};
# AEGIR_VERSION={$INSTALL};
# AEGIR_DOMAIN=aegir.ld;
# cd $OLD_AEGIR_DIR;
# drush hostmaster-migrate $AEGIR_DOMAIN /var/aegir/hostmaster-$AEGIR_VERSION --debug
exit
else
printf "# Exiting..\n########\n"
say "Exiting."
exit
fi
fi
fi
# printf "\n########\n# If xcode is installed check it's license has been agreed to..\n########\n"
# xcode-select -p > /dev/null 2&>1
# if [[ $? -eq 127 ]] ; then
# printf "########\n# xcode isn't installed continuing..\n"
# else
# printf "########\n# ensuring xcode license has been agreed to..\nn"
# xcodebuild -license
# fi
printf "\n########\n# Checking if Homebrew is installed..\n########\n"
if type "brew" > /dev/null 2>&1; then
printf "\n########\n# Affirmative! Let's make sure everything is up to date..\n# Just so you know, this may throw a few warnings..\n########\n"
say "Making sure homebrew is up to date, you may see some errors in the output, that's ok."
export PATH=/usr/local/bin:/usr/local/sbin:${HOME}/.composer/vendor/bin:${PATH}
brew prune
brew update
brew doctor
if [[ $? -eq 0 ]] ; then
printf "########\n# Homebrew in order, continuing\n########"
else
printf "########\n# Homebrew needs some work, exiting\n########"
exit
fi
else
printf "# Nope! Installing Homebrew now..\n########\n"
say "Installing homebrew now, you'll need to hit return when prompted"
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
echo "export PATH=/usr/local/bin:/usr/local/sbin:${HOME}/.composer/vendor/bin:${PATH}" >> ~/.bash_profile
echo "export PATH=/usr/local/bin:/usr/local/sbin:${HOME}/.composer/vendor/bin:${PATH}" >> ~/.zshrc
source ~/.bash_profile
fi
printf "\n########\n# Doing some setup ready for Aegir install..\n########\n"
sudo mkdir -p /var/aegir
sudo chown ${USERNAME} /var/aegir
sudo chgrp staff /var/aegir
echo "$(date +"%Y-%m-%d %H:%M:%S")" > /var/aegir/.osxaegir
sudo dscl . append /Groups/_www GroupMembership ${USERNAME}
echo "
# Your hostname will be set to aegir.ld
########
# Install the developmental version of Aegir (7.x-3.x)? [Y/n]:
########"
say "input required"
read -n1 AEGIR7X
if [[ ${AEGIR7X} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
echo "
########
# I can install multiple versions of PHP; 5.3, 5.4 5.5 and/or 5.6.
# Let me know which versions you'd like installed.
# Set up PHP 5.3 [Y/n]:
########"
say "input required"
read -n1 PHP53
if [[ ${PHP53} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
if [[ ${PHP53} =~ ^(y|Y)$ ]]; then
echo "
########
# Make PHP 5.3 the default [Y/n]:
########"
say "input required"
read -n1 PHP53DEF
if [[ ${PHP53DEF} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
fi
echo "
########
# Set up PHP 5.4 [Y/n]:
########"
say "input required"
read -n1 PHP54
if [[ ${PHP54} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
if [[ ! ${PHP53DEF} =~ ^(y|Y)$ ]]; then
if [[ ${PHP54} =~ ^(y|Y)$ ]]; then
echo "
########
# Make PHP 5.4 the default [Y/n]:
########"
say "input required"
read -n1 PHP54DEF
if [[ ${PHP54DEF} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
fi
fi
echo "
########
# Set up PHP 5.5 [Y/n]:
########"
say "input required"
read -n1 PHP55
if [[ ${PHP55} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
if [[ ${PHP53DEF} =~ ^(y|Y)$ || ${PHP54DEF} =~ ^(y|Y)$ ]]; then
echo ""
else
echo "
########
# Make PHP 5.5 the default [Y/n]:
########"
say "input required"
read -n1 PHP55DEF
if [[ ${PHP55DEF} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
fi
echo "
########
# Set up PHP 5.6 [Y/n]:
########"
say "input required"
read -n1 PHP56
if [[ ${PHP56} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
if [[ ${PHP53DEF} =~ ^(y|Y)$ || ${PHP54DEF} =~ ^(y|Y)$ || ${PHP55DEF} =~ ^(y|Y)$ ]]; then
echo ""
else
echo "
########
# Make PHP 5.6 the default [Y/n]:
########"
say "input required"
read -n1 PHP56DEF
if [[ ${PHP56DEF} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
else
printf "\n# You entered N\n########\n"
fi
fi
if [[ ! ${PHP53} =~ ^(y|Y)$ && ! ${PHP54} =~ ^(y|Y)$ && ! ${PHP55} =~ ^(y|Y)$ ]]; then
echo "
########
# You didn't select any version of PHP?!? So I'm installing PHP5.6
########"
PHP56="Y"
PHP56DEF="Y"
fi
echo "
########
# I can also setup ApacheSolr which is best used in conjunction with:
# https://drupal.org/project/search_api_solr
# Set up solr [Y/n]:
########"
say "input required"
read -n1 SOLR
if [[ ${SOLR} =~ ^(y|Y)$ ]]; then
printf "\n# You entered Y\n########\n"
fi
# Tap required kegs
printf "\n########\n# Now we'll tap some extra kegs we need..\n########\n"
brew tap homebrew/versions
brew tap homebrew/dupes
brew tap homebrew/homebrew-php
brew tap homebrew/nginx
brew update
brew doctor
# Install required formula's
printf "# Installing required brew formulae..\n########\n"
printf "# Installing cask..\n########\n"
brew install caskroom/cask/brew-cask
printf "# Installing gcc..\n########\n"
brew install apple-gcc42
printf "\n########\n# Installing java8..\n########\n"
say "You may need to enter your password now"
brew cask install java
printf "\n########\n# Installing wget..\n########\n"
brew install wget
printf "\n########\n# Installing curl..\n########\n"
brew install --with-openssl curl
printf "\n########\n# Installing gzip..\n########\n"
brew install gzip
printf "\n########\n# Installing libpng..\n########\n"
brew install libpng
printf "\n########\n# Installing dnsmasq..\n########\n"
brew install dnsmasq
printf "\n########\n# Configuring dnsmasq..\n########\n"
mkdir -p /usr/local/etc
# Configure dnsmasq
printf "########\n# Setting up wildcard DNS so that domains ending in dot ld will resolve to your local machine\n"
if [ -e "/usr/local/etc/dnsmasq.conf" ] ; then
printf "########\n# You already have a dnsmasq.conf file..\n# So this all works proerly I'm going to backup and recreate it..\n########\n"
mv /usr/local/etc/dnsmasq.conf $BACKUPS_DIR
fi
printf "# Setting dnsmasq config..\n########\n"
cp $(brew --prefix dnsmasq)/dnsmasq.conf.example /usr/local/etc/dnsmasq.conf
echo '# Edited by OSX Aegir install script' | cat - /usr/local/etc/dnsmasq.conf > temp && mv temp /usr/local/etc/dnsmasq.conf
echo "\nresolv-file=/etc/resolv.dnsmasq.conf" >> /usr/local/etc/dnsmasq.conf
echo "address=/.ld/127.0.0.1" >> /usr/local/etc/dnsmasq.conf
echo "listen-address=127.0.0.1" >> /usr/local/etc/dnsmasq.conf
echo "addn-hosts=/usr/local/etc/dnsmasq.hosts" >> /usr/local/etc/dnsmasq.conf
touch /usr/local/etc/dnsmasq.hosts
if [ -e "/etc/resolv.dnsmasq.conf" ] ; then
printf "# You already have a resolv.conf set..\n# So this all works properly I'm going to backup and recreate it..\n########\n"
say "You may be prompted for your password"
sudo mv /etc/resolv.dnsmasq.conf $BACKUPS_DIR
fi
printf "# Setting OpenDNS and Google DNS servers as fallbacks..\n########\n"
say "You may need to enter your password now"
sudo sh -c 'echo "# OpenDNS IPv6:
nameserver 2620:0:ccd::2
nameserver 2620:0:ccc::2
# Google IPv6:
nameserver 2001:4860:4860::8888
nameserver 2001:4860:4860::8844
# OpenDNS:
nameserver 208.67.222.222
nameserver 208.67.220.220
# Google:
nameserver 8.8.8.8
nameserver 8.8.4.4" >> /etc/resolv.dnsmasq.conf'
if [ -e "/etc/resolver/ld" ] ; then
printf "# You already have a resolver set for when you are offline..\n# So this all works properly I'm going to backup and recreate it..\n########\n"
say "You may be prompted for your password"
sudo mv /etc/resolver/ $BACKUPS_DIR
fi
printf "########\n# Making local domains resolve when your disconnected from net..\n########\n"
sudo mkdir -p /etc/resolver
sudo sh -c 'echo "nameserver 127.0.0.1" >> /etc/resolver/ld'
printf "# Setting hostname to aegir.ld\n########\n"
sudo scutil --set HostName aegir.ld
# Start dnsmasq
printf "# Copying dnsmasq launch daemon into place..\n########\n"
sudo cp $(brew --prefix dnsmasq)/homebrew.mxcl.dnsmasq.plist /Library/LaunchDaemons
printf "# Starting dnsmasq..\n########\n"
sudo launchctl load -w /Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist
printf "\n########\n# Installing nginx..\n########\n"
brew install pcre geoip
brew install nginx-full --with-debug --with-flv --with-geoip --with-gzip-static --with-webdav --with-mp4 --with-spdy --with-ssl --with-status --with-upload-progress-module
printf "\n########\n# Configuring nginx..\n########\n"
if [ -e "/usr/local/etc/nginx/nginx.conf" ] ; then
mv /usr/local/etc/nginx/nginx.conf /usr/local/etc/nginx/nginx.conf.bak
fi
curl https://gist.githubusercontent.com/BrianGilbert/5908352/raw/097a8128efd6815dbbacd18339b60c0ad780f65f/nginx.conf > /usr/local/etc/nginx/nginx.conf
sed -i '' 's/\[username\]/'${USERNAME}'/' /usr/local/etc/nginx/nginx.conf
mkdir -p /usr/local/etc/nginx/conf.d
say "You may be prompted for your password"
sudo mkdir -p /var/log/aegir
sudo chown -R ${USERNAME}:admin /var/log/aegir
sudo mkdir -p /var/lib/nginx
mkdir -p /usr/local/var/run/nginx/proxy_temp
mkdir -p /usr/local/share/GeoIP
curl http://geolite.maxmind.com/download/geoip/database/GeoLiteCountry/GeoIP.dat.gz > /usr/local/share/GeoIP/GeoIP.dat.gz
gunzip -f GeoIP.dat.gz &> /dev/null
printf "\n########\n# Installing mariadb..\n########\n"
brew install cmake
brew install mariadb
unset TMPDIR
printf "\n########\n# Configuring mariadb..\n########\n"
mkdir -p /usr/local/etc/my.cnf.d
mysql_install_db --user=${USERNAME} --basedir="$(brew --prefix mariadb)" --datadir=/usr/local/var/mysql --tmpdir=/tmp
curl https://gist.githubusercontent.com/BrianGilbert/6207328/raw/10e298624ede46e361359b78a1020c82ddb8b943/my-drupal.cnf > /usr/local/etc/my.cnf.d/my-drupal.cnf
say "You may be prompted for your password"
if [[ ${PHP56} =~ ^(y|Y)$ ]]; then
printf "\n########\n# Installing php56..\n########\n"
brew install php56 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-openssl
brew install php56-geoip
brew install php56-imagick
brew install php56-mcrypt
brew install php56-uploadprogress
brew install php56-xdebug
brew install php56-xhprof
# Make sure LaunchAgents directory exists
mkdir -p ~/Library/LaunchAgents
printf "\n########\n# Configuring php56..\n########\n"
sed -i '' '/timezone =/ a\
date.timezone = Australia/Melbourne\
' /usr/local/etc/php/5.6/php.ini
sed -i '' 's/post_max_size = .*/post_max_size = '50M'/' /usr/local/etc/php/5.6/php.ini
sed -i '' 's/upload_max_filesize = .*/upload_max_filesize = '10M'/' /usr/local/etc/php/5.6/php.ini
sed -i '' 's/max_execution_time = .*/max_execution_time = '90'/' /usr/local/etc/php/5.6/php.ini
sed -i '' 's/memory_limit = .*/memory_limit = '512M'/' /usr/local/etc/php/5.6/php.ini
sed -i '' 's/pdo_mysql.default_socket=.*/pdo_mysql.default_socket= \/tmp\/mysql.sock/' /usr/local/etc/php/5.6/php.ini
sed -i '' '/pid = run/ a\
pid = /usr/local/var/run/php-fpm.pid\
' /usr/local/etc/php/5.6/php-fpm.conf
# Additions for xdebug to work with PHPStorm
echo "xdebug.max_nesting_level = 200
xdebug.profiler_enable = 1
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_name = xdebug-profile-cachegrind.out-%H-%R
xdebug.profiler_output_dir = /tmp/xdebug/
xdebug.remote_autostart = 0
xdebug.remote_enable=1
xdebug.remote_connect_back = 1
xdebug.remote_port = 9001
xdebug.remote_host = localhost
xdebug.var_display_max_children = 128
xdebug.var_display_max_data = 2048
xdebug.var_display_max_depth = 32" >> /usr/local/etc/php/5.6/conf.d/ext-xdebug.ini
say "You may be prompted for your password"
sudo ln -s $(brew --prefix homebrew/php/php56)/var/log/php-fpm.log /var/log/aegir/php56-fpm.log
cp $(brew --prefix homebrew/php/php56)/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
echo "#!/bin/sh
# Written by Brian Gilbert @BrianGilbert_ https://github.com/BrianGilbert
# of Realityloop @Realityloop http://realitylop.com/
# Remove old symlink for xhprof and create correct one for this version of php
rm /usr/local/opt/xhprof > /dev/null 2>&1
ln -s $(brew --prefix php56-xhprof) /usr/local/opt/xhprof
# Stop php-fpm and start correct version
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
# Brew link correct php version
brew unlink php53 > /dev/null 2>&1
brew unlink php54 > /dev/null 2>&1
brew unlink php55 > /dev/null 2>&1
brew link php56
# Restart nginx
sudo /usr/local/bin/nginx -s reload" >> /usr/local/bin/go56
chmod 755 /usr/local/bin/go56
brew unlink php56
fi
if [[ ${PHP55} =~ ^(y|Y)$ ]]; then
printf "\n########\n# Installing php55..\n########\n"
brew install php55 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-openssl
brew install php55-geoip
brew install php55-imagick
brew install php55-mcrypt
brew install php55-uploadprogress
brew install php55-xdebug
brew install php55-xhprof
# Make sure LaunchAgents directory exists
mkdir -p ~/Library/LaunchAgents
printf "\n########\n# Configuring php55..\n########\n"
sed -i '' '/timezone =/ a\
date.timezone = Australia/Melbourne\
' /usr/local/etc/php/5.5/php.ini
sed -i '' 's/post_max_size = .*/post_max_size = '50M'/' /usr/local/etc/php/5.5/php.ini
sed -i '' 's/upload_max_filesize = .*/upload_max_filesize = '10M'/' /usr/local/etc/php/5.5/php.ini
sed -i '' 's/max_execution_time = .*/max_execution_time = '90'/' /usr/local/etc/php/5.5/php.ini
sed -i '' 's/memory_limit = .*/memory_limit = '512M'/' /usr/local/etc/php/5.5/php.ini
sed -i '' 's/pdo_mysql.default_socket=.*/pdo_mysql.default_socket= \/tmp\/mysql.sock/' /usr/local/etc/php/5.5/php.ini
sed -i '' '/pid = run/ a\
pid = /usr/local/var/run/php-fpm.pid\
' /usr/local/etc/php/5.5/php-fpm.conf
# Additions for xdebug to work with PHPStorm
echo "xdebug.max_nesting_level = 200
xdebug.profiler_enable = 1
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_name = xdebug-profile-cachegrind.out-%H-%R
xdebug.profiler_output_dir = /tmp/xdebug/
xdebug.remote_autostart = 0
xdebug.remote_enable=1
xdebug.remote_connect_back = 1
xdebug.remote_port = 9001
xdebug.remote_host = localhost
xdebug.var_display_max_children = 128
xdebug.var_display_max_data = 2048
xdebug.var_display_max_depth = 32" >> /usr/local/etc/php/5.5/conf.d/ext-xdebug.ini
say "You may be prompted for your password"
sudo ln -s $(brew --prefix homebrew/php/php55)/var/log/php-fpm.log /var/log/aegir/php55-fpm.log
cp $(brew --prefix homebrew/php/php55)/homebrew.mxcl.php55.plist ~/Library/LaunchAgents/
echo "#!/bin/sh
# Written by Brian Gilbert @BrianGilbert_ https://github.com/BrianGilbert
# of Realityloop @Realityloop http://realitylop.com/
# Remove old symlink for xhprof and create correct one for this version of php
rm /usr/local/opt/xhprof > /dev/null 2>&1
ln -s $(brew --prefix php55-xhprof) /usr/local/opt/xhprof
# Stop php-fpm and start correct version
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
# Brew link correct php version
brew unlink php53 > /dev/null 2>&1
brew unlink php54 > /dev/null 2>&1
brew unlink php56 > /dev/null 2>&1
brew link php55
# Restart nginx
sudo /usr/local/bin/nginx -s reload" >> /usr/local/bin/go55
chmod 755 /usr/local/bin/go55
brew unlink php55
fi
if [[ ${PHP54} =~ ^(y|Y)$ ]]; then
printf "\n########\n# Installing php54..\n########\n"
brew install php54 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-openssl
brew install php54-geoip
brew install php54-imagick
brew install php54-mcrypt
brew install php54-uploadprogress
brew install php54-xdebug
brew install php54-xhprof
printf "\n########\n# Configuring php54..\n########\n"
sed -i '' '/timezone =/ a\
date.timezone = Australia/Melbourne\
' /usr/local/etc/php/5.4/php.ini
sed -i '' 's/post_max_size = .*/post_max_size = '50M'/' /usr/local/etc/php/5.4/php.ini
sed -i '' 's/upload_max_filesize = .*/upload_max_filesize = '10M'/' /usr/local/etc/php/5.4/php.ini
sed -i '' 's/max_execution_time = .*/max_execution_time = '90'/' /usr/local/etc/php/5.4/php.ini
sed -i '' 's/memory_limit = .*/memory_limit = '512M'/' /usr/local/etc/php/5.4/php.ini
sed -i '' 's/pdo_mysql.default_socket=.*/pdo_mysql.default_socket= \/tmp\/mysql.sock/' /usr/local/etc/php/5.4/php.ini
sed -i '' '/pid = run/ a\
pid = /usr/local/var/run/php-fpm.pid\
' /usr/local/etc/php/5.4/php-fpm.conf
# Additions for xdebug to work with PHPStorm
echo "xdebug.max_nesting_level = 200
xdebug.profiler_enable = 1
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_name = xdebug-profile-cachegrind.out-%H-%R
xdebug.profiler_output_dir = /tmp/xdebug/
xdebug.remote_autostart = 0
xdebug.remote_enable=1
xdebug.remote_connect_back = 1
xdebug.remote_port = 9001
xdebug.remote_host = localhost
xdebug.var_display_max_children = 128
xdebug.var_display_max_data = 2048
xdebug.var_display_max_depth = 32" >> /usr/local/etc/php/5.4/conf.d/ext-xdebug.ini
say "You may be prompted for your password"
sudo ln -s $(brew --prefix homebrew/php/php54)/var/log/php-fpm.log /var/log/aegir/php54-fpm.log
mkdir -p ~/Library/LaunchAgents
cp $(brew --prefix homebrew/php/php54)/homebrew.mxcl.php54.plist ~/Library/LaunchAgents/
echo "#!/bin/sh
# Written by Brian Gilbert @BrianGilbert_ https://github.com/BrianGilbert
# of Realityloop @Realityloop http://realitylop.com/
# Remove old symlink for xhprof and create correct one for this version of php
rm /usr/local/opt/xhprof > /dev/null 2>&1
ln -s $(brew --prefix php54-xhprof) /usr/local/opt/xhprof
# Stop php-fpm and start correct version
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist
# Brew link correct php version
brew unlink php53 > /dev/null 2>&1
brew unlink php55 > /dev/null 2>&1
brew unlink php56 > /dev/null 2>&1
brew link php54
# Restart nginx
sudo /usr/local/bin/nginx -s reload" >> /usr/local/bin/go54
chmod 755 /usr/local/bin/go54
brew unlink php54
fi
if [[ ${PHP53} =~ ^(y|Y)$ ]]; then
printf "\n########\n# Installing php53 prerequisites..\n########\n"
brew install re2c
brew install flex
brew install bison27
brew install libevent
printf "\n########\n# Installing php53..\n########\n"
brew install php53 --without-snmp --with-fpm --with-gmp --with-imap --with-mysql --with-homebrew-curl --with-homebrew-libxslt --with-homebrew-openssl
brew install php53-geoip
brew install php53-imagick
brew install php53-mcrypt
brew install php53-uploadprogress
brew install php53-xdebug
brew install php53-xhprof
printf "\n########\n# Configuring php53..\n########\n"
sed -i '' '/timezone =/ a\
date.timezone = Australia/Melbourne\
' /usr/local/etc/php/5.3/php.ini
sed -i '' 's/post_max_size = .*/post_max_size = '50M'/' /usr/local/etc/php/5.3/php.ini
sed -i '' 's/upload_max_filesize = .*/upload_max_filesize = '10M'/' /usr/local/etc/php/5.3/php.ini
sed -i '' 's/max_execution_time = .*/max_execution_time = '90'/' /usr/local/etc/php/5.3/php.ini
sed -i '' 's/memory_limit = .*/memory_limit = '512M'/' /usr/local/etc/php/5.3/php.ini
sed -i '' 's/pdo_mysql.default_socket=.*/pdo_mysql.default_socket= \/tmp\/mysql.sock/' /usr/local/etc/php/5.3/php.ini
sed -i '' '/pid = run/ a\
pid = /usr/local/var/run/php-fpm.pid\
' /usr/local/etc/php/5.3/php-fpm.conf
# Additions for xdebug to work with PHPStorm
echo "xdebug.max_nesting_level = 200
xdebug.profiler_enable = 1
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_name = xdebug-profile-cachegrind.out-%H-%R
xdebug.profiler_output_dir = /tmp/xdebug/
xdebug.remote_autostart = 0
xdebug.remote_enable=1
xdebug.remote_connect_back = 1
xdebug.remote_port = 9001
xdebug.remote_host = localhost
xdebug.var_display_max_children = 128
xdebug.var_display_max_data = 2048
xdebug.var_display_max_depth = 32" >> /usr/local/etc/php/5.3/conf.d/ext-xdebug.ini
say "You may be prompted for your password"
sudo ln -s $(brew --prefix homebrew/php/php53)/var/log/php-fpm.log /var/log/aegir/php53-fpm.log
cp $(brew --prefix homebrew/php/php53)/homebrew.mxcl.php53.plist ~/Library/LaunchAgents/
echo "#!/bin/sh
# Written by Brian Gilbert @BrianGilbert_ https://github.com/BrianGilbert
# of Realityloop @Realityloop http://realitylop.com/
# Remove old symlink for xhprof and create correct one for this version of php
rm /usr/local/opt/xhprof > /dev/null 2>&1
ln -s $(brew --prefix php53-xhprof) /usr/local/opt/xhprof
# Stop php-fpm and start correct version
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist
# Brew link correct php version
brew unlink php54 > /dev/null 2>&1
brew unlink php55 > /dev/null 2>&1
brew unlink php56 > /dev/null 2>&1
brew link php53
# Restart nginx
sudo /usr/local/bin/nginx -s reload" >> /usr/local/bin/go53
chmod 755 /usr/local/bin/go53
brew unlink php53
fi
if [[ ${PHP53DEF} =~ ^(y|Y)$ ]]; then
brew link php53
fi
if [[ ${PHP54DEF} =~ ^(y|Y)$ ]]; then
brew link php54
fi
if [[ ${PHP55DEF} =~ ^(y|Y)$ ]]; then
brew link php55
fi
if [[ ${PHP56DEF} =~ ^(y|Y)$ ]]; then
brew link php56
fi
printf "\n########\n# Installing php code sniffer..\n########\n"
brew install php-code-sniffer
printf "\n########\n# Installing drupal code sniffer..\n########\n"
brew install drupal-code-sniffer
printf "\n########\n# Installing phpunit..\n########\n"
brew install phpunit
printf "########\n# Installing composer..\n########\n"
brew install homebrew/php/composer
printf "\n########\n# Installing drush..\n########\n"
# Uninstall drush if it was previously installed via homebrew
brew uninstall drush > /dev/null 2&>1
if [[ ${AEGIR7X} =~ ^(y|Y)$ ]]; then
composer global require drush/drush:7.x
else
composer global require drush/drush:7.x
fi
#Solr
if [[ ${SOLR} =~ ^(y|Y)$ ]]; then
printf "\n########\n# Installing solr..\n########\n"
brew install solr4
printf "\n########\n# Backing up default multicore config..\n########\n"
cp -rp $(brew --prefix solr4)/example/multicore $(brew --prefix solr4)/example/multicore.bak
mkdir -p /usr/local/etc/solr4
cp -rp $(brew --prefix solr4)/example/multicore /usr/local/etc/solr4/multicore
mkdir -p /usr/local/var/log/solr4
curl https://gist.githubusercontent.com/BrianGilbert/ddd8dd9be78dc3d0201d/raw/03b303cfd696026e26f738e9b1200ce45a36ee5f/homebrew.mxcl.solr4.plist > ~/Library/LaunchAgents/homebrew.mxcl.solr4.plist
fi
printf "\n########\n# Setting up launch daemons..\n########\n"
say "you may be prompted for your password"
sudo cp $(brew --prefix nginx-full)/homebrew.mxcl.nginx-full.plist /Library/LaunchDaemons/
sudo chown root:wheel /Library/LaunchDaemons/homebrew.mxcl.nginx-full.plist
cp $(brew --prefix mariadb)/homebrew.mxcl.mariadb.plist ~/Library/LaunchAgents/
sudo mkdir -p /var/log/nginx
ln -s /var/log/nginx/access.log /var/log/aegir/nginx-access.log
printf "\n########\n# Launching daemons now..\n########\n"
sudo launchctl load -w /Library/LaunchDaemons/homebrew.mxcl.nginx-full.plist
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mariadb.plist
if [[ ${PHP55DEF} =~ ^(y|Y)$ ]]; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
fi
if [[ ${PHP55DEF} =~ ^(y|Y)$ ]]; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
fi
if [[ ${PHP54DEF} =~ ^(y|Y)$ ]]; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist
fi
if [[ ${PHP53DEF} =~ ^(y|Y)$ ]]; then
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php54.plist > /dev/null 2>&1
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist > /dev/null 2>&1
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php53.plist
fi
if [[ ${SOLRBOOT} =~ ^(y|Y)$ ]]; then
launchctl load -w ~/Library/LaunchAgents/com.apache.solr.plist
fi
printf "\n########\n# Finishing mariadb setup..\n########\n"
sudo PATH="/usr/local/bin:/usr/local/sbin:$HOME/.composer/vendor/bin:${PATH}" $(brew --prefix mariadb)/bin/mysql_secure_installation <<END
y
root
root
y
y
y
y
END
echo "${USERNAME} ALL=NOPASSWD: /usr/local/bin/nginx" | sudo tee -a /etc/sudoers
ln -s /var/aegir/config/nginx.conf /usr/local/etc/nginx/conf.d/aegir.conf
printf "# Aegir time..\n########\n"
printf "# Downloading provision..\n########\n"
if [[ ${AEGIR7X} =~ ^(y|Y)$ ]]; then
${DRUSH} dl --package-handler=git_drupalorg --destination=/Users/${USERNAME}/.drush provision-7.x-3.x
else
${DRUSH} dl --package-handler=git_drupalorg --destination=/Users/${USERNAME}/.drush provision-7.x-3.1
fi
printf "\n########\n# Clearing drush caches..\n########\n"
${DRUSH} cache-clear drush
printf "\n########\n# Installing hostmaster..\n########\n"
say "type the DB password you entered for my SQL earlier"
if [[ ${AEGIR7X} =~ ^(y|Y)$ ]]; then
${DRUSH} hostmaster-install --aegir_root='/var/aegir' --root='/var/aegir/hostmaster-7.x-3.x' --http_service_type=nginx --aegir_host=aegir.ld --working-copy --client_email=${EMAIL} aegir.ld <<END
root
y
END
else
${DRUSH} hostmaster-install --aegir_root='/var/aegir' --root='/var/aegir/hostmaster-7.x-3.1' --http_service_type=nginx --aegir_host=aegir.ld --working-copy --client_email=${EMAIL} aegir.ld <<END
root
y
END
fi
if [[ $(wget http://aegir.ld > /dev/null 2>&1 | egrep "HTTP" | awk {'print $6'}) != "404" ]] ; then
rm index.html > /dev/null 2>&1
# printf "\n########\n# Changing some hostmaster varibles to defaults we like..\n########\n"
# drush @hostmaster vset hosting_feature_platform_pathauto 1
# drush @hostmaster vset hosting_feature_cron 0
# drush @hostmaster vset "hosting_feature_Cron queue" 0
# drush @hostmaster vset "hosting_feature_Hosting queue daemon" 1
# drush @hostmaster vset hosting_feature_queued 1
# drush @hostmaster vset hosting_queue_tasks_enabled 0
# drush @hostmaster vset hosting_require_disable_before_delete 0
printf "\n########\n# Download and start hosting queue daemon launch agent..\n########\n"
curl https://gist.githubusercontent.com/BrianGilbert/9226172/raw/509f69711a5a2c61ec41b6d3b690a72096b26703/org.aegir.hosting.queued.plist > ~/Library/LaunchAgents/org.aegir.hosting.queued.plist
launchctl load -w ~/Library/LaunchAgents/org.aegir.hosting.queued.plist
curl https://gist.githubusercontent.com/BrianGilbert/9282670/raw/b5125abb144f683e75ea68696f8bf606b1631d07/nginx_xhprof.ld.conf > /var/aegir/config/server_master/nginx/pre.d/nginx_xhprof.ld.conf
printf "\n########\n# Installing registry_rebuild drush module\n########\n"
drush dl registry_rebuild
printf "\n########\n# Symlinking platforms to ~/Sites/Aegir..\n########\n"
mkdir -p ~/Sites/Aegir
rmdir /var/aegir/platforms
ln -s ~/Sites/Aegir /var/aegir/platforms
printf "\n########\n# Enabling SSL for local sites..\n########\n"
mkdir -p /usr/local/etc/ssl/private;
openssl req -x509 -nodes -days 7300 -subj "/C=US/ST=New York/O=Aegir/OU=Cloud/L=New York/CN=*.aegir.ld" -newkey rsa:2048 -keyout /usr/local/etc/ssl/private/nginx-wild-ssl.key -out /usr/local/etc/ssl/private/nginx-wild-ssl.crt -batch 2> /dev/null;
curl https://gist.githubusercontent.com/BrianGilbert/7760457/raw/267e582f7f5f7f87f194f508c745da353612e751/nginx_wild_ssl.conf > /var/aegir/config/server_master/nginx/pre.d/nginx_wild_ssl.conf;
sudo /usr/local/bin/nginx -s reload;
printf "# Setting known network interfaces to use 127.0.0.1 for DNS lookups,this may throw errors, that's ok...\n########\n"
sudo networksetup -setdnsservers AirPort 127.0.0.1
sudo networksetup -setdnsservers Ethernet 127.0.0.1
sudo networksetup -setdnsservers 'Thunderbolt Ethernet' 127.0.0.1
sudo networksetup -setdnsservers Wi-Fi 127.0.0.1
say "Open your network settings to confirm DNS for your active network device is set to 127.0.0.1, or else things will not work properly"
echo "
########
# Open your network settings now and confirm the DNS for
# your active device is set to 127.0.0.1, or else things
# will not work properly later in the script.
########"
printf "\n########\n# Saving some instructional notes to ~/Desktop/YourAegirSetup.txt..\n########\n"
say "saving some instructional notes to your desktop"
echo "Hi fellow Drupaler,
Here is some important information about your local Aegir setup.
Creating and maintaining this takes a lot of time, you can help:
https://liberapay.com/briangilbert/donate
The date.timezone value is set to Melbourne/Australia you may want
to change it to something that suits you better.
Your Aegir sites are accesible using http and https, though you
will need to trust the certificate in your browser.
To change it, depending on what versions of php you installed,
type each of these in terminal and search for Melbourne:
nano /usr/local/etc/php/5.3/php.ini
nano /usr/local/etc/php/5.4/php.ini
nano /usr/local/etc/php/5.5/php.ini
nano /usr/local/etc/php/5.6/php.ini
Then restart nginx using:
sudo /usr/local/bin/nginx -s reload
php53 is currently active, to switch the active version of php use
the following commands:
go53
go54
go55
go56
xdebug settings are configured as follows:
xdebug.max_nesting_level = 200
xdebug.profiler_enable = 1
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_name = xdebug-profile-cachegrind.out-%H-%R
xdebug.profiler_output_dir = /tmp/xdebug/
xdebug.remote_autostart = 0
xdebug.remote_enable=1
xdebug.remote_connect_back = 1
xdebug.remote_port = 9001
xdebug.remote_host = localhost
xdebug.var_display_max_children = 128
xdebug.var_display_max_data = 2048
xdebug.var_display_max_depth = 32
The xdebug configuration files can be found at:
/usr/local/etc/php/5.3/conf.d/ext-xdebug.ini
/usr/local/etc/php/5.4/conf.d/ext-xdebug.ini
/usr/local/etc/php/5.5/conf.d/ext-xdebug.ini
/usr/local/etc/php/5.6/conf.d/ext-xdebug.ini
xhprof is setup for use with the devel module, configure and enable
it using the following settings:
Enable profiling of all page views and drush requests = checked
xhprof directory = /usr/local/opt/xhprof
XHProf URL = http://xhprof.ld
I have tried to set DNS for commonly named network interfaces check
all of your interfaces to ensure that the DNS server is set to:
127.0.0.1
New Aegir platforms go in ~/Sites/Aegir/
If you configured mail sending email you will also have received an
email with a one time login link for your Aegir site.
If you elected to setup ApacheSolr the default port has been changed
to match the port used by Barracuda [1].
You can access the Solr4 WebUI at:
http://localhost:8099/solr/
When you set up search_api_solr you will need to copy the contents
of the 4.x version of the solr-conf files that come with the module
into each core you set up, eg.:
$(brew --prefix solr)/example/multicore/core0/conf
You can run solr by executing the following in a terminal:
solr start -e multicore -p 8099
To stop solr:
solr stop -all
If things are not working after an OS update update then try the
following steps, reset DNS to 127.0.0.1 and run following command:
sudo mkdir -p /var/log/aegir
Then start nginx:
sudo /usr/local/bin/nginx
Please take the time to say thanks:
http://twitter.com/BrianGilbert_
Creating and maintaining this takes a lot of time, if it makes life easier
for you please consider making a donation:
Paypal: http://rl.cm/osxaegirdonation
Librepay: https://liberapay.com/briangilbert/donate
1. https://drupal.org/project/barracuda
" >> ~/Desktop/YourAegirSetup.txt
printf "\n########\n# Attempting to email it to you as well..\n########\n"
say "emailing it to you as well"
mail -s 'Your local Aegir setup' ${EMAIL} < ~/Desktop/YourAegirSetup.txt
printf "\n########\n# The date.timezone value in /usr/local/etc/php/[version]/php.ini\n# Is set to Melbourne/Australia\n# You may want to change it to something that suits you better.\n########\n"
# printf "The mysql root password is set to 'mysql' and login is only possible from localhost..\n"
printf "\n########\n# Double check your network interfaces to ensure their DNS server\n# is set to 127.0.0.1 as we only tried to set commonly named interfaces.\n########\n"
printf "\n########\n# Please say thanks @BrianGilbert_ http://twiter.com/BrianGilbert_\n########\n"
printf "\n########\n# Finished $(date +"%Y-%m-%d %H:%M:%S")\n########\n"
open http://rl.cm/osxaegirwoot
sleep 30;open http://rl.cm/OSXAegirDonation
else
echo "\n########\n# Something has gone wrong!\n# The aegir.ld site isn't accesible.\n# you'll probably need to rerun the installation.\n########\n"
fi
} 2>&1 | tee -a ~/Desktop/aegir-install-logfile-$(date +"%Y-%m-%d.%H.%M.%S").log
echo "###fin###"
exit